accessories actual size

PDA cable
EDX-PDA

iDrive
AC variable speed economy drives
options and ordering codes
EDX - 075 iDrive Power (kW) 0.2 020 0.4 040 0.75 075 1.5 150 2.2 220 100v 200v 400v 600v 1 2 4 6 E 1 3 1Phase 3 Phase

0.2-2.2kW
E

N4 N4S

Remote keypad (2m cable)

EDX-LED

IP20 NEMA4 (IP65) As N4 plus control switches

I/O card (2 in 1 out expandable)

EDX-IO

No Filter EMC Filter built in

RS485
EDX-485

Example shown: EDX-075-43-E = 0.75kW, 400V, 3 phase with integrated EMC filter

RS232
EDX-232

Memory pack
EDX-MP

DIN rail or screw mountable

IMO Precision Controls Limited 1000 North Circular Road Staples Corner, London NW2 7JP United Kingdom Tel: +44 (0)20 8452 6444 Fax: +44 (0)20 8450 2274 Email: [email protected] Web: www.imopc.com IMO Deutschland Fr weitere Einzelheiten zu IMO Agenten und Distributoren in Ihrer Nhe schreiben Sie bitte ein E-mail an folgende Adresse: [email protected] IMO Jeambrun Automation SAS Avenue du Mistral, ZI Athlia IV 13705 La Ciotat Cedex, France Tl : 04 42 83 82 00 Fax : 04 42 83 82 75 Email : [email protected] Web : www.imopc.fr IMO Italia Viale A. Volta 127/a 50131 Firenze, Italia Tel: 800 783281 Fax: 800 783282 Email: [email protected] Web: www.imopc.it

TE

remote keypad, PDA or PC

side-by-side installation

TE

GUARAN

GUARAN

GUARAN

TE

programming options

space saving

Cam Switches Din Terminals Drives Enclosures Fieldbus remote I/O Isolators & Switch Fuses MCB & RCD Motor Circuit Breakers Motor Control Gear Panel Meters Relays Signal Conditioning Sockets Timers Transformers & Power Supplies

Drives Intelligent Terminals/HMI Limit Switches Photoelectric Switches PLCs Proximity Switches Temperature Controls

Data Acquisition & Control Drives Intelligent Terminals/HMI Limit Switches Photoelectric Switches Proximity Switches PLCs Signal Conditioning Temperature Controls

Lightguards Safety Limit Switches Safety Relays

Jaguar VXM 0.37-500kW Jaguar VXSM 0.37-7.5kW Jaguar CUB 0.37-4kW

All IMO products are tried, tested and approved to relevant international quality standards

Audible devices Chip-on-Board Device programmers LEDs & 7 seg. displays PCB Terminal blocks Relays - automotive Relays - power Relays - signal Switches

YEA

YEA

YEA

iDrive: ultra-low cost, micro inverters for small AC motors 0.2-2.2kW...

iDrive is the ultimate low-cost variable speed ac drive from the home of the world famous Jaguar range. Ideal for small 3-phase motor control applications requiring flexibility, reliability and precision, iDrive is available from stock in single phase 230V or three phase 400V input models. iDrives use only twelve basic set-up parameters for standard out-of-the box operation, but for higher performance applications the user can unlock and use the hidden advanced parameter set. An internal First Environment EMC filter makes the iDrive suitable for virtually every industrial, commercial or domestic application without the need for additional equipment. Compact, powerful, and user friendly. There is really only one small ac drive that you need to ask for iDrive from IMO Integrated Class B EMC filter CE and UL/cUL approvals
YEA

specification

dimensions (mm) and connections

4 x 4.5 Special Order only 110V/1 Model data EDX-xxx-11 020 040 075 Horsepower (hp) 0.25 0.5 1 Nominal Motor Capacity (kW) 0.2 0.4 0.75 Rated Output Current (A) 1.7 3.1 4.2 Rated Capacity 0.53 0.88 1.60 Max. Input Voltage 1 100-120V +10%, -15% (50/60Hz) 0V Max. Output Voltage 3 / 0 to V input Input Current (A) 7.1 12.2 17.9 Net Weight (kg) 0.62 0.68 0.72 Allowable momentary power 1.0 1.0 1.0 loss time (second) Frame size (see dims) 1 1 1 Enclosure IP20 220V/1 EDX-xxx-21-E 040 075 150 0.5 1 2 0.4 0.75 1.5 3.1 4.2 7.5 0.88 1.60 2.90 1 200-240V +10%, -15% (50/60Hz) 3 / 0 to V input 5.4 10.4 15.5 0.73 0.73 1.25 1.0 1 1.0 1 IP20 2.0 2 Special Order only 220V/3 EDX-xxx-23 040 075 150 0.5 1 2 0.4 0.75 1.5 3.1 4.2 7.5 0.88 1.60 2.90 3 200-240V +10%, -15% (50/60Hz) 3 / 0 to V input 4.0 6.4 9.4 0.61 0.66 0.95 1.0 1 1.0 1 IP20 2.0 2 440V/3 EDX-xxx-43-E 075 150 220 1 2 3 0.75 1.5 2.2 2.3 3.8 5.2 1.7 2.9 4.0 3 380-480V +10%, -15% (50/60Hz) 3 / 0 to V input 3 4.8 6.6 1.68 1.7 1.73 1.0 2 2.0 2 IP20 2.0 2 Frame 1 Frame 2 A 67 108 B 77 118 C 130.5 148 D 128.45 144 Frame 1: 1 110V/220V and 3 220V models up to 0.75kW Frame 2: 1 and 3 220V from 1.5kW and all 3 440V models

iDrive

Easy to install Basic/Advanced set-up DIN rail mounting as standard 1-phase and 3-phase variants V/F and sensorless vector modes High starting torque PID control as standard Keypad potentiometer 8 pre-set speeds DC braking as standard IP65/NEMA 4 models available Side-by-side mounting Thermostatic cooling fan Comprehensive inverter and motor protection functions Remote Keypad options with full copy facility Optional multi-function card PNP or NPN selectable RS232/485 option cards Modbus RTU/ASCII PC software (option) PDA (iPAQ) software (option)

020 0.25 0.2 1.7 0.53

220 3 2.2 10.5 4.00

020 0.25 0.2 1.7 0.53

220 3 2.2 10.5 4.00

123.5

132

IMO

GUARAN

TE

4.3 0.71 1.0 1

21 1.3 2.0 2

3.0 0.61 1.0 1

12.2 1 2.0 2

D 8 Braking Unit (optional)

A B

Common specification
Power Source 110V model: 100~120v +10% / -15%, 50/60Hz 220V model: 200~240v +10% / -15%, 50/60Hz 440V model: 380~480v +10% / -15%, 50/60Hz Selectable V/f or Vector control (starting torque: 100% / 3Hz) 0~200Hz Digital: 0.1Hz (0~99.9Hz) / Hz(100~200Hz; Analogue: 0.6Hz / 60Hz Set with ML keys or the VR on the keypad. Alternatively use the UP/DOWN (Motorised Pot) or the AIN signal 7 segment* 3; display frequency / DC voltage / output voltage / output current / inverter parameters error code / program version / PID feedback 1. External variable resistor / 0-10V / 0-20mA / 2-10V / 4-20mA 2. Motorised Pot (UP/DOWN) Upper/lower frequency limits and two-stage prohibited frequencies 4~16KHz (factory setting 10KHz, 10KHz or more De-rating 0.1~999 sec, two-stage acc./dec. time could be changed By MFIT/Acc/Dec disable NPN/PNP toggle* four points; two points optional (S1~S4 Built in, S5~S6 option) Terminal * 1 point (1a terminal)---setting to Multi-function output. Optional Multi-function Photo Output* 1 point (open collector 24V, 600mA) Setting to speed command and PID feedback signal/MFIT S7 (PNP Mode) Instantaneous power loss restart, Speed search, fault restart, DC brake Torque boost, 2/3 wire control and PID function RS-485 Option Card: Modbus RTU/ASCII mode, 4800~38400 bps max. 254 stations. PC-PDA software link 0-95% Relative humidity (non-condensing) 150% / 1 min -10C to +50C (in distributor) IP20; -10~40C IP65 Over current, over voltage, low voltage, overload, momentary power loss and restart stall prevention for acceleration/deceleration/operation, short-circuit protection for output/grounding fault, reverse restriction, restrictions for direct start after power up and error recovery UL/cUL, CE Integrated Class B (to EN61800-3 / First Environment, unrestricted sales)

Control Mode Frequency Range Frequency Setting Resolution Frequency Setting Method Display Functions External Frequency Setting Output frequency limit function Carrier Frequency Acc/Dec control DI (Digital Output) DO (Digital Output) AI (Analogue Input) Other Function Communication Control Humidity Overload Protection Operating Temperature Other Protection Function

Power terminal 1 100-120V 1/3 200-240V 3 380-480V

L1 (L) L2 L3(N) PE

T1 T2 T3 PE

PNP common Multi function digital input DC 12/24V signal NPN common Multi function analogue input Set speed PID feed back input Multi function analogue output 0-10VDC

24V S1 S2 S3 S4 COM

RA RB

Multi functional relay output SW1: digital signal selection (NPN/PNP) SW2: Control signal selection (0-10V/4-20mA) Option interface Multi function I/O card (2 in, 1 out) Remote Keypad

1 2

10K

+10V Ain COM FM 24V/0.6A

S5 S6 T+ T-

FM

International Conformance EMC