Scribd
Upload
217 views2 pages

Portable Submersible Pump Guide

This document summarizes the specifications of the M-100/120 series portable electric submersible pumps for corrosive and abrasive applications. The pumps feature stainless steel construction materials for maximum corrosion resistance, including stainless steel for the strainer, shaft, impeller, outlet and hardware. They also have tungsten carbide mechanical seals and are equipped with sacrificial zinc anodes for use in saline fluids. Motors are induction continuous rated from 1.3 to 2 HP at various voltages and frequencies, and materials of construction include stainless steel, nitrile rubber, aluminum and brass components.

Uploaded by

alberthf_1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views2 pages

Portable Submersible Pump Guide

This document summarizes the specifications of the M-100/120 series portable electric submersible pumps for corrosive and abrasive applications. The pumps feature stainless steel construction materials for maximum corrosion resistance, including stainless steel for the strainer, shaft, impeller, outlet and hardware. They also have tungsten carbide mechanical seals and are equipped with sacrificial zinc anodes for use in saline fluids. Motors are induction continuous rated from 1.3 to 2 HP at various voltages and frequencies, and materials of construction include stainless steel, nitrile rubber, aluminum and brass components.

Uploaded by

alberthf_1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

M-100/120 SERIES

PORTABLE ELECTRIC SUBMERSIBLE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS

M-100/120 DESIGN ADVANTAGES


Stainless Steel Strainer, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard)

1.3 HP (1kW) M 100SM / M 100M (1 or 3 Phase)

2"(50mm) NPT or Hose

1.5 HP (1.1kW) M 106SM / M106M (1 or 3 Phase) 60Hz 2 HP (1.5kW) M 120M

Tungsten Carbide/Tungsten Carbide mechanical seal


with Secondary Inner Lip Seal. Mechanical Seal in wholly enclosed pressure compensated oil chamber. Nitrile Rubber-lined Diffuser Optimizes efficiency throughout the life of the pump. Optional Polyurethane Diffusers are available. Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment. Available in complete 316 Stainless Steel Construction with Silicon Carbide/Silicon Carbide Mechanical Seals and Viton Elastomers.

2"(50mm) NPT or Hose

2"(50mm) NPT or Hose

2 HP (1.5kW) M 126M (60 Hz)

2"(50mm) NPT or Hose

03.10.Rev.0

M-100/120 SERIES
1.3HP(1kW) / 1.5HP(1.1kW) / 2HP(1.5kW)

M-100/120 SERIES
MATERIALS OF CONSTRUCTION AND ENGINEERING DATA
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'F' (155C) Speed: 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating: 1.3/1.5/2HP @ 60Hz, 1/1.5kW @ 50Hz Full Load Current FLA: 2/2.2/3.4 Amps @ 460v, 2.3/3.9 @ 400v Three Phase 19Amps @ 115v, 10Amps @ 220v Single Phase Max. temperature of the pump liquid : 104F/40C Max. start/stop per hour : 15

POWER SUPPLY
1 & 3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination.(115/208/220/230/380/415/460/575/1000V)

BALL BEARINGS
The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.

SHAFT SEAL
Tungsten Carbide/Tungsten Carbide Outer Mechanical seal with secondary Inner Lip Seal wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT PERFORMANCE CURVES


Epoxy coated Extruded Aluminum Outer Casing Epoxy coated Extruded Aluminum Stator Casing Nitrile Rubber Lined Diffuser. Polyurethane Optional. Shaft: 431 Stainless Steel Hardware: 304 Stainless Steel Impeller: Nitride Hardened 410SS to 56HRC is Standard. pH Range: 5 - 8

STRAINER
304 Stainless Steel with 1/4 (6mm) round holes.

SUBMERGENCE
Submergence below liquid surface min 5 (127mm) max. 65 (20m).

WEIGHTS (Approx. without cable)


M 100: M 100S: M 106: M 106S: M 120: M 126: 35lbs. (16Kg) 39lbs. (18Kg) 35lbs. (16Kg) 39lbs. (18Kg) 39lbs. (18Kg) 39lbs. (18Kg)

Due to continuous product development, specifications are subject to change without notice. 03.10.Rev.0

You might also like