M101
2014 AS America Inc.
To Be Specifed:
Color: White Bone Linen
Seat:
American Standard #5901.100 Heavy duty
open front less cover
American Standard #5905.100 Extra heavy
duty open front less cover
Flushometer Valve:
1.6 gpf:
Sensor-Operated: American Standard Selectronic
DC Power #6065.161.002 (Top Spud)
Sensor-Operated: American Standard Selectronic
AC Power #6067.261.002 (Back Spud)
Manual: American Standard #6047.161.002
(Top Spud)
1.28 gpf:
Sensor-Operated: American Standard Selectronic
DC Power #6065.121.002 (Top Spud)
Sensor-Operated: American Standard Selectronic
AC Power #6067.221.002 (Back Spud)
Manual: American Standard #6047.121.002
(Top Spud)
1.6 / 1.1 gpf Dual Flush:
Sensor-Operated: American Standard Selectronic
DC Power #6065.761.002 (Top Spud)
MADERA
FloWise
15" HEIGHT
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA with EVERCLEAN
MADERA
FloWise
15" HEIGHT ELONGATED
with EVERCLEAN
Floor mount fushometer valve toilet
Vitreous china
High Efficiency, Low Consumption. Operates in
the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf)
Meets defnition of HET (High Efficiency Toilet)
when used with a high efficiency fush valve
(1.28 gpf or 1.6 / 1.1 gpf dual fush)
Permanent EverClean
surface inhibits the growth
of stain and odor-causing bacteria, mold,
and mildew on the surface
Fully glazed 2-1/8" trapway
Elongated bowl
10" or 12" roughing-in
15" rim height
Condensation channel
Powerful direct-fed siphon jet action
10" x 12" water surface area
1-1/2" inlet spud
2 bolt caps
100% factory fush tested
3451.001 Elongated bowl only, top spud
3452.001 Elongated bowl only, top spud with
slotted rim for bedpan holding (White only)
3453.001 Elongated bowl only, back spud
3455.001 Elongated bowl only, back spud with
slotted rim for bedpan holding (White only)
System MaP* Score:
1,000 grams of miso @ 1.1 gpf, 1.28 gpf or 1.6 gpf
when used with an American Standard fush valve
* Maximum Performance (MaP) testing performed by IAPMO
R&T Lab. MaP Report conducted by Veritec Consulting, Inc.
and Koeller and Company.
Component Parts:
047007-0070A Inlet Spud (furnished with bowl)
481310-100 Bolt caps with retainers
(furnished with bowl)
Nominal Dimensions:
718 x 356 x 381mm
(28-1/4" x 14" x 15")
Fixture only, less seat and fush valve
Recommended working pressurebetween
25 psi at valve when fushing and 80 psi static
Compliance Certifcations -
Meets or Exceeds the Following Specifcations:
ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous
China Fixtures
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Rev. 2/14
M102
2014 AS America Inc.
MADERA
FloWise
15" HEIGHT
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA with EVERCLEAN
NOTES:
PRODUCT 3451 AND 3453 SHOWN, 3452 AND 3455 SAME EXCEPT
WITH SLOTTED RIM FOR BED PAN HOLDING.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM
FINISHED WALL TO C/L OF OUTLET.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR
12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.
REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of fxtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
1-1/2"
SPUD
121mm
(4-3/4")
673mm
(26-1/2")
238mm
(9-3/8")
381mm
(15")
470mm
(18-1/2")
356mm
(14")
338mm
(13-5/16")
150mm
(5-7/8")
254mm
(10")
13mm
(1/2")
25mm
(1")
102mm
(4")
718mm
(28-1/4")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P.T. OR 1"
C.W.T. SUPPLY
TO FLUSH VALVE
238mm
(9-3/8")
381mm
(15")
400mm
(15-3/4")
470mm
(18-1/2")
356mm
(14")
338mm
(13-5/16")
150mm
(5-7/8")
254mm
(10")
13mm
(1/2")
76mm
(3")
718mm
(28-1/4")
C/L OF SEAT POST HOLES
140mm (5-1/2") CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
3451.001/3452.001
3453.001/3455.001
Rev. 2/14
