PRODUCT DESCRIPTION

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 1

www.anite.com/nemo [email protected]
CONTENTS
1 NEMO HANDY OVERVIEW 3
1.1 NEMO HANDY CONFIGURATIONS 4
1.2 KEY FEATURES OF NEMO HANDY 2.30 5
1.3 HARDWARE AND SOFTWARE REQUIREMENTS 6
2 NEMO HANDY USER INTERFACE 7
2.1 CUSTOMIZABLE USER INTERFACE 9
3 WORKING WITH NEMO HANDY 10
3.1 REAL-TIME STATISTICS 15
3.2 APPLICATION TESTING 16
3.2.1 VOICE QUALITY 16
3.2.2 VOICE CALLS 17
3.2.3 VIDEO CALLS 17
3.2.4 HTTP/FTP CONNECTIONS 18
3.2.5 SMS/MMS MESSAGES 18
3.2.6 HTML/WAP BROWSING 19
3.2.7 EMAIL 19
3.2.8 PING 19
3.3 INDOOR MEASUREMENTS 20
3.4 FORCING FEATURES IN NEMO HANDY 21
3.4 SCRIPTS 22
3.5 NOTIFICATIONS 23
4 POST-PROCESSING 24
5 NEMO PRODUCTS 25
6 CONTACT INFORMATION 26

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 2




www.anite.com/nemo [email protected]
2007 Anite Finland Ltd. All rights reserved.
This product description, as well as the software described in it, is furnished under license and
may only be used or copied in accordance with the terms of such license. The information in
this paper is intended for informational use only and is subject to change without notice. Anite
Finland Ltd. assumes no responsibility or liability for any errors or inaccuracies that may appear
in this material.
Except as permitted by such license, no part of this publication may be reproduced or
transmitted in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of Anite Finland Ltd.
Nemo Outdoor, Nemo Analyze, Nemo Handy, Nemo Q, and Nemo Autonomous are
trademarks of Anite Finland Ltd.
Windows2000 and WindowsXP are registered trademarks of the MicrosoftCorporation.

Last Edited: J une 2007
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 3




www.anite.com/nemo [email protected]
1 NEMO HANDY OVERVIEW
Nemo Handy is a Symbian-based light-weight and portable engineering tool for testing voice
quality based on Mean Opinion Score, testing mobile application QoS and QoE, and measuring
the air interface of EGSM/GPRS/EDGE/WCDMA/HSDPA/Wi-Fi 802.11b/g wireless networks.
Nemo Handy supports application testing of voice quality, voice and video calls, WAP and
HTML browsing, email, SMS and MMS messaging, FTP and HTTP connections and ping.
Supported terminals include Nokia N95, N80 and N75.
As its name suggests, Nemo Handy is a handy tool for every network and quality engineer. It
can be used both as a regular phone with Nemo Handy performing measurements in the
background and as an active tester of mobile applications with configurable scripts. With Nemo
Handy you can perform measurements in buildings and locations where big bulky measurement
equipment is not a practical solution. Nemo Handy can be equipped with a Bluetooth GPS
receiver to collect geographical coordinates, and with Nokia N95, Nemo Handy can also use the
terminals integrated GPS receiver.
Measurement results provide a full picture of the radio interface and the quality of the tested
applications. The exact and detailed radio interface data recorded with Nemo Handy is optimal
for network planning, roll-out, tuning, verification, optimization, and maintenance purposes.
Recorded application performance metrics are useful in benchmarking and QoS/QoE evaluation
of mobile services. Continuous recording of radio interface metrics ensures that the reasons
behind bad service quality can always be found.
The measurement data can be easily converted to the standard Nemo File Format and viewed
with Nemo Outdoor and Nemo Analyze developed by Anite Finland Ltd., as well as with any
other tool supporting the Nemo File Format.


















Nemo Handy is an
extremely
lightweight and
portable Symbian-
based
measurement tool.
Nemo Handy can be
equipped with a
Bluetooth GPS
receiver and the Nemo
Handy measurement
data can be exported
to Nemo Outdoor and
Nemo Analyze.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 4




www.anite.com/nemo [email protected]
1.1 NEMO HANDY CONFIGURATIONS
There are three alternative configurations available for Nemo Handy.

Handy Field Test
Handy FT includes all available graphical displays, but does not provide the logging or GPS
capabilities, nor is the scripting feature available in Handy FT. Handy FT is an optimal tool for
site commissioning and for technicians.

Handy
In addition to the graphical UI, the standard version of Nemo Handy provides data logging and
GPS support. However, scripting and other advanced features are not available in the standard
version of Handy. Handy is an optimal tool for occasional troubleshooting and testing purposes.

Handy Professional
In addition to the graphical UI, GPS, and logging, Handy Professional provides the scripting
feature, the automatic file transfer functionality, and the indoor map feature. Hence, Handy Pro
is suitable for both troubleshooting and light drive testing.

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 5




www.anite.com/nemo [email protected]
1.2 KEY FEATURES OF NEMO HANDY 2.30
Symbian-based application
Supports Nokia N95, N80 and N75 terminals
Standard 1 GB MiniSD card can store up to 100 hours of measurement data
Extremely lightweight and portable
Graphical, fully customizable and user-friendly user interface
Possibility to view serving channel information on every page in a user-configurable
form
Can be equipped with a Bluetooth GPS receiver to collect geographical coordinates
With Nokia N95 terminal, the integrated GPS receiver can be used in collecting
geographical coordinates
Supports measurements on EGSM/GPRS/EDGE/WCDMA/HSDPA/Wi-Fi 802.11b/g
networks
Voice quality measurements based on Mean Opinion Score
Automated service testing with scripts: voice quality, voice call, video call, FTP,
HTTP, HTML browsing, WAP browsing, send/receive email, MMS, SMS, and ping
Scripts can be created and modified with Nemo Handys built-in script editor
Real-time statistics
Log file auto-upload to email or FTP server
Indoor map with markers
Forcing commands for channel lock, scrambling code lock, system lock, and cell
barring
User-definable UI font size
Textual markers
Background light on/off
Circular log file
Display freeze
Online help
User-definable audio notifications with speech generator

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 6




www.anite.com/nemo [email protected]
1.3 HARDWARE AND SOFTWARE REQUIREMENTS
For Nemo Handy:
Nemo Handy compatible Nokia N80/N75 mobile with free memory for FTP downloads
MiniSD card for storing measurement files
MiniSD memory card adapter
MiniSD memory card reader

For post-processing (Nemo Outdoor, Nemo Analyze):
PC (IBM or Dell recommended) with Windows

2000 or Windows

XP Professional
Pentium III processor, minimum 850 MHz, preferably 1 GHz
128 MB RAM minimum, 512 MB RAM recommended
100 MB of free hard disk space for installation and use; 1 GB recommended
USB port for memory card reader
Display resolution 1024 x 768 or higher with 256 colors
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 7




www.anite.com/nemo [email protected]
2 NEMO HANDY USER INTERFACE
Nemo Handy offers a fully configurable graphical user interface optimized for small screen
devices. During measurement, users can easily monitor the results and the progress of the
measurement process in real time. Application testing and RF parameter displays can be
viewed simultaneously. The background light can be switched on and off. User can also define
the UI font size.















It is possible to display the serving channel information on every page. When this option is
selected, the Nemo Handy logo is replaced with the information. The user can also configure
what information is to be shown on the serving channel information display.


Line views display
selected parameters
in numerical and
graphical format.
The scales change
according to the
selected parameter
and scales can be
zoomed in and out
with the auto-scaling
function.
Bar views display
selected
parameters in
numerical and
graphical format.
Bars are colored
according to
threshold values.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 8




www.anite.com/nemo [email protected]
Measurement results can be displayed in different types of windows including text, bar and line
graphs and neighbor graph (bar, line, and inter-system bar). It is also possible to stack bar and
line graphs. Bar graph scales can be shown for each bar simultaneously. Integer parameters
can be shown in decimal and in octal format. The Nemo Handy icon shows the current logging
status.














When logging is stopped, the user can either save the file with the default name (Keep), save
the file with a new name (Rename), delete the file (Delete), or send it to an FTP server (Send).
Log file recording is automatically stopped when memory card is full and no more data can be
recorded.


NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 9




www.anite.com/nemo [email protected]
2.1 CUSTOMIZABLE USER INTERFACE
All Nemo Handy measurement data displays are fully user-configurable. The views can be
edited with the Nemo Handy Configuration Editor tool that is included in the Nemo Handy
package. All display settings are stored in an .xml file.


NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 10




www.anite.com/nemo [email protected]
3 WORKING WITH NEMO HANDY
Nemo Handy 2.x measurement system consists of a Nokia N80 test mobile with the Nemo
Handy SW, a Bluetooth GPS receiver, a PC with the Windowsoperating system, and the
Nemo Handy File Converter software which converts the log files to the Nemo File Format.
All network parameters supported by the Nemo Outdoor drive test tool, i.e., Nemo Outdoor and
Nokia mobile handler, including signaling messages are stored in the Nemo Handy log file, and
are available for post-processing in the Nemo File Format, for example, with Nemo Outdoor and
Nemo Analyze. Post-processing can be done also with any other tool supporting the Nemo File
Format. You can use the Nemo Handy mobile as a regular phone while Nemo Handy is logging
in the background: you can make calls, send SMS/MMS messages, browse web pages, send
and receive email etc. Nemo Handy makes all of these connections measurable. It provides
real-time statistics on voice and video calls, PDP context, FTP/HTTP connections, SMS/MMS
messaging, HTML/WAP browsing, email sending/receiving, ping, and inter-system cell
reselections and handovers. It is also possible to add textual markers to log files while running
measurements at the same time.
All necessary RF parameters are logged for a full set of KPI calculations. The parameters listed
below are parameters that are displayed in the Nemo Handy views. However, the user can also
modify the existing views to show other parameters, or create new views.
Note that Nemo Handys support for some individual parameters varies according to terminal.
For a detailed list of supported parameters for particular terminal models, please refer to the
terminal-specific Nemo Handy datasheets.

General:
Cellular system
LAC
MNC
CI
MCC
Packet data technology
Application data throughput UL/DL
GPS information:
o Status
o Latitude and longitude
o Height
o Distance
o Velocity
o Number of satellites

GSM/GPRS/EDGE:
Timing advance
RX quality (full and sub)
RX level (full and sub)
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 11




www.anite.com/nemo [email protected]
MS power level
MS in dBm
Channel and BSIC for serving and neighbor channels
Hopping channel list
Number of timeslots UL/DL
C1/C2
BEP mean class 8-PSK
BEP mean class GMSK
C value
Packet channel coding UL/DL
Used timeslots (UL/DL)
AMR parameters
o Channel type
o Link quality estimate (LQE)
o AMR initial codec
o AMR ICMI
o AMR codecs
o AMR codec UL/DL
o AMR hysteresis 1-3
o AMR threshold 1-3
o Voice codec distribution
o Coding scheme distribution
C/I
UL/DL DTX
Link quality estimate
FER
MAIO
HSN
RLT
GSM neighbors sorted by RXL
GSM cell info:
o Emergency call support
o IMSI attach/detach procedure allowed
o Half rate channels supported
o C2 broadcast supported
o SI 7&8 broadcast supported
o Cell broadcast supported
o Call re-establish supported
o Early class mark sending supported
o 2-ter messages supported
o Multi band reporting
o GPRS supported
o EDGE supported

WCDMA:
Channel
RRC state
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 12




www.anite.com/nemo [email protected]
Scrambling code, RSCP and Ec/N0 for active and monitored sets
Carrier RSSI
TX power
BLER DL
SIR target/SIR
Percentage of UL/DL power up commands
Compressed mode indication
Initial TX power
RACH TX power
Preamble count
AICH status
HSDPA:
MAC BLER
CQI
Modulation
16QAM/QPSK ratio %
Coding
Number of codes
HS-DSCH activity rate
MAC throughput DL
Transport block size (average)
WLAN:
SSID
Channel number
RSSI
Access point MAC address
Application throughput
STATISTICS:
GSM to UMTS:
o Handover
o CREL during data
UMTS to GSM:
o Handover
o CREL during data
Voice call:
o Attempt
o Failed
o Connected
o Disconnected
o Dropped
o Success rate
o Cut-off rate
o Setup time avg.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 13




www.anite.com/nemo [email protected]

Video call:
o Attempt
o Failed
o Connected
o Disconnected
o Dropped
o Success rate
o Cut-off rate
o Setup time avg.
PDP context:
o Activation attempt
o Activation failed
o Activated
o Deactivated
o Dropped
o Activation success rate
o Cut-off rate
o Activation time avg.
FTP:
o Connection attempt
o Connection attempt failed
o Connection attempt success
o Disconnected
o Connection dropped
o File transfer attempt
o File transfer success
o File transfer failed
o Connection success rate
o Connection cut-off rate
o File transfer success rate
HTTP:
o Connection attempt
o Connection attempt failed
o Connection success
o Disconnected
o Connection dropped
o File transfer attempt
o File transfer success
o File transfer failed
o Connection cut-off rate
o Connection success rate
o File transfer success rate
SMTP:
o Connection attempt
o Connection failed
o Connection connected
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 14




www.anite.com/nemo [email protected]
o Connection disconnected
o Connection dropped
o File transfer attempt
o File transfer success
o File transfer failed
o Connection cut-off rate
o Connection success rate
o File transfer success rate
POP3:
o Connection attempt
o Connection failed
o Connection connected
o Connection disconnected
o Connection dropped
o File transfer attempt
o File transfer success
o File transfer failed
o Connection cut-off rate
o Connection success rate
o File transfer success rate
Ping:
o Ping attempts
o Ping failed
o Ping succeeded
o Ping success rate
o Round trip time avg.
SMS:
o SMS attempts
o SMS failed
o SMS succeeded
o SMS success rate
MMS:
o MMS attempts
o MMS failed
o MMS succeeded
o MMS success rate

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 15




www.anite.com/nemo [email protected]
3.1 REAL-TIME STATISTICS
Nemo Handy provides a real-time view of statistics on voice/video calls, PDP context,
FTP/HTTP connections, SMS/MMS messaging, HTML/WAP browsing, email sending/receiving,
and ping. The real-time results of both manual and script-aided testing can be monitored
throughout the duration of the connection.
















NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 16




www.anite.com/nemo [email protected]
3.2 APPLICATION TESTING
Nemo Handy supports several built-in application testing options. It is possible to test voice
quality, voice and video calls, FTP/HTTP data transfers, HTML/WAP browsing, SMS/MMS
messaging, email sending and receiving, and ping. The QoS/QoE KPIs logged by Nemo Handy
include connection setup delay, download time, time-to-content delay, throughput, etc.
3.2.1 VOICE QUALITY
Nemo Handy supports both manual and scripted voice quality measurements.

Background
With the new Voice Quality feature in Nemo Handy, provided by Psytechnics PSM Mobile
module, it is possible to measure the voice quality of a live network as evaluated by customer
perception, based on the average listeners perception of speech quality. This is frequently
referred to by the term MOS (Mean Opinion Score).
Speech quality can be measured via two complementary means: subjective and objective tests.
In subjective testing of voice quality, a panel of users rate a given quality on a limited scale of 1-
5, after which a MOS is calculated by averaging the votes of all the subjects. To improve time
and cost efficiency, objective testing techniques have been developed through extensive work
to replace a large amount of subjective testing to provide an automated prediction of speech
quality. PSM Mobile by Psytechnics is an objective, non-intrusive (passive) testing technique,
and this model has made use of the Psytechnics database which contains over 220,000
subjective votes.

How PSM Voice Quality Works
PSM Mobile is a port of Psytechnics NiQA-DSP-LQ algorithm. At its core, NiQA-DSP-LQ has a
sophisticated identification system which has been designed to cover a wide variety of speech
distortion and degradation classes, and to predict their impact on the subjective quality of the
speech stream as perceived by human perception. PSM Mobile is a lighter and faster version of
ITU P.563, predicting a Listening Quality MOS in a similar way to P.563.
PSM Mobile is embedded in Nemo Handy Voice Quality, and it is activated whenever a signal is
received. Nemo Handy Voice Quality measures the MOS of the Listening Quality of a received
signal based on human perception.
The signal can be obtained by calling a test server (such as Nemo Server) or another Nemo
Handy 1.90 or 2.30 that automatically starts sending an audio sample (provided by Anite
Finland Ltd) to the caller. The first MOS score is delivered to the measuring phone after a 20
second delay from the outset of the phone call, and after that the samples will be delivered
every 6 seconds.



NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 17




www.anite.com/nemo [email protected]
Accuracy
As regards accuracy, NiQA-DSP-LQ has been tested over a wide range of network
architectures, conditions and languages in accordance with current ITU practice. The model has
a good correlation with subjective material with 20, 000 speech files.
It is worth noting here that although the passive testing of voice quality is highly reliable due to
its correlation to a host of subjective testings, the accuracy and confidence of single point MOS
measures are still improving as more calls are being analyzed and averaged over time.
Consequently, it is not advisable to make any decisions on network routing or configuration
based on a single call MOS.
3.2.2 VOICE CALLS
Nemo Handy offers support for voice call testing. Voice calls can be started manually from a
menu or by pressing a shortcut button. Scripts can be used to make multiple voice calls.


Voice call related measurement events stored in the Nemo Handy log file include call attempt,
call connect success, call disconnect, and call failed.

3.2.3 VIDEO CALLS
Nemo Handy offers full 3G video call support. Video calls can be started manually from a menu
or by pressing a shortcut button. Scripts can be used to make multiple video calls, just like
normal voice calls. Automatic video calls between two mobiles can be made by setting one of
the Handy mobiles to auto answer mode.

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 18




www.anite.com/nemo [email protected]

Video call related measurement events stored in the Nemo Handy log file include call attempt,
call connect success, call disconnect, and call failed.
3.2.4 HTTP/FTP CONNECTIONS
Nemo Handy offers support for testing HTTP/FTP downloads and uploads using scripts.
HTTP/FTP transfer related measurement events stored in the Nemo Handy log file include data
connection attempt, data connection success, data disconnect, and data connection failed.








3.2.5 SMS/MMS MESSAGES
Nemo Handy offers support for testing SMS/MMS sending. SMS/MMS messages can be sent
either manually or using scripts.












SMS/MMS related measurement events stored in the Nemo Handy log file include SMS/MMS
send attempts, SMS/MMS send succeeded/failed, and SMS/MMS success rate.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 19




www.anite.com/nemo [email protected]

3.2.6 HTML/WAP BROWSING
Nemo Handy offers support for testing HTML/WAP browsing using scripts. The browser window
is embedded in the Nemo Handy user interface. This enables real-time monitoring of browsing
performance while monitoring radio interface parameters.



HTML/WAP browsing related measurement events stored in the Nemo Handy log file include
HTML/WAP browsing attempt, HTML/WAP browsing success, and HTML/WAP browsing failed.
3.2.7 EMAIL
Nemo Handy offers support for testing email sending and receiving using scripts.
Email related measurement events stored in the Nemo Handy log file include SMTP/POP3
send/receive attempt, SMTP/POP3 send/receive success, and SMTP/POP3 send/receive failed.

3.2.8 PING
Nemo Handy offers support for scripted ICMP (Internet Control Message Protocol) ping testing.
Ping testing can be performed simultaneously with other PS data applications. Ping round-trip
time is measured in milliseconds and displayed as a graph. Ping related measurement events
stored in the Nemo Handy log file include ping attempts, ping failed/succeeded, and ping
success rate.

NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 20




www.anite.com/nemo [email protected]
3.3 INDOOR MEASUREMENTS
Nemo Handy provides indoor map support with an easy-to-use interface that includes zoom and
pan tools. Digital images can be imported to Nemo Handy and converted into map files (.tab).
The measurement route is drawn on the map with markers. When post- processing with Nemo
Outdoor or Nemo Analyze, the results can be displayed as a color-coded route.



NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 21




www.anite.com/nemo [email protected]
3.4 FORCING FEATURES IN NEMO HANDY
Nemo Handy supports the following forcing features:
Channel lock
Scrambling code lock
System lock
Cell barring

Note that the selection depends on the technology that the mobile is connected to. With
Channel Lock the Handy mobile can be locked on a GSM channel. With the Scrambling Code
Lock the mobile can be locked on a carrier and a scrambling code. With the System Lock
feature, the mobile can be locked on one of the systems: UMTS, GSM, GSM 900, GSM 1800,
and GSM 1900. In Cell Barring the options are accept, reverse, and ignore. The Status view will
display the status for each forcing feature.












NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 22




www.anite.com/nemo [email protected]
3.4 SCRIPTS
It is possible to use script files to run measurements with Nemo Handy. When a script is used,
Nemo Handy makes voice/video calls, data transfers etc. automatically. You can use scripts for
voice and video calls, HTTP/FTP packet data uploads/downloads, HTML/WAP browsing,
SMS/MMS messages, emails, and ping. Scripts can be created and edited with Nemo Handys
built-in script editor, or with PC software, Nemo Handy Script Editor.


When the Autologging option is activated, Nemo Handy will start logging automatically when a
script is started.



NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 23




www.anite.com/nemo [email protected]
3.5 NOTIFICATIONS
Nemo Handy offers a set of audio notifications that can be used to notify the user of important
measurement events. The notifications are fully configurable. They are created and edited in
textual format in the Nemo Handy Configuration Editor, stored in a configuration file (.xml), and
converted automatically into speech in Nemo Handy. Other notification features include
individual notification activation/deactivation through the Nemo Handy UI and a user-definable
hysteresis timer for controlling and silencing repeating notifications.



NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 24




www.anite.com/nemo [email protected]
4 POST-PROCESSING
Data from Nemo Handy can be exported manually using a memory card or automatically by
downloading files to an FTP server or sending them to an email address where they are easily
available for analysis. The data can be sent via GPRS/EDGE/WCDMA packet data.









Nemo Handy produces measurement files in a binary file format (.nbl). The files can be
converted to the standard Nemo File Format and imported to Nemo tools Nemo Outdoor and
Nemo Analyze, as well as to various third-party post-processing/analysis tools which support
the Nemo File Format. The conversion is made with the Nemo Handy File Manager an easy-
to-use Windowssoftware.









A detailed description of the Nemo file format is included on the product CD. The file format
description contains all recorded events and their parameters.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 25




www.anite.com/nemo [email protected]
5 NEMO PRODUCTS
In addition to the previously described product, Anite Ltd. has a range of tools and software that
can be used for measuring and analyzing wireless networks.

Nemo Outdoor A portable engineering tool for measuring and monitoring the
air interface of TETRA, TDMA, AMPS, cdmaOne, GSM, GPRS,
EDGE, WCDMA, CDMA2000, HSDPA, HSDPA 16QAM,
HSUPA, TD-SCDMA, and UMA wireless networks.
- with Indoor Option Nemo Outdoor is ideal for indoor measurements. Lightweight
Tablet PC makes it is easy to carry and allows the user to plot
the measurement route on a floorplan with a click of a pen.
- with Multi Option Nemo Outdoor Multi enables benchmarking measurements on
multiple networks and even on multiple technologies at the
same time. Possibility to establish up to four simultaneous
packet / circuit-switched data connections from test terminals.
Nemo Analyze A first-class post-processing tool for analyzing measurements.
Powerful built-in search facilities enable the easy locating of
specific events, trends, or problems.
Nemo Q Nemo Q is a Symbian -based extremely lightweight and
portable engineering tool for customer-assisted network
problem solving in the air interface of wireless networks. Nemo
Q supports measurements on GSM, GPRS, EDGE, and
WCDMA networks.
NEMO HANDY 2. 30 PRODUCT DESCRI PTI ON 26




www.anite.com/nemo [email protected]
6 CONTACT INFORMATION
Global
Email [email protected]
Tel. +358 50 395 7700
Fax +358 8 551 6182
Address Anite Finland Ltd, Sepnkatu 20, 90100 Oulu, Finland

North America
Email [email protected]
Tel. +1 214 566 4972
Fax +1 972 929 9898
Address Anite Telecoms Inc., 6225 N. State Hwy 161, Suite 425, Irving, TX 75038, USA

APAC
Email [email protected]
Tel. +65 6254 9003
Fax +65 6254 9885
Address Anite Singapore Pte Ltd, 101 Thomson Road, #20-05 United Square,
Singapore 307591

P.R. China
Email [email protected]
Tel. +86 10 6787 0268-232
Fax +86 10 6788 9681
Address Anite Wireless Trading (Beijing) Ltd., Room 2206, 22nd Floor, The Exchange
Beijing, No. Yi 118, J ianguo Road, Chaoyang District, Beijing 100022, China

For information on other local representatives near you, please check the updated contact
information list at www.anite.com/nemo.