Specifications

SOLO 100 - Telescopic Access Pole

Dimensions From 1.27m to 4.48m in 4 sections allowing access up to approx 6m
Weight 1.68kg
Material Fibreglass
SOLO 101 - Extension Pole
Length 1.13m
Weight 0.35kg
Material Fibreglass
Use Can be used independently OR up to 3 can be used to extend the
SOLO 100 for access up to approx. 9m
SOLO 200 - Detector Removal Tool
Weight 1.10kg
Detector sizes From 65mm dia to 110mm dia
Max working angle 30 degrees
SOLO 330 Smoke Dispenser
Weight 0.53kg
Detector sizes Up to approx. 100mm
(sensing chamber only needs to be sealed within the cup)
Colour Black / Red / Clear
Working angle 0, >90 max
Designed to be used with SOLO AEROSOL
SOLO Aerosol
Non Flammable
Ozone Friendly (ODP = O)
Not VOC (Volatile Organic Compound)
Operating temperature +10C to +35C
Storage temperature -10C to +50C
Colour Colourless, clear
Odour Faint pleasant smell
Size 130(h) x 66(dia)mm
SOLO 100 Telescopic Pole
SOLO 101 Extension Pole
SOLO 200 Removal Tool
SOLO 330 Smoke Dispenser
SOLO A3 Aerosol Smoke Aerosol
SOLO KITS
Solo kits offer an economic and convenient solution to purchasing a range of tools.
SOLO 810 Kit
A starter pack for testing smoke detectors fitted at normal ceiling height.
Contains: 1 SOLO 330 Aerosol Smoke Dispenser
1 SOLO 101 1.13m fibreglass Extension Pole
3 SOLO Aerosol
SOLO 811 Kit
A universal set for testing and removing smoke detectors fitted up to 6m high
Contains: 1 SOLO 100 Telescopic Pole
1 SOLO 200 Universal Detector Removal Tool
1 SOLO 330 Aerosol Smoke Dispenser
1 SOLO 600 Protective Carrying Bag
SOLO 812 Kit
A universal set for testing and removing smoke detectors fitted up to 8.2m high.
Contains: 1 SOLO 100 Telescopic Pole
2 SOLO 101 1.13m fibreglass Extension Pole
1 SOLO 200 Universal Detector Removal Tool
1 SOLO 330 Aerosol Smoke Dispenser
1 SOLO 600 Protective Carrying Bag
SOLO 814 Kit
A universal set for testing and removing smoke detectors and heat detectors fitted up to 6m high.
Contents as SOLO 811 but includes a SOLO 404 (220/240V) heat detector tester.
SOLO 822 Kit
A universal set for testing and removing smoke detectors and heat detectors fitted up to 6m high.
Contents as SOLO 811 but includes a SOLO 461 CATCordless Heat Detector Tester
NB. More kits are available please contact your local supplier for full details.
www.noclimb.com
www.noclimb.com
S MO K E D E T E C T O R T E S T E R S
efficient
universal
integrated
safe
lightweight
9m reach
endorsed
Ordering Information
NB. Details of products described in the publication
are subject to change without notice. E & OE.
The worlds genuine leader in
universal smoke and heat detector
test and service devices.
Manufactured by No Climb Products Ltd.
Alston Works, Alston Road, Barnet, Hertfordshire EN5 4EL. UK
Tel: +44 (0) 20 8449 3391 Fax: +44 (0) 20 8449 4029
Website: www.noclimb.com
Email: [email protected]
Other brochures available:
Trutest - Sensitivity Test Equipment
Heat Detector Testers
SM 01.001
Feedback from a range of customers detailing their ideal
smoke dispenser has resulted in the Solo 330.
Lightweight, strong and simple to use, it has been truly
designed for daily rigorous use.
The injection-moulded construction and swing frame of
the Solo 330 make it the ideal tool for testing virtually all
types and makes of modern smoke detectors at heights
up to 9m.
The Solo 330 has been ergonomically designed for
optimum use with the specially formulated Solo Aerosol.
Together they offer fully controlled and efficient testing.
Just a short burst of the aerosol is all that is needed to
activate smoke detectors.
The Solo 330, developed using the latest 3D modelling
techniques, has recently won a design award.
Why testing
is required . . .
Codes and standards throughout the world define the
testing and maintenance of fire detection systems
including smoke detectors. Detectors are tested, not
only in their own right, but are often the means through
which zones or circuits are checked.
These codes and standards now require functional tests to
introduce smoke or simulated smoke through the detector
vents and into the sensing chamber. Testing proves the
ability of a smoke detector to respond to smoke type
stimuli, communicate with the panel and initiate an alarm
as a result. Magnetic testing is no longer acceptable.
Testing by application of a recommended aerosol,
designed to safely simulate smoke particles, is now the
most widely used professional method approved by
detector manufacturers throughout the world.
The range of test tools
saves both time and money
To ensure professional testing of installed detectors, the majority of fire companies choose
SOLO equipment for their service and maintenance engineers.
No Climb is unique as a totally independent company, manufacturing
universal test tools for the fire protection service and maintenance
industry. The company works closely with major detector manufacturers
to develop endorsed, high quality test tools that are universal, lightweight,
easy to use and, above all, professional.
The SOLO range consists of integrated, durable tools, which
offer an unparalleled cost and time saving over alternative
techniques of functional testing of smoke detectors.
Detectors mounted up to 9m high can be tested, accessed,
removed and replaced with ease.
With the best tools available to do the job,
maintenance technicians can complete testing
safely and accurately, saving considerable time.
Features / benefits
of the 330
G Robust to withstand the rigours of everyday use
G Strength and durability of modern plastics optimised to ensure long life
G Injection-moulded plastic design - minimises weight
G Spring-loaded mechanism - enables effective, but economic, aerosol delivery
G Dispenser and patented diaphram contain particles conserves aerosol
G Aerosol spray not directed at detector
sensor not swamped with particles
G Touch sensitive ideal for testing detectors
fitted to suspended ceilings
G Universal - suits most detectors fitted from
normal ceiling height up to 9m
G Clear cup and diaphragm
allows view of the detector LED whilst testing
G Interchangeable with all other Solo tools
NB. Testing using an unmeasured source of smoke or other aerosol is not a test of detector sensitivity (see Trutest)
Investment in SOLO tools and equipment is
frequently repaid in a matter of days.
Like all brilliant designs,
its apparent simplicity belies its cleverness.
Detectors shall be tested in place to ensure smoke entry into the sensing
chamber and an alarm response...
Source: NFPA 72 1999 Table 7 - 2 . 2 (Test Methods) 13 . g .
Each smoke detector shall be tested for operation by introducing smoke or
simulated smoke to the detecting chamber
Source: CAN/ULC - S536-97 # 6 . 6 . 4 . 1 . 4
...each detector should be checked for correct operation...
Source: BS 5839: Part 1: 1988 29. 2. 7 (b)
The 330 SMOKE DISPENSER -
Designed for todays maintenance engineer
SOLO Aerosol - The most thoroughly
researched Smoke Test Aerosol.
Testing using aerosols dispensed from pressurised
canisters is now widely accepted as the most popular means
of achieving the test for function of a smoke detector.
As aerosol usage increases, so do the number of providers.
Users must be aware that to manufacture a product
which will activate a smoke detector is not difficult.
However, it is considerably more challenging to
manufacture a product which is suitable for all makes
and models of detector, whilst not harming the detector,
its components, the user or the environment.
Too many test aerosols in todays fire protection market
have not been fully researched and, as a result, can cause
problems such as stress-cracking in detectors, other damage
to components, harm to the environment in which the
detector is installed or even respiratory or other health
problems to the user. Some may even pose a fire risk!
The Solo Aerosol is the result of an extensive two year research programme to produce the best,
most efficient and safest smoke aerosol. The project, within the government Teaching Company
Scheme (TCS), brought together the test and service equipment skills of No Climb with the
chemistry and particulate behaviour skills of a major London university.
An aerosol development scientist, based at No Climb, undertook research into aerosol
products and detection devices, concentrating on:
G particle size, characteristic and behaviour G device response / clearing times
G residue G detector and component compatibility
G toxicity of product G spray pattern
Chemicals used in detector test equipment need to be compatible with the plastics from
which detectors are manufactured. This project included the most in-depth plastic /
chemical compatibility tests ever conducted in this field and proved Solo aerosol to be
chemically safe. It also uncovered worrying deficiencies in currently available alternatives.
Experts recommend the use of a smoke dispenser for the
release of aerosol (the design of the aerosol being optimised
for this function). Particle size and dissipation is the key to
efficient activation of detectors, whilst ensuring detectors are
not soiled by excessive aerosol application.
Selection of the correct chemicals for use within these
products is of paramount importance since there is a need to
combine the often conflicting requirements of performance,
environmental regulations, non-flammability, low cost and,
most importantly, compatibility with the components from
which the detectors are manufactured.
Solo Aerosol has been subjected to the most in-depth plastic compatibility and
performance research and testing in the history of this type of product
Solo Aerosol has been proven to contain the properties vital to todays fire
protection market
G No damage to detector plastics / components *
G Faster response times to alarm
G Faster clearing and detector re-set times
G Minimum residue
G Designed for use with Solo 330 Smoke Dispenser
G Non-flammable formulation
G Minimum impact to health, safety and environment
G Improved value for the customer
Long term testing, carried out on aerosols by No Climb, has optimised the
response rate for smoke detectors, as well the clearing time, reducing the time
required for testing.
* NB. Statement based on those detector plastics and components included within the development project and current at that time
Features / Benefits
G Product Information
I Chemical testing
I Field testing
The result is Aerosol -
The Definitive Smoke Testing Aerosol
100
The Solo 100 telescopic pole extends from 1.26m to 4.5m in 4 sections allowing access to detectors fitted up to 6m.
G Made from strengthened durable fibreglass
G Lightweight and portable
G Totalock system ensures telescopic sections lock
easily and never twist
G Suits all Solo tools only one access pole is required
for all jobs
G Tools simply slide into top of pole and are released by
pressing a button
G Drastically reduces time required
G Non conductive
G Ultimate quality a total solution
G Designed for quick and reliable use every time
Kits
101
Made of the same durable materials as the Solo 100, the
Solo 101 is ideal for reaching detectors mounted on ceilings
just above hand height, or for extending the Solo 100
above 6m (9m is the maximum recommended).
G Lightweight and portable
G 1.13m long or up to 3 can be used to extend the
Solo 100 telescopic pole
Solo equipment is available in a number of
conveniently arranged kits. Whether your need is for
a simple starter kit, a universal smoke testing kit or an
all-encompassing kit including a heat detector tester, there
is one available.
Kits are supplied with a purpose designed carry-bag, which holds
all the tools an engineer needs for testing - not just practical but
also giving a professional image when arriving on site.
Solo Access Poles
A key feature of the professional Solo range of quality products is its interchangeable tools. Each tool is developed
for a particular task, but each interchanges on either a 4.5m telescopic or a single 1.13m extension pole. The single
extension poles, in turn, can be fitted onto the telescopic pole for reaching heights as high as 9m.
Using ladders or mobile platforms to reach detectors is obviously inefficient. Using Solo access poles, detectors are
rapidly tested or removed, considerably increasing efficiency and safety with minimum inconvenience.
Both extremely strong and amazingly light, Solo access poles will provide years of reliable service. Simplicity itself to
use, these superior poles are the best investment you can make - try them and see the difference they make to the
efficiency of your service operation.
Trutest - Measurement of absolute
sensitivity of smoke detectors
Smoke detector sensitivity can and does drift. To help guarantee performance of smoke detectors and reduce the
number of false alarms from over sensitive detectors, sensitivity should be measured. Regular sensitivity testing is
obligatory under certain codes and standards.
Trutest is a fully portable device, enabling fire alarm technicians to measure the real sensitivity of smoke detectors
quickly and easily in one test.
Trutest is the worlds most technologically advanced field service test instrument
for smoke detectors. A full brochure and details are available from your
nearest distributor.
200
The Solo 200 is a universal detector removal tool suitable for use with the majority of detectors on
todays market.
Colour coded tri-grips twist into place to create
different size combinations. The combinations of
the tri-grips enable removal/replacement of
different size detectors, ensuring that one tool
is all you will need.
Solo 200 has a universal joint ensuring that the tool
remains parallel with the ceiling while in use, providing
easy extraction and replacement even on detectors that
cannot be accessed from directly underneath.
G Ideal for most makes and types
of detectors
G Allows removal/replacement
of detectors at angles
G Adjustable for different sizes
of detectors