Babs Parts List

Plywood:
1--3/8 x 6 x 12 ply: Iirewall
1--1/4 x 12 x 24 ply: ribs E & F, C2
1--3/16 x 6 x 12 ply: L.G. plates
1--1/8 x 12 x 36 ply: tank box, F1, F20, center section ribs(2), Rib 1(2),
center section L.E., ail servo mount.
4--1/8 x 12 x 48 lite ply: 8 center section ribs, F2, F6 thru F14, wheel pants, tank box end,
C1, Iin platIorm
11/16 x 12 x 48 ply: wheel pants, V3
1--1/32 x 12 x 48 ply: cowl skin
11/64 x 12 x 48 ply: Ilap
Balsa sheets:
21 x 2 x 12: wing tips
21/2 x 4 x 48: pants, rudder post, Iin rib 1
13/8 x 3 x 30: rudder top, V1, V2
41/4 x 3 x 48: tailcone, stab T.E., elevator tips, el trim tab, F5 upper, pants
43/16 x 3 x 36: F3, F4 upper & lower
151/8 x 3 x 48: 8 center ribs, wing jigs, outer wing ribs, stab ribs, Iin & rudder ribs,
F15-F20, stab tips, shear webs.
54--3/32 x 4 x 48 light (soIt) density: F14 , wing sheeting, Iuselage sheeting,
stab sheeting, tailcone, rear sheer webs, Ilap core, lower wing Iilets
51/16 x 4 x 36: aileron skins, rudder base, Iin sheeting, upper wing Iilets
11/32 x 3 x 36: aileron dummy L.E, aileron dummy ribs
Balsa Blocks:
23 x 4 x 12 blocks: cowl nosebowl
23/4 x 3 x 24 block : tailcone, wing saddle supports
Sticks:
1--3/8 dowel: wing rods
1--1/4 dowel: wing alignment pins
33/32 x / x 36 hardwood: canopy stringers
1--1/2 x / x 12 hardwood: antenna mast, stab support
1--1/2 sq. x 36 hardwood: L.G. mounts, tank box, wing bolt support
13/4 x 30 triangular stock: landing gear support
2--3/16 sq x 36. hardwood: cowl stringers
4--1/4 x x 36 hardwood: center main spars
1--1/16 x 3/16 x 36 hardwood: elevator & rudder T.E.
21/2 x 3/8 x 36 hardwood: center Iorward spar
21/2 sq x 36: Iin, rudder
31/2 x 1 x 48: Wing L.E., stab T.E.
11/2 sq x 48: stab L.E.
221/4 sq. x 48: rear wing spars, crutch, Iuselage stringers
51/4 x / x 48: outer wing panel main spars
7 1/4 x 1/8 x 48: outer wing panel rear spars, Iin spar, elev trim tab spar
21/4 x x 36: stab spar
11/16 x / x 36: elevator cross ribs
11/8 x 1 x 12 hardwood: scale antenna mast core
Hardware
11 dia x 30 aluminum wing tube & socket. http://www.ziroliplans.com
1 pair Shindin 'Babs oleo struts, http://www.shindinmachine.com/
1 pair AeroIlex 8 x 1 / wheelchair wheels,
http://www.wheelchairparts.net/CATALOGi6458114.html?catId316997
1Dave Brown Vortech 6 P-51 spinner w/ lightened backplate,
https://www.dbproducts.com
11Klett or DU-BRO hinges: Ilap
22Robart Hingepoints: ailerons(10), rudder(4), stab(8)
15/32 music wire: tailwheel strut, elevator control horn
15/32 DU-BRO nosegear control horn: Ior elevator control horn
1--5/32 DU-BRO nosegear block & steering Arm: Ior tailwheel strut
41/4 x 20 nylon bolts: stab(2) and wing(2)
48-32 x socket-head cap screws & blind nuts: cowl
44-40 x socket-head cap screws & blind nuts: wheel bolts
48 x 32 x 1 socket head cap screws: wing bolts
244x3/4 FH wood screws: landing gear bearers
84x3/4 RH wood screws: landing gear mounts
1/16 sheet sheet aluminum: tailwheel, aileron horns.
1 pkg SIG Koverall: Iabric covering Ior aileron, elevator, rudder
11/4 scale Japanese Pilot, http://www.acesoIiron.com/page/AOIW2IJN14.htm
11/4 scale 9-cylinder dummy radial engine,
http://www.sigmIg.com/IndexText/WBR30850.html
13/16 x .014 x 12 brass tube: Spangenberg aileron control
17/32 x .014 x 12 brass tube: Spangenberg aileron control
22-56 x 3/8 nuts and bolts: Spangenberg aileron control
2--.015 x 17 x 17 SIG clear plastic: canopy and windows
11 -2 soIt tailwheel
13/8 masking tape: canopy Irames
11/8 3M Fineline masking tape: canopy Irames
3 rollsChartPak 1/64 graphic tape, BGCP0201: panel lines
1 pkgRadio Shack Red 12 VDC Lamp Assembly, , P/N 272-0332: signal lamps
Vacuum-Iormed windscreen & signal light Iairings, Iiberglass wheel pants & cowl
available Irom JeII Micko. See www.MNBigBirds .com or email jmikhlaol.com.
Markings:
C:\Corel\Andersen Kamikazee,cdr: ProMark dry transIer markings.
http://www.pro-mark.com/