PRIMERGY Econel 200 S2
System configurator and order-information guide
Contents
Instructions
Configuration diagram
Configurator
0 System software
I Basic unit
II Processor
III Memory
IV Graphics
V Accessible drives
VI SCSI Controller
VII Disk array, Hard disk drives
VIII Communication/Network
IX Miscellaneous
X Country specific power cords
Change report
PRIMERGY Server
August 2008
System configurator and order-information guide
PRIMERGY Econel 200 S2 Status 2008-07-28
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/System-Architect
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section
III
Memory, example
There are X memory slots which can be equipped with XXX MB
It is permissible to make up to X passes through the memory upgrade options
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x
Please note that there are information symbols which indicate necessary information.
Further information in the internet see:
http://www.primergy.com (internet)
http://extranet.fujitsu-siemens.com/primergy (extranet)
Prices and availability see price list and PC-/System-Architect.
Subject to change and errors excepted.
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server 2 of 14
System configurator and order-information guide
PRIMERGY Econel 200 S2 Status 2008-07-28
Configuration diagram for PRIMERGY Econel 200 S2 System Unit
SIDE VIEW FRONT VIEW FRONT VIEW
System unit ( I )
XEON Processor Standard
Power supply
XEON Processor
5.25"x1.6"
Processor ( II ) Memory ( III )
Extension slots 5.25"x1.6"
SCSI Controller ( VI )
Disk Array ( VII )
Communication/Network ( VIII ) 5.25"x0.5"
5.25"x1.6" OR +
FDD
PCI-Express x16 (wired x8)
Accessible drives (V)
PCI-Express x8 (wired x4)
Hard disks ( VII )
PCI long (5V) 32-Bit / 33MHz
SATA - 3.5"x1"
PCI-X 100 long (3,3V, 133MHz IOOP)
SATA - 3.5"x1"
PCI-X 100 long (3,3V, 133MHz IOOP)
SATA - 3.5"x1"
PCI-X 100 long (3,3V, 133MHz IOOP)
SATA - 3.5"x1"
Slot 1/2/3: 133MHz IOOP if only one Slot is occupied
Key:
Included in basic unit
Option
3
4
1
2
dep. on base unit Slot 2 may be occupied
6
.
5
.
Bank 2
S
l
o
t
1
S
l
o
t
3
S
l
o
t
4
S
l
o
t
2
4
.
3
.
1
.
Bank 1
2
.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 3 of 14
System configurator and order-information guide
Start PRIMERGY Econel 200 S2 PRIMERGY Econel 200 S2 Status 2008-07-28
SW Configurator
with OEM-Software without OEM-Software
for PRIMERGY Server for PRIMERGY Server
Later use of OEM operating
VMware-Software system software is not allowed,
- GSX Server and GSX Virtual Infrastructure Node apart from few VMware
add-ons
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: W **) PRIMECLUSTER *)
- Small Business Server 2003 - Clustering
- Windows Server 2003, - Load Balancing
Web Edition (only English)
Standard Edition
Enterprise Edition Linux - Software: L **)
- Additional loose - SuSE Linux Enterprise Server
Client-Access-Licenses (CALs) - SuSE Professional Linux
(not for Web Edition) - Red Hat Enterprise Linux
Details eg. version numbers are published
Backup-Software / in the separate SW-Configurator
Application-Software: U
- ARCserve
- openSM2 *) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under
http://extranet.fujitsu-siemens.com/primecluster
**) Pay attention to the release and ordering information in PRINCE -> Operating System
http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users: http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm
for partners: http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm
Continue with PRIMERGY
HW configurator
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 4 of 14
System configurator and order-information guide
Start PRIMERGY Econel 200 S2 PRIMERGY Econel 200 S2 Status 2008-07-28
Section
I
Basic unit
System unit consisting of:
* Housing including standard power supply
Systemboard with:
* 6 PCI slots:
1x PCI 32Bit / 33MHz long (5V)
1x PCI-Express x8
1x PCI-Express x4 (mechanical x8)
3x PCI-X 64Bit / 100MHz long (3,3V)
(133MHz IOOP if only 1 Slot is occupied)
* 4 memory slots for up to 8GB PC2-4300 registered DDR2 RAM (ECC), max. 2GB modul per slot
* 1 bay 3,5" (for floppy disk 3.5"/ 1.44MB option)
* 3 bays 5.25" for accessible drives
* 4 bays 3.5" (for non hot plug SATA HDD / 1" high)
* on board SATA controller (6 port)
* Graphics controller ATI ES1000 with 32MB RAM on-board
* LAN 10/100/1000 Mb/s (Intel GilGal) on-board
* 1 x Fast-IDE (ATA) Controller on-board
* 6x USB 2.0 ( UHCI ) with 480MBit/s (2x external at the rear, 2x external at the frontside,
2x released internal USB Interfaces for backup devices, no USB wakeup)
Cables:
1. IDE cable for CD/DVD
2. 4 x SATA cabel in basic unit
* PS/2 mouse
* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
External Interfaces:
1x RS-232-C (serial, 9 pins)
1x keyboard (PS/2)
1x mouse (PS/2)
1x VGA (15 pins)
4x USB 2.0 (2x on frontside )
1x LAN RJ45
Cables included in basic unit
Connections Cable PRIMERGY Econel200
1.
IDE CD/DVD
Key:
IDE
2.
4 x
SATA hard disks
SATA
A
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 5 of 14
System configurator and order-information guide
A PRIMERGY Econel 200 S2 Status 2008-07-28
SATA Basic Units
S26361-K996-V102 S26361-K996-V103
XEON DP 5110 (1.6GHz) XEON DP 5110 (1.6GHz)
1066MHz FSB, 4MB SLC 1066MHz FSB, 4MB SLC
1x 160GB SATA HDD 1x 250GB SATA HDD
S26361-K996-V135 S26361-K996-V136
XEON LV DP L5310 (1.6GHz) XEON LV DP L5310 (1.6GHz)
1066MHz FSB, 2x4MB SLC 1066MHz FSB, 2x4MB SLC
1x 160GB SATA HDD 1x 250GB SATA HDD
S26361-K996-V112 S26361-K996-V113 S26361-K996-V114
XEON DP E5310 (1.6GHz) XEON DP E5310 (1.6GHz) XEON DP E5310 (1.6GHz)
1066MHz FSB, 2x4MB SLC 1066MHz FSB, 2x4MB SLC 1066MHz FSB, 2x4MB SLC
1x 160GB SATA HDD 1x 250GB SATA HDD 1x 500GB SATA HDD
S26361-K996-V132 S26361-K996-V133 S26361-K996-V134
XEON DP E5335 (2.0GHz) XEON DP E5335 (2.0GHz) XEON DP E5335 (2.0GHz)
1333MHz FSB, 2x4MB SLC 1333MHz FSB, 2x4MB SLC 1333MHz FSB, 2x4MB SLC
1x 160GB SATA HDD 1x 250GB SATA HDD 1x 500GB SATA HDD
B
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 6 of 14
System configurator and order-information guide
B PRIMERGY Econel 200 S2 Status 2008-07-28
Section
II
Processor
Later upgrading to a dual-processor system is also possible.
For a CPU extension the second CPU must be of identical type and clock rate.
2. Processor Dual Core
S26361-F3243-E160 S26361-F3259-E161
XEON 1.6GHz / 1066MHz FSB XEON 1.6GHz / 1066MHz FSB
with 4MB SLC on Chip, with 2x4MB SLC on Chip,
(SLC=Second Level L2 Cache) Low Voltage Quad Core CPU (50W)
heatsink and CPU Fan (SLC=Second Level L2 Cache)
heatsink and CPU Fan
occupies slot for one CPU occupies slot for one CPU
max. 1x per system max. 1x per system
2. Processor Quad Core
S26361-F3259-E160 S26361-F3259-E200
XEON 1.6GHz / 1066MHz FSB XEON 2.0GHz / 1333MHz FSB
with 2x4MB SLC on Chip, with 2x4MB SLC on Chip,
(SLC=Second Level L2 Cache) (SLC=Second Level L2 Cache)
heatsink and CPU Fan heatsink and CPU Fan
occupies slot for one CPU occupies slot for one CPU
max. 1x per system max. 1x per system
Section
III
Memory
- There are 4 memory slots for max. 8GB RAM ( Fully Buffered DIMM = FBD533 / PC2-4200F )
or ( Fully Buffered DIMM = FBD667 / PC2-5300F ) available
- Each slot can optionally be equipped with 512MB, 1GB or 2GB FBDIMM modules
- each basic unit has to be equipped with memory,
which has to be ordered with the ordercode of a "Base Memory"
(either 1x512MB, 2x512MB = 1GB, 2x1GB = 2GB or 2x2GB = 4GB)
Note**: The price of the smallest Base Memory is already included in the basic unit,
The price of the other Base Memories is the Delta to the smallest Base Memory
So additional memory extensions (Upgrade Memory ) can still be configured
for the standard market price.
Base Units with 512MB single DIMM can only be upgraded using L-Number upgrade kits.
No mix of modules within one memory bank allowed.
ECC with memory scrubbing and Chipkill is standard for PRIMERGY Econel 200 S2
See Note** above
S26361-F3230-B811 S26361-F3230-B821 S26361-F3230-B822 S26361-F3230-B823
Base Memory 512MB Base Memory 1GB Base Memory 2GB Base Memory 4GB
FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F
consisting of consisting of consisting of consisting of
1x 1 single rank modules 2 single rank modules 2 dual rank modules 2 dual rank modules
occupies one branch occupies one branch occupies one branch occupies one branch
max. 1x per system max. 1x per system max. 1x per system max. 1x per system
C
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 7 of 14
C
S26361-F3230-E521 S26361-F3230-E522 S26361-F3230-E523
Upgrade memory 1GB Upgrade memory 2GB Upgrade memory 4GB
FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F
with SDDC=chipkill support with SDDC=chipkill support with SDDC=chipkill support
1x consisting of consisting of consisting of
2 single rank modules 2 dual rank modules 2 dual rank modules
occupies one branch occupies one branch occupies one branch
max. 1x per system max. 1x per system max. 1x per system
Possible Memory Configuration
Bank 1 Slot 1 512MB 512MB 512MB 512MB 512MB 1GB 1GB 2GB 2GB
Slot 2 512MB 512MB 512MB 512MB 1GB 1GB 2GB 2GB
Bank2 Slot 3 512MB 512MB 1GB 2GB
Slot 4 512MB 512MB 1GB 2GB
Legend: bolt = in base unit
standard = upgrade using E- or L-Number
italic = upgrade using L-Number only
Section
IV
Graphics
Graphic controller on mainboard (ATI ES1000, 32MB)
D
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 8 of 14
System configurator and order-information guide
D PRIMERGY Econel 200 S2 Status 2008-07-28
Section
V
Accessible drives
There are 3 drive bays (3x 5,25"/1x 3,5") for accessible drives
S26361-F2826-E202
FDD incl. mounting kit
3,5" FDD Drive
with mounting kit for SL DVD
1.6 x 5.25", anthracite bezel
max. 1x per system
S26361-F3123-E1 S26361-F3236-E1
CD-RW / DVD drive 0.5" DVD-RW 8x super multi drive
24/24/24x / 8x ATAPI all formats, DUAL/DL, DVD-RAM
SNP:SY-F2234E1-A S26361-F3148-E1 CD-RW only with W2K, W3K, Linux only W2K, W3K and Linux
DVD-ROM 16/48x ATAPI DVD-RW 16x super multi drive 0.5 x 5.25", anthracite bezel 0.5 x 5.25", anthracite bezel
all formats, DUAL/DL, DVD-RAM max. 1x per system max. 1x per system
incl. description (Ger/US) only W2K, W3K and Linux
1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel
max. 1x per system max. 1x per system
S26361-F2849-E3 S26361-F3224-E3 S26361-F3460-E3
Tape drive VXA-2 Tape drive VXA-320 Tape drive Entry LTO Ultrium
80GB, 6MB/s, U2W SCSI 160GB, 12MB/s, U160 SCSI 100GB, 16MB/s, U160 SCSI
Connector: HD68 Connector: HD68 Connector: HD68
without cable without cable without cable
incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US)
data and cleaning cartridge data and cleaning cartridge data and cleaning cartridge
1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
max. 1x per system max. 1x per system max. 1x per system
as soon as available
S26361-F2848-E3 S26361-F3225-E3 SCSI Backup Drives
Tape drive DDS Gen5 Tape drive DDS Gen6 require a SCSI Controller
S26361-F2848-E31 (only for OBDR) 80GB, 6MB/s, U160 SCSI S26361-F2399-E2 or
DDS-G5 for One buttom dis. recov. Connector: HD68 S26361-F2644-E3
36GB, 3MB/s, U2W SCSI without cable
1x Connector: HD68 incl. description (Ger/US)
without cable data and cleaning cartridge
incl. description (Ger/US) 1.6 * 5.25", anthracite bezel
data and cleaning cartridge max. 1x per system
1.6 * 5.25", anthracite bezel
max. 1x per system
S26361-F3324-E3 S26361-F3857-E1
Tape drive DDS Gen5 USB 5.25" RDX drive USB 5.25" internal RDX cartridges must be ordered separately
36GB, 3MB/s, USB 2.0 80-160GB, 25MB/s, USB 2.0 RDX 80GB = S26361-F3857-L80
Connector: USB "B" Connector: USB "B" RDX 120GB = S26361-F3857-L120
with USB cable kit with USB cable RDX 160GB = S26361-F3857-L160 (later)
incl. description (Ger/US) incl. description (Ger/US)
data and cleaning cartridge without RDX cartridges
1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
max. 1x per system max. 1x per system
If installation is done locally, make sure you have internal
or external FDD available for driver installation.
Following USB Components are available
1) USB DVD+-RW: Super Multi DVD slim drive (USB cable incl.) S26391-F7119-L100
2) FDD USB: external USB FDD (USB cable included) S26391-F264-L226
3) USB Keyboard: KBPC PX D, professional keyboard S26381-K340-V120
4) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 S26381-K415-L100
5) USB Memorybird: 2GB S26391-F6047-L102
E
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 9 of 14
System configurator and order-information guide
E PRIMERGY Econel 200 S2 Status 2008-07-28
Section
VI
SCSI-Controller
SCSI Controller for internal backup drives
S26361-F2644-E3 S26361-F2399-E2
SCSI Adapter U160 SCSI Adapter U160
LSI based (53C1000R) Adaptec 29160
1 channel LVD, 1 channel: LVD + Fast/ Ultra (decoupl.)
for internal backup drive max. 160MB/s; without cable
max. 160MB/s; with cable PCI 64/66, min 180 mm
PCI 64/66, min 166mm, PCI standard profile
PCI standard profile int: 50-pin or HD68-pin
int: HD68-pin LVD ext: HD68-pin
max. 1x per system max. 1x per system
S26361-F2814-E6
68-Pin Kit for accessible drives
Cable with Terminator
To connect acc. drives to
separate SCSI controller
max. 1x per system
F
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 10 of 14
System configurator and order-information guide
F PRIMERGY Econel 200 S2 Status 2008-07-28
Section
VII
Disk Array, Hard Disk Drives
SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1 and 5 (when controller/
firmware is available)
SATA software RAID for Disk Array
S26361-F3217-E100
SATA Software RAID5 LSI
LSI MegaSR
enabling key
RAID 0, 1, 10 & 5
no Cache, no BBU
SATA 3Gb/sec
internal SATA port only
uses SATA ports of Southbridge
max. 1x per system
One hard disk drive
is in the basic unit
included
for on-board SATA RAID Controller
S26361-F3219-E80 S26361-F3219-E160 S26361-F3219-E250 S26361-F3219-E500
HD 80GB 7.2krpm 3.5" HD 160GB 7.2krpm 3.5" HD 250GB 7.2krpm 3.5" HD 500GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache
3x SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s SATA 3Gb/s
non hot plug non hot plug non hot plug non hot plug
occupies 1" bay occupies 1" bay occupies 1" bay occupies 1" bay
max. 3x per system max. 3x per system max. 3x per system max. 3x per system
G
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 11 of 14
System configurator and order-information guide
G PRIMERGY Econel 200 S2 Status 2008-07-28
Section
VIII
Communication / Network
S26361-F3053-E1 S26361-F3142-E2 respin
Gigabit Ethernet Controller 1000TX (Stebbins2 LF respin)
Eth Ctrl 1x1Gbit PCI-X Pro/1000MT Cu Gigabit Ethernet Controller 1000TX
2x Intel PRO/1000 MT Server Adapter Eth Ctrl 1x1Gbit PCI32 PRO/1000GT Cu
PCI-X (PCI64/133) Intel Pro/1000 GT Desktop Adapter
ext: for RJ45-connector, Cat 5 PCI 32 (33/66MHz),
max. 2x per system ext: for RJ45-connector, Cat 5
max. 2x per system
H
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 12 of 14
System configurator and order-information guide
H PRIMERGY Econel 200 S2 Status 2008-07-28
Section
IX
Miscellaneous
Section
X
Country specific power cords
Power cord for floorstand versions for following countries:
1,8 m, grey
T26139-Y1740-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
T26139-Y1742-E10 USA, Canada
T26139-Y1743-E10 Switzerland
T26139-Y1744-E10 UK, IR
T26139-Y1745-E10 Italy
T26139-Y1746-E10 Denmark
T26139-Y3850-E10 Option "no powercord"
keyboards for floorstand versions for following countries: USB Keyboard: S26381-K340-E120
S26381-K397-E110 USA / international KBPC PX D, professional keyboard
S26381-K397-E120 Germany
S26381-K397-E140 France
S26381-K397-E155 Sweden / Finland
S26381-K397-E165 United Kingdom
S26381-K397-E180 Spain
S26381-K397-E185 Italy
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist.
These options are supplied lose with the shipment.
For suitable peripherals for this product, please refer to SystemArcitect.
End PRIMERGY Econel 200 S2
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 13 of 14
System configurator and order-information guide
PRIMERGY Econel 200 S2 Status 2008-07-28
Change Report
Date Order number Changes
2008-03-17 S26361-K996-V136 PY Eco200 S2/LV DP 5310 - as soon as available
2008-03-17 S26361-K996-V135 PY Eco200 S2/LV DP 5310 - as soon as available
2008-03-17 S26361-K996-V14* PY Eco200 S2/DP 5050 - no longer available
2007-09-19 S26361-F3225-E3 Tape Kit DDS Gen6 80GB 6MB/s int. - as soon as available
2007-09-17 S26361-K996-V13* PY Eco200 S2/DP 5335/**0GB SATA HDD - as soon as available
2007-09-17 S26361-K996-V11* PY Eco200 S2/DP 5310/**0GB SATA HDD - as soon as available
2007-07-25 S26361-F3142-E1 Gigabit Ethernet Contr. 1000TX - no longer available
2007-06-29 S26361-F3313-E5xx Base Memory FBD533 / PC2-4200F - no longer available
2007-06-29 S26361-F3313-B8xx Base Memory FBD533 / PC2-4200F - no longer available
2007-06-29 S26361-F3857-E1/L* RDX drive USB 5.25" internal and cartridges - as soon as available
2007-05-22 S26361-K996-V101 PY Eco200 S2/DP 5110/80GB SATA HDD - no longer available
2007-05-22 S26361-K996-V141 PY Eco200 S2/DP 5050/80GB SATA HDD - no longer available
2007-04-26 S26361-F3142-E2 Gigabit Ethernet Controller 1000TX - now available
2007-04-18 S26361-F3217-E100 SATA Software RAID5 LSI - now available
2007-03-05 S26361-F3230-E5xx Base Memory FBD667 / PC2-5300F - now available
2007-03-05 S26361-F3230-B8xx Upgrade memory FBD667 / PC2-5300F - now available
2007-02-08 S26361-F3460-E3 Tape drive Entry LTO Ultrium - now available
2006-11-21 first draft
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 14 of 14
