AMC GmbH Chemnitz * Tel.: 0371/38388-0 * Mail: [email protected] * Web: www.amc-systeme.
de
20-35
19
PC-based Controllers
Embedded Controllers
20
PAC
21
Motion Control
22
RS-485 I/O
23
Ethernet I/O
24
Building Automation
25
Self-service Terminals
26
eHome Platforms
27
Features
RoHS
COMPLIANT
2002/95/EC
ADAM-5510/TCP
ADAM-5510E/TCP
10/100Base-T Ethernet interface
Supports Web Server function
Supports Email Alarm function
Supports FTP Server and Client functions
Supports Modbus/TCP Server and Client function libraries
Supports Modbus/RTU Master and Slave function libraries
1.5 MB Flash ROM (960 KB for user applications)
640 KB SRAM (384 KB for battery backup)
ROM-DOS operating system
Watchdog timer and real-time clock
4 serial communication ports
4 or 8 I/O slot expansion
Specications
Control System
CPU 16-bit processor
I/O Slots ADAM-5510/TCP: 4
ADAM-5510E/TCP: 8
LED Indicators Power, CPU, communications, and battery
Memory Flash disk: 1 MB (960 KB for user applications)
Flash memory: 256 KB
Flash ROM: 256 KB
RAM: 640 KB SRAM (384 KB for battery backup RAM)
Operating System ROM-DOS
Real-time Clock Yes
Watchdog Timer Yes
Communications (Ethernet)
LAN 10/100Base-T
Transmission Distance 100 m
Communications (Serial)
Max. Nodes 256 (in RS-485 daisy-chain network)
Transmission Distance 1.2 km (4000 feet)
Transmission Speed 1200 bps ~ 115.2 kbps
Protection
Communication Line 2,500 VDC
(COM2 only)
Isolation
Communication Power 3,000 VDC
Isolation
I/O Module Isolation 3,000 VDC
Software
C Library Borland C++ 3.0 for DOS
Power
Power Consumption 4 W @ 24 Vdc (not including I/O modules)
Unregulated 10 ~ 30 V
Power Input Unregulated 10 ~ 30 VDC
General
Certications CE, FCC class A
Connectors ADAM-5510/TCP: 1 x DB9-M for RS-232 (COM1)
ADAM-5510E/TCP: 1 x DB9-M for RS-232/485
(COM1)
1 x Screw terminal for RS-485 (COM2)
1 x DB9-F for RS-232/Programming (COM3)
1 x DB9-M for RS-232/485 (COM4)
1 x Screw-terminal for power input
1 x RJ-45 for LAN
Dimensions 4-slot: 231 x 110 x 75 mm
8-slot: 355 x 110 x 75 mm
Enclosure ABS+PC
Mounting DIN-rail, stack, wall
Environment
Humidity 5 ~ 95%, no-condensing
Operating Temperature -10 ~ 70 C (14 ~ 158 F)
Storing Temperature -25 ~ 85 C (-13 ~ 185 F)
Ordering Information
ADAM-5510/TCP 4-slot PC-based Controller with Ethernet
ADAM-5510E/TCP 8-slot PC-based Controller with Ethernet
4-slot PC-based Controller with
Ethernet
8-slot PC-based Controller with
Ethernet
Introduction
In the ADAM-5510 series of PC-based programmable controllers, Advantech has introduced Ethernet-enabled features. The new 4-slot ADAM-5510/TCP and 8-slot ADAM-5510E/
TCP support HTTP server, FTP server, and e-mail alarm functions. These functions can be used to monitor a system via the Internet, acquire data through an FTP connection and send
alarms to designated e-mail addresses if a critical situation emerges. Both products also support Modbus/TCP server/client functions. The ADAM-5510/TCP and ADAM-5510E/TCP
can work as a Modbus/TCP client to retrieve data from remote I/Os, and Modbus/TCP server to connect with the HMI/SCADA software.
20-36
AMC GmbH Chemnitz * Tel.: 0371/38388-0 * Mail: [email protected] * Web: www.amc-systeme.de
Feature Details
Supports Powerful Ethernet Features
ADAM-5510/TCP and ADAM-5510E/TCP are Ethernet-enabled Programmable
Controllers. The new 4-slot ADAM-5510/TCP and 8-slot ADAM-5510E/TCP support HTTP
server, FTP server, and e-mail alarm functions. These functions can be used to monitor
a system via the Internet, acquire data through an FTP connection and send alarms to
designated e-mail addresses if a critical situation emerges.
Enable Ethernet Connectivity with Other Devices
ADAM-5510/TCP and ADAM-5510E/TCP support both Modbus/TCP Server
function library and Modbus/TCP Client function library. The ADAM-5510/TCP and
ADAM-5510E/TCP can work as a Modbus/TCP client to retrieve data from remote I/O
modules, and Modbus/TCP server to connect with the HMI/SCADA software.
More Data Memory & I/O Slots to Support Versatile Applica tions
The ADAM-5510/TCP and ADAM-5510E/TCP offer more than enough spare memory for
developing complex logic or data storage applications, such as data recording, which is
difcult for traditional controllers. The ADAM-5510/TCP and ADAM-5510E/TCP feature
1.5 MB ash memory and 640 KB SRAM (up to 384 KB battery backup memory). ADAM-
5510/TCP and ADAM-5510E/TCP also support up to 4 or 8 I/O slots for I/O modules,
which can provide more exibility and I/O points for users applications.
ADAM-5510/TCP
ADAM-5510E/TCP
Complete I/O Module and C Library Support
The ADAM-5510/TCP and ADAM-5510E/TCP support industrial I/O modules including
digital I/O, analog I/O, counter and special purpose I/O modules such as Thermocouple
and RTD. It also offers well-stocked Borland C libraries, including system resources
function, I/O functions, communication functions, socket functions, Modbus/TCP
functions, Modbus/RTU functions and the functions of Ethernet features. All the functions
have sample programs which can save development time and efforts.
Supports Four Communication Ports
The ADAM-5510/TCP and ADAM-5510E/TCP has four independent communication ports.
That means they can simultaneously communicate with one RS-232/485 device (COM1),
one RS-485 device (COM2), one RS-232 3-wire device (COM3), and one RS-232/485
device (COM4). They also support Modbus/RTU master function library for connecting
Modbus remote I/O modules and Modbus/RTU slave function library for connecting to
HMI/SCADA software.
Multiple RS-232 Port Support
The ADAM-5090 is a 4-port RS-232 module that is equipped with 4 RS-232 ports,
which make it especially suitable for bi-direction communication. It can simultaneously
read/write data from other third-party devices such as barcode readers or PLCs, as long
as they have an RS-232 interface. Furthermore, commands can be issued through the
ADAM-5090 to control other devices. It is fully integrated with the ADAM-5510/TCP
and ADAM-5510E/TCP, and transmits data through RS-232 ports. The whole integrated
system supports Modbus/RTU master function, which can connect and issue commands
to control Modbus remote I/O devices by Modbus/RTU protocol.
Wallmounting
Hole
Diagnostic
LEDs
Inserted
I/O Module
Snap Lock
Node ID Switch Plug-in Screw
Terminal Block
Ethernet Port Power Terminal
