TOSHIBA INTERNATIONAL CORPORATION PTY LTD

TOTALLY ENCLOSED FAN COOLED

PREMIUM EFFICIENCY
HEAVY DUTY ELECTRIC MOTORS
0.37kW to 355kW 200volt to 1100volt
S O L U T I O N S S E R V I C E S U P P O R T
With Ex e, Ex n & DIP Options
2 | TOSHIBA INTERNATIONAL CORPORATION
STANDARD PREMIUM EFFICIENCY* MOTOR FEATURES INCLUDE
HEAVY DUTY CONSTRUCTION
1
Fram es are high grade cast iron,
- M achined to close tolerance to ensure accurate alignm ent
and t in accordance w ith our high standards.
- Exceptional corrosion resistance & high structural rigidity
are inherent in Toshiba m otor construction.
Steel fan covers are standard w ith cast iron option.
Sintered bronze drain plugs are tted as standard for fram es
D 160 and above. Available as an option on sm aller fram es.
STANDARDS
Toshiba Prem ium Ef ciency M otors com ply w ith A S1359 and
M EPS 2006 requirem ents.
Special m otors to other Standards are also available eg
N EM A ,C EN ELEC or other national standards.
PREMIUM EFFICIENCY LAMINATIONS
2

Prem ium -grade silicon steel and longer cores low er
operating ux densities and losses achieving optim um
ef ciency.
LOW LOSS STATOR WINDINGS
3
T oshibas use of greater cross sectional area of copper
low ers w inding resistance and reduces losses giving
im proved ef ciency.
A ll w indings are insulated w ith non-hygroscopic m aterials,
ensuring reliable m otor operation in hum id,corrosive and
abrasive industrial environm ents.
INSULATION & THERMAL ADVANTAGE
Toshiba m otors are insulated w ith class Fm aterials and
feature excellent therm al reserve,offering low tem perature
rise characteristics generally below class E.
These characteristics allow optim al exibility in regard
to variable frequency drives,higher altitude and higher
am bient applications,and are also forgiving to interm ittent
current overloads.
FLEXIBLE TERMINAL BOX DESIGN
C ast iron term inal boxes are diagonally split,and have
anges and neoprene gaskets.Larger fram es have oversized
fabricated steel boxes.
A ll term inal boxes are tted w ith rem ovable gland plates,
drilled and tapped to dim ensions speci ed on pages 10-13.
Blank or custom ised gland plates are available as an option.
Term inal boxes m ay be rotated 90 by four positions for
conduit entry on fram es sm aller than D 315.
Term inal boxes are m ounted right hand side,view ed from
drive end,and can be m ounted on the opposite side if
required on fram es up to D 225.O n fram es D 250 and above,
for non-standard term inal box positions contact Toshiba
of ce at tim e of order.
LOW NOISE LEVELS
4

Special attention to the fan and cow l design achieves quiet
operation w ith ef cient cooling.Toshiba can supply m otors
w ith special low noise level fans and/or acoustic covers.
Fans are cast iron or fabricated steel depending on fram e size.
HIGH TORQUE ROTOR
5

Pressure cast alum inium rotors w ith integrally cast bars,end
rings and cooling fans,provide reliable operation.
Specially designed rotors give Toshiba m otors advantageous
torque characteristics and m inim ise losses.
LONG LIFE BEARINGS
6

The use of oversized bearings assures long life and quiet
operation.M otors in fram e sizes up to D 132 have sealed
bearings.Larger sizes have regreaseable bearings.
HARDWARE
A ll fastenings are zinc passivated for resistance to corrosion.
Threads are m etric.
1
2
6
7
8
3
5
4
(*) ThetermPremiumEfciencyinthisbrochurehasdifferent connotationto Table1 of IEC 60034-30
TOSHIBA INTERNATIONAL CORPORATION | 3
OUTPUT SHAFTS
7
O utput shafts are tted w ith w ater/dust excluders.
DURABLE NAMEPLATE
Stainless steel nam eplate provides com plete m otor ratings
including bearing sizes for quick reference.
CORROSION RESISTANT FINISH
8
Toshiba m otors are Phenol Resin prim ed and nished w ith
Polyurethane sem i-gloss.Standard colour is W ood Sm oke
G rey.C ustom er speci ed colours and paint nishes available.
CONNECTIONS
All m otors are tted w ith stud type term inal blocks w ith 6
(term inations) w inding leads.M otors in fram es D 112 and
below m ay be con gured for 220V-240V D elta or 380V-415V
Star operation,suitable for VVVF D rives.M otors in larger
fram es are suitable for D irect-on-line,Auto-transform er,Star-
D elta,Soft Starter and VVF D rives w ith 380V-415V supplies.
Therm istors are tted as standard on m otors,fram e D 160
and above and can be tted on sm aller sizes if speci ed.
Therm istor term inals are m arked T1,T2.
A n earthing term inal is provided inside the m ain term inal
box,w ith an additional external earthing facility on all fram es.
Toshiba m otors can be supplied w ound for voltages
up to 1100 volts.
ORDERING
W hen ordering please nom inate:kW ,rpm ,enclosure
classi cation (IP rating),m ountings type,e.g.foot, ange
or foot and ange,horizontal or vertical,shaft (shaft
direction up or dow n etc).
If in doubt about m otor selection,please provide starting
and application details.
G ive details of any additional speci cation or requirem ents.
DRIVE APPLICATIONS
M otors 4 pole and slow er are generally suitable for norm al
vee-belt drive.M otors of higher speeds are generally
for direct coupling only.For con rm ation of application
suitability,please contact Toshiba.
2 Pole m otors w ith fram es D 315 and above have
unidirectional fans,norm ally set for clockw ise rotation
w hen view ed from the drive end (C C W fans also available),
therefore direction of rotation for these m otors should
be stated at tim e of enquiry.
EXAMPLES OF COMMON MOUNTING ARRANGEMENTS
IM 1001B3
IM 3001 B5
IM 2001 B35
IM 1011 V5
IM 3011 V1
IM 2011 V15
IM 1031 V6
IM 3031 V3
IM 2031 V36
FO O T M O U N TED M O TO R:
2 bearings,shaft w ith one free
extension,stator fram e w ith feet.
FLA N G E M O U N TED M O TO R:
2 bearings,shaft w ith one free
extension,stator fram e w ithout
feet,large ange w ith clearance
xing holes.
FO O T A N D FLA N G E
M O U N TED M O TO R:
2 bearings,shaft w ith one
free extension,stator fram e w ith
feet,large ange w ith clearance
xing hole.
4 | TOSHIBA INTERNATIONAL CORPORATION
LOW VOLTAGE MOTOR RANGES
PREMIUM EFFICIENCY MOTORS
(Prem ium Ef ciency)
Ratings: 0.37kW to 800kW (200V - 1100V)
2,4,6,8 Pole (Specials Available)
Protection C lassi cation IP56 - IP66
Bene ts: H igh starting torque w ith low starting current
ensures prem ium perform ance under arduous
load conditions.Easily adapted for VVVF control
or reduced voltage starting,this range offers
a high degree of exibility in application w hile
providing ef cient perform ance.
LARGE HEAVY DUTY MOTORS
(H igh Ef ciency) - M otors A bove A S1359.30
Ratings: 185kW to 800kW (200V - 1100V)
2,4,6,8 Pole (Specials available)
Protection classi cation IP55 - IP66
Bene ts: D esigned and built for H eavy D uty Industrial
applications.A daptable for VVVF control or
reduced voltage starting,this range offers
a high degree of exibility in application.
HAZARDOUS AREA MOTORS
Both,Prem ium Ef ciency and H igh Ef ciency M otor ranges
are suitable for m odi cation to com ply w ith H azardous A rea
classi cations and are certi ed to current A ustralian and IEC
Standards. Refer to table on page 7,for m ore detail.
EXPLOSION PROTECTED MOTORS
Ratings: 0.37kW to 700kW (200V - 1100V)
2,4,6,8 Pole (Specials Available)
Ingress Protection C lassi cation IP55 - IP66
Ex d certi ed to current A ustralian and IEC
Standards including G roup 1 m ining.
Bene ts: Suitable for Industrial applications such as m ining
and petrochem ical.Versatile construction,side or
top m ounting of term inal box,foot,foot & ange
and ange m ounting options.M odi cations to
satisfy individual custom er requirem ents and
speci cations.Refer to Toshibas Flam eproof
C atalogue.
SPECIAL MOTORS
Toshiba offers a range of m otors to suit individual custom er
requirem ents.Special applications include - M ulti Speed
M otors,Brake M otors,D irect C urrent M otors,O pen D rip
Proof M otors,W ound Rotor M otors,Variable Speed M otors,
C EN ELEC and N EM A standard m otors and m ost special
application m otors.
PREM IU M EFFIC IEN C Y M O TO R
LA RG E H EAVY D U TY M O TO R - H IG H EFFIC IEN C Y
EX PLO SIO N PRO TEC TED M O TO R
TOSHIBA INTERNATIONAL CORPORATION | 5
DEFINITIONS AND FORMULE
Pow er: Pow er is the rate of doing w ork and in m etric system ,it
is expressed in W atts (W ) or often in kilow atts (kW ).
O utput Pow er of 3-Ph Electrical M otor:
P (kW ) = (1.732 x Line Voltage x Line C urrent x p.f.x (M otor Eff./100))
1000
P (kW ) = 0.746 x H orsepow er
Torque: Torque is a tw isting force about an axis of rotation.It
is m easured in units of force tim es distance from the
axis (N m ).For an electric m otor,Torque is its turning
capacity and hence,its m ost useful characteristic.
Torque and Pow er are related to each other
by the follow ing equation:
Pow er (kW ) = Torque (N m ) x Speed (rpm )
9550
Inertia: Inertia is the nam e for the tendency of an object in
m otion to rem ain in m otion.Typically for cylindrical
objects,it is given by:
G D
2
(kg-m
2
) = 1/2 x M ass x (D iam eter)
2
A cceleration Tim e A cceleration Tim e of a m otor is related to
Total Inertia at the m otor shaft as w ell as
A cceleration Torque by the follow ing equation:
A cc.Tim e (sec) = G D
2
(kg-m
2
) x C hange in Speed (rpm )
375 x A cc.Torque (N m )
A cc.Torque of a m otor can be approxim ated as follow s:
W here Ts = Starting Torque , Tb = Breakdow n Torque ,
TL = Load Torque at M otor Shaft.
Tacc = acc.tim e (sec).
MOTORS WITH VVVF DRIVES
M ore and m ore m otors in industries are getting driven by VVVF
drives for accurate speed control.W hile accurate speed control
results into better product quality end product and/or saving of
energy,perform ance of m otors w ith VVVF drives is considerably
different than w hen they are fed directly by m ains supply.
U nless the m otors have separate forced fan-cooling,reduced
speeds requires that their outputs are re-rated to allow generated
heat to be adequately dissipated.This is of particular im portance
w hen m otors are running at very slow speeds but still requiring
constant torques through out the speed range.
Further,unlike the m ains supply,VVVF supply voltage is non-
sinusoidal and is often in the form chopped w aveform s.This pulse
W idth M odulated (PW M ) w aveform has detrim ental effects on
m otor torque capability as w ell as its therm al characteristics.This
also calls for additional de-ration of its output.PW M chopped
w aveform also leads other m otor issues such as:
D ecreased Insulation life due to dv/dt effects as w ell as increased
voltage levels at the m otor term inals due to re ected w aves
Increased noise levels especially at low VVVF carrier frequencies
Reduced bearing life through Electric D ischarge M achining
(ED M ) effects.
M otor over-heating due to harm onics in PW M w aveform
Possibility of generating shaft currents
A s w ith m ost applications,proper investigation during project
conceptualization,as w ell as prior to actual installation,often
saves considerable tim e and m oney in solving som e of the above
m entioned issues.
W ith vast experience of Toshiba engineers,cost effective
and reliable M otor-D rive solutions can be ensured.Follow ing
inform ation helps in selecting the m ost optim um solution:
Type of Load / A pplication (e.g.C onveyor/Fan/Pum p/
M ixer etc)
KW and Torque required in the required speed range
Supply Voltage and Frequency w ith their tolerances
Environm ental C onditions (Tem perature/H azardous A rea etc)
C able length from VVVF to the m otor
ELECTROMAGNETIC COMPATIBILTY
Toshiba m otors and VVVF D rives com ply to Electrom agnetic
C om patibility (EM C ) regulations as per A ustralian C -Tick Schem e.
GENERAL INFORMATION
For C onstant Torque Loads (e.g.
C onveyors,M ixers etc)
Tacc = 0.4(Ts+ Tb)TL
For Q uadratic Torque Loads
(C ent.Fans / Pum ps)
Tacc = 0.4(Ts+ Tb)0.33 x TL
F
U
L
L

L
O
A
D
T
O
R
Q
U
E

(
%
)
C
U
R
R
E
N
T

(
%
)
MOTOR STARTING PERFORMANCE VERSUSSLIP CURVES
SLIP (%)
300
250
200
150
100
50
0
700
600
500
400
300
200
100
0
100 90 80 70 60 50 40 30 20 10 0
IA
TB
TS
6 | TOSHIBA INTERNATIONAL CORPORATION
Toshiba offers the w idest range of H azardous A rea certi ed
m otors in A ustralia.
Both our Prem ium Ef ciency and Energy Ef cient m otor
ranges are certi ed for m odi cation for use in hazardous areas
as per tables 1 and 2 on page 7.
SO M E TYPIC A L A REA S O F U SE
Petrochem ical,M ining,O il & G as,C hem ical.
FLAMEPROOF Ex d
M otors are constructed so as to contain an
internal explosion w ithin the m otor and prevent
the transm ission of am e to external atm osphere.
External tem perature during operation is kept such
that the surrounding am m able atm osphere cannot be ignited.
C ERTIFIC ATIO N A N D A PPRO VA LS
Toshibas Flam eproof m otors are Ex d approved for explosive
gase groups IIA ,IIB & IIC for tem perature class T4,and are
also approved for underground C oal M ines,apparatus group I
(m ethane).
For more information please refer to Toshibas
Flameproof Motor Catalogue.
INCREASED SAFETY Ex e
These m otors are not built to w ithstand an internal
explosion ( am eproof).They are designed to
ensure safety by m eans of a num ber of special
features to ensure freedom from arcs,sparks or
dangerous surface tem peratures.They resem ble
standard m otors in appearance but have special increased
safety term inals w ithin an IP56 term inal box.
The m ain features of increased safety m otors are:
Special attention to air gap concentricity and clearance of all
rotating parts
C om ponents subject to im pact tests
Tem perature rise 10C low er than the perm itted m axim um
for that class of insulation
M axim um surface tem perature T2 or T3
C om pliance w ith tE characteristics
Special term inal block to accom m odate speci ed creepage
and clearances
Term inal block m aterial ensures anti tracking

The m axim um surface tem perature (T) applies to all surfaces
of the m otor,both internal and external.U nder locked rotor
conditions,the rotor tem perature in certain designs increases
faster than that of the stator w indings.In either event this is
catered for in conjunction w ith the tE tim e.
tE TIME
tE tim e is de ned as the tim e taken for a.c.w indings w hen
carrying the starting current IA to be heated up from
tem perature reached in rated service and at m axim um
am bient tem perature,to the lim iting tem perature.In the graph
below ,A represents the m axim um am bient tem perature
and Brepresents tem perature reached under norm al load.
If fault occurs and the rotor becom es locked,then the
conditions show n in part 2 of the graph w ill apply.The m otor
tem perature w ill increase very rapidly to C ,w hich is less than
the T classi cation for the m otor. The tim e taken to reach
lim iting tem perature point cfrom tem preture level B is called
tE tim e.C ontrol gear m ust be provided to disconnect the
m otor from the supply w ithin this tim e tE.These m otors are
certi ed and suitable for use in zone 1 and have a m axim um
tem perature level of T3.They are intended for continuous
running and are unsuitable for duties involving frequent starts/
stops or long run-up tim es or VVVF operation.
MOTORS FOR HAZARDOUS AREAS
Ex
'
d
'
Ex
'
n
'
O = temperature C
A = max.ambient temperature
B = temperature in rated service
C = limitingtemperature
t = time
e = temperature
1 = temperature rise
in rated service
2 = temperature rise during
stalled motor test
Typical Ex e nam eplate
tE
1
2
c
b
a
0
e
t
TOSHIBA INTERNATIONAL CORPORATION | 7
NON SPARKING Ex n
These m otors are for use in Zone 2 hazardous locations.
The Ex n m otor is very sim ilar in construction to the TEFC
m achine.The m ain points of difference are:
Special attention to air gap concentricity and clearance
of all rotating parts
C om ponents subject to im pact test
M axim um internal or external surface tem perature T3
Term inal block m aterial to ensure anti-tracking
Special term inal block to stop creepage.
It can be observed that m any of the above Ex n features
are sim ilar to type Ex e except that the standard outputs
are obtained from these m otors,i.e.no de-rating is involved.
Because Ex n m otors are used in Zone 2 sem i-hazardous
locations,internal and external surfaces are lim ited to T3 at all
tim es except during the starting period.
DUST-EXCLUDING IGNITION-PROOF DIP
These m otors are built to exclude dust and to prevent,sparks
or heat otherw ise generated or liberated inside the enclosure
to cause ignition of exterior accum ulations or atm ospheric
suspensions of a speci c dust on or in the vicinity of the
enclosure.
D ust is excluded from the m otor and term inal box enclosure
and the exterior tem perature is kept below the ignition
tem perature of a dust cloud or layer,up to 5m m thick.A s a
rule dust layering should be avoided.
Exam ples of such dusts are w ood,starch,coal dust and grain
dusts including our,cocoa,sugar,m ilk pow der and tea,as w ell
as various m etals and chem icals including bronze,zinc,sulphur
and toner.
It should be noted that the distinction betw een dust types
does not affect the selection of equipm ent for dust areas.
H A ZA RD O U S A REA C LA SSIFIC ATIO N
Zone 0 Zone w here explosive
atm osphere is continuously
present for long periods
( > 1000 H rs)
Zone 1 Zone w here explosive
atm osphere is periodically
present in norm al operation
( > 10 H rs 1000 H rs)
Zone 2 Zone w here explosive
atm osphere is not likely to be
present in norm al operation and
if present it exists for short
periods only (< 10 H rs)
G A S G RO U PIN G FO R ELEC TRIC A L
A PPA RATU S EN 50014 A N D IEC 60079-0
G roup G as
I A ll underground C oal
M ining applications
Firedam p (m ethane)
IIA Industrial m ethane,propane,
gasoline and m ost industrial gases
IIB Ethylene,coke oven gas
and other industrial gases
IIC H ydrogen,acetylene,carbon
disulphide
Tem perature class T1 T2 T3 T4 T5 T6
Tem perature lim it C 450 300 200 135 100 85
G RO U P C LA SSIFIC ATIO N
G roup 1 C oal M ines
G roup 2 O ther
H A ZA RD C LA SSIFIC ATIO N
C lass 1 G as
C lass 2 D ust
TYPICAL TIC AUSTRALIAN / IEC STANDARD EXPLOSION PROTECTED CERTIFICATES
TYPE O F H A ZA RD EX PLO SIVE G A SES EX PLO SIVE D U STS
A rea of C lassi cation Zone 1 or 2 (C lass 1) Zone 2 (C lass 1)
Zone 21 (D IV 1)
Zone 22 (D IV 2)
Type of M otor Protection Explosion Protected Ex d Increased Safety Ex e N on-Sparking Ex n D ust Ignition Proof D IP
Toshiba C erti cations
of C om pliance
AU S Ex 00.3695X
AU S Ex 1174X IEC Ex TSA 09.0034X AU S Ex 1078X AU S Ex 00.3697X
AU S Ex 00.3698X
A pparatus G roup
IIA ,IIB & IIC
(including G RO U P I M ining)
IIA ,IIB & IIC IIA ,IIB & IIC ZO N E 21 & 22
Tem perature C lass T4 (options T5 & T6) T3 (and T2) T3 T4
Referenced Standards
IEC 60079
A S/N ZS 60079.1
A S/N ZS 60079.7
IEC 60079
A S/N ZS 60079.15
A N ZS 61241
8 | TOSHIBA INTERNATIONAL CORPORATION
PERFORMANCE DATA
PREM IU M EFFIC IEN C Y PERFO RM A N C E D ATA AT 415V - 50H z
Output
kW
RPM
Frame
Number
Full Load Current (A)
No
Load
Current
(A)
Locked
Rotor
Current
(%) F/L
Locked
Rotor
Torque
(%) F/L
Pull Up
Torque
(%) F/L
Break
Down
Torque
(%) F/L
Efciency (%) PowerFactor
RotorGD
2

(kg.m)
Sound
Pressure
dB(A) at
1 metre
@ 415V @ 400V @ 380V
Full Load 75% Load 50% Load Full Load 75% Load 50% Load
0.37
2830 D71 0.95 0.87 0.89 0.68 521 378 300 470 73.9 72.6 68.5 0.74 0.64 0.52 0.01 67
1410 D71M 1.05 1.05 1.05 0.79 571 383 306 396 75.5 73.9 69.1 0.65 0.56 0.43 0.01 56
900 D80 1.10 1.10 1.10 0.81 405 279 223 309 73.6 74.0 71.7 0.65 0.55 0.42 0.01 49
675 D90SL 1.40 1.40 1.40 1.11 333 199 179 232 67.1 65.5 60.1 0.54 0.46 0.36 0.02 45
0.55
2805 D71 1.18 1.19 1.22 0.64 594 226 190 300 77.4 78.4 77.0 0.84 0.76 0.63 0.01 67
1430 D80 1.32 1.32 1.33 0.95 784 433 350 481 80.8 79.4 75.2 0.72 0.62 0.48 0.01 56
895 D80 1.62 1.62 1.62 1.26 406 311 249 328 74.2 74.8 72.5 0.64 0.53 0.40 0.01 51
700 D90LL 1.90 1.90 1.90 1.50 375 234 211 257 73.2 72.1 67.6 0.55 0.46 0.35 0.03 48
0.75
2845 D80 1.6 1.6 1.6 0.9 850 450 370 537 81.6 80.8 77.5 0.81 0.73 0.61 0.01 55
1425 D80 1.8 1.7 1.8 1.2 725 406 355 426 82.2 81.5 78.3 0.73 0.64 0.50 0.01 53
945 D90SL 2.0 2.0 2.0 1.4 505 215 201 304 81.1 81.5 79.2 0.65 0.55 0.42 0.02 55
705 D100L 2.2 2.2 2.2 1.6 430 202 182 273 79.5 79.5 76.8 0.60 0.51 0.39 0.04 49
1.1
2855 D80 2.2 2.2 2.3 1.1 857 432 372 447 83.8 83.7 81.1 0.84 0.77 0.65 0.01 66
1420 D90SL 2.5 2.4 2.6 1.3 664 326 315 349 84.7 85.5 84.5 0.77 0.69 0.56 0.02 57
935 D90LL 2.7 2.7 2.8 1.6 490 215 196 255 80.9 81.5 79.5 0.71 0.63 0.50 0.03 57
695 D100L 3.2 3.2 3.3 2.2 397 198 178 209 78.7 79.4 77.4 0.61 0.53 0.41 0.05 51
1.5
2875 D90SL 2.7 2.8 2.9 1.0 802 303 235 379 87.4 88.2 87.6 0.87 0.83 0.73 0.01 64
1420 D90LL 3.3 3.3 3.4 1.9 675 358 286 390 86.2 87.1 86.3 0.74 0.66 0.52 0.02 53
945 D100L 3.5 3.5 3.6 2.2 571 300 282 350 85.0 85.3 82.8 0.70 0.62 0.49 0.05 51
710 D112ML 4.0 4.0 4.1 2.0 499 190 160 275 85.3 86.0 85.0 0.61 0.53 0.40 0.08 55
2.2
2875 D90LL 3.9 4.0 4.2 1.4 915 351 276 362 88.7 89.4 88.9 0.89 0.84 0.75 0.01 63
1425 D100L 4.4 4.4 4.6 2.1 727 302 261 388 87.1 87.7 86.9 0.81 0.74 0.62 0.04 57
960 D112ML 4.6 4.7 4.8 2.8 652 325 263 481 88.2 88.4 87.8 0.75 0.67 0.53 0.08 59
715 D132S 5.0 5.0 5.1 3.2 584 231 208 290 84.1 83.6 81.0 0.73 0.65 0.52 0.19 55
3
2910 D100L 5.4 5.5 5.7 2.0 898 329 256 382 88.3 88.2 86.5 0.88 0.85 0.76 0.03 73
1430 D100L 5.9 6.0 6.1 3.0 785 341 317 369 87.2 87.8 86.7 0.81 0.74 0.62 0.05 57
970 D132S 6.7 6.5 6.7 3.6 681 237 233 381 89.0 89.5 88.3 0.73 0.65 0.52 0.16 53
715 D132M 6.7 6.8 6.9 4.2 601 221 199 322 84.7 84.3 81.8 0.73 0.65 0.52 0.24 56
4
2905 D112ML 7.0 7.2 7.7 2.5 860 258 210 365 89.4 90.2 90.0 0.88 0.84 0.75 0.03 67
1450 D112ML 7.8 8.0 8.2 3.7 746 323 258 363 88.3 88.5 87.3 0.80 0.75 0.64 0.08 66
965 D132M 8.1 8.3 8.6 3.9 643 224 221 322 88.7 89.5 89.2 0.77 0.71 0.60 0.18 57
730 D160M 10.0 10.0 10.2 6.2 441 186 167 209 86.7 86.8 85 0.64 0.56 0.44 0.35 56
5.5
2915 D132S 10.0 10.0 10.5 2.9 679 263 254 308 91.3 91.5 90.3 0.86 0.84 0.77 0.07 64
1460 D132S 10.2 10.4 10.9 3.8 737 264 211 319 90.5 90.7 89.4 0.83 0.79 0.69 0.16 53
965 D132M 11.7 11.5 11.8 5.8 689 263 260 374 89.6 90.3 89.9 0.76 0.69 0.56 0.22 58
720 D160M 12.6 12.9 13.4 6.6 429 163 139 210 88.4 89.1 88.6 0.69 0.62 0.51 0.51 58
7.5
2915 D132S 12.9 13.3 14.0 3.5 802 242 194 355 91.7 91.7 91.1 0.88 0.86 0.81 0.08 61
1455 D132M 14.7 14.8 15.2 6.5 694 288 230 317 91.1 91.5 90.8 0.78 0.73 0.62 0.19 55
970 D160M 14.6 15.0 15.7 6.3 524 198 184 276 91.1 91.9 92.0 0.79 0.74 0.63 0.51 58
720 D160L 18.0 18.2 18.6 10.3 428 160 144 231 87.9 88.6 87.8 0.66 0.59 0.47 0.59 68
11
2925 D160M 18.1 18.8 19.8 4.1 702 216 147 311 92.6 92.9 92.3 0.91 0.90 0.86 0.18 77
1465 D160M 20.4 20.8 21.6 8.1 647 247 198 308 92.3 92.4 91.6 0.81 0.77 0.68 0.34 58
970 D160L 21.1 21.6 22.5 8.8 597 215 197 295 91.4 92.2 91.9 0.79 0.74 0.64 0.59 65
730 D180L 22.9 22.9 23.3 13.2 603 249 224 307 90.0 89.9 88.1 0.75 0.67 0.54 1.34 54
15
2925 D160M 24.9 25.8 27.6 6.1 699 205 136 307 92.3 92.7 92.1 0.91 0.89 0.84 0.20 73
1465 D160L 28.0 28.5 29.5 11.3 674 280 230 305 92.5 92.7 91.9 0.81 0.76 0.67 0.40 58
975 D180L 27.7 28.5 29.8 11.5 653 234 216 408 92.1 92.7 92.6 0.82 0.77 0.66 1.11 61
735 D200L 30.5 31.1 32.2 14.8 564 244 220 249 91.8 91.9 91.1 0.75 0.69 0.57 2.67 60
18.5
2940 D160L 30.8 31.7 33.2 8.9 844 292 252 343 93.6 93.6 92.7 0.89 0.86 0.80 0.23 80
1470 D180M 34.4 35.0 36.4 13.5 584 205 164 217 93.6 93.8 93.1 0.80 0.77 0.66 0.76 66
975 D200L 32.1 33.2 34.9 11.6 623 346 299 372 92.5 93.3 93.4 0.87 0.83 0.75 1.99 65
730 D225S 40.4 40.8 42.3 20.5 500 224 202 232 91.1 91.5 90.8 0.70 0.64 0.52 3.61 62
22
2955 D180M 36.8 37.9 39.8 9.9 785 282 226 308 93.9 93.9 93.0 0.89 0.86 0.80 0.46 65
1480 D180L 41.3 41.9 43.4 17.5 625 262 210 274 94.1 93.7 92.9 0.79 0.74 0.63 0.82 56
980 D200L 39.6 40.6 42.4 15.9 626 319 288 358 93.4 93.8 93.4 0.83 0.78 0.68 2.29 59
735 D225M 43.0 43.7 44.8 23.4 700 279 237 297 91.9 92.0 90.9 0.77 0.70 0.57 4.21 66
30
2950 D200L 50.8 52.5 55.1 13.3 697 249 206 327 93.1 92.8 91.7 0.88 0.87 0.83 0.85 85
1480 D200L 52.4 53.8 56.3 17.4 706 191 153 290 94.1 94.0 93.0 0.85 0.82 0.74 1.75 65
980 D225M 53.2 54.8 57.3 17.9 624 260 229 391 94.3 94.7 94.6 0.83 0.80 0.72 3.57 67
735 D250S 58.0 59.6 62.4 23.9 583 181 163 253 93.1 93.4 92.9 0.77 0.73 0.63 7.57 72
TOSHIBA INTERNATIONAL CORPORATION | 9
PERFORMANCE DATA
H IG H EFFIC IEN C Y PERFO RM A N C E D ATA AT 415V - 50H z
PERFORMANCE DATA
PREM IU M EFFIC IEN C Y PERFO RM A N C E D ATA AT 415V - 50H z
Output
kW
RPM
Frame
Number
Full Load Current (A)
No
Load
Current
(A)
Locked
Rotor
Current
(%) F/L
Locked
Rotor
Torque
(%) F/L
Pull Up
Torque
(%) F/L
Break
Down
Torque
(%) F/L
Efciency (%) PowerFactor
RotorGD
2

(kg.m)
Sound
Pressure
dB(A) at
1 metre
@ 415V @ 400V @ 380V
Full Load 75% Load 50% Load Full Load 75% Load 50% Load
37
2950 D200L 61 63 67 15 690 311 254 390 94.0 94.1 93.8 0.89 0.88 0.86 1.02 84
1480 D225S 68 69 72 27 705 210 168 314 94.6 94.5 93.8 0.80 0.75 0.66 2.27 67
985 D250S 67 69 73 23 561 277 252 336 94.5 94.8 94.6 0.81 0.78 0.70 5.95 71
740 D250M 73 74 76 34 633 188 169 228 93.5 93.7 93.0 0.75 0.70 0.58 8.83 66
45
2965 D225M 74 76 80 17 763 242 210 476 94.4 94.2 93.3 0.90 0.89 0.84 1.70 84
1480 D225M 80 82 86 27 650 219 180 346 95.1 95.3 94.3 0.82 0.80 0.70 2.56 66
985 D250M 83 84 88 33 669 353 282 354 94.9 94.9 94.4 0.80 0.75 0.65 7.28 66
740 D280S 87 89 93 37 641 262 210 316 93.7 93.8 93.0 0.77 0.72 0.62 14.1 55
55
2965 D250S 91 94 100 23 682 217 210 397 94.4 94.2 93.3 0.89 0.87 0.83 3.2 82
1480 D250S 98 100 104 34 716 204 219 163 94.4 94.2 93.3 0.83 0.79 0.71 4.2 72
990 D280S 99 102 107 34 670 231 218 380 95.4 95.5 95.0 0.81 0.78 0.70 10.8 67
740 D280M 107 109 114 48 678 204 176 223 94.2 94.3 93.6 0.76 0.71 0.60 18.2 58
75
2960 D250M 125 127 134 31 768 199 193 285 94.9 94.9 94.3 0.89 0.87 0.83 4.0 82
1485 D250M 131 134 139 44 741 200 175 280 95.6 95.9 95.9 0.84 0.80 0.74 5.4 68
990 D280M 139 143 148 43 639 227 215 405 95.6 95.9 95.8 0.78 0.76 0.68 14.8 69
740 D315S 140 144 150 53 679 282 240 360 94.1 94.6 94.4 0.80 0.76 0.66 21.7 57
90
2980 D280S 149 150 157 31 735 161 150 276 96.0 95.7 95.0 0.90 0.89 0.84 4.6 82
1485 D280S 151 155 164 40 699 178 134 246 95.6 95.5 94.7 0.87 0.85 0.80 8.8 77
985 D315S 158 163 171 52 659 248 210 263 95.6 95.8 95.3 0.83 0.80 0.72 18.0 70
745 D315M 173 175 180 84 656 254 229 311 94.7 94.5 93.5 0.77 0.70 0.58 27.8 63
110
2980 D280M 176 181 188 43 904 212 201 347 96.2 96.0 95.1 0.91 0.88 0.82 5.8 82
1470 D280M 179 185 194 46 716 261 214 282 95.3 95.3 94.6 0.91 0.89 0.84 10.6 75
985 D315M 193 199 209 60 664 197 180 296 95.7 95.8 95.4 0.83 0.80 0.73 20.1 74
132
2970 D315S 210 218 230 42 825 175 156 374 95.5 95.4 94.8 0.92 0.91 0.88 6.8 83
1485 D315S 224 233 247 41 602 255 193 205 95.5 95.7 95.3 0.86 0.86 0.82 13.1 80
985 D315M 230 237 248 73 677 215 187 273 95.6 96.0 95.5 0.83 0.81 0.73 22.8 70
150
2970 D315M 236 245 260 39 725 153 145 287 95.9 95.8 95.6 0.92 0.92 0.89 7.1 85
1480 D315M 245 255 272 45 644 253 191 207 95.5 95.7 95.3 0.89 0.89 0.86 15.1 78
985 D315M 263 272 285 86 741 253 208 310 95.8 96.0 95.6 0.83 0.80 0.73 19.1 71
H EAVY D U TY IN D U STRIA L - PREM IU M EFFIC IEN C Y PERFO RM A N C E D ATA AT 415V - 50H z
LA RG ER SIZES (BEYO N D A S 1359.30) AVA ILA BLE FRO M STO C K
Output
kW
RPM
Frame
Number
Full Load Current (A)
No
Load
Current
(A)
Locked
Rotor
Current
(%) F/L
Locked
Rotor
Torque
(%) F/L
Pull Up
Torque
(%) F/L
Break
Down
Torque
(%) F/L
Efciency (%) PowerFactor
RotorGD
2

(kg.m)
Sound
Pressure
dB(A) at 1
metre
@ 415V @ 400V @ 380V
Full Load 75% Load 50% Load Full Load 75% Load 50% Load
185 1480 D315M(F) 310 322 339 88 553 186 161 223 95.0 94.9 94 0.88 0.86 0.80 25 81
200
2970 D315M(F) 332 331 348 76 602 210 168 260 95.2 94.9 93.7 0.89 0.88 0.84 16 87
985 D315M(F) 371 376 384 178 624 212 180 252 95.0 95.1 94.2 0.79 0.73 0.61 27 79
220 1467 D315M(F) 375 387 407 115 531 204 177 237 94.8 94.8 93.8 0.87 0.85 0.78 25 84
250
2980 D315LL 430 430 404 120 733 255 170 295 95.9 95.9 95.2 0.90 0.88 0.81 24 89
1458 D315LL 430 443 465 132 506 194 169 242 94.5 94.4 93.3 0.86 0.84 0.77 37 84
985 D315LL 455 472 496 170 514 183 159 218 95.3 95.6 95.3 0.82 0.79 0.69 38 81
280 1468 D315LL 485 503 530 158 531 211 183 241 94.9 94.9 94.0 0.85 0.82 0.75 37 84
355 1475 D355LL 580 602 634 134 534 191 162 214 95.3 95.5 94.7 0.90 0.89 0.87 50 83
Note:For performance data on High EfciencyMotors >150kW,refer to page 14
10 | TOSHIBA INTERNATIONAL CORPORATION
FOOT MOUNTED
Illustration only
Not to scale
DIMENSIONS - PREMIUM EFFICIENCY
2, 4, 6, 8 POLE A LL D IM EN SIO N S (M M )
DIMENSIONS
FRAME
D71 D80 D90SL D90LL D100L D112ML D132S D132M D160M D160L D180M D180L
A 112 125 140 140 160 190 216 216 254 254 279 279
AA 35 35 40 40 45 40 50 50 60 60 60 60
AB 140 155 176 176 196 220 260 260 308 308 324 324
AC 160 180 207 207 223 242.5 284.5 284.5 324 324 390 390
AD 178 185 193 193 295 205 239 239 293 293 360 360
AE 135 145 142 142 166 158 181 181 220 220 275 275
AK M5 M6 M8 M8 M10 M10 M12 M12 M16 M16 M16 M16
B 90 100 100 125 140 140 140 178 210 254 241 279
BB 114 130 149 178 176 187 175 213 250 294 286 324
BK 18 20 25 25 28 28 28 28 36 36 36 36
C 45 50 56 56 63 70 89 89 108 108 121 121
D 14 19 24 24 28 28 38 38 42 42 48 48
E 30 40 50 50 60 60 80 80 110 110 110 110
ED 22 30 40 40 50 50 65 65 90 90 90 90
F 5 6 8 8 8 8 10 10 12 12 14 14
G 11 15.5 20 20 24 24 33 33 37 37 42.5 42.5
H 71 80 90 90 100 112 132 132 160 160 180 180
HA 8 8 10 10 12 12 15 15 18 18 20 20
HC 162 175 198 198
HD 246 274 316 316 373 373 440 440
HE 31.5 43.5 27.3 27.3 69 55 67.5 67.5 92.5 92.5 98 98
K 7 10 10 10 12 12 12 12 14.5 14.5 14.5 14.5
KK M20 M20 M20 M20 M20 M20 M25 M25 M32 M32 M40 M40
KT 5 6 7 7 7 7 8 8 8 8 9 9
L 234 274 327 356 376 401 450 488 603 647 677 715
WEIGHT** 17 24 26 29 44 53 113 85 136 158 205 217
** Weight is given in kgas an approximate value.
TOSHIBA INTERNATIONAL CORPORATION | 11
FOOT MOUNTED
Illustration only
Not to scale
** Weight is given in kgas an approximate value.
DIMENSIONS - PREMIUM EFFICIENCY
2, 4, 6, 8 POLE A LL D IM EN SIO N S (M M )
DIMENSIONS
FRAME LARGE FRAMES
D200L D225S D225M D250S D250M D280S D280M D315S D315M D315M(F) D315LL D355LL
A 318 356 356 406 406 457 457 508 508 508 508 610
AA 80 80 80 100 100 110 110 140 140 140 140 160
AB 378 416 416 486 486 560 560 630 630 645 645 710
AC 441 484 484 547 547 621 621 680 680 800 800 860
AD 385 410 410 520 520 545 545 552 552 850 850 890
AE 300 325 325 403 403 428 428 443 443 618 618 658
AK
2 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20
4, 6, 8 M20 M20 M20 M20 M20 M20 M20 M20 M20 M24 M24 M24
B 305 286 311 311 349 368 419 406 457 457 710 900
BB 360 366 391 415 449 440 490 480 530 530 782 1020
BK 42 42 42 42 42 42 42 42 42 30 36 36
C 133 149 149 168 168 190 190 216 216 216 216 254
D
2 55 - 55 60 60 65 65 65 65 65 65
4, 6, 8 55 60 60 70 70 80 80 85 85 95 110 110
E
2 110 110 140 140 140 140 140 140 140 140
4, 6, 8 110 140 140 140 140 170 170 170 170 170 210 210
ED
2 90 110 90 110 110 110 110 110 110 110 110
4, 6, 8 90 110 110 110 110 140 140 140 140 140 170 170
F
2 16 16 18 18 18 18 18 18 18 18
4, 6, 8 16 18 18 20 20 22 22 22 22 25 28 28
G
2 49 49 53 53 58 58 58 58 58 58
4, 6, 8 49 53 53 62.5 62.5 71 71 76 76 86 100 100
H 200 225 225 250 250 280 280 315 315 315 315 355
HA 20 22 22 30 30 30 30 35 35 35 35 40
HC
HD 486 538 538 618 618 675 695 738 738 740 740 835
HE 143 173 173 81 81 127 127 63 63 33 33 75
K 18.5 18.5 18.5 24 24 24 24 28 28 28 28 28
KK M50 M50 M50 M63 M63 M63 M63 M63 M63 NIL NIL NIL
KT
2 10 10 11 11 11 11 11 11 11 11
4, 6, 8 10 11 11 12 12 14 14 14 14 14 16 16
L
2 772.5 812 946.5 984.5 1083.5 1134.5 1224 1275 1392 1501
4, 6, 8 772.5 817 842 946.5 984.5 1113.5 1164.5 1341.5 1392.5 1434.5 1583.5 1902
WEIGHT** 321 395 418 597 680 824 943 1107 1319 1800 2050 2780
12 | TOSHIBA INTERNATIONAL CORPORATION
DIMENSIONS - PREMIUM EFFICIENCY
Illustration only
Not to scale
2, 4, 6, 8 POLE
FOOT & FLANGE MOUNTED
Flanges D71D200 4 hole xing
Flanges D225D315 8 hole xing
DIMENSIONS
FRAME
D71 D80 D90SL D90LL D100L D112ML D132S D132M D160M D160L D180M D180L
A 112 125 140 140 160 190 216 216 254 254 279 279
AA 35 35 40 40 45 40 50 50 60 60 60 60
AB 140 155 176 176 196 220 260 260 308 308 324 324
AC 184 207 207 223 243 284.5 284.5 350 350 390 390
AD 178 185 192.5 192.5 210 205 239 239 293 293 360 360
AE 135 144.5 142 142 167 158 181 181 220 220 275 275
AK M5 M6 M8 M8 M10 M10 M12 M12 M16 M16 M16 M16
B 90 100 100 125 140 140 140 178 210 254 241 279
BB 114 130 149 178 176 187 175 213 250 294 286 324
BK 18 20 25 25 28 28 28 28 36 36 36 36
C 74 50 56 56 63 70 89 89 108 108 121 121
D 14 19 24 24 28 28 38 38 42 42 48 48
E 30 40 50 50 60 60 80 80 110 110 110 110
ED 22 30 40 40 50 50 65 65 90 90 90 90
F 5 6 8 8 8 8 10 10 12 12 14 14
G 11 15.5 20 20 24 24 33 33 37 37 42.5 42.5
H 71 80 90 90 100 112 132 132 160 160 180 180
HA 8 8 10 10 12 12 15 15 18 18 20 20
HC 162 175 198 198
HD 246 274 316 316 373 373 440 440
HE 31.5 43.5 41 41 58 61 67.5 67.5 92.5 92.5 106 106
K 7 10 10 10 12 12 12 12 14.5 14.5 14.5 14.5
KK M20 M20 M20 M20 M20 M20 M25 M25 M32 M32 M40 M40
KT 5 6 7 7 7 7 8 8 8 8 9 9
L 273 274 327 356 369 401 450 488 603 647 676.5 714.5
M 130 165 165 165 215 215 265 265 300 300 300 300
N 110 130 130 130 180 180 230 230 250 250 250 250
P 160 200 200 200 250 250 300 300 350 350 350 350
S 10 12 12 12 14.5 14.5 14.5 14.5 18.5 18.5 18.5 18.5
T 3.5 3.5 3.5 3.5 4 4 4 4 5 5 5 5
HOLES 4 4 4 4 4 4 4 4 4 4 4 4
WEIGHT** 18 26 28 31 49 57 85 117 144 166 215 227
** Weight is given in kgas an approximate value. Angle for 4 hole = 45,8 hole = 22.5.
A LL D IM EN SIO N S (M M )
13
DIMENSIONS - PREMIUM EFFICIENCY
FOOT & FLANGE MOUNTED
Illustration only
Not to scale
2, 4, 6, 8 POLE
Flanges D71D200 4 hole xing
Flanges D225D315 8 hole xing
DIMENSIONS
FRAME LARGE FRAME
D200L D225S D225M D250S D250M D280S D280M D315S D315M D315M(F) D315LL D355LL
A 318 356 356 406 406 457 457 508 508 508 508 610
AA 80 80 80 100 100 110 110 140 140 140 140 160
AB 378 416 416 486 486 560 560 630 630 630 645 710
AC 441 N/A N/A N/A 547 621 621 680 680 760 800 860
AD 385 410 410 520 520 545 545 552 552 862 850 890
AE 300 325 325 403 403 428 428 443 443 628 618 658
AK
2 M20 M20 M20 M20 M20 M20 M20 M20 M24 M24 M24
4, 6, 8 M20 M20 M20 M20 M20 M20 M20 M20 M24 M24 M24 M24
B 305 286 311 311 349 368 419 406 457 457 710 900
BB 360 366 391 415 449 440 490 480 530 530 782 1020
BK 42 42 42 42 42 42 42 42 42 36 36 36
C 133 149 149 168 168 190 190 216 216 216 216 254
D
2 55 55 55 60 60 65 65 65 65 65 65 65
4, 6, 8 55 60 60 70 70 80 80 85 85 95 110 110
E
2 110 110 110 140 140 140 140 140 140 140 140 140
4, 6, 8 110 140 140 140 140 170 170 170 170 170 210 210
ED
2 90 90 90 110 110 110 110 110 110 110 110 110
4, 6, 8 90 110 110 110 110 140 140 140 140 140 170 170
F
2 16 16 16 18 18 18 18 18 18 18 18 18
4, 6, 8 16 18 18 20 20 22 22 22 22 25 28 28
G
2 49 49 49 53 53 58 58 58 58 58 58 58
4, 6, 8 49 53 53 62.5 62.5 71 71 76 76 86 100 100
H 200 225 225 250 250 280 280 315 315 315 315 355
HA 25 22 22 30 30 30 30 35 35 34 35 40
HD 486 538 538 618 618 675 670 738 738 735 740 835
HE 143 172 173 81 81 127 127 63 63 33 33 75
K 18.5 18.5 18.5 24 24 24 24 28 28 28 28 28
KK M50 M50 M50 M63 M63 M63 M63 M63 M63 NIL NIL NIL
KT
2 10 10 10 11 11 11 11 11 11 11 11 11
4, 6, 8 10 11 11 12 12 14 14 14 14 14 16 16
L
2 772.5 772 812 946.5 984.5 1135 1135 1330 1303 1392 1433.5 1965
4, 6, 8 772.5 817 842 946.5 984.5 1165 1165 1342 1393 1434.5 1583.5 1900
M 350 400 400 500 500 500 500 600 600 600 600 740
N 300 350 350 450 450 450 450 550 550 550 550 680
P 400 450 450 550 550 550 550 660 660 660 660 800
S 18.5 18.5 18.5 18.5 18.5 18.5 18.5 24 24 24 24 24
T 5 5 5 5 5 5 5 6 6 6 6 6
HOLES 4 8 8 8 8 8 8 8 8 8 8 8
WEIGHT** 329 416 439 627 710 844 963 1143 1355 1836 2100 2840
** Weight is given in kgas an approximate value. Angle for 4 hole = 45,8 hole = 22.5.
A LL D IM EN SIO N S (M M )
14 | TOSHIBA INTERNATIONAL CORPORATION
PERFORMANCE DATA
Frame Number D71 D80 D90S D90L D100L D112M D132S, M D160M, L D180M, L D200L
Poles 2, 4, 6, 8 2, 4, 6, 8 2, 4, 6, 8 2, 4, 6, 8 2, 4, 6, 8 2, 4, 6, 8 2, 4, 6, 8 2 4, 6, 8 2 4, 6, 8 2 4, 6, 8
Drive End 6203ZZ 6204ZZ 6205ZZ 6205ZZ 6206ZZ 6207ZZ 6308ZZ 6310C3 6310 6310C3 6310 6312C3 6312
NonDrive End 6203ZZ 6204ZZ 6205ZZ 6205ZZ 6206ZZ 6206ZZ 6208ZZ 6208C3 6208 6210C3 6210 6212C3 6212
Frame Number D225S, M D250S, M D280S, M D315S, M D315M D315LL D355LL
Poles 2 4, 6 2 4, 6 2 4, 6 2 4, 6 2 4, 6 2 4, 6 4, 6
Drive End 6312C3 NU215 6313C3 NU218 6314C3 NU220 6314C3 NU320 6314C3 NU2224 6314C3 NU2224 NU2224
NonDrive End 6312C3 6312 6313C3 6313 6313C3 6315 6313C3 6318 6313C3 6318 6313C3 6318 6320
REGREASING
M otors w ith grease nipples w ill
require periodic regreasing.W hen
regreasing,use only recom m ended
grease indicated below .The m otor
m ust be running and have grease exit
ports opened during lubrication. For
m otors requiring special types of
lubricant,the speci cation and quantity
of grease to be used are noted on the
nam eplate.M otors w ithout greasing
facilities are tted w ith sealed bearings.
Sealed bearings are prelubricated for
the life of the bearing but should be
m onitored by the user and replaced
w hen necessary.
RECOMMENDED GREASE
Toshiba recom m ends the use of Shell
A lvania RL 2 and RL 3 lithium based
grease.A lw ays regrease bearings w ith
the sam e grease type.
Note: Excess lubrication and/or incorrect grease
type maycause an increase in bearingtemperature.
This maylead to an increased risk of premature
bearingfailure.
Note: When regreasinga runningmotor ensure
all safetyprecautions are observed.Ensure that the
motor runs for a sufcient time to allowthe used
grease to purge before the exit ports are reclosed.
Bearing
No.
Grease
Qty
(Grams)
Replenish Intervals(days)
2P 4P 6P 8P
6208 25 70 130 130 130
6209 25 70 130 130 130
6210 30 70 130 130 130
6211 30 70 130 130 130
6212 30 70 130 130 130
6213 30 50 130 130 130
6214 30 50 130 130 130
6310 30 50 130 130 130
6311 30 50 130 130 130
6312 30 50 130 130 130
6313 30 50 130 130 130
6314 50 40 100 130 130
6315 50 40 100 130 130
6316 50 40 100 130 130
Bearing
No.
Grease
Qty
(Grams)
Replenish Intervals(days)
2P 4P 6P 8P
6317 80 N/A 100 130 130
6318 80 N/A 100 130 130
6319 80 N/A 100 130 130
6320 80 N/A 100 130 130
NU214 30 N/A 100 130 130
NU215 30 N/A 100 130 130
NU216 30 N/A 100 130 130
NU216 30 N/A 100 130 130
NU218 30 N/A 100 130 130
NU219 50 N/A 100 130 130
NU220 50 50 100 130 130
NU318 80 40 70 130 130
NU320 80 40 50 130 130
NU2224 115 30 80 115 130
Note: the above table is based ona motor runningfor 24 hours per day.For an8hour dutycycle multiplythe interval by3.
BEARING INFORMATION
BEA RIN G S FO R PREM IU M EFFIC IEN C Y M O TO RS
RE-G REA SIN G IN FO RM ATIO N TA BLE
H IG H EFFIC IEN C Y PERFO RM A N C E D ATA AT 415V - 50H z LA RG ER SIZES (BEYO N D A S 1359.30) AVA ILA BLE FRO M STO C K
Output
kW
RPM
Frame
Number
Full Load Current (A) No
Load
Current
(A)
Locked
Rotor
Current
(%) F/L
Locked
Rotor
Torque
(%) F/L
Pull Up
Torque
(%) F/L
Break
Down
Torque
(%) F/L
Efciency (%) PowerFactor
RotorGD
2

(kg.m)
Sound
Pressure
dB(A) at
1 metre*
@ 415V @ 400V @ 380V
Full Load 75% Load 50% Load Full Load 75% Load 50% Load
185
2955 D315M(F) 295 306 322 62 678 152 134 273 95.7 95.5 94.5 0.92 0.91 0.87 16 85
1480 D315M(F) 310 322 332 66 600 175 152 226 95.9 96.1 95.5 0.87 0.86 0.82 25 82
985 D315M(F) 314 387 407 99 637 140 119 225 95.9 96.0 95.0 0.86 0.84 0.78 27 83
200
2955 D315LL 323 335 335 54 619 143 126 243 95.5 95.3 94.8 0.92 0.92 0.90 16 85
1480 D315M(F) 316 TBA TBA 52 661 128 110 260 95.9 96.1 95.5 0.93 0.93 0.90 25 80
985 D315M(F) 339 TBA TBA 111 649 136 116 230 96.0 95.9 95.5 0.85 0.83 0.76 27 82
220
2955 D315LL 348 361 380 64 661 152 134 272 95.9 95.8 95.0 0.93 0.92 0.88 24 85
1480 D315M(F) 347 360 379 52 605 117 98 235 95.7 96.2 96.0 0.93 0.93 0.91 25 80
985 D315LL 373 TBA TBA 152 670 142 120 238 95.7 95.6 95.0 0.84 0.80 0.71 38 79
250
2955 D315LL 396 410 431 75 679 140 120 270 95.8 95.9 95.1 0.92 0.92 0.88 24 85
1485 D315LL 396 411 432 57 626 130 110 227 95.9 96.3 96.2 0.92 0.94 0.92 37 78
985 D315LL 421 437 460 166 641 140 120 235 96.0 95.5 95.0 0.84 0.81 0.72 38 83
280 1480 D315LL 432 459 483 76 773 166 125 260 95.9 96.0 95.5 0.94 0.93 0.91 37 81
315 1485 D355LL 498 517 544 75 592 131 110 210 95.5 95.8 95.4 0.92 0.93 0.91 50 82
355 1485 D355LL 559 TBA TBA 83 603 148 126 207 95.8 96.1 95.8 0.92 0.93 0.91 50 80
TOSHIBA INTERNATIONAL CORPORATION | 15
PAINTING
A typical custom er m odi cation is an enhanced painting system ,
w here a speci cation requires environm entally friendly low
VO C ,isocyanate free,superior corrosive protection,im proved
aesthetics,and extended durability,w e offer different system s to
m eet your requirem ents.
Perform ance of a paint coating is
in uenced by a num ber of variables
including atm ospheric aggressiveness,
surface preparation and the type and
thickness of paint.
TIC is capable of offering three
paint system s dependant on your
requirem ents:
A crylic high gloss nish, isocyanate free, w eather
resistant nish.
Epoxy,sem i gloss,low VO C ,high solids paint,providing
an excellent anti-corrosive barrier protection.
TIC actively prom otes the use of environm entally
sensitive products and also offer Polysiloxane,a
prem ium high perform ance,high solid,very low VO C ,
superior gloss,anti corrosive painting product.
The m inim um dry lm thickness is clearly a function of the
required duration and life cycle, but only to a certain practical
point, a m axim um of 210 m icrons for the harshest of conditions
is recom m ended.C ontact your local Toshiba International
C orporation of ce for further inform ation.
AVA ILA BLE C U STO M ISATIO N O PTIO N S
A nti C ondensation heaters Left hand side term inal box
Bearing change on N on drive end Lifting lugs Special ttings
Bearing change on D rive end Low noise fans
Bearing RTD s O il seals
Bearing sensors Painting to special colours Enam el
Brass gland plate Painting to special colours Epoxy
Blank identi cation nam eplate Painting to special colours Polyurethane
C aptive screw s for term inal box lids Porous (sintered bronze) drain plugs
C ast iron fan cover Rain hats
C onstant velocity cooling fan Renam eplate
D ual hand term inal boxes Routine test (nonw itnessed)
Earth brush and Insulated N on drive end housing for VSD applications Routine test (w itnessed)
Encoders Shaft dow n application m odi cations
Earth studs A dditional Shaft up application m odi cations
Feet rem oval Separate term inal box auxiliary connections
Flange tting Special non standard shafts and extensions
H azardous areas upgrades D ust-excluding Ignition Proof (D IP) Special voltage applications
H azardous areas upgrades Increased Safety (Ex-e) Stainless steel coal shield
H azardous areas upgrades N on Sparking (Ex-n) Stainless steel fan covers
Fail safe brake m otors Stainless steel sunshield
H igh grade balancing Stainless steel fasteners
Isonel W inding (tropic proo ng) Therm istors term inated in auxiliary box
IP65/IP66 protection rating upgrades W inding RTD s term inated in auxiliary box
B14A Flanges available
RAL 7003
M oss G rey
R64
Y14
G olden Yellow
X15
O range
B24
H arbour Blue
G22
Serpentine
The m ost com m on requested colours:
Distributed by:
NSW/ SYDNEY - Registered Ofce
Toshiba International C orporation Pty Ltd
2 M orton Street,
Parram atta N SW 2150
Tel:+ 61 2 9768 6600 Fax:+ 61 2 9890 7546
NSW/ MAITLAND
Toshiba International C orporation Pty Ltd
U nit 1,18 Kinta D rive
Beres eld N SW 2322
Ph:+ 61 2 4966 8124 Fax:+ 61 2 4966 8147
QUEENSLAND
Toshiba International C orporation Pty Ltd
U nit 4-20 Sm allw ood Place
M urarrie Q LD 4172
Ph:+ 61 7 3902 7888 Fax:+ 61 7 3902 7878
VICTORIA
Toshiba International C orporation Pty Ltd
411 Ferntree G ully Rd,
M ount W averley,VIC 3149
Tel:+ 61 3 8541 7960 Fax:+ 61 3 8541 7970
WESTERN AUSTRALIA
Toshiba International C orporation Pty Ltd
10 A nderson Place,
Perth International A irport,W A 6105
Tel:+ 61 8 6272 5600 Fax:+ 61 8 6272 5601
w w w .toshiba.com .au
Toshiba International C orporation Pty Ltd A BN :29 001 555 068
The inform ation in this brochure is subject to change w ithout notice.11/09
A00t1t0kAL PR00UC15
(0etai|ed cata|egues avai|ab|e)
AIter 5a|es 5ervice
P|ant Maintenance & Menitering
Asset Management
P|ant A||iance Management
AIter 5a|es 5ervice
P|ant Maintenance & Menitering
Asset Management
P|ant A||iance Management
Righ voltage AC Motor Explosion Protected Motor
Electronic Soft Starters
(;.kw - Mw)
Premium Efficiency AC Motor
Microwave 0ensity Meter
Large 0rivesJ0rive Systems
vzccc PLC
variable Speed 0rives
(c.kw - 6ckw)