Overshot
Releasing and Circulating Overshot is an external catch fishing tool
designed to retrieve tubular items from the well bore. It is rugged,
economical, and easy to use. Overshoots come with a wide range of available
accessories. These fishing tools have proven to be the most versatile and
reliable in the field.
Standard Components
Top sub - The top sub is the uppermost component of the assembly. It is
equipped with a box connection, as specified by the customer, to assure
proper make-up with the fishing string.
Bowl - The bowl is the major working component of the overshot. The upper
end of the bowl is threaded for assembly with the top sub. The lower end is
threaded for assembly with the standard guide.
Standard guide - The standard guide is the lowermost component of the
assembly. It guides the fish into the overshot, allowing the internal gripping
mechanism to properly engage and grip the fish.
Spiral Grapple - The spiral grapple is a left-hand helix that conforms to the
inside of the overshot bowl. Especially hardened wicker threads assure a
positive grip to engage the fish securely.
Type OD (mm) OD (in)
Max. Catch Size
Conn.
mm in
LT/S-T48A 92 3 5/8 48.3~55 1 7/8~2 11/64 NC26
LT/S-T60A 102 4 60.3~65.9 2 3/8~2 19/32 2 7/8 Reg.
LT/S-T73A 108 4 1/4 73~78 2 7/8~3 1/16 2 7/8 Reg.
LT/S-T89A 124 4 7/8 89~95 3 1/2~3 3/4 2 7/8 Reg.
LT/S-T102A 140 5 1/2 101.6~108 4~4 1/4 NC38
LT/S-T114A 152 6 141~121 4 1/2~4 3/4 4 1/2 Reg
LT/S-T48B 76 3 48.3 1 7/8 2 3/8 Reg
LT/S-T60B 86 3 3/8 60.3 2 3/8 NC26
LT/S-T73B 102 4 73 2 7/8 2 7/8 Reg
LT/S-T81B 114 4 1/2 81.5 3 13/64 NC31
LT/S-T89B 114 4 7/8 88.9 3 1/2 NC31
LT/S-T102B 124
101 4 2 7/8 Reg.
,
pdf
http://www.nov.com/uploadedFiles/Business_Groups/Downhole/Downhole_Tools/Fishing_Tools/Fishin
g%20Tool%20Broch%20-%20D391000198-MKT-001%20Rev05.pdf
Holly Pipe Corporation can fulfill any customer specification for fishing tools and rental services such as
wash-over pipe shoes and extentions, spears, mills, cut-lip guides, boot and junk baskets, stabilizers, pup
joints, lift subs and casing cutters and arms. Drillers working in the oil and gas, utility, geothermal, water
well, horizontal directional drilling (HDD), and trenchless underground construction industries rely on Holly
Pipe for dependable drill pipe and manufacturing services required to maintain a drill string and reduce
downtime in the field. Holly Pipe's experienced and knowledgable sales team can help you choose the
right drilling tools and equipment for your needs.
Wash-Over Pipe Shoes & Extensions
A wash-over pipe shoe is a short threaded pipe (3') that typically goes over "stuck" drill pipe. Wash pipe
generally "washes-over" and loosens up the formation that is preventing the drill pipe from turning.
A wash-over pipe shoe extension is used to allow the wash-over bit to swallow more of the stuck tubular
during the wash-over process.
Spears
A spear is a tool used to center up on the internal section of a broken or stuck tubular "fish," screw into it,
and pull out the remaining down-hole assembly.
Mills
A mill is a tool used to mill down on top of broken or sharp-edged drill pipe or casing and allow the
cuttings to flow back up to surface. Mills also are used to clean up the top of the casing area to allow an
easy fit for extraction tools.
Guides
A guide is a tool used to wash out and prevent skin friction.
Cut-Lip Guides
A cut-lip guide is a tool used to swallow the top of the stuck drill pipe or casing by rotating and using the
single "cut-lip" to go over the outside.
Boot Baskets
A boot basket is a tool used to run on top of a junk mill in order to catch cuttings. The boot basket pulls
the cuttings inside the cavities and carries them to the surface.
Junk Baskets
A junk basket is a tool used to swallow the piece intended for catching by folding underneath and pulling
up.
Stabilizers
A stabilizer typically centers the drill pipe or collars upon the drilling operation and is used to prevent
wearing out casing and down-hole tooling.
Pup Joints
A pup joint is a short piece of drill pipe used to lengthen drill string in order to compensate for tooling by
an increment of 3'-15' per joint.
Lift Subs
A lift sub is a tool typically used to screw into the collar section of the drill string in order to provide an
elevator area if the elevator is unable to grab.
Casing Cutters & Arms
A casing cutter is a mechanical or hydraulic tool which enables the driller to reach a certain depth and cut
the casing for removal. Casing cutters typically have extendable arms that reach the inside diameter in
order to rotate and cut through the casing wall.
For more information please contact us.
Return to top of page
http://www.hollypipe.com/fishing-tools-rentals.html#top
