Scribd
Upload
266 views2 pages

RT502x - SW - 21019 - Doc No 95 134496 PDF

This technical notification from Thrane & Thrane announces the release of a new software version (2.10.19) for their SAILOR RT5022 and RT5020 VHF DSC radios. The update corrects issues with DSC transmit call logs displaying unexpected symbols and allows 9 digit MMSI programming for ATIS code. It is recommended that the update be applied to units in stock or during normal service, and is available for download from their support website. The notification provides information on identifying the software and instructions for uploading the update.

Uploaded by

Geta Enache
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
266 views2 pages

RT502x - SW - 21019 - Doc No 95 134496 PDF

This technical notification from Thrane & Thrane announces the release of a new software version (2.10.19) for their SAILOR RT5022 and RT5020 VHF DSC radios. The update corrects issues with DSC transmit call logs displaying unexpected symbols and allows 9 digit MMSI programming for ATIS code. It is recommended that the update be applied to units in stock or during normal service, and is available for download from their support website. The notification provides information on identifying the software and instructions for uploading the update.

Uploaded by

Geta Enache
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Notification

Document number: 95-134496

Date: October 2011

SAILOR RT5022 VHF DSC & RT5020 Duplex VHF DSC

Subject:
New software release version 2.10.19

Priority:

LOW: It is recommended that this software release be applied to units in


stock. For units sold and/or in the field it is recommended that this
update be implemented during a normal service routine.
Service calls on symptoms reported as described below may be
successfully concluded by applying this revised software to the
equipment.

Identification:
A revised software identified as version 2.10.19 has just been released for the
VHF5000 series.
This version supersedes version 2.10.17 previously released for the
RT5020/RT5022 VHFs and introduces the following change:
1) Correction of VHF DSC transmit call log messages showing
Unexpected Symbols in Message!-Exiting".
2) Now possible to program 9 digits (MMSI) for ATIS code.

continued
Thrane & Thrane A/S Lundtoftegaardsvej 93 D DK-2800 Kgs. Lyngby Denmark
T +45 39 55 88 00 F +45 39 55 88 88 [email protected] www.thrane.com
Bank: Danske Bank Comp.reg.: 65 72 46 18 VAT: DK-20 64 64 46

Page 1 of 2

Document number: 95-134496

Template After Sales Service_TN_3 00_Rev_D

.continued

The software package is available for download at the Thrane & Thrane
eSupport download area: http://extranet.thrane.com/support.aspx
For details on how to upload the software package to the VHF radio refer to the
SB5006 Operator Manual.
This software package applies to both the RT5020 duplex VHF DSC and the
RT5022 simplex/semi-duplex VHF DSC, providing both of these with the
described correction and will be introduced gradually in our production.

Action:
No specific action is required except as stated above under Priority.

Thrane & Thrane


Customer Service

Author:

Date:

Checked:

Date:

Approved:

Date:

JKR

11-10-2011

FS

11-10-2011

GUJ

11-10-2011

Thrane & Thrane A/S Lundtoftegaardsvej 93 D DK-2800 Kgs. Lyngby Denmark


T +45 39 55 88 00 F +45 39 55 88 88 [email protected] www.thrane.com
Bank: Danske Bank Comp.reg.: 65 72 46 18 VAT: DK-20 64 64 46

Page 2 of 2

You might also like