STR-W6253MD
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
Features and Benefits
Description
Overcurrent protection (OCP) with AC input voltage
compensation function; no additional peripheral circuits
requiredminimizes dependency of OCP on ac input
Overload protection (OLP) with integrated timer reduces
power stress (temperature rise) at overload condition,
requires no peripheral components
Avalanche-guaranteed MOSFET improves device
capability of withstanding excess surge voltage,
providing a simple surge absorber circuit without
breakdown voltage derating
Start-up circuit eliminates the need for a start-up resistor,
and helps to reduce input power consumption
The STR-W6200D series are current-mode PWM ICs that
incorporate controller chips. These devices are manufactured
using a proprietary high-voltage BCD process, and avalancheguaranteed MOSFETs. These elements allow power supply
systems designs that are highly reliable and simple, with fewer
peripheral components. These ICs also provide Auto-Burst
mode operation, which lowers input power requirements at
light loads, and improves efficiency over the entire load range
and universal-input range.
Applicatons include:
Continued on the next page
Package: TO-220
TV set top box
LCD PC monitor, LCD TV
Printer, scanner
General consumer, PC, and industrial applications
requiring SMPS power supply with standby mode
Not to scale
Functional Block Diagram
STARTUP
VCC
D/ST
7.1 V
UVLO
REG
VREG
28.5 V
OVP
RST
ELP
TSD
RQ
DMAX 75%
PWM OSC
=1.6 mA
R
SQ
15.5 V/ 8.9 V
7.1 V
I startup
S
DRV
SQ
R
S2
Frequency
Modulation
FM/ELP
OLP
CK
S1
tOLP =
tFM 32 R
12 V
IDC
OCP
Soft Start
7.8 V
160 A
Feedback
Control
FB
Slope
Compensation
28103.54
LEB
S/OCP
GND
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Features and Benefits (continued)
Bias Assist function improves start-up performance by selfbiasing the VCC pin, and allows a use of a small value VCC
capacitor, resulting in improved response to overvoltage
conditions
Very low current consumption in nonoperating (UVLO) state:
ICC(off) = 5 A (typical) at VCC = 13.9 V
Slope compensation circuit stabilizes operation, preventing
interference from subharmonics
Leading Edge Blanking
Various protections:
Overcurrent Protection (OCP), pulse-by-pulse sensing
Overload Protection (OLP), auto restart after certain duration
External Latch Protection (ELP), latched
Overvoltage Protection (OVP), latched
Thermal Shut Down (TSD), latched
Externally-activated shut down protection (ELP) for
emergency system shut down
Auto-Burst Standby function (pin < 0.1 W at zero output load
condition)
TO-220 full-molded package with 6 pins
Selection Guide
Part Number
Packing
STRW6253MD
50 pieces per tube
Pin-out Diagram
Terminal List Table
Number
Name
D/ST
NC
S/OCP
Description
Functions
Drain/startup terminal
MOSFET drain and input of start-up signal
Clipped
No connection
Source/Overcurrent Protection
terminal
MOSFET source and input of overcurrent
detection signal
VCC
Power supply terminal
Input of power supply for control circuit
GND
Ground terminal
Ground
FB
Feedback terminal
Input of constant voltage control signal
FM/ELP
Frequency jittering/External Latch
Protection terminal
Control input for frequency jittering control and
External Latch Protection
1 2 3 4 5 6 7
All performance characteristics given are typical values for circuit or
system baseline design only and are at the nominal operating voltage and
an ambient temperature, TA, of 25C, unless otherwise stated.
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
ABSOLUTE MAXIMUM RATINGS at TA = 25C
Symbol
Terminal
Rating
Unit
Drain Current1
Characteristic
IDpeak
1-3
Single Pulse
Note
10
Maximum Switching Current2
IDMAX
1-3
TA = 20C to 125C
10
A
mJ
EAS
1-3
Single Pulse
86
ILpeak
1-3
VDD = 99 V, L = 20 mH
2.7
S/OCP Terminal Voltage
VOCP
3-5
6 to 6
FM/ELP Terminal Voltage
VFM
7-5
0.3 to 12
FM/ELP Terminal Inflow Current
IFM
7-5
mA
FB Terminal Voltage
VFB
6-5
0.3 to 9
Controller (MIC) Input Voltage
VCC
4-5
0 to 32
MOSFET Power Dissipation4
PD1
1-3
With infinite heatsink
27.5
Without heatsink
1.3
Controller (MIC) Power Dissipation
PD2
4-5
Operating Internal Frame Temperature
TF
Operating Ambient Temperature
Top
20 to 115
Storage Temperature
Tstg
40 to 125
Channel Junction Temperature
TJ
150
Single Pulse Avalanche Energy3
Refer to TOP
0.8
20 to 115
1Refer
to figure 1
2I
DMAX is the drain current on the D/ST pin determined by the drive voltage of the IC and the threshold voltage, Vth, of the MOSFET
3Refer to figure 3
4Refer to figure 5
Figure 1 MOSFET Safe Operating Area
Derating Curve
Figure 2 MOSFET Safe Operating Area
Drain Current versus Voltage
at TA = 25C, Single Pulse
100.00
80
Drain Current, ID (A)
10.00
60
40
0.
it
lim n)
nt S(o
re R D
r
Cu e to
du
1.00
s
1m
Safe Operating Area
Temperature Derating Coefficient (%)
100
0.10
20
Refer to figure 1 for MOSFET SOA
temperature derating coefficient
0.01
0
0
20
40
60
80
Temperature, TF (C)
100
120
10
100
1000
Drain-to-Source Voltage, VDS (V)
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Figure 3 MOSFET Avalanche Energy Derating Curve
Figure 4 Transient Thermal Resistance
10.00
Transient Thermal Resistance, RQJC (C/W)
80
60
40
20
1.00
0.10
0.01
0
25
50
75
100
125
150
10
100
1m
10m
100m
Time, t (s)
Channel Junction Temperature, TJ (C)
Figure 5 MOSFET Power Dissipation versus Temperature
30
25
Power Dissipation, PD1 (W)
EAS Temperature Derating Coefficient (%)
100
With infinite heatsink
PD1 = 27.5 W at TA 25C
20
15
10
Without heatsink
PD1 = 1.3 W at TA 25C
0
0
20
40
60
80
100
120
140
160
Ambient Temperature, TA (C)
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
ELECTRICAL CHARACTERISTICS valid at VCC = 18 V, TA = 25C, unless otherwise specified
Characteristic
Symbol Terminal
Test Conditions
Min.
Typ.
Max
Units
Power Supply Start-up Operation
Operation Start Voltage
VCC(ON)
4-5
(VCC voltage at which operation starts) Measurement
circuit 1, VCC = 0 through 13.9 to 17.1 V
13.9
15.5
17.1
Operation Stop Voltage
VCC(OFF)
4-5
(VCC voltage at which operation stops) Measurement
circuit 1, VCC = 17.1 through 9.8 to 8.0 V
8.0
8.9
9.8
ICC(ON)
4-5
(Inflow current into VCC terminal in oscillation)
Measurement circuit 1
1.4
2.8
mA
Circuit Current in Non-Oscillation
ICC(STOP)
4-5
(Inflow current into VCC terminal at VFB = 0 V)
Measurement circuit 1
0.8
1.3
mA
Circuit Current in Non-Operation
ICC(OFF)
4-5
(Inflow current into VCC terminal prior to oscillation)
Measurement circuit 1, VCC = 13.8
20
Start-up Current
Istartup
4-5
(Inflow current into D/ST terminal) Measurement
circuit 7, VCC = 0, D/ST = 450 V
0.9
1.6
2.3
mA
Bias Assist Voltage
VBIAS
4-5
(VCC voltage at which Istartup starts, and IstartupBias
begins) Measurement circuit 7, VCC = 17.1 through
13.6 to 16.8 V
13.6
15.2
16.8
FM/ELP High Threshold Voltage
VFM(H)
7-5
(FM/ELP terminal voltage at which IFM changes from
13 A to 13 A) Measurement circuit 2
4.0
4.5
5.0
FM/ELP Low Threshold Voltage
VFM(L)
7-5
(FM/ELP terminal voltage at which IFM changes from
13 A to 13 A) Measurement circuit 2
2.4
2.8
3.2
FM/ELP Voltage Difference
VFM
7-5
(VFM(H) VFM(L)) Measurement circuit 2
1.4
1.7
1.8
17.4
13
8.6
Circuit Current in Operation
Operating Characteristics
FM/ELP Outflow Current1
IFMsrc
7-5
(FM/ELP terminal outflow current at VFM = VFM(L))
Measurement circuit 2
FM/ELP Inflow Current1
IFMsink
7-5
(FM/ELP terminal inflow current at VFM = VFM(H))
Measurement circuit 2
8.6
13
17.4
Average Switching Frequency
fOSC(av)
1-5
(D/ST terminal average oscillation frequency)
Measurement circuit 2
60
67
74
kHz
1-5
fOSC (peak-to-peak) Measurement circuit 2
4.8
6.9
kHz
DMAX
1-5
(Maximum width of the low portion of the D/ST
terminal waveform) Measurement circuit 2
71
75
79
IFB(MAX)
6-5
(FB terminal outflow current at VFB = 0 V)
Measurement circuit 3
220
160
100
Standby Operation Start-up
Threshold Voltage
VSTBY
6-5
Set VFM = 0 V and decrease VFB (VSTBY is the FB
terminal voltage level at which D/ST changes from
low to high) Measurement circuit 3
0.99
1.10
1.21
Slope Compensation Start-up
Duty Cycle
DSLP
6-5
DSLP = (t3 / t4) 100 (see figure for measurement
circuit 4 for values of t) Measurement circuit 4
27
Slope Compensation Rate
SLP
6-5
SLP = 0.02 / (t2 t1) (see figure for measurement
circuit 4 for values of t) Measurement circuit 4
22
17
12
mV/s
Frequency Jitter Deviation
Maximum Duty Cycle (On-Duty)
Maximum Feedback Current1
Continued on next page
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
ELECTRICAL CHARACTERISTICS, continued, valid at VCC = 18 V, TA = 25C, unless otherwise specified
Characteristic
Symbol Terminal
Test Conditions
Min.
Typ.
Max
Units
Set VFM = 0 V and increase VOCP. (VOCP1 is the S/OCP
terminal voltage level at which D/ST changes from
low to high) Measurement circuit 5
0.71
0.78
0.86
Protection Operation
OCP Threshold Voltage at Zero
Duty Cycle (0% On-Duty)
VOCP1
3-5
DPC
DPC = 0.75 SLP / fOSC(av)
1.5
1.9
2.3
mV/
DC%
OCP Threshold Voltage After
Compensation
VOCP2
3-5
VOCP2 = DPC DMAX + VOCP1
0.82
0.93
1.04
Leading Edge Blanking Time
tblank
1-5
(The low portion of the D/ST terminal waveform at
VOCP = 2 V) Measurement circuit 5
280
400
520
ns
OLP Delay Time2
tOLP
1-5
(Time between setting FB terminal open and when
oscillation stops) Measurement circuit 6
400
ms
Circuit Current in OLP-Operation
ICC (OLP)
4-5
(Inflow current into VCC terminal after OLP operation)
Measurement circuit 6
1.2
1.9
mA
OVP Protection Voltage
VCC(OVP)
4-5
Set VFM = 0 V and increase VCC (VCC terminal
voltage at which the voltage of D/ST terminal is
switched from low to high) Measurement circuit 1,
VCC = 18.0 V through 27 to 30 V
27
28.5
30
Latch Circuit Sustaining Current3
ICC(La.H)
4-5
(Inflow current into VCC terminal after OVP operation)
Measurement circuit 1, VCC = 8 V
140
220
VCC(La.OFF)
4-5
(VCC voltage at which ICC is dropped below 20 A by
decreasing VCC after OVP operation)
VCC = 31.0 V through 7.8 to 6.4 V
6.4
7.1
7.8
ELP Threshold Voltage
VELP
7-5
(FM/ELP terminal voltage at which the oscillation of
the D/ST terminal waveform is stopped by increasing
VFM) Measurement circuit 2
6.4
7.1
7.8
Inflow Current at External Latch
Protection
IELP
7-5
55
100
TJTSD
135
Drain-to-Source Breakdown Voltage
VDSS
1-3
ID = 300 A, Measurement circuit 8
650
Drain Leakage Current
IDSS
1-3
VDS = 650 V, VCC = 13 V, Measurement circuit 7
300
ON-Resistance
RDS(ON)
1-3
ID = 1.2 A, VFM = 0 V Measurement circuit 10
1.9
Switching Time
tr
1-3
Measurement circuit 9
400
ns
Thermal Resistance
RJ-F
Measured between junction and internal frame
1.75
C/W
Single Pulse Avalanche Energy
EAS
Measurement circuit 11
Drain Peak Current Compensation
Coefficient
Latch Circuit Release Voltage3
Thermal Shutdown Operating
Temperature
Power MOSFET Characteristics
1Input
and output current polarity at the device pin; plus(+) represents sink and minus() represents source.
reference value when applying 47 nF between the FM/ELP terminal and GND.
3The latch circuit means a circuit operated ELP, OVP, TSD, and OLP.
2The
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Measurement Circuit 1
V CC(ON)
13.8V
STR-W6200D
D/ST
1
S/OCP VCC GND
3
FB
6
FM/
ELP
V CC
V FM
0V
V FB
0V
V CC(OVP)
18V
5V
A
ICC
V DD 10V
1F
V FB
V CC
8V
V CC(OFF)
3.65V
V CCc(La.OFF)
V OFF(FM)
0V
2V
VD
100
32V
VD
V FM
ICC
ICC(OFF)
ICC(STOP)
ICC(La.H)
ICC(ON)
Measurement Circuit 2
18V
V CC
5V
V FB
STR-W6200D
D/ST
1
S/OCP VCC GND
3
FB
6
FM/
ELP
VD
A
100
18V
V DD 10V
0V
0V
V FM
V FML
V FB
V FM
2.8Vtyp
Isrc(FM)
IFM
0A
V FML+(V FMH -V FML)/2
IELP
f =f osc(Hi)-f osc(Lo)
Dmax= t2/ t1100
Isnk(FM)
1F
V CC
V ELP
4.5Vtyp
V FMH
IFM
5V
t2
VD
f osc(Hi)
f osc(Lo)
f osc(av)
t1
Measurement Circuit 3
18V
V CC
5V
V FM
STR-W6200D
D/ST
1
S/OCP VCC GND
3
FM/
ELP
2V
V FB
V STBY
0V
IFB
VD
+
100
18V
V DD 10V
FB
0V
V CC
VD
1F
V FM
V FB
I FB
IFB(MAX)
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Measurement Circuit 4
18V
V CC
5V
3.65V
V FM
STR-W6200D
D/ST
1
VD
100
S/OCP VCC GND
3
FB
6
V FB
V DD 10V
V FB
V OCP
18V
FM/
ELP
1F
V FM
4V
V1
Internal feedback signal
0.68V
V1-0.02V
V1-0.04V
V OCP
t4
4V
V CC
VD
DSLP= t3 / t4 100
SLP = 0.02 / (t2-t1)
t1
t2
t3
t5(tblank)
Measurement Circuit 5
18V
V CC
5V
V FM
STR-W6200D
D/ST
1
VD
100
S/OCP VCC GND
3
FB
6
FM/
ELP
7
3.65V
0V
2V
V OCP1
V OCP
0V
V OCP
tblank
18V
V DD 20V
1F
V FM
V CC
VD
V D(Lo)
VOCP2 = (0.75 SLP / fOSC(av)) DMAX + VOCP1
Measurement Circuit 6
18 V
V CC
STR-W6200D
D/ST
1
S/OCP VCC GND
3
VD
100
ICC
A
FM/
ELP
SW
V FM
t FM
SW ONOFF
V FB
1F
V DD 10V
FB
7.8 V typ
V FB
V FM
47nF
VD
V CC 18V
ICC(OLP)
ICC
t OLP(= t FM32)
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Measurement Circuit 7
650V
400V
V DD
18V
STR-W6200D
D/ST
1
S/OCP VCC GND
3
ID
ICC
FB
6
V CC
FM/
ELP
13V
0V
V FM
V BIAS
5V
0V
A
ID
+
V DD
V CC
IDSS
V FM
ICC
1F
ISTARTUP
Measurement Circuit 8
STR-W6200D
D/ST
1
S/OCP VCC GND
3
FB
6
FM/
ELP
7
Measurement Circuit 9
STR-W6200D
D/ST S/OCP
1
VD
VCC GND
4
FB
6
FM/
ELP
VD
10V
90%
VD
ID
300
A
18V
V FM
1F
47nF
V CC
100
18V
V DD 10V
10%
V FM
1F
47nF
V CC
tf
Measurement Circuit 10
18V
V CC
STR-W6200D
D/ST
1
S/OCP VCC GND
3
FB
6
FM/
ELP
7
VD
V
ID
0.6A
5V
V FM
0V
18V
V CC
1F
V FM
VD
V D(Lo)
RDS(ON) =V D(Lo) / 1.2
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
Measurement Circuit 11
Vcc
STR-W6200D
D/ST S/OCP
VCC GND
4
V DD
FB
6
FM/
ELP
18V
8V
V GS
V DSpeak
V DS 18V
V GS
IL
1F
V DD
V DS
V CC
TYPICAL APPLICATION CIRCUIT
O UT
V IN ( ac)
D/ST
VCC
S T R -W 6200D
FM /
S/O C P ELP
3
7
GND
5
FB
6
G ND
Option
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
10
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
PACKAGE DIMENSIONS, TO-220
Branding
XXXXXXXX
XXXXXXXX
2.6 0.1
R
(2
Terminal dimension at case surface
+0.2
(5.4)
0.65 0.1
10.4 0.5
2.8
5.0 0.5
1)
0.74 0.15
3.2 0.2
16.9 0.3
2.8 0.2
7.9 0.2
Gate Burr
4.2 0.2
4 0.2
10.0 0.2
+0.2
View A
6P1.27 0.15 = 7.62 0.15
Terminal dimensions at case surface
0.45 0.1
View B
5.08 0.6
Terminal dimension at lead tips
0.5 MAX
1 2 3 4 5 6 7
Terminal core material: Cu
Terminal treatment: Ni plating and solder dip
Leadform: 2003
Weight (approximate): 2.3 g
Dimensions in millimeters
Deflection at pin bend
View A
0.5 MAX
Deflection at pin tip
View B
Drawing for reference only
Branding codes (exact appearance at manufacturer discretion):
1st line, type: W6253DM
2nd line, lot:
YMDD R
Where: Y is the last digit of the year of manufacture
M is the month (1 to 9, O, N, D)
DD is the 2-digit date
R is the manufacturer registration symbol
Leadframe plating Pb-free. Device composition
complies with the RoHS directive.
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
11
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
STR-W6253MD
PACKING SPECIFICATIONS
Minimum packing option: Tube FM-205 E
4.8
+0.4
0
1.4
5.1
9 R0.6
35.0
(15.4)
9.50.1
+0.3
8.9
Shipping Tube Dimensions:
Wall thickness: 0.60.3 mm
Wall warp: <2 mm
Material: Hardened polyvinyl
Coating: antistatic
Tolerance 0.4 mm,
unless otherwise specified
Side marked
ANTISTATIC
2.85
+0.3
(3.6)
1.3 0.2
14.3
Spacer
Carton
(side
view)
Tube
Shipping Carton Dimensions:
Capacity: 1800 pieces maximum per carton
36 tubes per carton
3 rows, 12 tubes per row
Spacer
620
125
Tube
All dimensions: mm
185
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
12
STR-W6253MD
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
WARNING These devices are designed to be operated at lethal voltages and energy levels. Circuit designs
that embody these components must conform with applicable safety requirements. Precautions must be
taken to prevent accidental contact with power-line potentials. Do not connect grounded test equipment.
The use of an isolation transformer is recommended during circuit development and breadboarding.
Because reliability can be affected adversely by improper storage environments and handling methods, please observe the following cautions.
Cautions for Storage
Ensure that storage conditions comply with the standard temperature (5C to 35C) and the standard relative humidity (around 40 to 75%); avoid
storage locations that experience extreme changes in temperature or humidity.
Avoid locations where dust or harmful gases are present and avoid direct sunlight.
Reinspect for rust in leads and solderability of products that have been stored for a long time.
Cautions for Testing and Handling
When tests are carried out during inspection testing and other standard test periods, protect the products from power surges from the testing device,
shorts between adjacent products, and shorts to the heatsink.
Remarks About Using Silicone Grease with a Heatsink
When silicone grease is used in mounting this product on a heatsink, it shall be applied evenly and thinly. If more silicone grease than required is
applied, it may produce stress.
Volatile-type silicone greases may produce cracks after long periods of time, resulting in reduced heat radiation effect. Silicone grease with low
consistency (hard grease) may cause cracks in the mold resin when screwing the product to a heatsink.
Our recommended silicone greases for heat radiation purposes, which will not cause any adverse effect on the product life, are indicated below:
Type
Suppliers
G746
Shin-Etsu Chemical Co., Ltd.
YG6260
GE Toshiba Silicone Co., Ltd.
SC102
Dow Corning Toray Co., Ltd.
Soldering
When soldering the products, please be sure to minimize the working time, within the following limits:
2605C 10 s
3505C 3 s
Soldering iron should be at a distance of at least 1.5 mm from the body of the products
Electrostatic Discharge
When handling the products, operator must be grounded. Grounded wrist straps worn should have at least 1 M of resistance to ground to prevent
shock hazard.
Workbenches where the products are handled should be grounded and be provided with conductive table and floor mats.
When using measuring equipment such as a curve tracer, the equipment should be grounded.
When soldering the products, the head of soldering irons or the solder bath must be grounded in other to prevent leak voltages generated by them
from being applied to the products.
The products should always be stored and transported in our shipping containers or conductive containers, or be wrapped in aluminum foil.
Assembly
During soldering or other operations, the interior frame temperature of the device should never exceed 105C.
Recommended screw torque through the mounting tab is 0.588 to 0.785 N m (6 to 8 kgf cm)
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
13
STR-W6253MD
60 W-Universal Input/90 W-230 Vac Input
PWM Switching Regulators
The products described herein are manufactured in Japan by Sanken Electric Co., Ltd. for sale by Allegro MicroSystems, Inc.
Sanken and Allegro reserve the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this
publication is current before placing any order.
When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users
responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products
at a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems
against any possible injury, death, fires or damages to society due to device failure or malfunction.
Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus
(home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation
hardness assurance (e.g., aerospace equipment) is not supported.
When considering the use of Sanken products in applications where higher reliability is required (transportation equipment and its control systems
or equipment, fire- or burglar-alarm systems, various safety devices, etc.), contact a company sales representative to discuss and obtain written
confirmation of your specifications.
The use of Sanken products without the written consent of Sanken in applications where extremely high reliability is required (aerospace equipment, nuclear power-control stations, life-support systems, etc.) is strictly prohibited.
The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are
given for reference only and Sanken and Allegro assume no responsibility for any infringement of industrial property rights, intellectual property
rights, or any other rights of Sanken or Allegro or any third party that may result from its use.
Copyright 2007 Allegro MicroSystems, Inc.
This datasheet is based on Sanken datasheet SSE24071
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
14
