Harmonised Standards of Directive 97/23/EC
Short name:
Pressure equipment
Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the
approximation of the laws of the Member States concerning pressure equipment
Base:
(OJ No L 181 of 1997-07-09)
Modification:
[-]
Directives
repealed:
[-]
Application
Guide:
In preparation
DG Enterprise & Industry
EC contact
point:
Mr. Hans DHOOGE
Fax. +32.2.2967013/2998029
E-mail
Website of Pressure Equipment
Commission communication in the framework of the implementation of the Directive 97/23/EC of the European
Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning
pressure equipment - OJ C 309 of 18/12/2009
Summary list of titles and references harmonised standards under Directive 97/23/EC for Pressure equipment
The summary list hereunder is a compilation of the references of harmonised standards which have been
generated by the HAS (Harmonised standards) database. This IT application HAS automates the process of the
publication of the references of harmonised standards in the Official Journal of the European Union.
Although the list is updated regularly, it may not be complete and it does not have any legal validity; only
publication in the Official Journal gives legal affect.
The following list contains references to harmonised standards for pressure equipment and harmonised
supporting standards for materials used in manufacturing pressure equipment. In the case of a harmonised
supporting standard for materials, presumption of conformity to the essential safety requirements is limited to
technical data of materials in the standard and does not presume adequacy of the material to a specific item of
equipment. Consequently the technical data stated in the material standard shall be assessed against the design
requirements of this specific item of equipment to verify that the essential safety requirements of the PED are
satisfied.
ESO
(1)
Reference and title of the harmonised standard
(and reference document)
EN 3-8:2006
CEN
Portable fire extinguishers - Part 8: Additional requirements to
EN 3-7 for the construction, resistance to pressure and
mechanical tests for extinguishers with a maximum allowable
pressure equal to or lower than 30 bar
Reference of
superseded
standard
Date of cessation of presumption of
conformity of superseded standard
Note 1
EN 3-8:2006/AC:2007
CEN
EN 19:2002
Industrial valves - Marking of metallic valves
EN 287-1:2004
Qualification test of welders - Fusion welding - Part 1: Steels
CEN
EN 287-1:2004/A2:2006
Note 3
Date expired
(30/09/2006)
EN 287-1:2004/AC:2004
CEN
CEN
EN 334:2005+A1:2009
CEN
Note 2.1
EN 378-2:2008+A1:2009
EN 3782:2008
Refrigerating systems and heat pumps - Safety and
environmental requirements - Part 2: Design, construction,
testing, marking and documentation
Non-destructive testing - Qualification and certification of NDT
personnel - General principles
EN 593:2009
Industrial valves - Metallic butterfly valves
EN 676:2003+A2:2008
CEN
Automatic forced draught burners for gaseous fuels
EN 676:2003+A2:2008/AC:2008
EN 764-5:2002
CEN
Pressure Equipment - Part 5: Compliance and Inspection
Documentation of Materials
EN 764-7:2002
CEN
Pressure equipment - Part 7: Safety systems for unfired
pressure equipment
EN 764-7:2002/AC:2006
EN 1057:2006
CEN
Copper and copper alloys - Seamless, round copper tubes for
water and gas in sanitary and heating applications
EN 1092-1:2007
CEN
Flanges and their joints - Circular flanges for pipes, valves,
fittings and accessories, PN designated - Part 1: Steel flanges
EN 1092-3:2003
CEN
Flanges and their joints - Circular flanges for pipes, valves,
fittings and accessories, PN designated - Part 3: Copper alloy
flanges
EN 1092-3:2003/AC:2007
EN 1092-4:2002
CEN
CEN
31/07/2009
Gas pressure regulators for inlet pressures up to 100 bar
EN 473:2008
CEN
EN 334:2005
Flanges and their joints - Circular flanges for pipes, valves,
fittings and accessories, PN designated - Part 4: Aluminium
alloy flanges
EN 1171:2002
Industrial valves - Cast iron gate valves
28/12/2009
Note 2.1
EN 473:2000
Note 2.1
Date expired
(31/12/2008)
EN 593:2004
31/12/2009
Note 2.1
EN 1252-1:1998
CEN
Cryogenic vessels - Materials - Part 1: Toughness
requirements for temperatures below -80C
EN 1252-1:1998/AC:1998
EN 1252-2:2001
CEN
Cryogenic vessels - Materials - Part 2: Toughness
requirements for temperatures between -80C and -20C
EN 1349:2000
CEN
Industrial process control valves
EN 1349:2000/AC:2001
EN 1562:1997
Founding - Malleable cast irons
CEN
Note 3
Date expired
(31/12/2006)
EN 1563:1997/A1:2002
Note 3
Date expired
(30/11/2002)
EN 1563:1997/A2:2005
Note 3
Date expired
(31/01/2006)
Note 3
Date expired
(31/07/2006)
EN 1562:1997/A1:2006
EN 1563:1997
Founding - Spheroidal graphite cast irons
CEN
EN 1564:1997
Founding - Austempered ductile cast irons
CEN
EN 1564:1997/A1:2006
EN 1591-1:2001+A1:2009
CEN
CEN
Flanges and their joints - Design rules for gasketed circular
flange connections - Part 1: Calculation method
EN 1626:2008
Cryogenic vessels - Valves for cryogenic service
EN 15911:2001
30/09/2009
Note 2.1
EN 1626:1999
31/05/2009
Note 2.1
EN 1653:1997
CEN
Copper and copper alloys - Plate, sheet and circles for boilers,
pressure vessels and hot water storage units
EN 1653:1997/A1:2000
Note 3
Date expired
(28/02/2001)
EN 17971:1998
Date expired
(31/01/2002)
EN 1759-3:2003
CEN
Flanges and their joints - Circular flanges for pipes, valves,
fittings and accessories, Class designated - Part 3: Copper
alloy flanges
EN 1759-3:2003/AC:2004
EN 1759-4:2003
CEN
CEN
Flanges and their joint - Circular flanges for pipes, valves,
fittings and accessories, class designated - Part 4: Aluminium
alloy flanges
EN 1797:2001
Cryogenic vessels - Gas/material compatibility
Note 2.1
CEN
CEN
CEN
EN 1866:2005
Mobile fire extinguishers
EN 1983:2006
Industrial valves - Steel ball valves
EN 1984:2000
Industrial valves - Steel gate valves
EN ISO 4126-1:2004
CEN
Safety devices for protection against excessive pressure - Part
1: Safety valves (ISO 4126-1:2004)
EN ISO 4126-1:2004/AC:2006
EN ISO 4126-3:2006
CEN
Safety devices for protection against excessive pressure - Part
3: Safety valves and bursting disc safety devices in
combination (ISO 4126-3:2006)
EN ISO 4126-4:2004
CEN
Safety devices for protection against excessive pressure - Part
4: Pilot operated safety valves (ISO 4126-4:2004)
EN ISO 4126-5:2004
CEN
Safety devices for protection against excessive pressure - Part
5: Controlled safety pressure relief systems (CSPRS) (ISO
4126-5:2004)
EN ISO 4126-5:2004/AC:2008
EN ISO 9606-2:2004
CEN
Qualification test of welders - Fusion welding - Part 2:
Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 9606-3:1999
CEN
Approval testing of welders - Fusion welding - Part 3: Copper
and copper alloys (ISO 9606-3:1999)
EN ISO 9606-4:1999
CEN
Approval testing of welders - Fusion welding - Part 4: Nickel
and nickel alloys (ISO 9606-4:1999)
EN ISO 9606-5:2000
CEN
Approval testing of welders - Fusion welding - Part 5: Titanium
and titanium alloys, zirconium and zirconium alloys (ISO 96065:2000)
EN 10028-1:2007+A1:2009
CEN
Flat products made of steels for pressure purposes - Part 1:
General requirements
EN 10028-2:2009
CEN
Flat products made of steels for pressure purposes - Part 2:
Non-alloy and alloy steels with specified elevated temperature
properties
EN 10028-3:2009
CEN
Flat products made of steels for pressure purposes - Part 3:
Weldable fine grain steels, normalized
EN 10028-4:2009
CEN
Flat products made of steels for pressure purposes - Part 4:
Nickel alloy steels with specified low temperature properties
EN 100281:2007
31/10/2009
Note 2.1
EN 100282:2003
31/12/2009
Note 2.1
EN 100283:2003
31/12/2009
Note 2.1
EN 100284:2003
Note 2.1
31/12/2009
EN 10028-5:2009
CEN
Flat products made of steels for pressure purposes - Part 5:
Weldable fine grain steels, thermomechanically rolled
EN 10028-6:2009
CEN
Flat products made of steels for pressure purposes - Part 6:
Weldable fine grain steels, quenched and tempered
EN 10028-7:2007
CEN
CEN
Flat products made of steels for pressure purposes - Part 7:
Stainless steels
31/12/2009
Note 2.1
EN 100286:2003
31/12/2009
Note 2.1
EN 100287:2000
Date expired
(30/06/2008)
Note 2.1
EN 10204:2004
Metallic products - Types of inspection documents
EN 10213:2007
CEN
EN 100285:2003
Steel castings for pressure purposes
EN 102133:1995
EN 102134:1995
EN 102132:1995
EN 102131:1995
Date expired
(31/05/2008)
Note 2.1
EN 10213:2007/AC:2008
EN 10216-1:2002
CEN
CEN
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 1: Non-alloy steel tubes with specified
room temperature properties
EN 10216-1:2002/A1:2004
Note 3
EN 10216-2:2002+A2:2007
EN 102162:2002
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Non-alloy and alloy steel tubes with
specified elevated temperature properties
Date expired
(30/09/2004)
Date expired
(29/02/2008)
Note 2.1
EN 10216-3:2002
CEN
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10216-3:2002/A1:2004
Note 3
Date expired
(30/09/2004)
Note 3
Date expired
(30/09/2004)
EN 10216-4:2002
CEN
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 4: Non-alloy and alloy steel tubes with
specified low temperature properties
EN 10216-4:2002/A1:2004
EN 10216-5:2004
CEN
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 5: Stainless steel tubes
EN 10216-5:2004/AC:2008
EN 10217-1:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 1: Non-alloy steel tubes with specified room
temperature properties
EN 10217-1:2002/A1:2005
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/07/2005)
Note 3
Date expired
(31/10/2002)
EN 10217-2:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 2: Electric welded non-alloy and alloy steel
tubes with specified elevated temperature properties
EN 10217-2:2002/A1:2005
EN 10217-3:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 3: Alloy fine grain steel tubes
EN 10217-3:2002/A1:2005
EN 10217-4:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 4: Electric welded non-alloy steel tubes with
specified low temperature properties
EN 10217-4:2002/A1:2005
EN 10217-5:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 5: Submerged arc welded non-alloy and alloy
steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005
EN 10217-6:2002
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 6: Submerged arc welded non-alloy steel
tubes with specified low temperature properties
EN 10217-6:2002/A1:2005
EN 10217-7:2005
CEN
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 7: Stainless steel tubes
EN 10222-1:1998
CEN
Steel forgings for pressure purposes - Part 1: General
requirements for open die forgings
EN 10222-1:1998/A1:2002
EN 10222-2:1999
CEN
Steel forgings for pressure purposes - Part 2: Ferritic and
martensitic steels with specified elevated temperature
properties
EN 10222-2:1999/AC:2000
EN 10222-3:1998
CEN
Steel forgings for pressure purposes - Part 3: Nickel steels with
specified low temperature properties
CEN
EN 10222-4:1998
Steel forgings for pressure purposes - Part 4: Weldable fine
grain steels with high proof strength
EN 10222-4:1998/A1:2001
Note 3
Date expired
(31/01/2002)
Note 3
Date expired
(31/10/2006)
EN 10222-5:1999
CEN
Steel forgings for pressure purposes - Part 5: Martensitic,
austenitic and austenitic-ferritic stainless steels
EN 10222-5:1999/AC:2000
EN 10253-2:2007
CEN
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy
steels with specific inspection requirements
EN 10253-4:2008
CEN
Butt-welding pipe fittings - Part 4: Wrought austenitic and
austenitic-ferritic (duplex) stainless steels with specific
inspection requirements
EN 10253-4:2008/AC:2009
EN 10269:1999
Steels and nickel alloys for fasteners with specified elevated
and/or low temperature properties
CEN
EN 10269:1999/A1:2006
EN 10269:1999/A1:2006/AC:2008
CEN
EN 10272:2007
Stainless steel bars for pressure purposes
EN 10273:2007
CEN
Hot rolled weldable steel bars for pressure purposes with
specified elevated temperature properties
EN 10305-4:2003
CEN
Steel tubes for precision applications - Technical delivery
conditions - Part 4: Seamless cold drawn tubes for hydraulic
and pneumatic power systems
EN 10305-6:2005
CEN
Steel tubes for precision applications - Technical delivery
conditions - Part 6: Welded cold drawn tubes for hydraulic and
pneumatic power systems
EN ISO 10931:2005
CEN
Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) - Specifications for
components and the system (ISO 10931:2005)
EN 12178:2003
CEN
Refrigerating systems and heat pumps - Liquid level indicating
devices - Requirements, testing and marking
EN 12263:1998
CEN
Refrigerating systems and heat pumps - Safety switching
devices for limiting the pressure - Requirements and tests
EN 12266-1:2003
CEN
Industrial valves - Testing of valves - Part 1: Pressure tests,
test procedures and acceptance criteria - Mandatory
requirements
EN
10272:2000
Date expired
(30/04/2008)
Note 2.1
EN
10273:2000
Note 2.1
Date expired
(30/06/2008)
EN 12284:2003
CEN
CEN
Refrigerating systems and heat pumps - Valves Requirements, testing and marking
EN 12288:2003
Industrial valves - Copper alloy gate valves
EN 12334:2001
Industrial valves - Cast iron check valves
CEN
EN 12334:2001/A1:2004
Note 3
Date expired
(28/02/2005)
Note 3
Date expired
(31/05/2005)
EN 12334:2001/AC:2002
EN 12392:2000
CEN
CEN
Aluminium and aluminium alloys - Wrought products - Special
requirements for products intended for the production of
pressure equipment
EN 12420:1999
Copper and copper alloys - Forgings
EN 12434:2000
CEN
Cryogenic vessels - Cryogenic flexible hoses
EN 12434:2000/AC:2001
EN 12451:1999
CEN
Copper and copper alloys - Seamless, round tubes for heat
exchangers
EN 12452:1999
CEN
Copper and copper alloys - Rolled, finned, seamless tubes for
heat exchangers
EN 12516-1:2005
CEN
Industrial valves - Shell design strength - Part 1: Tabulation
method for steel valve shells
EN 12516-1:2005/AC:2007
EN 12516-2:2004
CEN
Industrial valves - Shell design strength - Part 2: Calculation
method for steel valve shells
EN 12516-3:2002
CEN
Valves - Shell design strength - Part 3: Experimental method
EN 12516-3:2002/AC:2003
EN 12516-4:2008
CEN
Industrial valves - Shell design strength - Part 4: Calculation
method for valve shells manufactured in metallic materials
other than steel
EN 12542:2002
CEN
Static welded steel cylindrical tanks, serially produced for the
storage of Liquefied Petroleum Gas (LPG) having a volume not
greater than 13m and for installation above ground - Design
and manufacture
EN 12542:2002/A1:2004
CEN
EN 12735-1:2001
Copper and copper alloys - Seamless, round copper tubes for
air conditioning and refrigeration - Part 1: Tubes for piping
systems
EN 12735-1:2001/A1:2005
Note 3
Date expired
(31/10/2005)
Note 3
Date expired
(31/10/2005)
Note 3
Date expired
(31/12/2005)
EN 12735-2:2001
CEN
Copper and copper alloys - Seamless, round copper tubes for
air conditioning and refrigeration - Part 2: Tubes for equipment
EN 12735-2:2001/A1:2005
EN 12778:2002
Cookware - Pressure cookers for domestic use
CEN
EN 12778:2002/A1:2005
EN 12778:2002/AC:2003
CEN
EN 12952-1:2001
Water-tube boilers and auxiliary installations - Part 1: General
EN 12952-2:2001
CEN
Water-tube boilers and auxiliary installations - Part 2: Materials
for pressure parts of boilers and accessories
EN 12952-3:2001
CEN
Water-tube boilers and auxilliary installations - Part 3: Design
and calculation for pressure parts
EN 12952-5:2001
CEN
Water-tube boilers and auxiliary installations - Part 5:
Workmanship and construction of pressure parts of the boiler
EN 12952-6:2002
CEN
Water-tube boilers and auxiliary installations - Part 6:
Inspection during construction; documentation and marking of
pressure parts of the boiler
EN 12952-7:2002
CEN
Water-tube boilers and auxiliary installations - Part 7:
Requirements for equipment for the boiler
EN 12952-8:2002
CEN
Water-tube boilers and auxiliary installations - Part 8:
Requirements for firing systems for liquid and gaseous fuels for
the boiler
EN 12952-9:2002
CEN
Water-tube boilers and auxiliary installations - Part 9:
Requirements for firing systems for pulverized solid fuels for the
boiler
EN 12952-10:2002
CEN
Water-tube boilers and auxiliary installations - Part 10:
Requirements for safeguards against excessive pressure
EN 12952-11:2007
CEN
Water-tube boilers and auxiliary installations - Part 11:
Requirements for limiting devices of the boiler and accessories
EN 12952-14:2004
CEN
Water-tube boilers and auxiliary installations - Part 14:
Requirements for flue gas DENOX-systems using liquefied
pressurized ammonia and ammonia water solution
EN 12952-16:2002
CEN
CEN
Water-tube boilers and auxiliary installations - Part 16:
Requirements for grate and fluidized-bed firing systems for
solid fuels for the boiler
EN 12953-1:2002
Shell boilers - Part 1: General
EN 12953-2:2002
CEN
CEN
Shell boilers - Part 2: Materials for pressure parts of boilers and
accessories
EN 12953-3:2002
Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-4:2002
CEN
Shell boilers - Part 4: Workmanship and construction of
pressure parts of the boiler
EN 12953-5:2002
CEN
CEN
Shell boilers - Part 5: Inspection during construction,
documentation and marking of pressure parts of the boiler
EN 12953-6:2002
Shell boilers - Part 6: Requirements for equipment for the boiler
EN 12953-7:2002
CEN
Shell boilers - Part 7 : Requirements for firing systems for liquid
and gaseous fuels for the boilers
EN 12953-8:2001
CEN
Shell boilers - Part 8: Requirements for safeguards against
excessive pressure
EN 12953-8:2001/AC:2002
EN 12953-9:2007
CEN
Shell boilers - Part 9: Requirements for limiting devices of the
boiler and accessories
EN 12953-12:2003
CEN
Shell boilers - Part 12: Requirements for grate firing systems for
solid fuels for the boiler
EN 13121-1:2003
CEN
GRP tanks and vessels for use above ground - Part 1: Raw
materials - Specification conditions and acceptance conditions
EN 13121-2:2003
CEN
GRP tanks and vessels for use above ground - Part 2:
Composite materials - Chemical resistance
EN 13121-3:2008
CEN
CEN
CEN
GRP tanks and vessels for use above ground - Part 3: Design
and workmanship
EN 13133:2000
Brazing - Brazer approval
EN 13134:2000
Brazing - Procedure approval
EN 13136:2001
CEN
Refrigerating systems and heat pumps - Pressure relief devices
and their associated piping - Methods for calculation
EN 13136:2001/A1:2005
Note 3
Date expired
(31/12/2005)
EN 13175:2003+A2:2007
CEN
LPG equipment and accessories - Specification and testing for
Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13348:2008
CEN
CEN
CEN
CEN
CEN
CEN
CEN
CEN
Copper and copper alloys - Seamless, round copper tubes for
medical gases or vacuum
Note 2.1
EN
13348:2001
Date expired
(28/02/2009)
Note 2.1
Cryogenic vessels - Couplings for cryogenic service
EN 13397:2001
Industrial valves - Diaphragm valves made of metallic materials
EN 13445-1:2009 (new)
Unfired pressure vessels - Part 1: General
EN 13445-2:2009 (new)
Unfired pressure vessels - Part 2: Materials
EN 13445-3:2009 (new)
Unfired pressure vessels - Part 3: Design
EN 13445-4:2009 (new)
Unfired pressure vessels - Part 4: Fabrication
EN 13445-5:2009 (new)
Unfired pressure vessels - Part 5: Inspection and testing
Unfired pressure vessels - Part 6: Requirements for the design
and fabrication of pressure vessels and pressure parts
constructed from spheroidal graphite cast iron
EN 13445-8:2009 (new)
CEN
Date expired
(30/09/2007)
EN 13371:2001
EN 13445-6:2009 (new)
CEN
EN
13175:2003
Unfired pressure vessels - Part 8: Additional requirements for
pressure vessels of aluminium and aluminium alloys
EN 134451:2002
31/12/2009
Note 2.1
EN 134452:2002
31/12/2009
Note 2.1
EN 134453:2002
31/12/2009
Note 2.1
EN 134454:2002
31/12/2009
Note 2.1
EN 134455:2002
31/12/2009
Note 2.1
EN 134456:2002
31/12/2009
Note 2.1
EN 134458:2006
31/12/2009
Note 2.1
EN 13458-1:2002
CEN
Cryogenic vessels - Static vacuum insulated vessels - Part 1:
Fundamental requirements
EN 13458-2:2002
CEN
Cryogenic vessels - Static vacuum insulated vessels - Part 2:
Design, fabrication, inspection and testing
EN 13458-2:2002/AC:2006
EN 13458-3:2003
CEN
Cryogenic vessels - Static vacuum insulated vessels - Part 3:
Operational requirements
EN 13458-3:2003/A1:2005
CEN
EN 13480-1:2002
Metallic industrial piping - Part 1: General
Note 3
Date expired
(31/12/2005)
CEN
EN 13480-1:2002/A1:2005
Note 3
Date expired
(31/12/2005)
EN 13480-1:2002/A2:2008
Note 3
Date expired
(30/11/2008)
EN 13480-3:2002/A1:2005
Note 3
Date expired
(28/02/2006)
EN 13480-3:2002/A2:2006
Note 3
Date expired
(31/05/2007)
EN 13480-3:2002/A3:2009
Note 3
31/07/2009
Note 3
Date expired
(30/06/2006)
EN 13480-2:2002
Metallic industrial piping - Part 2: Materials
EN 13480-3:2002
Metallic industrial piping - Part 3: Design and calculation
CEN
CEN
CEN
EN 13480-4:2002
Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-5:2002
Metallic industrial piping - Part 5: Inspection and testing
EN 13480-6:2004
CEN
Metallic industrial piping - Part 6: Additional requirements for
buried piping
EN 13480-6:2004/A1:2005
EN 13480-8:2007
CEN
Metallic industrial piping - Part 8: Additional requirements for
aluminium and aluminium alloy piping
EN 13611:2007
CEN
Safety and control devices for gas burners and gas burning
appliances - General requirements
EN 13648-1:2008
CEN
Cryogenic vessels - Safety devices for protection against
excessive pressure - Part 1: Safety valves for cryogenic service
EN 13648-2:2002
CEN
Cryogenic vessels - Safety devices for protection against
excessive pressure - Part 2: Bursting disc safety devices for
cryogenic service
EN 13648-3:2002
CEN
CEN
CEN
Cryogenic vessels - Safety devices for protection against
excessive pressure - Part 3: Determination of required
discharge - Capacity and sizing
EN 13709:2002
Industrial valves - Steel globe and globe stop and check valves
EN 13789:2002
Industrial valves - Cast iron globe valves
EN 13799:2002
CEN
Contents gauges for LPG tanks
EN 13799:2002/AC:2007
EN 136481:2002
Note 2.1
31/05/2009
EN 13831:2007
CEN
Closed expansion vessels with built in diaphragm for
installation in water
EN 13835:2002
Founding - Austenitic cast irons
CEN
EN 13835:2002/A1:2006
Note 3
Date expired
(31/12/2006)
Note 3
Date expired
(30/06/2005)
Note 3
Date expired
(28/02/2007)
Note 3
Date expired
(31/12/2005)
EN 13923:2005
CEN
CEN
Filament-wound FRP pressure vessels - Materials, design,
manufacturing and testing
EN 14071:2004
Pressure relief valves for LPG tanks - Ancillary equipment
EN 14075:2002
CEN
Static welded steel cylindrical tanks, serially produced for the
storage of Liquefied Petroleum Gas (LPG) having a volume not
greater than 13 m and for installation underground - Design
and manufacture
EN 14075:2002/A1:2004
CEN
EN 14129:2004
Pressure relief valves for LPG tanks
EN 14197-1:2003
CEN
Cryogenic vessels - Static non-vacuum insulated vessels - Part
1: Fundamental requirements
EN 14197-2:2003
Cryogenic vessels - Static non-vacuum insulated vessels - Part
2: Design, fabrication, inspection and testing
CEN
EN 14197-2:2003/A1:2006
EN 14197-2:2003/AC:2006
EN 14197-3:2004
Cryogenic vessels - Static non-vacuum insulated vessels - Part
3: Operational requirements
CEN
EN 14197-3:2004/A1:2005
EN 14197-3:2004/AC:2004
CEN
EN 14222:2003
Stainless steel shell boilers
EN 14276-1:2006
CEN
Pressure equipment for refrigerating systems and heat pumps Part 1: Vessels - General requirements
EN 14276-2:2007
CEN
CEN
CEN
Pressure equipment for refrigerating systems and heat pumps Part 2: Piping - General requirements
EN 14341:2006
Industrial valves - Steel check valves
EN 14359:2006
Gas-loaded accumulators for fluid power applications
EN 14382:2005+A1:2009
CEN
Safety devices for gas pressure regulating stations and
installations - Gas safety shut-off devices for inlet pressures up
to 100 bar
EN
14382:2005
30/09/2009
Note 2.1
EN 14382:2005+A1:2009/AC:2009
EN 14394:2005+A1:2008
CEN
Heating boilers - Heating boilers with forced draught burners Nominal heat output not exceeding 10 MW and maximum
operating temperature of 110 C
EN 14570:2005
Equipping of LPG tanks, overground and underground
CEN
EN 14570:2005/A1:2006
Note 3
Date expired
(31/08/2006)
Note 3
Date expired
(31/08/2008)
EN 14585-1:2006
CEN
CEN
Corrugated metal hose assemblies for pressure applications Part 1: Requirements
EN 14917:2009
Metal bellows expansion joints for pressure applications
EN 15001-1:2009 (new)
CEN
Gas Infrastructure - Gas installation pipework with an operating
pressure greater than 0,5 bar for industrial installations and
greater than 5 bar for industrial and non-industrial installations Part 1: Detailed functional requirements for design, materials,
construction, inspection and testing
EN ISO 15493:2003
CEN
Plastics piping systems for industrial applications - Acrylonitrilebutadiene-styrene (ABS), unplasticized poly(vinyl chloride)
(PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system - Metric series
(ISO 15493:2003)
EN ISO 15494:2003
CEN
Plastics piping systems for industrial applications - Polybutene
(PB), polyethylene (PE) and polypropylene (PP) Specifications for components and the system - Metric series
(ISO 15494:2003)
EN ISO 15613:2004
CEN
Specification and qualification of welding procedures for
metallic materials - Qualification based on pre-production
welding test (ISO 15613:2004)
EN ISO 15614-1:2004
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 1: Arc and
gas welding of steels and arc welding of nickel and nickel alloys
(ISO 15614-1:2004)
EN ISO 15614-1:2004/A1:2008
EN ISO 15614-2:2005
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 2: Arc welding
of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 15614-2:2005/AC:2009
CEN
EN ISO 15614-4:2005
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 4: Finishing
welding of aluminium castings (ISO 15614-4:2005)
EN ISO 15614-4:2005/AC:2007
EN ISO 15614-5:2004
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 5: Arc welding
of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN ISO 15614-6:2006
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 6: Arc and
gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 15614-7:2007
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 7: Overlay
welding (ISO 15614-7:2007)
EN ISO 15614-8:2002
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 8: Welding of
tubes to tube-plate joints (ISO 15614-8:2002)
EN ISO 15614-11:2002
CEN
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 11: Electron
and laser beam welding (ISO 15614-11:2002)
EN ISO 15620:2000
CEN
Welding - Friction welding of metallic materials (ISO
15620:2000)
EN ISO 16135:2006
CEN
Industrial valves - Ball valves of thermoplastics materials (ISO
16135:2006)
EN ISO 16136:2006
CEN
Industrial valves - Butterfly valves of thermoplastics materials
(ISO 16136:2006)
EN ISO 16137:2006
CEN
Industrial valves - Check valves of thermoplastics materials
(ISO 16137:2006)
EN ISO 16138:2006
CEN
Industrial valves - Diaphragm valves of thermoplastics
materials (ISO 16138:2006)
EN ISO 16139:2006
CEN
Industrial valves - Gate valves of thermoplastics materials (ISO
16139:2006)
EN ISO 21787:2006
CEN
Industrial valves - Globe valves of thermoplastics materials
(ISO 21787:2006)
(1) ESO: European Standardisation Organisation:
CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax +32 2 5500819 (http://www.cen.eu)
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax +32 2 5196919
(http://www.cenelec.org)
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716,
(http://www.etsi.eu)
Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (dow), set by
the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in
certain exceptional cases this can be otherwise.
Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated,
the superseded standard ceases to give presumption of conformity with the essential requirements of the
directive.
Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the
superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the
(partially) superseded standard ceases to give presumption of conformity with the essential requirements of the
directive for those products that fall within the scope of the new standard. Presumption of conformity with the
essential requirements of the directive for products that still fall within the scope of the (partially) superseded
standard, but that do not fall within the scope of the new standard, is unaffected.
Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any,
and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY
and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded
standard ceases to give presumption of conformity with the essential requirements of the directive.
