100% found this document useful (2 votes)

438 views105 pages

3DCreative Magazine Issue 077 January 2012

Uploaded by

Miroslav Resanovic

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

100% found this document useful (2 votes)

438 views105 pages

3DCreative Magazine Issue 077 January 2012

Uploaded by

Miroslav Resanovic

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 105

Issue 077 January 2012

Luis Antonio
3DCreative interview this
talented Art Director .

Guang Yang,
Insun Kwon & more!
Gallery - 10 of the best images from
around the world!

Sector 21
Project Overview by Rudolf Herczog

Bruno Camara starts off our brand new ZBrush tutorial

series with the creation of this armored lizard character .

Cyborgs

In this issue Andrzej Sykut will be looking at the human face and how to
add some sci-fi looking implants and glasses.

Sword Master 2

Gavin Goulden brings us the forth chapter of our Sword Master 2 series,
this time showing us how to unwrap our low poly games model .

Topology

Diego Maia continues his fantastic Topology series by showing us how to

organize and create limbs and accessories ready for animation.
Cover image by Bruno Camara

Contents
Editorial

Contents

Luis Antonio is a fantastically talented art director

who has worked for some of the biggest names in

Hello and welcome to the

Issue 077 January 2012

the business, including Rockstar and Ubisoft. In this

months interview Luis tells us how he has travelled

Whats in this month?

the world gathering inspiration from each new location

as he searches for new and exciting experiences in
the games industry, as well as sharing a little about his
future goal to turn games into an art form.

January issue of 3DCreative.

Luis Antonio

008

We hope you had a great

Interview - Art Director

Christmas and a memorable

Luis Antonio
3DCreative interview this
talented Art Director .

This month we feature:

Faraz Haider
Tamas Gyerman

018

New Year. I am sure you

Guang Yang,
Insun Kwon & more!
Gallery - 10 of the best images from
around the world!

Carlos Ortega
Christopher Brndstrm
Alex Novitskiy
Insun Kwon
Guang Yang
Rebeca Puebla

have been busy entertaining

Sector 21
Project Overview by Rudolf Herczog

Bruno Camara kick starts our brand new ZBrush tutorial

series with the creation of this armored lizard character .

delivering presents over the

Sword Master 2

festive season, so now its

Topology

time to kick back and relax

Andrzej Sykut will be showing us how to mix 3D with photography by

creating 3D mechanical parts and adding them to his photographs.

Gavin Goulden brings us the forth chapter of our Sword Master 2 tutorial
series, this time around Gavin shows us the unwrapping stage.
Diego Maia continues on from last issues introduction to Topology by
creating Limbs and Accessories in the second chapter of this four part series.
Cover image by Bruno Camara

10 of the Best 3D Artworks

James Jean-Pierre

relatives and rushing around

Cyborgs

The Gallery

Khadyko Vladimir

Cyborgs

034

Chapter 2: Sunglasses
042

Armored Beasts

The number of forums and websites

where artists around the world can
meet is just unbelievable
Rudolf Herczogs stunning image Sector
21 reminds us of some of the cool sci-fi
films of the 90s, and in this Making Of he

with the January issue.

Chapter 1: Lizard

tells us exactly how it was created. The

whole process Rudolf uses is fascinating,
but pay special attention to the mix of
texturing and post-production work,
which creates stunning results.

058

Mixing 3D and photography is a real skill and youve probably seen it attempted with varying results. In this series Andrzej

Sykut will be showing us how to achieve the perfect blend of 3D and photography with the coolest of subject: cyborgs. When

With all topics and skills there are core subjects that

approaching this task there is a lot to consider. Firstly you must think about the photograph and the lighting you want in your

This months issue is a real cracker, and we are really excited to

must be considered and understood in order to get

image, then you have to think about how you will create the 3D in the image, and once the
youbest
have
this you
willworking
need toincreate
results.
When
3D, one of those
the same lighting on the 3D aspect as in the photograph... the list goes on and on. Tackling
this without
direction
would Diego
be Maia will
is topology.
In this series
of tutorials
character, whilst explaining the intricacies and
of this fundamental subject.
December Issue 076 Chapter 01 | Human Hand | This Issueimportance
Chapter 02
| Sunglasses

Next Issue Chapter 03 | Power Plugs | March Issue 079 Chapter 04 | Spy Snail
December Issue 076

be able to announce a new ZBrush series. Monsters and organic

Chapter 01 | An Introduction to Topology

This Issue

066

creatures are always popular with ZBrush users, but at times it

Sector 21

Chapter 02 | Limbs and Accessories

Next Issue
Chapter 03 | Cleaning up and Adjustments

March Issue 079

Project Overview by Rudolf Herczog

Chapter 04 | Hard Surfaces

can be hard to add non-organic features to sculpts. In this new

With the release of 3DTotals new book,

Free Chapter

Digital Art Masters: Volume 6, we have

074

series our artists will be taking an animal and will show us how to

some exclusive chapters for you...

ZBrush is a formidable piece of software that is capable of so much. The possibilities are endless and

This
is more
than just
an artwork
the only restriction is your imagination. In this series our artists will be flexing
their
creative
muscles
to book.
Not only

does it feature full-color, fullshow us how to not only create the organic forms of their beasts but also the non organic
forms that

page images, but each artist has given a

make up their armor and weaponry. In this series our artists will cover everything from concept through

detailed description, in their own words,

Digital Art Masters: Volume 6 - Marek Denko

to final illustration and will show us how to create some mind blowing
armored
of the
creation beasts!
process behind each piece

turn it into a ferocious armored beast and how to add armor to it.

This Issue Chapter 01 | Lizard

Next Issue Chapter 02 | Chicken

April Issue 080 Chapter 04 | Rhino

of published artwork. And theyve done it

March Issue 079 Chapter 03 | Bear

May Issue 081 Chapter 05 | Cat

especially for this book!

June Issue 082 Chapter 06 | Gorilla

This month we feature:

In the first installment of this stunning series Bruno Camara will be

Everything
Beautiful Is
Far Away

078

showing us in great detail how he created his Armored lizard.

Swordmaster 2

by Marek Denko

Chapter 4: Unwrapping

Chapter 4- Unwrapping

About us

In 2006 3DTotal created some groundbreaking

105

training that quickly made a name for itself as

I hope you have all been enjoying following Gavin Gouldens steps

Topology

Chapter 2: Limbs and Accessories

difficult, but with the help of these tutorials you can come up with some
be stunning
talking us results.
through the creation of his interesting

one of the best 3D training resources available;

that series was called the Swordmaster! Well
five years later the Swordmaster is back

3DTotal.com Ltd Information & Contacts

2011 3DTotal.com. Published by 3DTotal Publishing. All rights reserved.

in his fantastic Swordmaster series. In this issue Gavin will be

and better than ever. In this series industry

professional Gavin Goulden will be talking you
through how to take a concept and turn it into a
top quality character ready for use in a game.

showing us how to unwrap our low poly games model in a clean

From basic modeling through to sculpting and

texturing, Gavin will cover every step in great

Copyright 1999-2011 3DTotal.com Ltd. All Rights reserved

detail so that even an inexperienced 3D artist

and efficient fashion. We will soon be getting to the exciting part

will be able to comfortably follow this series.

where we can see the stunning full color results.

All products and websites created/published by 3DTotal.com Ltd including www.3dtotal.com,

www.3dcreativemag.com, www.2dartistmag.com all physical books, ebooks, emags, video content, texture
libraries and any future releases may not be reproduced in any form or by any means, without the prior

We kicked of Andrzej Sykuts new series about using photos to

create images of Cyborgs last month and hope you all enjoyed

written consent of the publisher.

Chapter 1 | October Issue 074

Base model

Chapter 2 | November Issue 075

Sculpting

learning this interesting technique which is new to our magazine.

Chapter 3 | December Issue 076

Low Poly Model

Chapter 4 | This Issue

In this issue we will be looking at the human face and how to add

Editor

Layout

Content

Proofing

Simon Morse

Matt Lewis
Layla Khani
Az Pishneshin

Simon Morse
Tom Greenway
Richard Tilbury
Chris Perrins

Jo Hargreaves

Unwrapping

Chapter 5 | Next Issue

Texturing

some sci-fi looking implants and glasses. This is a fascinating

Chapter 6 | March Issue 079

Rendering

tutorial, and demonstrates a really interesting technique for

Lead Designer

Chris Perrins

creating geometry to help you create your base head to work

from.
Understanding and mastering topology is obviously no easy task,

Marketing

Tom Helme

Free Stuff!
Wherever you see this symbol, click it to
download resources, extras & even movies!

however as always we are here to help and in this issue Diego

Maia will continue his fantastic Topology series by showing us

We also have a great Making of in this issue and some stunning gallery images.

how to organize and create limbs and accessories ready for

Rudolf Herczog shows us how he created his amazing Sci-Fi image Sector 21,

animation.

and the gallery contains art work from some of the industrys most talented artists
including Christopher Brndstrm, Rebeca Puebla, James Jean-Pierre and Carlos

Many of you will be familiar with the work of Art Director Luis

Ortega.

Antonio. Luis has held a host of positions in the games industry

and has travelled the world moving from one major games
company to another. In this interview Luis tells us how he draws
inspiration from each new destination he travels to and how one
day he would like to turn games into an art form.

www.3dcreativemag.com

page 2

Issue 077 January 2012

Get the most out of your

Magazine!

Issue 077 January 2012

If youre having problems viewing the double-page spreads that we

feature in this magazine, follow this handy little guide on how to set
up your PDF reader!

Luis Antonio
3DCreative interview this
talented Art Director .

Guang Yang,
Insun Kwon & more!
Gallery - 10 of the best images from
around the world!

Sector 21
Project Overview by Rudolf Herczog

Bruno Camara kick starts our brand new ZBrush tutorial

series with the creation of this armored lizard character .

Cyborgs

Andrzej Sykut will be showing us how to mix 3D with photography by

creating 3D mechanical parts and adding them to his photographs.

Sword Master 2

Gavin Goulden brings us the forth chapter of our Sword Master 2 tutorial
series, this time around Gavin shows us the unwrapping stage.

Topology

Diego Maia continues on from last issues introduction to Topology by

creating Limbs and Accessories in the second chapter of this four part series.
Cover image by Bruno Camara

Setting up your PDF reader

For optimum viewing of the magazine, it is recommended that you
have the latest Acrobat Reader installed. You can download it for free,
here: DOWNLOAD!
To view the many double-page spreads featured in 3DCreative
magazine, you can set the reader to display two-up, which will show
double-page spreads as one large landscape image:
1. Open the magazine in Reader;

View menu, then Page display;

Two-up Continuous, making sure that
Show Cover Page is also selected.
2. Go to the
3. Select

Thats it!

www.3dcreativemag.com

page 3

Issue 077 January 2012

Contributors

Contributing artists

Gavin

Every month artists from around the world contribute to 3DCreative, and

Gavin Goulden is a

you can find out a little more about them right here! If youd like to get
involved in the 3DCreative magazine, please contact: [email protected]

Goulden
character artist for
Irrational Games
working on Bioshock
Infinite. With 6 years
games industry
experience, he has contributed character and
environment art assets to multiple titles including
Dead Rising 2, The Bigs 2, Damnation and
FEAR 2.
http://www.gavimage.com/
[email protected]

Andrzej

Bruno

Sykut

Cmara

When it comes to

Bruno Cmara is a

CG, Andrzej is a bit

Brazilian artist that

of a generalist, but

has been working

lighting is where the

in the CG industry

fun is for him that,

for 6 years as a 3D

and post-production/

generalist. He has

compositing. He currently works at Platige

a degree in Computer Science but his true

Image, and also does some freelancing as

passion is character creation. Bruno has worked

well. While he enjoys his work, its also time-

for major TV Ad companies but he is now

consuming, so he tries to get away from the

becoming a freelance character artist.

computer as often as possible to enjoy the

http://bruno-camara.blogspot.com

world. http://azazel.carbonmade.com/

[email protected]

Diego

Rudolf

Maia

Herczog

Diego Maia is a

Rudolf Herczog is a

freelance 3D modeler

self taught digital artist

and concept designer

from Sweden who

from Brazil. He has

currently works as a

worked for some of

freelancer. He has a

the biggest advertising

passion for sci-fi and

companies in Brazil, and has also been teaching

old contemporary architecture, and is always

drawing classes at Melies School for three

looking for a new way to combine these. He has

years.

recently become interested in matte painting so

http://maia3d.blogspot.com/

is working on developing his skills in that area.

[email protected]

http://www.rochr.com
[email protected]

www.3dcreativemag.com

page 4

Issue 077 January 2012

WATCHED A BLOCKBUSTER IN 2011?

9 OF THE 10 HIGHEST-GROSSING MOVIES OF LAST YEAR FEATURED
THE WORK OF VFS ANIMATION & VISUAL EFFECTS GRADS.
CLEMENT YIP

RISE OF THE PLANET

OF THE APES

ANIMATOR

JOZEF VAN EENBERGEN

KRISTIN SEDORE

LIGHTING TD
SENIOR LIGHTER

KEVIN MAH
TAMIR DIAB

PIPELINE DEVELOPER
PIPELINE DEVELOPER

EFFECTS TECHNICAL DIRECTOR

LIGHTING TECHNICAL DIRECTOR

PEDRAM DARAEIZADEH
WILL TOWLE

DIGITAL PRODUCTION ADMINISTRATOR

VISUAL EFFECTS COORDINATOR

CAMERA TRACKER
CAMERA TRACKER

SERGUEI KALENTCHOUK
HENRY SOUTH

JOSHUA HERRIG
VISUAL EFFECTS COORDINATOR
VISUAL EFFECTS COORDINATOR

LEAD LIGHTING ARTIST/LOOK DEV ARTIST

DIGITAL COMPOSITOR

DAVID YABU

LEAD ANIMATOR

DAPHNE DE JESUS

DIGITAL PAINT ARTIST

DIGITAL PAINT & ROTO ARTIST
DIGITAL PAINT ARTIST
STEREOSCOPIC PREP/ROTO ARTIST
STEREOSCOPIC PREP/ROTO ARTIST

CESAR RODRIGUEZ BAUTISTA

ANNA TONRUNGROJ

STEREOSCOPIC NUKE BACKGROUND PREP

ROTO & PAINT ARTIST

TRANSFORMERS:
DARK OF THE MOON

JAMIE BOWERS

VISUAL EFFECTS ARTIST

LOUIS COX
ANTHONY DI NINNO

MATCHMOVE TD

HENRI TAN

CREATURE TECHNICAL DIRECTOR

KELSEY AYUKAWA

STEREO ROTO/PAINT ARTIST

ANIMATOR
PREVIS ARTIST

HENRY PENG

THOR

ANGEL VILLASENOR

ROTOSCOPE ARTIST

JAMES MCPHAIL

EFFECTS TECHNICAL DIRECTOR

ABDULLAH ECIRLI

DIGITAL COMPOSITOR

JELMER BOSKMA
SCOTT JONES

CHARACTER MODELER

STEREO COMPOSITOR

TEH-WEI YEH
YUTA SHIMIZU

ROTO/PAINT ARTIST

NUNO NISA PEREIRA

VISUAL EFFECTS TECHNICAL DIRECTOR

KIERAN TETHER

DIGITAL ARTIST
DIGITAL ARTIST

PIPELINE TECHNICAL DIRECTOR

BRIAN ZHENG

MODELLING ARTIST

ANIMATOR

JOOYONG LEE
JUSTINE CODRON

ROTO/PAINT ARTIST

LIGHTING ARTIST/TD

BILL WATRAL
SHAUN ROTH

DIGITAL COMPOSITOR

EFFECTS ARTIST

VISUAL EFFECTS ARTIST

FAST FIVE

LIGHTING TECHNICAL DIRECTOR

ANIMATOR

JULIEN STUART-SMITH

SAMSON WONG

MATCHMOVE ARTIST

SARA HILMARSDOTTIR

ADAM MARISETT
COMPOSITOR

CAPTAIN AMERICA:
THE FIRST AVENGER
CARS 2

LIGHTING AND ASSET TD

RICHARD SUR

HYUN CHUL JUNG

INTEGRATION ARTIST
INTEGRATION ARTIST

TWILIGHT: BREAKING
DAWN - PART 1

GEETA BASANTANI

CAROLYN WONG

CREATURE TECHNICAL DIRECTOR

ANIMATOR

CHELSEA WHITTET

REX FANG

ALAN FREGTMAN

RIGGER

LIGHTING LEAD

DIGITAL PRODUCTION ADMINISTRATOR

BORAE CHO

PIRATES OF THE
CARIBBEAN: ON
STRANGER TIDES

MIKE RHONE

EFFECTS TECHNICAL DIRECTOR

TEXTURE ARTIST
RIGGING LEAD

CG MODELER
CG MODELER

CHUN-PING CHAO

HARRY POTTER
& THE DEATHLY
HALLOWS PART 2

SOFUS GRAAE

VISUAL EFFECTS COORDINATOR

DAANISH WAIN

BIREN VENKATRAMAN
ANIMATOR

ANIMATOR

STEPHEN KING

MATT WEAVER
DIGITAL PAINTER

2D ARTIST

SHERRIE LAW

VINAY MEHTA

VFS CONNECTS THE ENTERTAINMENT INDUSTRY.

Luis Antonio is a fantastically talented art director

who has worked for some of the biggest names in
the business, including Rockstar and Ubisoft. In this
months interview Luis tells us how he has travelled
the world gathering inspiration from each new location
as he searches for new and exciting experiences in
the games industry, as well as sharing a little about his
future goal to turn games into an art form.

The number of forums and websites

where artists around the world can
meet is just unbelievable

Luis Antonio Interview

Hi Luis can you tell us about the real you?
What were you were like growing up and
how did you end up working in the CG
industry?
For as far back as I can remember I drew. At
home, on vacation, at school during classes. All
my books are filled with drawings everywhere.
I knew inside that this was what I wanted to do
all the time, and thanks to some really good
teachers in high school I came to realize that
this was possible.
The moment it clicked was in my first year of
university. I joined an agency and they started to
give me different freelance jobs for newspapers,
magazines and sometimes TV shows and I
loved it. The deadlines were super aggressive,
but seeing my work in the Saturday newspapers
or in a double page spread would feel so good,
and at the same time I was able to understand
what it was like working in a professional
environment. I was hooked!
Halfway through my studies I found the world
of 3D. I knew I had to make a decision as to
what my next move would be. With that in mind
I began learning 3ds Max, so by the end of

www.3dcreativemag.com

my degree I had a strong illustrative and 3D

Have you had to sacrifice much for art such

portfolio. I knew I wanted to go into movies

as where you live etc?

or video games, and that Portugal was not

I dont think so quite the contrary. I never felt

developed enough in those areas so I needed

it was possible to grow so much in so little time,

to find another place to do this. The United

and the fact that I moved so much has made

Kingdom was the closest country that was

me aware of what is really important and taught

suitable and I was good at English so I started

me to not be attached to the material things.

applying to studios that I liked the look of until I

We live in great times where Facebook, Skype

got a reply back from Rockstar Games inviting

and technology allows us to keep in touch with

me for an interview.

people we love and no one is ever that far away.

page 9

Issue 077 January 2012

Interview

Luis Antonio

I also have to say that I feed on going into a

new country, coming across new cultures and
new ways of being you learn so much. The
things I have seen and experienced in different
countries has been really inspiring. Oh, and
every weekend is like Im on vacation since its a
different country.
Besides your foreign travels, where else
do you look for inspiration and how does it
influence you?
The way I see it is that the internet has
revolutionized the way we inspire ourselves
as artists. The number of forums and websites
where artists around the world can meet is just
unbelievable and you can actually talk with
some of the great masters that have worked on
things that inspired you as you grew up.

Over the years I have found my favorite spots

to do their work and make sure they are on the

on the web where people I admire and learn

right track. After lunch I end up doing more of a

from provide constant sources of inspiration.

one to one with specific artists focused on close

The more you give the art community, the more

milestones and what they have to deliver. I try to

they give you back; its really beautiful. If I see

give as much support as possible with mock-

a shot in a movie that I like, within a couple of

ups, ideas and inspiration to make sure they can

hours I can follow the director of photography,

give the best they have.

understand where he came from, what he did,

www.3dcreativemag.com

other movies he worked on and what inspired

The end of the day is usually more relaxed,

him. Nowadays for me the problem is more

where I try to make sure we all share the cool

about having the time to actually see/observe

stuff that was done and get some feedback/

this whole gigantic backlog of inspiration and art

critics from everyone so we are all challenged

that the community provides on a daily basis.

and inspired for the next day.

Can you lead us through a typical day for

Has it ever been difficult to translate an

you as an art director?

artistic idea into a project due to tools and/or

The day always starts with a daily meeting

pipeline limitations? If so, how did you come

where the whole art team gathers together and

up with the solution?

we go over the overall plans for the week and

Yes! And I think that the gaming industry,

what we are aiming to do that day. After that Ill

due to the hardware limitations and constant

usually go over to the rest of the development

technological evolution, is always struggling with

team, designers, programmers and producers

that. Personally my biggest issue is not being

and get all the information needed for the artists

aware of the skills and strengths of your team

page 10

Issue 077 January 2012

Luis Antonio Interview

and forcing them to do something they are not
strong at. As an example, imagine getting a
really strong character artist to create a 2D flash
user interface. It wont make them happy and
the work they will do wont match their skills.
The best solution I have found so far is to listen
and truly understand the passion and what
drives every single artist. We are a team and
we are working together at least eight hours a
day! We need to understand each other and
see what makes every one of us tick. There are
moments where you just dont have a choice
and the nature of the project forces you to do
things you dont love, but there is always a little
something you can find that will make you enjoy
your day and be creative.
How often do you try to step out of your
comfort zone and try something new? Would
you define that as a key to success?
I dont think there is a key to success; its like a
producer asking his team to do a 95%+ game.
If your aim is to do what you love then you will
naturally be successful, at least with yourself
(I guess thats the key). I always try to leave
my comfort zone and expand my skills and

knowledge. Its hard and I think we naturally

had a chance to mentor some students (they

try to get back to it, and in a way travelling and

have a program for internships for students to

being in a new place really helps to keep it new

participate in game development) and I really

and fresh. I would say its important to have our

liked it. Right now work is too busy and I hope

roots, the people we love and the little things

once there is more time that I can do it again. As

that keep us inspired and once you find those

for tutorials, Ive received really good feedback

you can kind of move all the other ones around.

on what Ive done so far. I have some other

ideas in preparation, but its too early to talk

I noticed the excellent and detailed tutorials

about them, just stay tuned

on your web page. Do you have any

www.3dcreativemag.com

thoughts of turning them into a book and/or

From pencil drawing to ZBrush sculpts, your

taking a teaching role?

work portrays personal stylized characters.

When I was in university I wished there was

Did it take years to develop?

a teacher that could give classes on 3D art,

Thats a hard question. I would say that my style

but at the time in Portugal there was no such

is naturally evolving and has grown from what

course so I had to learn everything by myself.

it was a few years ago. When I look back I see

Ive always wanted to go back and give others

a huge evolution, but when I look at where I am

the opportunity I never had. While at Ubisoft I

now I still feel I have tons to learn.

page 11

Issue 077 January 2012

Interview

Luis Antonio

What drives your personal and work

the phases of a project and even though I look

will try to work on something realistic at home.

projects? Is it the new beginnings, work

forward to the finished artwork its the day to

Or sometimes Ill just focus on learning some

phases, finished artwork or the game play

day process that is the most fun. Ive noticed in

new tools and trying to leave my contort zone.

itself?

the last few years that the games I have more

I try to guide my professional work by the

pleasure working on often dont end up being

Did you ever change your entire focus

essence of the gameplay of whatever game

the best ones.

towards the end of a project and start

from scratch? What did you take from that

Im working on and let it dictate the visual. Its

easy to get distracted and make it personal or

As for personal projects, I usually use my free

experience?

just to do what you feel is cool and start to lose

time to do what is not possible at work. If Im

That is a really good question since it happened

focus on what is actually important. I like all

currently doing something extremely stylized I

recently. When I started to work in games I

www.3dcreativemag.com

page 14

Issue 077 January 2012

Luis Antonio Interview

would be very attached to everything and would

they deserve to be. Ive had a chance to work on

been a month since I joined him in the creation

be very frustrated if I had to change it or if it

triple A games with Rockstar and to lead a team

of his new game The Witness and Ill be moving

ended up not being used. After a few projects

at Ubisoft. Both experiences were amazing and

to San Francisco by the end of year! Its a big

I started to see the overall picture and how it

I grew a lot, but felt something was missing.

change from a studio of 300+ people to about

wasnt my personal work, but a team effort.

4 or 5. Im hoping this experience will allow me

The current economic climate is forcing the

to do something more meaningful as a game

On my last project we got away from that overall

big companies to be money driven and forget

developer and at the same time grow further as

picture and had to re-design the art direction

what games are about (or maybe it was always

an artist.

from the ground up. It was a really big ask

their nature and I only just noticed it). I think

for the artists and producers since we were

every game developer has the responsibility to

Thank you for answering all of our questions

supposed to already be in production, but in the

make good games. Games that actually have

and good luck for the future!

end everyone was really happy with the results.

something to say and arent just fast food or

Thank you for the opportunity to share my

I learned that it is important to always keep in

another sequel with no new gameplay evolution.

thoughts as an artist. I think you guys are doing

the back of your mind what the real objectives

I need to be part of an environment like this and

an amazing job and helping to make the 3D

of your project are. You can even write it in big

see if its actually possible to do something that

artist community grow in the right direction.

letters on a whiteboard and whenever you start

will give gamers something deeper than just

to stray, just look at it and make sure you get

entertainment.

Luis Antonio

back on track.
Do you have any big future projects lined up

For more from this artist visit:

You must always have the next step in mind

or any more moves on the horizon?

http://artofluis.com/

where do you see yourself over the next

Yes! Ive just had the opportunity to work with

Or contact him at:

few years?

someone I greatly admire: Jonathan Blow. He is

[email protected]

I want to elevate games to the art form I believe

a very good designer and games developer. Its

Interviewed by: Predrag Suka

www.3dcreativemag.com

page 15

Issue 077 January 2012

This month we feature:

Faraz Haider
Tamas Gyerman
Khadyko Vladimir
Carlos Ortega
Christopher Brndstrm
Alex Novitskiy
Insun Kwon
Guang Yang
Rebeca Puebla
James Jean-Pierre

The Gallery 10 of the Best

send us your images! | [email protected]

Star Trek Character

Christopher Brndstrm
http://www.badrobots.se
[email protected]
(Right)

Lantern
Khadyko Vladimir
[email protected]
(Left)

www.3dcreativemag.com

page 19

Issue 077 January 2012

Opel Kapitan 1938

Alex Novitskiy
http://arttalk.ru/profile/Tigerfather
[email protected]

send us your images! | [email protected]

10 of the Best

The Gallery

Broken Marionette
Rebeca Puebla
http://rebecapuebla.com
[email protected]

www.3dcreativemag.com

page 22

Issue 077 January 2012

The Night Chicago Died

Carlos Ortega
http://www.zigrafus.com.mx/
[email protected]

MNU Soldier
James Jean-Pierre
http://www.jjp3d.com
[email protected]

Predator
Insun Kwon
http://insunkwon.com
[email protected]

Rallypoint - Outer Rim

Tamas Gyerman
http://wmelone.com/cinemorx
[email protected]

send us your images! | [email protected]

10 of the Best

The Gallery

Office Farhan
Faraz haider
[email protected]

www.3dcreativemag.com

page 30

Issue 077 January 2012

Fight in the dark

Guang Yang
[email protected]

modo image by Teodoru Badiu www.theodoru.com

Meet modo.

Chapter 4 - Unwrapping
In 2006 3DTotal created some groundbreaking
training that quickly made a name for itself as
one of the best 3D training resources available;
that series was called the Swordmaster! Well
five years later the Swordmaster is back
and better than ever. In this series industry
professional Gavin Goulden will be talking you
through how to take a concept and turn it into a
top quality character ready for use in a game.
From basic modeling through to sculpting and
texturing, Gavin will cover every step in great
detail so that even an inexperienced 3D artist
will be able to comfortably follow this series.

Coming up in this issue...

This month Gavin Goulden will be sharing with
us the unwrapping stage.
So if youre interested in seeing the forth
chapter of this great series, please flip to the
back of this magazine and enjoy.

3ds max - Page 078

Maya - Page 092

Mixing 3D and photography is a real skill and youve probably seen it attempted with varying results. In this series Andrzej
Sykut will be showing us how to achieve the perfect blend of 3D and photography with the coolest of subject: cyborgs. When
approaching this task there is a lot to consider. Firstly you must think about the photograph and the lighting you want in your
image, then you have to think about how you will create the 3D in the image, and once you have this you will need to create
the same lighting on the 3D aspect as in the photograph... the list goes on and on. Tackling this without direction would be
difficult, but with the help of these tutorials you can come up with some stunning results.

Cyborgs Chapter 02 | Sunglasses

Chapter 02 - Sunglasses
Software used: 3ds Max

Introduction
For this tutorial I wanted to try a workflow that
only recently became possible. The task was to
add a mechanical element to a photographed
face. This can be approached in many ways, but
all these ways have one thing in common: you
have to match the camera and geometry. This is
a hard thing to do and usually takes a lot of time.
But does it have to? I think not.
Here is my idea. While shooting the base plate
for the project, why not shoot a few more snaps,
every 5-10 degrees around the head and feed
them to the Autodesk Photo Scene Editor. If we
do this, magic happens. We get a 3D model of
the face with textures derived from the photos,
and whats most awesome is that we get
properly positioned and matched cameras for
each snapshot, which means the whole job just
became much, much easier to do. So lets take
a look through the steps I used to achieve the
final result.

Concept Phase
Since cyborg faces have been done to death
I decided to try something not too glamorous,
but maybe more usable in real life. Hence the
glasses, as they present their own challenges
due to refractions. Glasses do not make a
cyborg, but some implants do. I struggled to

degree increments. We also did the same

workflow I described initially should help you

come up with a decent looking idea for the

from slightly higher and lower heights for more

avoid these problems, but it is not guaranteed to

implants, but in the end I think they turned out

coverage. The trick for the model is not to

work in every situation. If you are working with

okay.

blink or move; the photographer can blink all

shiny, reflective items you are out of luck; the

he wants! If you find photos where you have

software doesnt really work with surfaces like

blinked afterward, just delete them. Thats why

that.

Shoot
I asked my brother to shoot the images of my

its good to capture a lot of photos, in case some

face. We used a long lens to create a nice blur

are not usable (Fig.01).

in the background. We also used a big piece of

Another thing worth capturing is a HDRI

environment. I did it the rough and dirty way,

almost white styrofoam to serve as a reflector to

Those additional photos are essential for 3D

using four fisheye snaps with bracketing that I

fill in the shadows a bit.

reconstruction of the face and camera position.

quickly stitched together manually in Photoshop.

Capturing them only takes a few minutes, but it

Its nowhere near perfect, but it will do the job. I

As well as the main plate we shot more photos,

saves you hours of camera matching and even

also prepared a diffusely convoluted version for

moving the camera around my face in 5-15

more hours of modeling the subjects face. The

lighting purposes (Fig.02).

www.3dcreativemag.com

page 35

Issue 077 January 2012

Chapter 02 | Sunglasses Cyborgs

Reconstruction

exactly the same all the time, even if you were

direct light. I used a V-Ray Sun placed to match

This part is simple. Open the software and

trying not to blink. All the little inconsistencies

the position from the photo. It acts as a nice rim

upload the photos to the Autodesk Photo Scene

result in a blurred area where the eyes are

light. I also added a big area light to simulate

Editor. Once the mesh is created, inspect the

supposed to be. The camera map solves the

my styrofoam reflector and one more from the

low res mesh. If you wait a little longer it will

problem easily. The face uses a 100% self-

top, just to accentuate the up-facing parts of

create a high res mesh as well, which should be

illuminated material, and serves mostly to

the glasses. I also added one more rim light

exported as a FBX file (Fig.03). Simple, isnt it?

provide refractions, reflections and shadows, as

(Fig.04). The lights you choose will all depend

well as some GI. In V-Ray the properties will be

on the photo you started with.

After importing the FBX into 3ds Max, rotate the

whole scene so the face is orientated properly.

set to Matte Object and the Alpha to -1.0.

Modeling

careful though as it destroys UVs ProOptimize

Lighting/Reflection
and Environment
Reconstruction

may be a better choice) and clean it up a bit,

This part took a lot more manual work. I used

straightforward job. One thing worth noting is

removing unseen parts. Find your plate and

50% gray and glassy spheres as a visual aid

the way I created the glass piece. I made a

use it to camera map the plate photo onto

and tried to roughly match the light positions and

plane with a lot of divisions, drew the shape of

the geometry. You may ask, why not use the

HDRI intensities. Simply slapping the HDRI into

the lens using a Spline and used Shape Merge

reconstructed UV textures? This would work in

an environment map slot wont do. Use a V-Ray

to cut the plane to shape. Then I removed the

some cases, but not in this one. The reason is

HDRI instead of a 3ds Max default bitmap; this

outer polygons, did some cleaning up (Shape

resolution and averaging. A 4K camera map will

works much better. The most important part is

Merge is messy; it leaves a lot of vertices that

give sharper details than a 4K UV texture. That

to type in the proper horizontal rotation. This is

can cause problems later) and used two Bend

4K texture is averaged from all those photos,

so the map is oriented correctly in relation to

modifiers to give the lens a proper shape. I also

which results in loss of detail. Its not a big deal

the face model. This is not an exact science,

used a Shell modifier to add some thickness.

except for on the eyes. Its hard to keep the eyes

so do it by eye, and to make it easier display

The rest of the glasses consist of simple box-

the environment in the viewport. Do that for

modeled shapes.

This is mainly for convenience. Since the mesh

is very dense, use the Optimize modifier (be

This phase is pretty quick. I based the design

of the glasses on some modern sports eye
wear and since they are simple it was a pretty

both the reflection (the high resolution map)

and illumination (diffusely convoluted, blurred-

The implants were tricky. The basic mechanical

looking one). Then put them into the appropriate

shapes were done in Wings 3D and placed

override slots in the V-Ray render settings. I

in 3ds Max. The area immediately around the

played with the multiplier parameters right until

implants had to be altered as well. I exported

final render, but these were all small tweaks.

a piece of the head geometry to ZBrush and

modeled some scarring, bruising, and generally

www.3dcreativemag.com

HDRIs will provide the fill/environment lighting,

mangled the skin a bit. I also used ZBrush for

but the sunlight needs to be simulated by a

some basic texture layouts (Fig.05).

page 36

Issue 077 January 2012

Cyborgs Chapter 02 | Sunglasses

Shading
Since I didnt want the glasses to be perfectly
clear, I prepared some dirty maps with
fingerprints and all and used them in various
channels of the shaders (Reflection Glossiness,
Refraction Glossiness) and as a mask for
another layer on top of everything. The glass
itself uses Fog to tint it slightly. The nose
piece is just a transparent material with lots
of refraction glossiness and the side pieces
so they are not too transparent. Its all pretty

Rendering and
Compositing

simple, but took some time to get right.

I rendered the glasses and the implants

are similar, but less glossy. They too use Fog,

separately as they were added in slightly

The implants used a metal and carbon fiber

different ways. As usual I rendered a Beauty

shadow is not by multiplying it, but using it as a

shader, plus some V-RayDirt here and there.

pass and a few V-Ray passes (of which I only

mask for curves and color correction. Multiplying

The flesh around the implants is a bit more

used the V-Ray Wire Color as a selection mask

it will produce horrible effects.

interesting. I used a VrayFastSSS2 shader

and the V-Ray Total Lighting to tweak the side-

with the Pink Skin preset, with custom textures

pieces a bit) plus a Shadow and AO pass. Both

The AO was approached differently. I rendered

for SSS color and bump (Fig.06). To add

deserve some attention.

the AO viewed through the glasses to be

some detail to the flesh I used the Render

composited on top of everything. Again, this was

Surface Map function and rendered Dust and

I rendered a black and white mask for the

Cavity maps. I also altered the scatter radius

shadow of the glasses on the face and applied

a bit, since the reconstructed scene is scaled

it to the plate before rendering the final images,

Both passes were only used for the glasses and

differently from the real world. Actually, it was

so the shadow was taken into account when

needed some cleaning up in Photoshop as the

quite easy to match the skin to the photo.

creating refractions. The way to apply the

3D geometry from the Autodesk Photo Scene

to be used as a mask for color corrections.

Editor is somewhat messy in places (Fig.07).

Facial hair proved troublesome when
compositing the implants. I had to remove a
lot of hairs from underneath the 3D section.
Fortunately the Spot Healing brush and the
Healing brush tools in Photoshop made this part
easy.
I usually render my images with Exponential
color mapping, but this time I used Linear
Multiply to preserve the real colors and
brightness from the photo materials. It meant I
had to be careful with light intensities (it is easy
to get overblown whites), but it saved me a lot of
color correction later on.
Compositing wasnt especially complex. There
was a bit of masking, some color corrections,
some blurring and adding some noise etc. The

www.3dcreativemag.com

page 37

Issue 077 January 2012

rendered images fit quite well even before any

alterations, especially on the flesh part. The
implants needed to be brightened a bit to match
the black levels. They also needed some handdrawn soft masks so they blended well with the
real skin (Fig.08).
Finally there were some overall enhancements
like color correction, vignette, glows, that kind
of thing. All of this was done in After Effects
(Fig.09).

Andrzej Sykut
For more from this artist visit:
http://azazel.carbonmade.com/
Or contact him at:
[email protected]

New Books and Videos for your 3D toolkit

FROM THE PUBLISHER OF DIGITAL ART MASTERS VOL. 2, 3, 4, 5
AND DIGITAL PAINTING TECHNIQUES VOL. 1!

Video tutorials with over

100 minutes of instruction
from Andrew Gahan
in each set!

Visit www.focalpress.com/animation to view our entire selection of

3D and animation titles or sign-up for the focal animation e-newsletter
that includes free content, discounts, free book drawings and more!

Creativity has an endless shelf life.

Focal Press books are available wherever fine books are sold
or through your preferred online retailer.

focalpress.com

ZBrush is a formidable piece of software that is capable of so much. The possibilities are endless and
the only restriction is your imagination. In this series our artists will be flexing their creative muscles to
show us how to create not only the organic forms of their beasts, but also the non-organic forms that
make up their armor and weaponry. Follow the creation process from initial concept through to final
illustration and find out how to create some mind-blowing armored beasts!
This Issue Chapter 01 | Lizard

Next Issue Chapter 02 | Chicken

April Issue 080 Chapter 04 | Rhino

May Issue 081 Chapter 05 | Cat

March Issue 079 Chapter 03 | Bear

June Issue 082 Chapter 06 | Gorilla

Armored Beasts Chapter 01 | Lizard

Chapter 01: Lizard
Software used: ZBrush 4.0
Hi, my name is Bruno Cmara and over the next
few pages Ill be explaining the process I used
to create my lizard character. I hope you like it!

The Idea
The main idea for this tutorial was to come up
with an armored creature of some kind, so I
decided to create a reptilian beast that lived a
long time ago, in a fantasy kind of era where
there were few resources and constant conflict.
The beast wasnt very intelligent and basically
lived by fighting for food. He was always one of
the first on the battlefield and his armor wasnt
particularly strong or thick because of the lack
of resources and the fact that the lizards cant
forge metal. It was basically made of things he
found or collected from dead enemies.
With this idea in my head I started to sketch
some rough ideas (Fig.01). I created some
messy silhouettes and then the character began
to form out of these.
Generally the first sketches you make are
the most clich ones. The more options and
variations you sketch, the more interesting and
original they become. In Fig.02 you can see the
option I chose as the concept for my character,
which I then developed into the final concept
shown in Fig.03.

www.3dcreativemag.com

page 43

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

It is here that I defined everything. You dont

need to do a detailed sketch or concept for your
images, but getting some ideas down on paper
may help. It helps me a great deal when I start
the sculpting, as I already know what I plan to
do and have things like scale and pose decided
in advance. I always gather references at this
point as well, as it helps sell the image and
make it more accurate.

Modeling
Then it was time to start the hard work. For the
modeling I separated the character into three
main parts: the head, body and props. Before
anything else though, I started on the main base

Sculpting the Head

1. Create a ZSphere and hit Edit

using ZSpheres (Fig. 04).

On this mesh I had already defined the shapes

2. In Tool > Rigging, click Select Mesh

of the head, but I hadnt detailed it yet so I did a

3. Select the mesh you will use to create the

After building the structure I converted it to

simple retopology to have a better base to start

a mesh (Tool > Make PolyMesh 3D). I then

from (Fig.06).

4. Go to Tool > Topology > Edit Topology

started to define the proportions and general

shape of the muscles (Fig.05).

new topology
5. Turn Symmetry on (if needed) and click on

To make the retopology of any mesh, do the

following:

the model to begin creating new geometry

6. Press A to see the new mesh
7. When you are done, press Tool > Make
PolyMesh 3D.
Thats the process I used to make the new mesh
for the head. This new mesh had some basic
edge loops for a better flow and easy detailing
in the future. Once the new topology was done
I started to detail the head using a reference of
a blue-tongued lizard and a Komodo dragon to
help me.
The first one stands out among all other lizards
because of his nice body texture and weird
tongue. Since my armored lizard was going

www.3dcreativemag.com

page 44

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

to be huge, at three or four times the size of a
human, his skin would be more like a Komodo
dragons or a dinosaurs than a little lizard. Other
references were used too, like iguanas and
other lizards.
After gathering several references, I also
downloaded several alphas related to lizard
skin. You can find great alphas on Pixologics
website.
I started defining the main muscles on the head
and neck and the folds of skin. I then moved on
to the gums and tongue (Fig.07). The eyes were
a simple Sphere3D object and the tongue was
made from ZSpheres.
To make the teeth I masked the position of the
teeth on the gums and used Extract to create a
new subtool. Then using the Inflat tool and the
Pinch brushes, I pulled and shaped each tooth
(Fig.08). Like the tongue, the drool was also
made from ZSpheres (Fig.09).

www.3dcreativemag.com

page 45

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

Finally I detailed the scales around the mouth

and eyes manually. Basically I masked the
mouth region where the scales would be,
inverted the mask and used a combination of
the Standard brush and Inflat brush to highlight
the scales (Fig.10). I used this process for the
major scales; the others I did with skin alphas
(Fig.11).
I didnt spend much time on the shoulders as
they were going to be hidden behind the leather
clothes. In Fig.12 you can see the completed
head.

Detailing the Body

The lizards body demanded a mixture of human
and lizard anatomy. To tackle this I collected as
many references of human muscles and lizards
as possible. I tried to create a strong body that
looked balanced enough to carry the weight of
the armor.
As I had already modeled a base for the body,
I used it to begin to define the muscles of the

www.3dcreativemag.com

page 46

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

limbs, but before I did that I deleted all of the

head geometry as it was no longer necessary.
I started with the arms and hands, and defined
the muscles and veins (Fig.13). I then moved on
to the legs (Fig.14), and finally the torso and tail
(Fig.15). Some parts were not detailed as they
were going to be covered by cloth and armor.
For the scales I used the same process as I did
for the head. I manually modeled the main parts
like the elbow and joints. For the rest I used a lot
of alphas and adjusted any problems that arose.
The final body can be seen in Fig.16. At this
point I had seven subtools: the head, body,

Ctrl key pressed, I masked the rags of leather

bit with the Move brush, to make them fall on the

eyes, tongue, drool, upper teeth and lower teeth.

that I wanted to extract (Fig.17).

body, simulating gravity. I created three different

rags of leather for the torso (Fig.18).

Modeling the Props

Once they were masked I clicked Extract. I

There are several props on this character. I

set the parameters for Edge Smoothness to 0,

divided them into five different parts and created

Surface Smoothness to 0 and Thickness to 0.3.

them in this order: cloth, armor, shield, leather

Depending on the model you make these values

straps and weapons. For both parts of cloth I

may vary. After extracting them I softened the

used Extract (Tools > Subtool > Extract). Extract

edges of the extracted model manually, so I

is just great and really speeds up the workflow.

could have a better range of smoothness. It was

At the lowest level of subdivision and with the

necessary to separate the cloth from the body a

www.3dcreativemag.com

page 47

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

For the lower clothes I had to extract a base

geometry and mask over it to make out the final
cloth. I created two rags (Fig.19).

The Armor
I thought this metal armor would be useful as
the lizard would have to defend against frontal
attacks. It would be very old and worn, with
pieces of chains and wires around. The fastest
way to create it was with ZBrushs ShadowBox.
This is the quickest way to model using
ShadowBox:
1. Create a Sphere (Sphered3D primitive)
and tap the T key to edit
2. Click Tool > Make PolyMesh3D to
transform it from a primitive to polymesh
3. Now click Tool > Subtool > ShadowBox
4. Hold Ctrl and click and drag on the canvas
to clear the mask and erase the sphere
5. Now you have what you need to start
working in ShadowBox.
With a resolution of 300 for ShadowBox
(ReMesh Resolution parameter) and the X
axis symmetry turned on, I drew the mask to
generate the armors base (Fig.20).
to improve the curvature. Then with the Slash1

After this I used some metal alphas for minor

Its even better to build props like this to the

and Slash2 brushes I made marks all over it as

details, such as rust and wear and tear (Fig.22).

correct scale (Fig.21). Simple as that! Now the

if it had been involved in plenty of wars. Another

base of the armor was ready to be detailed. I

great tool I used was the Polish brush, which

With the armature complete, I moved on to

started bending the armor with the Move brush

allowed me to flatten some areas.

modeling the wires and chains hanging from it.

www.3dcreativemag.com

page 48

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

For the wires I used ZSpheres, which I patiently

Shield

rolled one by one until I had the correct

For the lizard I created three different shields.

thickness. For the chains I used a Ring3D

One of them is the medusa shield. I started in

primitive. I modified it until I had the shape of

ShadowBox by creating the basic shape (Fig.

a chains ring and multiplied it until I had the

25). After the mesh was generated I used the

length I required for my chain. Using the Subtool

MatchMaker brush to get the contours of the

Master plugin I merged the rings to create a

cylinder. This new brush is perfect when making

single object (Fig.23).

one surface conform to the contours of another.

Using Transpose to move and rotate, I

To use the MatchMaker brush do the following:

positioned the chains just like the concept and,

1. Tool > Subtool (this should already

using the Move brush, I bent them to give them

contain the object you want to deform)

a sense of movement. You can see the finished

click Append and choose the object to use

piece of armor in Fig.24.

as the contour

2. Now you have two subtools: the main one

and the reference for the contour
3. Position the reference object below the
object to be deformed
4. With the main one selected, choose the
MatchMaker brush in the brush palette
5. Click the center of the object and drag;
now the object will deform in accordance
with the object underneath.
After getting the contour of the cylinder I
subdivided the shield a couple of times,
turned on Symmetry and started sculpting the
Medusas face. For the snakes I masked their
shape on the mesh and used the Inflat brush
to pull them out. For the ornaments I used the
Stitch brush with a round alpha and modeled
some screws around the border. Finally I
destroyed the shield using the ClayTubes and
Slash1 brushes.

www.3dcreativemag.com

page 49

Issue 077 January 2012

Chapter 01 | Lizard

To create another shield I used the same

metal with screws and creases, and made them

process as I did on the previous one, only I

old and broken (Fig.27).

Armored Beasts

changed the format and used a sphere as the

contour (Fig.26).

I then placed the shields and created more wires

with ZSpheres to tie them to the body (Fig.28).

For the third shield I basically used Extract to

create each of the pieces. From a cylinder I

Leather Straps

created a disk and subdivided it to be the wood

I modeled the leather straps using Extract to

part. Then one by one I masked the edge,

match the concept. I masked around the body

center and arrow-shape, and used the Extract

and limbs, but erased a small piece where I

(Tool > Subtool > Extract) to create the metal

could connect the loop with a Ring3D primitive

parts. I then detailed the piece of wood and

(Fig.29).

www.3dcreativemag.com

page 50

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

I repeated this a few times until I had this
(Fig.30).

Weapons
There are many weapons on this character,
consisting of the secondary ones that hang
on him and the main one he uses to attack.
The secondaries are the remains of weapons,
swords and broken spears of past battles.
For the swords I made one complete sword
and from it created some variations. I used
ShadowBox to create the base mesh (Fig.31)
and used Symmetry to create them. Once they
were made I used the Move and Polish brushes
to detail them. I created variations using clipping
brushes to break them into different parts.
To cut any object in ZBrush using Clipping
brushes, do the following:
1. With your object on the screen and in Edit
mode (T key) hold Ctrl + Shift.
2. The Brush and Stroke palettes have now
changed. Choose a Clipping brush like
ClipCurv and a stroke, like Curve.
3. Still holding Ctrl + Shift, click and drag to
start drawing the cut.
4. To make a curve just tap the Alt key. When
you have finished, release Ctrl + Shift to
cut the mesh.
I used the same method for the spear (Fig.32).
There is also a broken axe, which again I
created by using the same method as before.

The blade and the handle are the same mesh.

Texturing and Posing

The Polish brush was essential here to make

With the hard work done it was time to put some

the details really sharp. I also used rusty metal

color on the character. As the head and body

alphas to make it look worn (Fig.33).

were different subtools, I focused on finishing

the texture of the head to give the final look

www.3dcreativemag.com

The other main weapons are a machete and a

for the body. I started by filling the head of the

cleaver. These were all created in the same way

lizard with a yellow tone, which also complied

(Fig.34 35).

with the main reference of the blue-tongued

page 51

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

lizard. I then used a lighter tone for areas like

under his chin and chest. I like to use an alpha
for the transition of tones to match the texture of
the skin (Fig.36). In this case I chose to use a
scales alpha.
With the Standard brush and FreeHand stroke
I added some dark stripes at the beginning of
the back, as they were on the reference. I also
polypainted some more random scales of the
same color on the stripes. For the tongue and

teeth I used several references of human teeth

Before proceeding with the texture I broke the

and the mouths of some lizards like the Komodo

symmetry and posed the character. For the

dragon.

pose I tried to follow the concept, but with some

differences in the pose of the limbs to create a

For the eyes I used the DragRect stroke. I

better silhouette. I deleted hard objects such as

projected a picture of a chameleons eye as I

the armor and shields, and used the Transpose

found them much more expressive than other

Master to pose him (Fig.39).

lizards. For the drool I used a reference image

of a Komodo dragon, which has very thick and

Once I was happy with the silhouette, I started

white drool. After the head was ready and the

to place the props and used the Transpose

final look was okay, I painted the body in the

Masters to make it all work together. This part

same style. The final body can be see in Fig.37.

took some time because of the large amount of

props. I also had to be careful to make sure no

For the cloth I used different images and leather

parts intersected with each other.

tones that had been treated in Photoshop. Using

www.3dcreativemag.com

the DragRect stroke and Alpha 01 I projected

With the pose ready, I continued to finish the

the images onto the sculpt (Fig.38).

texturing. I used the same texture for the leather

page 52

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

straps, varying the tones between them, and I

face and the rusted gray metal for the rest.

also applied some metal textures to the rings

I didnt use a texture here. For the wooden

(Fig.40).

shield I applied the worn silver matcap for the

metal part, and a wood texture for the middle.

The next step was to polypaint the armor and

Finally for the round shield I modified the deep

wires. I searched for textures such as rusted

bronze matcap (Material > Modifiers) to a darker

metal and rope wires, and applied them with the

version and applied it.

DragRect stroke tool. For both I used a darker

version of the textures to vary the tone in some

Weapons

areas.

For the secondary weapons on his back I used

a single material. Maybe I should have used

For the shields I basically just used metal

some variation of hue to achieve a better look.

matcaps, which are freely available on the

Again the deep bronze matcap was changed to

Pixologic website (http://www.pixologic.com/

a grayer version, like steel. This matcap is great

zbrush/downloadcenter/library/). On the

because it creates a sense of texture. It darkens

website, under the option MATCAP METAL, I

the cavities and highlights the bumps so the

downloaded Deep Bronze, Rusted Gray and

weapons have a very old look (Fig.42).

Worn Silver Metals (Fig.41).

For the main weapons I also used a modified
The only texture I used was for the wooden

matcap for the metal parts. I used the

part of the shield. For Medusas shield I used

SketchShaded2 matcap for the wood, along with

two matcaps: the deep bronze for the Medusas

a few textures (Fig.43).

And thats it. The texturing process was now

finished and it was time for my PC to work on
the render passes.

Rendering
For the final image I wanted a very dark mood,
with low light, as if he were in a cave. Nine
render passes were used: Color Pass, Ambient

www.3dcreativemag.com

page 53

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

Occlusion, Main Light, Specular, Right Rim

Light, Left Rim Light, Depth of Field, Mask and a
SSS pass (Fig. 44).
Before rendering all the passes I saved a
view using ZAppLink (Document > ZAppLink
Properties). This was to ensure that all the
passes would be rendered at the same angle.
I also applied a black background to all the
passes and increased the FocalAngle to 140
(Draw > FocalAngle) to give more depth to the
scene.

Color Pass
The first pass I exported was the Color pass,
which is where all the colors were. To do this I
simply applied the Flat Color Standard material
to the entire scene. By just using this material,
I would have lost the metal shaders, so I kept
the matcaps of the weapons and all metal parts
by going to Color > Fill Object, with only the M
(Material Channel) button on (Fig.45).

Ambient Occlusion
For the Ambient Occlusion I also used the Flat
Color Standard material, but with all the textures

hold Shift and click on the brush-shaped

I only put the AOcclusion button on and in

and polypaints off. To turn off the materials and

icon. Now you can use any color or matcap.

Render > BPR AO, I used the following values:

textures of all the subtools, go to Tool > Subtool,

Regarding the parameters in the Render palette,

- Strength:1
- Rays: 100
- Res: 4000
- Angle: 360
- Blur: 2
- VDepth: 0
- LDepth: -1
- Gamma: 3
And thats it. The resulting image is in Fig.46.
Then in Photoshop I used Levels to highlight a
few details.

www.3dcreativemag.com

page 54

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

Main Light
The Main Light pass was a simple sun light
coming from the right. I used a white light so
I could change the color in Photoshop at will.
I set Intensity to 0.7, Ambient to 0 and the
BasicMaterial as a matcap.
I turned Shadows on in the Render palette and
the BPR Shadows option and set them like this:
- Strength: 1
- Rays: 100
- Res: 4000
- Angle: 20
- Blur: 6
- VDepth: 0
- LDepth: -1
I clicked the BPR button and made the Main
Light pass (Fig.47).
difference is that the light source was behind the

Mask at the same time if you want it to. I used

object. To do this I simply double-clicked on the

the same parameters for the Fog tab as I did in

For the Specular pass I used the ReflectedMap

point of light in the Light palette. I also increased

the Depth of Field tab (Depth Cue). This way

matcap and in Material > Modifiers I set Ambient

Intensity to 2, because it gets weaker when its

I could see in real-time how the depth of field

and Diffuse to 0 and also adjusted the specular

behind the object. I made some adjustments

would blur the final image.

curve based on references. For the light I used

in Photoshop to highlight these rim lights even

the same position and the same parameters as

more (Fig.49).

Specular Pass

Id used for the Main Light pass, and hit BPR

(Fig.48).

Left and Right Rim

Lights

The Depth Cue parameters were as follows:

Depth of Field and

Mask
These two passes were created simultaneously

- Intensity: 100
- Softness: 4
- Depth 1: -0.22
- Depth 2: 0.16

using the Create Maps button (Render > Create

For these two passes I used the same

Maps). This can generate the main image,

With the Create Maps button enabled, I clicked

parameters as the Main Light pass. The

Depth of Field, Shadow, Ambient Occlusion and

BPR and created these two passes (Fig.50).

www.3dcreativemag.com

page 55

Issue 077 January 2012

Chapter 01 | Lizard

Armored Beasts

SSS

the render passes in Photoshop. Fig.52 shows

mode. These fitted perfectly, but I duplicated

For Subsurface Scattering I used the

all the passes in order of assembly. I started

the right rim light layer to highlight some areas a

DoubleShade1 matcap. In Material > Modifiers,

by opening the Color pass of the character and

little more.

for both the S1 and S2 slots, I set Specular to

applied the Occlusion pass using it in Multiply

0. In Tool > Subtool I hid all the objects except

layer mode.

Finally there was the SSS pass over all the

the head, body and drool and I turned off the

layers in Screen mode. A lot of this layer was

brush-shaped icon to disable the polypainted

I then applied the Main Light pass, which was

erased leaving it in some parts, like the mouth,

textures. I chose a reddish color as the main

given a yellow tint in Photoshop using Hue and

hands and tail.

color and in the Light palette double-clicked on

Saturation. This was applied using the Soft Light

the point of light to put it behind the character. I

layer option.

After I had assembled this I flattened the image

then set Intensity to 2, Ambient to 0 and turned

and started a new one. In this second version

on SSS. Finally, in the Render palette, I also

The Specular pass was then added in Screen

I applied the background using the Mask pass.

enabled Shadows and SSS. I pressed the BPR

mode. In this pass I deleted some areas such

Then I highlighted the center of the scene,

button and the SSS pass was ready (Fig.51). I

as on the pieces of leather and on some metals

darkened the edges of the image and used

adjusted this slightly with Levels in Photoshop.

because it doesnt make sense to have specular

the Depth of Field pass in the Lens Blur filter

there.

to achieve the blur effect. Thats it! Finally the

Final Composition

armored lizard was done (Fig.53).

Finally we have reached the last part of this

Immediately on top of the Specular pass I

tutorial. Now all I needed to do was assemble all

applied the Rim Light passes using Screen layer

www.3dcreativemag.com

page 56

Issue 077 January 2012

Armored Beasts Chapter 01 | Lizard

Conclusion
At the end of a project like this you learn a lot as
theres always room for improvement. If I went
back in time and started again I would change
several things to make it better. I think that
everyone should leave their comfort zone from
time to time to learn and evolve further. I cant
wait to start an even bigger project.
I hope you enjoyed the tutorial. For me it was
an honor to write for 3DCreative and if you have
any questions or feedback feel free to contact
me.

Bruno Camara
For more from this artist please visit:
http://bruno-camara.blogspot.com/
Or contact him at:
[email protected]

www.3dcreativemag.com

page 57

Issue 077 January 2012

With all topics and skills there are core subjects that
must be considered and understood in order to get
the best results. When working in 3D, one of those
is topology. In this series of tutorials Diego Maia will
be talking us through the creation of his interesting
character, whilst explaining the intricacies and
importance of this fundamental subject.

December Issue 076

Chapter 01 | An Introduction to Topology

This Issue
Chapter 02 | Limbs and Accessories

Next Issue
Chapter 03 | Cleaning up and Adjustments

March Issue 079

Chapter 04 | Hard Surfaces

Topology Chapter 02 | Limbs and Accessories

Chapter 02 - Limbs and

Accessories
Software used: 3ds Max
In the first chapter we talked about the concept
of topology and how retopologizing can make
the process faster and help you get much better
results. We have already done the retopology
for the head and the torso, so now we are going
to talk about the arms, hands, feet, pants and
shoes (Fig.01 02).
As I mentioned in the previous chapter it is
important to choose the direction the loops
follow. So open the model that you left at the
end of the first chapter and we will start working
on the forearm and linking it to the shoulder.
At this point you can work with larger polygons
and add a subdivision later if you want as
this is a bit faster. Just be careful because it
can generate loops and polygons that are not
necessary (Fig.03).
You can see in Fig.04 05 how this way of
creating the topology allows you to create loops
that follow the contours of the anatomy.
We now have enough loops to create Blend
Shapes to inflate or reduce any muscle/volume
on our geometry. It is worth pointing out that
you need to try to make sure the polygons have

www.3dcreativemag.com

page 59

Issue 077 January 2012

Chapter 02 | Limbs and Accessories Topology

an average size and distance. Avoid having

tremendous differences between polygon sizes.
The next step is to define the direction of the
loops on the hand and fingers. Note that I didnt
start from the edges that come from the wrist
(Fig.06 08).
Next we will move on to the pants. You need
to follow the same procedure as stated before.
Even though this is simulated cloth, it is worth

When you move on to create the thigh area,

creating topology that fits the cloths folds. This

extrude a large polygon, then subdivide the

is so that these folds can be exaggerated if the

points and position them using the Snap tool

character is to be animated. If you are modeling

(Fig.12).

a character that has very detailed topology it is

probably not necessary to create these folds in

The loop then goes below the knee, which

the cloth (Fig.09 10).

means that we will have the shape of the knee

when the leg bends. This means we will avoid

In Fig.11 you can see how you should detail the

the appearance of a bent cylinder. This can be

pocket area by following the direction that the

further improved with the use of a Blend Shape

pockets would flow in.

to pull the knee out, or even in the folds from the

back of the leg. It is very important to talk to the

rigger or director about these technical details
before you start, because sometimes it can
be done in other ways (such as an animated
Displacement or a Normal map) or even
unnecessary (Fig.13 14).
For the feet we will do things in the same way
as we did the head. Create a polygon and

www.3dcreativemag.com

page 60

Issue 077 January 2012

Topology Chapter 02 | Limbs and Accessories

extrude its edges to cover the model to create

the topology (Fig.15 16).
Although we have two objects here (foot and
shoe), the blocking should be done as one
subtool. This kind of choice can speed up the
process as we can easily separate the objects
later (Fig.17 18).
A common mistake is to keep the amount of
polygons in the mesh quite low. This economy
of polygons, in most cases, is irrelevant. The
idea is to have geometry with sufficient polygons

www.3dcreativemag.com

page 61

Issue 077 January 2012

Chapter 02 | Limbs and Accessories Topology

to maintain the overall shape of the character
without subdivision, and to not have a big
difference between the polygon sizes. Keep the
polygons as close as possible to a square shape
as well. Its exactly what we did for the head
(Fig.19 20).
In Fig.21 we can see the details from the bottom
of the pants. Its also nice to give thickness to
our geometries. The amount of detail we show
here will depend on the purpose of the model.
If it is for a production that requires no detail on
the mesh they will probably prefer Displacement
or Normal maps or neither. However some
objects (especially for close-ups) need extreme
detailing. This kind of work without retopology
can become a nightmare and last for days,
weeks or months.
In Fig.22 you can see how I created the pocket.
Create an opening for the pocket as a Blend
Shape so the characters hand or anything else
could be put in it.
Extract a loop of polygons from the pants to
create the belt. It is strongly recommended
when overlapping geometry because it allows
the upper model to follow the surface of the one
bellow. When box modeling its best to start with
a cube and the new parts should be extracted
from this topology (Fig.23).

www.3dcreativemag.com

page 62

Issue 077 January 2012

Topology Chapter 02 | Limbs and Accessories

Create the belt fasteners as separate geometry.

adjustments and re-projection in ZBrush. This

In most cases this is not a problem, but if you

will be the subject of our next tutorial. I hope its

are doing this to be animated and you are

been helpful so far (Fig.25).

unsure, ask the rigger (Fig.24).

Diego Maia

Thats our retopology complete. See how the

For more from this artist visit:

geometry keeps the shape and design even

http://maia3d.blogspot.com/

with no subdivisions. Now its time for final

Or contact him at: [email protected]

www.3dcreativemag.com

page 63

Issue 077 January 2012

SynthEyes 2011

Match-moving,
Set Reconstruction,
and Stabilization

nd
a
n
o
i
t
c
a
r
t
x
ture E
x
e
T
g
n
i
ter!
r
z
o
a
p
m
x
a
e
h
s
t
t
i
c
w
e
Now
erEff
t
f
A
w
e
n
d
e
Sophisticat

See the tutorial at http://www.youtube.com/SynthEyesHQ

Pro 64-bit version only $599 for Windows and Mac OS X,
full-featured entry-level 32-bit version an incredible value at $399
Typical Applications

What Our Users Say About SynthEyes 2011

Fixing Shaky Shots

I've been faffing about with the texture extraction

tool and it's brilliant!

Virtual Set Extensions

Animated Character Insertion
Product Placement
in Post-Production
Face & Body Motion Capture
Talking Animals

Has to be seen to be believed!

You've got a great product at an incredible price.
Texture extraction in Syntheyes 2011 is awesome.
It works so well it must be magic.
I love the tracker radar!
It's useful AND it looks cool.

Andersson Technologies LLC

Seventh year in the market, serving artists in over 70 countries

Rudolf Herczogs stunning image Sector

21 reminds us of some of the cool sci-fi
films of the 90s, and in this Making Of he
tells us exactly how it was created. The
whole process Rudolf uses is fascinating,
but pay special attention to the mix of
texturing and post-production work,
which creates stunning results.

Sector 21 Making Of
Sector 21
Software used: Cinema 4D

Inspiration
The idea for this scene came when I was
going through a few web pages showing old,
abandoned industrial photos, which is often one
of my primary sources of inspiration. I came
across an old steel plant and a shot of a huge
blast furnace covered with bolts and pipes.
Ive always loved making scenes with loads of
detail work, so I thought it would be cool to use
the furnace as a large platform-like, hanging
structure and place it into a fairly cramped city
environment. This would blend both industrial
and futuristic elements. Inspired by what some
parts of the world would be like in terms of
air quality, I decided to turn it into a sort of air
filtering machine and add a number of vents to
both the machine and its surroundings, as well
as adding a few characters, mainly for scale
purposes but also to add some life to the scene.

Modeling
With any scene I work extensively from primitive
objects and build all the models from smaller
parts. I used the same technique here and
started out with a torus object as a base, which

few simple characters to show the scale. Next

supposed to hang freely, I still wanted it to

I started covering with extra plating, vents, bolts

I built the body of the structure, which would

be somewhat connected to the ground. I had

etc., as well as pipes made of sweep nurbs

support the base. I modeled a set of air tanks

already left a hole in the ground plane for this,

(Fig.01 02).

surrounding it and connected these with thicker

and added a number of thick pipes to its center.

pipes. The thought was to use the body as the

I also placed wiring all around as if they would

Covering only the portion of the torus visible to

control center of the structure, so I also modeled

connect the structure to some sort of machinery

the camera, I then started working on the upper

a smaller service platform halfway up.

beneath. Once that was done I modeled a few

billboards and placed them around the structure

platform. I made a set of railings surrounding the

base and added a few ladders allowing access

The next step was to fill up the empty part

to the platform from the ground. I also added a

beneath the base. Although the structure was

www.3dcreativemag.com

page 67

(Fig.03 04).

Issue 077 January 2012

Making Of

Next I wanted to pay closer attention to the walls

instead. I used a number of tube objects for the

surrounding the structure. My initial idea was to

walls and Booleans to cut some holes for doors

use huge columns surrounding everything and a

and fans. Then I reworked the large fans used

more open space, but as the model progressed

on the base and embedded a few of them into

I decided to go for a more closed environment

the upper section of the walls. I also covered the

Sector 21

door openings with blinds (Fig.05).

I did some more work on the outer walls, and
then went back to the main structure and added
the support beams that would actually hold the
entire structure up. During this stage I also set
up the proper camera view.
I decided to position the camera close to the
ground to add a little bit of scale to the scene
and also allow the viewer to see both the ground
and the people on it, as well as most of the
structure. I also kept parts of the sky visible for
atmospheric purposes.

Materials & Lighting

This part was a no-brainer. I decided to go

www.3dcreativemag.com

Once I had attached the support beams to the

with a simple consistent material for the whole

outer walls I modeled a platform on top of the

scene and do the rest in Photoshop. This is a

main structure, a few walkways leading out to

procedure Ive tried before that worked out quite

the edges, as well as additional fans. To fill up

well with one of my previous images called The

the scene even more I added some wiring, a few

Gateway. I then used Maxwells physical sky

extra billboards and additional detail on both the

and sun set at mid-day as the only light source

main structure and the walls (Fig.06 07).

and let it cook overnight (Fig.08).

page 68

Issue 077 January 2012

Sector 21 Making Of
Post-production
Once in Photoshop I started out by doing a
few initial color corrections then applied a few
textures to add a little bit more detail, mainly
to the plating of the base. With the help of an
alpha mask, I also added the sky which could be
seen in the small gaps at the top. Then I used
a copper texture for the areas next to the fans
on the outer walls. Although I wanted the image
to be slightly monochromatic, I also wanted
to add a little bit of color in certain areas; not
much, but just enough to break the uniform look.
Once that was done it was time to add some

dirt to the scene. For this purpose I used black

a few thick lines, added a fairly large amount

and white dirt maps and various layer effects,

of Gaussian blur to them and decreased their

applying these at the edges, cracks and larger

opacity slightly. I then used a layer mask and

clean surfaces etc. I also made a few imaginary

the Gradient tool to shape the rays. I also used

billboard textures for the blank modeled ones in

the Ellipse tool in a similar way to create a little

the scene (Fig.09 11).

bit of haze where the rays come through the

support beams. To wrap things up I did a few

The next step was to add a little warmth to the

more color and gamma corrections before I

overall atmosphere, so I decided to add a few

baked all the layers and finalized the image

sun rays coming through the opening at the

(Fig.12).

top. For these I used the Line tool to create

www.3dcreativemag.com

page 69

Issue 077 January 2012

Rudolf Herczog
For more from this artist visit:
http://www.rochr.com/
Or contact him at:
[email protected]

! tion
W
cip
O
s
N b

E d,
BL loa

A w
IL l Do

A ita
AV, Dig

D
DV

LEVEL UP YOUR DIGITAL SCULPTING SKILLS

TRAIN WITH KILLER ARTISTS

3D CHARACTER DESIGN SERIES
WITH SCOTT PATTON

In this two volume series, Scott Patton shows the processes he uses to
create a 3D character for feature films. The first volume explores
Patton's fast and efficient method for concept sculpting, skipping the
2D sketch phase all together and designing the character entirely
within ZBrush. He covers everything from blocking out the forms
and fleshing out the muscles, to adding props, detailing with alphas
and posing the character. The second volume covers methods for
creating a final color rendering using ZBrush and Photoshop. Patton
cr
shows how he squeezes the most from ZBrushs powerful renderer to
create both a wide and close-up shot of the character. He then shares
creative Photoshop tips and tricks to quickly get to a finished piece of
concept art from the ZBrush renders, covering topics such as adding
and refining skin texture, hair, eyes, shadows and scars. Patton also
discusses how to create backgrounds that enhance the character and
composition.
overall
ov

All Tutorials Are Now Available

As DVDs, Digital Downloads,
And Part of The Online Training Subscription

www.thegnomonworkshop.com

SUBSCRIBE NOW & SAVE UP TO 25%

on this already amazing value publication!

12 ISSUES FOR THE PRICE OF 9

24.75 save 8.25 (approx - $35.91 save $11.97)

6 ISSUES FOR THE PRICE OF 5

13.75 save 2.75 (approx - $19.95 save $3.99)

visit www.3dcreativemag.com for full information.

Have your 3DCreative Magazine

Download link delivered automatically
to your inbox every month...
and have it before anyone else!

Tutorials

Swordmaster 2
3dsmax & Maya
Chapter 5 - Texturing
by Gavin Goulden
The Cyborg Projects
Chapter 3 - Power Plugs
by Andrzej Sykut
Sculpting Armored Beasts
Chapter 2 - Chicken
by Jose Alves da Silva
Topology
Chapter 3 - Cleaning up
and Adjustments
by Diego Maia

Interviews

Igor Kudryavtsev

Galleries

another 10 of the best

Images from around the world!

Making ofs

Desert Gas Station

by Eugenio Garcia
DAM v6 Making of
by Rafael Grassetti

visit www.3dcreativemag.com
for full information and to
purchase current and previous
issues for only 2.75 each!
Image by Igor Kudryavtsev

With the release of 3DTotals new book,

Digital Art Masters: Volume 6, we have
some exclusive chapters for you...
This is more than just an artwork book.
Not only does it feature full-color, fullpage images, but each artist has given a
detailed description, in their own words,
of the creation process behind each piece
of published artwork. And theyve done it
especially for this book!

This month we feature:

Everything
Beautiful Is
Far Away
by Marek Denko

The following shots of the Everything Beautiful is Far Away book pages are featured here in full-resolution and can be read by zooming in...

3DTOTAL BOOKS

Preview the entire Digital Art Masters: Volume 6

book online by clicking here.
Digital Art Masters: Volume 6 delves into the working practices of some of the worlds
best digital artists to reveal the creation processes behind their breathtaking images.
Originally launched in 2005, the annual Digital Art Masters series continues to
showcase the work of some of the finest 2D and 3D artists from around the world.
The latest volume, Digital Art Masters: Volume 6 is our biggest book yet. It welcomes
another 50 up and-coming and veteran artists, and follows the tradition of taking
readers beyond the breathtaking images with detailed breakdowns of the techniques
and tricks each artist employed while creating their stunning imagery. Inspirational
and instructive, this is more than just a gallery or coffee table book, this is a timeless
resource for any digital artist. The special hardcover edition is only available to
purchase from www.3dtotal.com/shop
Hardback - 21.6cm x 27.9cm | 320 Full Colour Premium Paper Pages | ISBN: 978-0-9551530-5-1

3DTOTAL.COM

Visit 3DTotal.com to see our full range Book products

Chapter 4 Unwrapping
In 2006 3DTotal created some groundbreaking
training that quickly made a name for itself as
one of the best 3D training resources available;
that series was called the Swordmaster! Well
five years later the Swordmaster is back
and better than ever. In this series industry
professional Gavin Goulden will be talking you
through how to take a concept and turn it into a
top quality character ready for use in a game.
From basic modeling through to sculpting and
texturing, Gavin will cover every step in great
detail so that even an inexperienced 3D artist
will be able to comfortably follow this series.

Chapter 1 | October Issue 074

Base model

Chapter 2 | November Issue 075

Sculpting

Chapter 3 | December Issue 076

Low Poly Model

Chapter 4 | This Issue

Unwrapping

Chapter 5 | Next Issue

Texturing

Chapter 6 | March Issue 079

Rendering

Swordmaster 2

Chapter 4 Unwrapping

Fig 01

Software used: 3ds Max

Introduction
In this chapter we will be covering the creation of
a UV map for our character. A nice clean unwrap
is usually an overlooked part of the process that
is extremely important to our final product. With a
well laid out UV map you can benefit from texture
resolution and cleaner texture bakes when
creating Normal and Ambient Occlusion maps.
To begin, analyze which parts of the low poly
mesh can be unwrapped once and mirrored for
optimal UVs. In earlier steps we also covered
instancing objects for this reason, such as the
bullets and shoulder pad panels. In an ideal world

Fig 02

everything would be unique and have finer details

to create asymmetrical detail, but given modern
day standards it is wise to mirror sections that
will not be focus points and leave asymmetrical
detail to larger, iconic pieces. For this character
I recommend mirroring the limbs, half of the
shoulder pads and the helmet, leaving the chest
and face as fully unique objects (Fig.01).
Next create a standard material and assign a
checker board pattern texture to the Diffuse slot.
Using a checker pattern is a great way to make
sure that all of the elements in your UV map
are taking up the correct amount of space. For
example, seeing many tiny squares on the chest
and only a few large squares on the arm will tell

Fig 03

you that you need to devote more UV space to

the arm, or less to the chest, to make them equal.
This is important when texturing as you will want
an even texel density along the mesh to make
sure details are at the same scale.
In Max press M to bring up the Material Editor.
Select a shader ball and navigate to the Diffuse
texture slot. Click on the button to the left and
select Checker from the list. Once this is done
properties will be available to you so that you can
alter the checkers appearance. I usually just stick
with the normal black and white checkers and

www.3dcreativemag.com

page 79

Issue 077 January 2012

Chapter 4 Unwrapping
set the tiling to 25 x 25. Having more checkers
visible to you just makes it easier to visualize

Swordmaster 2

Fig 04

the real estate each piece of the mesh is taking

up, and having equal U and V tiles ensures that
the checkers will be square. Once the shader
is set up, select all of the objects in the scene
and assign the new checker material to them
(Fig.02).
Grab the visor and apply an Unwrap UVW
modifier to it. This will be a constant step
throughout the entire tutorial as Max requires a
modifier to access the models UV information.
Once this has been applied, enter Edit mode,
select all of the faces and assign a simple planar
map. Based on the appearance of the checkers
you can see that there will be some distortion
along the edges of the visor. In the UV editor,

Fig 05

grab these UVs and pull them left or right. Make

sure that Constant Update (located in Options)
is enabled to immediately see these changes in
real time (Fig.03).
Up next is the face. After applying the modifier,
grab all of the faces and assign a simple planar
projection to the model. This will cause some
significant distortion towards the edge of the
face and the sides of the nose, but it will give us
a solid starting point (Fig.04).
Apply a Pelt map to the model. This will be
based off of the boundaries that we have
already set in the previous step as Pelt maps

Fig 06

are general UV island based. If the initial result

isnt perfect, no worries; select the UVs that
you would like to adjust, even if it is all of them
and apply Relax (located in Tools > Relax in
the UV Editor). This will average out the space
between UVs and save a lot of tedious work by
eliminating the need to adjust each UV manually
(Fig.05).
Since we have split the helmet down the middle,
unwrapping it is fairly easy. By applying a Pelt
map to the model and relaxing a few of the
trouble areas, we get a fairly clean and easy to
read image of our helmets shell (Fig.06).

www.3dcreativemag.com

page 80

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 07

The helmets antennas are a bit more

complicated as there are extrusions that simply
cant be connected to the main UV island. This
is a good example of the need to find natural UV
seams in your model that will be hidden from the
viewer and/or easy to paint over in the texturing
process. To start it off, select all of the faces
in the base of the antenna and apply a Planar
map. Grab all of the unrelated faces, the ones
belonging to the antenna itself, and move them
aside (Fig.07).

Fig 08

From here, either relax the UVs of the island or

grab the outer edge UVs, expand the selection
scale, shrink the selection each time and repeat
the process. This is a manual way of spreading
out the UVs and making sure the original shape
of the island remains intact (Fig.08).

To finish the helmet grab the face of each plane

Fig 09

on the antenna and apply a planar projection

to each one. This should give four UV islands.
Next weld the UVs on the boundaries together,
leaving a seam at the bottom of the antenna.
Once all of the islands have been merged into
one, straighten out the UVs horizontally and
vertically. Do this where possible to help save
on UV space; irregular shapes can be harder
to manage and squeeze into the map, and to
assist when texturing as it is generally easier to
paint on straight shapes than curves (Fig.09).

www.3dcreativemag.com

page 81

Issue 077 January 2012

Chapter 4 Unwrapping
Next we will tackle the torso. At this stage split
the body down the middle, unwrap half of it,

Swordmaster 2

Fig 10

mirror a duplicate of the model and stitch it

together. In my case I have decided to leave the
main seam of the torso running down the back
as it will usually be covered by the characters
cape and is generally easy to paint over. Grab
all of the faces and apply a planar projection.
This will cause a lot of the faces to overlap as
it will be assigning a projection to the front and
back of the model, which will overlap on the
same plane. Once this is done, grab the faces
that make up the back and detach them from
the main island, moving the new island off to the
side (Fig.10).
There is a lot of distortion along the side of the
character, so grab most of the faces on the rib

Fig 11

cage and apply another planar projection that

will break these UVs off from the main island
and give them a cleaner unwrap (Fig.11).

Next line up the rib cage plane as best as

possible to the chest and stomach sections.

Fig 12

Once you are happy with the positioning, weld

the boundaries together and this will result in
one island again. I find this method to be less
confusing and time-consuming than pulling
out each UV individually. If the UVs have
become too distorted or if there are overlaps,
dont hesitate to grab the UVs and relax them
(Fig.12).

www.3dcreativemag.com

page 82

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 13

Once you are happy with the chest you basically

need to repeat the process for the back section
by creating a plane near the obliques and
welding them to the main back island. Also
tweak the shoulders manually, pulling the UVs
out from the main island for less distortion.
After both halves are looking good, weld them
together along the side of the character and
Relax any UVs that might be causing problems.
Next collapse the Unwrap UVW modifier and
mirror the model. It is important here to just
duplicate the model and not instance it as you
will be flipping the UVs on the new model. After
you flip the UVs, merge the models together,
welding the geometry down the front and back.

Fig 14

Once the model is complete, access the UVs

again and weld the UV islands down the chest
(Fig.13).
Moving on to the shoulder pads, grab the
underside of one half and apply a planar
projection. To me, areas like this are an
exception to the rule. This is because the
geometry only exists to give the model depth
and most likely will never be seen or will be very
hard to spot. For those reasons these sections
would be the first to get less pixels devoted to
them in the unwrap, as they will most likely be a
solid or a near solid color (Fig.14).

Fig 15

Next grab the remaining faces and pelt map

the island. Because we have a well-defined UV
boundary the result should be a fairly clean oval
type shape. If needed you can relax some UVs
or manually push out the outer edges (Fig.15).

www.3dcreativemag.com

page 83

Issue 077 January 2012

Chapter 4 Unwrapping
Moving over to the left shoulder pad you
basically repeat the process. First break off the

Swordmaster 2

Fig 16

underside of the shoulder pad and pelt map the

top half, relaxing or manually tweaking problem
areas to fix texture distortion (Fig.16).

The dividing panel between the halves of the

Fig 17

left shoulder pad is fairly easy to handle. Simply

apply a planar projection and adjusted the top
and bottom UVs for more even pixel distribution
(Fig.17).

For the forearm armor it is more or less the

same situation as the shoulder pads. To begin,

Fig 18

grab the underside and apply a simple Planar

map. Because the tabs of the forearm armor
are connected, they may need to be manually
adjusted (Fig.18).

Next apply a Pelt map to the top side of the

armor plate and relax or manually adjust the

Fig 19

UVs where needed (Fig.19).

www.3dcreativemag.com

page 84

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 20

The cape is fairly easy to take care of. Simply

make two planar islands, one for the flap
covering the back and one for the ring that
goes around the shoulders. Once this is done
grab both islands and weld their UVs together.
Since the cape has a slight flare dont bother
straightening out the edges as it could cause the
capes UVs to become distorted (Fig.20).

Fig 21

Up next is the belt. This is a pretty simple planar

object. Take the time to straighten out the
vertical and horizontal edges, again to make the
UVs easier to pack in the final map and to make
the object easier to read in 2D space. Weld the
back of the belt to the main island to avoid a
seam on the top of the belt (Fig.21).
For the ammo apply a cylindrical projection to
just one of them and rotate/move the projection
controller as needed to get the final result,
which should leave the UV seam at the back

Fig 22

of the ammo. Also split the top and bottom off

into planar projections, but dont bother welding
them to the main island as only one edge would
be welded, leaving the rest exposed, and it is
easier to manage one rectangle and two circles
than it is one larger awkward shape. Youll
notice that by changing the UVs of one ammo
model, all of them should be updated due to the
fact that they are instanced copies (Fig.22).

Fig 23

For the belt clip apply a planar projection to

each piece and weld them together following the
path of least resistance. In my case I choose to
have a seam on the top and bottom of the model
over the distortion created by compensating for
the curve in the geometry (Fig.23).

www.3dcreativemag.com

page 85

Issue 077 January 2012

Chapter 4 Unwrapping
The pelvis armor is similar to the torso piece
we covered earlier. Split the model in half and

Swordmaster 2

Fig 24

apply planar projections to the front, side and

back. You may have to do some clean-up work
to spread out the underside of the armor as
well as the hole in between layers on the side
of the character. Once this is done duplicate
the model, mirror it, flip the new models UVs
and merge the models together welding the
geometry at the crotch. Once this is done weld
the front UVs in the editor and relax the UVs
where needed (Fig.24).

Moving on to the leg armor, assign a cylindrical

projection to the model. After adjusting the

Fig 25

projection to make the seam on the inner leg,

youll notice that the seam is fairly jagged and
not clean at all. This is, however, a very strong
starting point for our leg, especially considering
that the outer leg only needs some minor cleanup work (Fig.25).

Next grab the strips making up the inner leg

seam and apply planar projections to them.

Fig 26

Once this is done weld them to the main island

we previously created and begin, relaxing and
tweaking UVs to make the layout as clean as
possible (Fig.26).

www.3dcreativemag.com

page 86

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 27

Once the leg UV unwrap is looking good move

onto the angular pieces that are separate
geometry elements of the leg armor. These
pieces are a little tough to get right and will take
some massaging. Do a planar projection and
manually pull out the UVs as using pelt on this
sort of complicated object can lead to weird
results that dont resemble the actual model
(Fig.27).

Fig 28

Repeat the process for the other half of the

angular details. The shapes are not symmetrical
so you dont need to unwrap each one as a
unique object (Fig.28).

For the knee area, which is our organic element

Fig 29

that will enable us to bend the leg naturally, use

a simple cylindrical projection, favoring the inner
leg for a seam location (Fig.29).

www.3dcreativemag.com

page 87

Issue 077 January 2012

Chapter 4 Unwrapping
Next up is the lower leg armor. Follow the same
technique as in the earlier steps. Analyze the

Swordmaster 2

Fig 30

mesh and determine how to break it up by

planes and where to leave the UV seam. Split
the mesh into three planes, basically the front
and two sides, leaving the seam towards the
back of the calves where the armor plates meet
(Fig.30).

Moving on to the boot model, first grab the

bottom of the foot and give it a planar projection.

Fig 31

This helps split these UVs off from the main

island of UVs that we will be working with and,
since the bottom of a characters feet are rarely
seen, can be given less real estate if needed
(Fig.31).

Next grab the top side of the foot and apply a

planar projection, which essentially splits the

Fig 32

model in half. Grab the two halves, which should

consist of the left and right side of the foot, with
a seam running down the back, and apply a Pelt
map to each one. Both sides are not identical,
so the result will be slightly different, but should
be quite similar (Fig.32).

www.3dcreativemag.com

page 88

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 33

Once you are happy with all three elements,

weld the top side of the foot to both halves and
leave the seam of the foot near the sole and at
the back of the boot near the ankle (Fig.33).

Fig 34

Moving over to the arm and hand, grab the

faces that will make up the arm, splitting the two
at the wrist. With these faces selected in the
UV Editor, detach them and apply a cylindrical
projection, leaving the seam on the underside
of the arm as this will rarely be seen and mostly
covered by armor plates (Fig.34).

Next split the finger and thumb UVs from the

Fig 35

hand and move them aside. Grab the top of

the hand and apply a planar projection. Do the
same for the palm and weld the two halves
together at the bottom of the hand, leaving the
seam at the fore finger and thumb. Once this is
done weld this new island to the arm at the wrist
UVs (Fig.35).

www.3dcreativemag.com

page 89

Issue 077 January 2012

Chapter 4 Unwrapping
Next, tackle each finger individually. Apply a
planar projection to the underside then spread

Swordmaster 2

Fig 36

out the UVs manually for the topside islands.

Once you are happy with their layout, weld them
to the main island consisting of the hand and
arm (Fig.36).

Finally merge the models together, access their

UVs, and begin organizing all of the islands into

Fig 37

the working 1:1 region of the UV Editor. There

is no hard and fast rule as to how things are laid
out other than trying to keep the density of each
piece equal. Try to line up elements as they are
in 3D space so that they can be easily read. A
good example of this is the positioning of the leg
armor pieces being next to each other and the
pelvis being located under the torso (Fig.37).

Unwrapping the weapons is fairly

straightforward. Put them on a separate sheet

Fig 38

as, in a game, they could be swapped out

for other models, need different effects or
limitations on them and allow for better asset
management. For the most part split each
weapon down the middle, like the helmet, and
modify a planar projection to try and keep the
UVs as solid islands (Fig.38).

Gavin Goulden
For more from this artist visit:
http://www.gavimage.com/
Or contact him at:
[email protected]

www.3dcreativemag.com

page 90

Issue 077 January 2012

OUT NOW!

2dartist

3DTotal presents the new issue of

magazine: a downloadable monthly magazine for
concept art, digital & matte painting for only

2.75 (approx $3.78 - 2.93)

Concept Art, Digital & Matte Painting Magazine

Issue 072 December 2011

Interview
A.J Trahan

Articles

Sketchbook of John Park

The Gallery

Roarti, Serge Birault

and Andreas Rocha, plus more!

We get an exclusive behind the scenes look at Atomhawk

Designs wonderfully epic future project Realm.

Illustrating Fairy Tales

In this months installment of Illustration Fariy Tales Simon Dominic

Brewer shows us how to paint the tale of Rapunzel.

Creating New Worlds

David Smit and Nadia Karroue continue their cool series by showing us
how they tackle the illustrations of their new world.

Character Portrayal

In the final chapter of our Charcter Portrayal series Irvin Rodriguez

tshows us how to paint a tatooed character.

www.2dartistmag.com

visit
to download the free
lite issue, the full issue, subscription offers and to purchase back
issues.

Chapter 1 | October Issue 074

Base model

Chapter 2 | November Issue 075

Sculpting

Chapter 3 | December Issue 076

Low Poly Model

Chapter 4 | This Issue

Unwrapping

Chapter 5 | Next Issue

Texturing

Chapter 6 | March Issue 079

Rendering

Swordmaster 2

Chapter 4 Unwrapping

Fig 01

Software used: Maya

Introduction
In this chapter we will be covering the creation
of a UV map for our character. A nice, clean
unwrap is usually an overlooked part of the
process that is extremely important to our final
product. With a well laid out UV map you can
benefit the most from texture resolution and
cleaner texture bakes when creating Normal and
Ambient Occlusion maps.
To begin, analyze what parts of your low poly
mesh can be unwrapped once and mirrored
for optimal UVs. In earlier steps we covered
instancing objects for this reason, such as the

Fig 02

bullets and shoulder pad panels. In an ideal

world everything would be unique and have
finer details to create asymmetrical detail, but
given modern day standards it is wise to mirror
sections that are not focus points and leave
asymmetrical detail to larger, iconic pieces. For
this character I suggest mirroring the limbs, half
of the shoulder pads and the helmet, leaving the
chest and face as fully unique objects (Fig.01).
Create a standard material and assign a
checker board pattern texture to the Diffuse slot.
Using a checker pattern is a great way to make
sure that all of the elements in your UV map
are taking up the correct amount of space. For
example, seeing many tiny squares on the chest

Fig 03

and only a few large squares on the arm can tell

you that you need to devote more UV space to
the arm, or less to the chest, to make them more
equal. This is important during texturing as you
will want an even texel density along the mesh
to make sure details are at the same scale.
In Maya, access the Material Editor by
navigating to Rendering Editors > Hypershade.
Select a shader ball or create a new one and
navigate to the materials properties. From
here click on the button next to Color and
choose Checker from the list. Once this is done

www.3dcreativemag.com

page 93

Issue 077 January 2012

Chapter 4 Unwrapping
properties will be available to you so that you
can alter the checkers appearance. I usually

Swordmaster 2

Fig 04

just stick with the normal black and white

checkers and set the tiling to 25 x 25. Having
more checkers visible to you just makes it easier
to visualize the real estate each piece of the
mesh is taking up, and having equal U and V
tiles ensures that the checkers will be square.
Once the shader is set up, select all of the
objects in the scene and assign the new checker
material to them (Fig.02).
Grab the visor and begin creating UVs for
the model by first navigating to Window > UV
Texture Editor, which will allow you to visualize
and access the models UVs and begin applying
projections to the model by navigating to Create
UVs and selecting a projection. Based on the

Fig 05

appearance of the checkers you can see that

there will be some distortion along the edges of
the visor. In the UV editor grab these UVs and
pull them left or right. Make sure that Constant
Update (located in the Options) is enabled to
immediately see these changes in real time.
Other tools like Pelt (known in Maya as Unfold)
and Relax can be accessed through either the
Polygons tab in the UV Editor or in Edit UVs
(Fig.03).
Up next is the face. After applying the modifier
grab all of the faces and assign a simple planar
projection to the model. This will cause some

Fig 06

significant distortion towards the edge of the

face and the sides of the nose, but will give us a
solid starting point (Fig.04).
From here apply a Pelt map to the model. This
will be based off of the boundaries that we had
already set in the previous step as Pelt maps
are general UV island based. If the initial result
isnt perfect there is no need to worry. Select
the UVs that you would like to adjust even if it
is all of them and apply Relax . This will average
out the space between UVs and save a lot of
tedious work by eliminating the need to adjust
each UV manually (Fig.05).

www.3dcreativemag.com

page 94

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 07

Since we have split the helmet down the

middle, unwrapping it is fairly easy. By applying
a Pelt map to the model and relaxing a few of
the trouble areas, we get a fairly clean and easy
to read image of our helmets shell (Fig.06).
The helmets antennas are a bit more
complicated as there are extrusions that simply
cant be connected to the main UV island. This
is a good example of the need to find natural UV
seams in your model that will be hidden from the
viewer and/or easy to paint over in the texturing
process. To start it off, select all of the faces
in the base of the antenna and apply a Planar
map. Grab all of the unrelated faces, the ones
belonging to the antenna itself, and move them

Fig 08

aside (Fig.07).
From here, either relax the UVs of the island or
grab the outer edge UVs, expand the selection
scale, shrink the selection each time and repeat
the process. This is a manual way of spreading
out the UVs and making sure the original shape
of the island remains intact (Fig.08).

To finish the helmet grab the face of each plane

Fig 09

on the antenna and apply a planar projection

www.3dcreativemag.com

page 95

Issue 077 January 2012

Chapter 4 Unwrapping
Next we will tackle the torso. At this stage split
the body down the middle, unwrap half of it,

Swordmaster 2

Fig 10

mirror a duplicate of the model and stitch it

Fig 11

cage and apply another planar projection that

will break these UVs off from the main island
and give them a cleaner unwrap (Fig.11).

Next line up the rib cage plane as best as

possible to the chest and stomach sections.

Fig 12

Once you are happy with the positioning, weld

www.3dcreativemag.com

page 96

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 13

Once you are happy with the chest you basically

Fig 14

Once the model is complete, access the UVs

Fig 15

the island. Because we have a well-defined UV

boundary the result should be a fairly clean oval
type shape. If needed you can relax some UVs
or manually push out the outer edges (Fig.15).

www.3dcreativemag.com

page 97

Issue 077 January 2012

Chapter 4 Unwrapping
Moving over to the left shoulder pad you
basically repeat the process. First break off the

Swordmaster 2

Fig 16

underside of the shoulder pad and pelt map the

top half, relaxing or manually tweaking problem
areas to fix texture distortion (Fig.16).

The dividing panel between the halves of the

Fig 17

left shoulder pad is fairly easy to handle. Simply

apply a planar projection and adjusted the top
and bottom UVs for more even pixel distribution
(Fig.17).

For the forearm armor it is more or less the

same situation as the shoulder pads. To begin,

Fig 18

grab the underside and apply a simple Planar

map. Because the tabs of the forearm armor
are connected, they may need to be manually
adjusted (Fig.18).

Next apply a Pelt map to the top side of the

armor plate and relax or manually adjust the

Fig 19

UVs where needed (Fig.19).

www.3dcreativemag.com

page 98

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 20

The cape is fairly easy to take care of. Simply

make two planar islands, one for the flap covering
the back and one for the ring that goes around
the shoulders. Once this is done grab both
islands and weld their UVs together. Since the
cape has a slight flare dont bother straightening
out the edges as it could cause the capes UVs to
become distorted (Fig.20).

Fig 21

Up next is the belt. This is a pretty simple planar

object. Take the time to straighten out the vertical
and horizontal edges, again to make the UVs
easier to pack in the final map and to make the
object easier to read in 2D space. Weld the back
of the belt to the main island to avoid a seam on
the top of the belt (Fig.21).
For the ammo apply a cylindrical projection to
just one of them and rotate/move the projection
controller as needed to get the final result, which
should leave the UV seam at the back of the

Fig 22

ammo. Also split the top and bottom off into

planar projections, but dont bother welding them
to the main island as only one edge would be
welded, leaving the rest exposed, and it is easier
to manage one rectangle and two circles than it
is one larger awkward shape. Youll notice that
by changing the UVs of one ammo model, all of
them should be updated due to the fact that they
are instanced copies (Fig.22).

Fig 23

For the belt clip apply a planar projection to each

piece and weld them together following the path
of least resistance. In my case I choose to have
a seam on the top and bottom of the model over
the distortion created by compensating for the
curve in the geometry (Fig.23).

www.3dcreativemag.com

page 99

Issue 077 January 2012

Chapter 4 Unwrapping
The pelvis armor is similar to the torso piece
we covered earlier. Split the model in half and

Swordmaster 2

Fig 24

apply planar projections to the front, side and

Moving on to the leg armor, assign a cylindrical

projection to the model. After adjusting the

Fig 25

projection to make the seam on the inner leg,

Next grab the strips making up the inner leg

seam and apply planar projections to them.

Fig 26

Once this is done weld them to the main island

we previously created and begin, relaxing and
tweaking UVs to make the layout as clean as
possible (Fig.26).

www.3dcreativemag.com

page 100

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 27

Once the leg UV unwrap is looking good move

Fig 28

Repeat the process for the other half of the

angular details. The shapes are not symmetrical
so you dont need to unwrap each one as a
unique object (Fig.28).

For the knee area, which is our organic element

Fig 29

that will enable us to bend the leg naturally, use

a simple cylindrical projection, favoring the inner
leg for a seam location (Fig.29).

www.3dcreativemag.com

page 101

Issue 077 January 2012

Chapter 4 Unwrapping
Next up is the lower leg armor. Follow the same
technique as in the earlier steps. Analyze the

Swordmaster 2

Fig 30

mesh and determine how to break it up by

planes and where to leave the UV seam. Split
the mesh into three planes, basically the front
and two sides, leaving the seam towards the
back of the calves where the armor plates meet
(Fig.30).

Moving on to the boot model, first grab the

bottom of the foot and give it a planar projection.

Fig 31

This helps split these UVs off from the main

island of UVs that we will be working with and,
since the bottom of a characters feet are rarely
seen, can be given less real estate if needed
(Fig.31).

Next grab the top side of the foot and apply a

planar projection, which essentially splits the

Fig 32

model in half. Grab the two halves, which should

www.3dcreativemag.com

page 102

Issue 077 January 2012

Swordmaster 2

Chapter 4 Unwrapping
Fig 33

Once you are happy with all three elements,

weld the top side of the foot to both halves and
leave the seam of the foot near the sole and at
the back of the boot near the ankle (Fig.33).

Fig 34

Moving over to the arm and hand, grab the

Next split the finger and thumb UVs from the

Fig 35

hand and move them aside. Grab the top of

www.3dcreativemag.com

page 103

Issue 077 January 2012

Chapter 4 Unwrapping
Next, tackle each finger individually. Apply a
planar projection to the underside then spread

Swordmaster 2

Fig 36

out the UVs manually for the topside islands.

Once you are happy with their layout, weld them
to the main island consisting of the hand and
arm (Fig.36).

Finally merge the models together, access their

UVs, and begin organizing all of the islands into

Fig 37

the working 1:1 region of the UV Editor. There

Unwrapping the weapons is fairly

straightforward. Put them on a separate sheet

Fig 38

as, in a game, they could be swapped out

Gavin Goulden
For more from this artist visit:
http://www.gavimage.com/
Or contact him at:
[email protected]

www.3dcreativemag.com

page 104

Issue 077 January 2012

3DTotal About us

Is a resource website for the CG community;

amongst our growing number of products for CG
artists, we produce two monthly downloadable
PDF magazines 2DArtist and 3DCreative.
We are based in the West Midlands, in the UK,
and our intention with our magazines is to make
each issue as full of great articles, images,
interviews and tutorials as possible. If you
would like more information on 3DTotal or our
magazines, or if you have a question for one our
team, please use the links below.

Contact Information
http://www.3dtotal.com
http://www.3dcreativemag.com
http://www.2dartistmag.com
Editor & Content Manager > Simon Morse
[email protected]
Lead Designer > Chris Perrins
[email protected]
Marketing > Tom Helme
[email protected]

Partners
If you have a CG community website and would
like to support 3DCreative and/or 2DArtist
magazine by showing our banners, please
contact Lynette Clee at the email address above

www.3dcreativemag.com

page 105

Issue 077 January 2012

3 D Creative
No ratings yet
3 D Creative
169 pages
3DCreative Issue 091
100% (1)
3DCreative Issue 091
83 pages
3DCreative 2011-08S370
100% (1)
3DCreative 2011-08S370
84 pages
2DArtist Issue 057 Sep10
No ratings yet
2DArtist Issue 057 Sep10
92 pages
3DCreative #10 - October 2009
No ratings yet
3DCreative #10 - October 2009
136 pages
3DCreative 049 2009-09
No ratings yet
3DCreative 049 2009-09
95 pages
3DCreative Issue 120 Aug15 Lowres PDF
100% (4)
3DCreative Issue 120 Aug15 Lowres PDF
129 pages
2DArtist Issue 037 Jan09 HR
No ratings yet
2DArtist Issue 037 Jan09 HR
105 pages
3D Creative Magazine - January 2009
100% (3)
3D Creative Magazine - January 2009
110 pages
2DArtist Issue 054 Jun10
50% (2)
2DArtist Issue 054 Jun10
95 pages
2DArtist - Issue 080 - 2012-08
100% (4)
2DArtist - Issue 080 - 2012-08
0 pages
2D Artist Issue 037
100% (1)
2D Artist Issue 037
48 pages
3DCreative Issue 060 Aug10 Highres
No ratings yet
3DCreative Issue 060 Aug10 Highres
137 pages
CGArena Vol 6: Interviews & CG Art
100% (1)
CGArena Vol 6: Interviews & CG Art
70 pages
3DCreative Issue 053 Jan10 Lite
No ratings yet
3DCreative Issue 053 Jan10 Lite
41 pages
2DArtist Issue 003 Mar06
No ratings yet
2DArtist Issue 003 Mar06
93 pages
2DArtist Issue 011 Nov06
No ratings yet
2DArtist Issue 011 Nov06
100 pages
3DCreative - May 2011-TV
100% (3)
3DCreative - May 2011-TV
92 pages
CGArena Aug-Sep 2010: Interviews & 3D Art
100% (1)
CGArena Aug-Sep 2010: Interviews & 3D Art
72 pages
3DCreative Issue 125
100% (1)
3DCreative Issue 125
103 pages
2DArtist Issue 029 May08
No ratings yet
2DArtist Issue 029 May08
152 pages
3DCreative Issue 002 Oct05
100% (7)
3DCreative Issue 002 Oct05
70 pages
2DArtist Issue 002 Feb06
No ratings yet
2DArtist Issue 002 Feb06
94 pages
Concepteez Mag Issue 2 by Concepteez-D4ftfex
No ratings yet
Concepteez Mag Issue 2 by Concepteez-D4ftfex
53 pages
2DArtist Magazine Issue 072 December 2011
No ratings yet
2DArtist Magazine Issue 072 December 2011
104 pages
3D World - Christmas 2014
100% (2)
3D World - Christmas 2014
100 pages
Artist: Interviews Tutorials Making Ofs Galleries
No ratings yet
Artist: Interviews Tutorials Making Ofs Galleries
67 pages
Galleries: New Section: Image Making Of's Underworld: Evolution
No ratings yet
Galleries: New Section: Image Making Of's Underworld: Evolution
31 pages
2d.artist - Nov.2007.high Resolution - PDF CZONE
100% (5)
2d.artist - Nov.2007.high Resolution - PDF CZONE
145 pages
2DArtist Issue 002 Feb06 Lite
No ratings yet
2DArtist Issue 002 Feb06 Lite
34 pages
3D Artist Magazine - Create Realistic Wet & Dry Fur (Issue No. 9)
100% (3)
3D Artist Magazine - Create Realistic Wet & Dry Fur (Issue No. 9)
109 pages
2D Artist Issue 046
100% (1)
2D Artist Issue 046
112 pages
2DArtist Issue
100% (3)
2DArtist Issue
139 pages
Freestyle Character Design ImagineFX Tutorial PDF
No ratings yet
Freestyle Character Design ImagineFX Tutorial PDF
5 pages
Advanced Photoshop Issue 063
No ratings yet
Advanced Photoshop Issue 063
88 pages
Cgarena Dec-Jan11 Magazine
100% (1)
Cgarena Dec-Jan11 Magazine
71 pages
3D Creative 066
100% (1)
3D Creative 066
94 pages
2DArtist Magazine Issue 014 February 2007
No ratings yet
2DArtist Magazine Issue 014 February 2007
115 pages
2DArtist Issue 062 Feb 2011
100% (6)
2DArtist Issue 062 Feb 2011
77 pages
2DArtist - January 2017 PDF
100% (6)
2DArtist - January 2017 PDF
146 pages
2DArtist Issue 102 Jun2014
100% (4)
2DArtist Issue 102 Jun2014
113 pages
ImagineFX March 14 Issue 106 - My Favourite Magazines
0% (1)
ImagineFX March 14 Issue 106 - My Favourite Magazines
2 pages
Cgarena Oct06 Ezine
No ratings yet
Cgarena Oct06 Ezine
39 pages
3D World - December 2024 UK
No ratings yet
3D World - December 2024 UK
100 pages
Digital Art Live - February 2019 PDF
100% (2)
Digital Art Live - February 2019 PDF
76 pages
Concept Art Tutorial PDF
No ratings yet
Concept Art Tutorial PDF
5 pages
CG Artistry Insights & Techniques
100% (2)
CG Artistry Insights & Techniques
76 pages
3DCreative Issue 008 Apr06 Lite
No ratings yet
3DCreative Issue 008 Apr06 Lite
43 pages
3DCreative Issue 97 - September 2013
100% (1)
3DCreative Issue 97 - September 2013
127 pages
3DCreative - Issue 111 November 2014
100% (1)
3DCreative - Issue 111 November 2014
121 pages
2DArtist June 2016
100% (3)
2DArtist June 2016
126 pages
Image FX
100% (1)
Image FX
101 pages
3DCreative Issue 050 Oct09 Lite
No ratings yet
3DCreative Issue 050 Oct09 Lite
38 pages
Digital Art & 3D Sculpting Insights
100% (2)
Digital Art & 3D Sculpting Insights
80 pages
3D World 316 2024 10
No ratings yet
3D World 316 2024 10
100 pages
3DWorld201310 PDF
50% (2)
3DWorld201310 PDF
100 pages
3D World - 2014-07
100% (2)
3D World - 2014-07
100 pages
3D World UK - Issue 303, 2023
100% (1)
3D World UK - Issue 303, 2023
100 pages
SFTI Zbrush James Cain PDF
No ratings yet
SFTI Zbrush James Cain PDF
13 pages
3D-World Christmas-2013 Preview PDF
0% (1)
3D-World Christmas-2013 Preview PDF
10 pages
Zernicki AES153 Thecomputationalcomplexityofobject basedaudioOBAandvolumetricscene basedaudioVSBA
No ratings yet
Zernicki AES153 Thecomputationalcomplexityofobject basedaudioOBAandvolumetricscene basedaudioVSBA
10 pages
GeoServer Speed Optimization Guide
No ratings yet
GeoServer Speed Optimization Guide
77 pages
3D World August 2019 Issue 249
No ratings yet
3D World August 2019 Issue 249
100 pages
LUMION 6 - Quickstart Guide
No ratings yet
LUMION 6 - Quickstart Guide
10 pages
Hey Friends Here Are List of Books Which Might Be Helpful For U All
No ratings yet
Hey Friends Here Are List of Books Which Might Be Helpful For U All
7 pages
Madan Mohan Reddy Kandula: Objective Education
No ratings yet
Madan Mohan Reddy Kandula: Objective Education
3 pages
Corona For C4D PDF
0% (1)
Corona For C4D PDF
21 pages
Simulation and Application of Urban Intersection Traffic Flow Model
No ratings yet
Simulation and Application of Urban Intersection Traffic Flow Model
8 pages
Ci500588j DataWarrior 2D Rubberband Scaling
No ratings yet
Ci500588j DataWarrior 2D Rubberband Scaling
15 pages
Archinteriors Vol 30
No ratings yet
Archinteriors Vol 30
10 pages
Revit Keyboard Shortcuts, Hotkeys & Commands Guide - Autodesk
No ratings yet
Revit Keyboard Shortcuts, Hotkeys & Commands Guide - Autodesk
15 pages
Prompts For Leonardo AI
No ratings yet
Prompts For Leonardo AI
19 pages
AUTO CAD-2006: (2-D Commands)
No ratings yet
AUTO CAD-2006: (2-D Commands)
19 pages
Department of Computer Science and Engineering Kathmandu University Dhulikhel, Kavre
No ratings yet
Department of Computer Science and Engineering Kathmandu University Dhulikhel, Kavre
3 pages
Templat Kosong PKPA Myportfolio - A4
No ratings yet
Templat Kosong PKPA Myportfolio - A4
25 pages
GPU Pro 5 PDF
100% (2)
GPU Pro 5 PDF
524 pages
2D Graphics Line Drawing Guide
No ratings yet
2D Graphics Line Drawing Guide
57 pages
Project Computer Graphics
0% (2)
Project Computer Graphics
18 pages
Blender 3D Software Features Guide
No ratings yet
Blender 3D Software Features Guide
3 pages
Viewport Clipping
No ratings yet
Viewport Clipping
4 pages
Snek
No ratings yet
Snek
9 pages
Expressive Gaussian Human Avatars From Monocular RGB Video
No ratings yet
Expressive Gaussian Human Avatars From Monocular RGB Video
12 pages
7th Sem New Syllabus
No ratings yet
7th Sem New Syllabus
19 pages
Computer Graphics & Python Project
No ratings yet
Computer Graphics & Python Project
12 pages
3D Lighting Techniques Guide
100% (9)
3D Lighting Techniques Guide
84 pages
Research and Development of 3D Modeling: Xi-Dao LUAN, Yu-Xiang XIE, Long YING and Ling-Da WU
No ratings yet
Research and Development of 3D Modeling: Xi-Dao LUAN, Yu-Xiang XIE, Long YING and Ling-Da WU
5 pages
HitFilm Express 2017 User Guide
100% (2)
HitFilm Express 2017 User Guide
314 pages
Nowhere - A Kinetic Typography Motion Graphic About The Pursuit of
No ratings yet
Nowhere - A Kinetic Typography Motion Graphic About The Pursuit of
43 pages
Bimncad 3DS Max Syllabus 1 PDF
100% (1)
Bimncad 3DS Max Syllabus 1 PDF
4 pages
Lighting Visualization Mastery
100% (4)
Lighting Visualization Mastery
66 pages