TECHNICAL DATA AND INFORMATION
114 kW/153 hp
22.0 - 23.5 t
MHL331D
RECYCLING MACHINE
up to 12.0 m
TECHNICAL DATA MHL331 D
OPERATING WEIGHT
22.0 - 23.5 t
DIESEL ENGINE
MANUFACTURER AND MODEL
Deutz TCD 2012 L06 2V
DESIGN
6-cylinder inline
ENGINE CONTROL
EMR III
TYPE
4-stroke diesel, common rail direct injection, turbo-charger w. charge air cooling
ENGINE OUTPUT
114 kW/153 hp
NOMINAL SPEED
2000 min-1
DISPLACEMENT
6.0 liters
COOLING SYSTEM
Liquid intercooling with temperature-controlled fan speed
EMISSION STANDARDS
COM III and EPA Tier III
AIR FILTER DESIGN
Two-stage filter with safety valve
FUEL CAPACITY (USABLE)
300 l
ELECTRICAL SYSTEM
OPERATING VOLTAGE
24 V
BATTERIES
2 x 12 V / 100 Ah / 760 A (in accordance with EN)
LIGHTING SET
1 x H3 spotlights on upper carriage, 1 x H3 spotlights on cabin floor,
turn signal and rear side-marker lamps
OPTION
Magnet system 13 kW
TRAVEL DRIVE
Hydrostatic drive through infinitely variable axial piston motor and directly mounted travel brake
valves, two-speed power shift gear, 4-wheel drive
TRAVEL SPEED 1ST GEAR
max. 5 km/h (3.1 mph)
TRAVEL SPEED 2ND GEAR
max. 20 km/h (12.4 mph)
GRADEABILITY
max. 50%
TURNING RADIUS
7.0 m
SWING SYSTEM
RING GEAR
Internally toothed ball ring gear (double row)
DRIVE
Two-stage planetary gear with integrated multi-disc brake
UPPER CARRIAGE SWING SPEED
Infinitely variable from 0 - 8 min-1
PIVOT BRAKE
Electrically operated
MAX. PIVOT TORQUE
49 kNm
UNDERCARRIAGE
FRONT AXLE
Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle: 28
REAR AXLE
Oscillating planetary drive rear axle with integrated drum brake and
selectable oscillating axle lock
STABILIZERS
4-point-stabilizers
TIRES
Solid rubber, elastic tires 8-fold 9.00 - 20
BRAKE SYSTEM
02
SERVICE BRAKE
Hydraulic single-circuit braking system acting on all four wheel pairs
PARKING BRAKE
Electrically operated disc brake at transmission, acting on both front and rear axle
HYDRAULIC SYSTEM
REXROTH mobile hydraulic system with load limit control, and fuel conserving power
demand control. Separate oil cooler, temperature-controlled fan speed.
Hydraulic oil filter: integrated in the oil tank; maintenance interval: 3000 operating hrs.
Central lubrication system.
MAX. PUMP CAPACITY
380 l/min
MAX. OPERATING PRESSURE
320/360 bar
HYDRAULIC OIL TANK
340 l
OPERATORS CAB
Cab: elastically supported, infinitely variable hydraulically height-adjustable with max. eye level
of 5.2 m. Sound-deadened, heat-insulated panoramic windows for optimum all-around view,
windshield with pull-down sunblind that slides under cab roof, visibility panel in cab roof, sliding
window in cab door, steering column height and tilt adjustable.
HEATING
Infinitely variable hot water heating with 3-speed fan, 4 adjustable defroster nozzles
OPERATORS SEAT
Air-cushioned comfort-seat with integrated headrest, safety-belt and lumbar support, seat-heating
with integrated a/c function optional. Seat position, seat inclination and seat cushion multi-adjustable in line with position of armrests and pilot control units, allowing fatigue-free operation.
MONITORING
Ergonomic instrument layout, glare-free. Function monitoring; automatic warning and storage
of deviating operating conditions, e.g. filter pressure w. warning indicator and shutdown of
pilot controls, warning indicator or shutdown of pilot controls when exceeding hydraulic oil
temperature limits.
AIR CONDITIONING
Automatic
ACOUSTIC POWER LEVEL
(guaranteed) in accordance with guideline 2000/14 EG
LW(A) = 102 dB(A)
SAFETY INSTALLATIONS
For crane operations in accordance with EN 474-5.
Cab protection by close proximity range limiter.
OFFICIAL HOMOLOGATION
Certification according to CE-regulations.
03
EQUIPMENT MHL331 D
ENGINE
SERIES
OPTION
CAB
Turbocharger
Lift-up skylight in cabin roof
Intercooling
Direct electronic fuel injection/
Common Rail
Air cushioned operators seat with
headrest, safety belt and lumbar support
Automatic idle
Engine pre-heating
OPTION
FOPS protective grating
Front/roof protective grating
Interface for engine diagnosis
Temperature-controlled fan drive
UNDERCARRIAGE
SERIES
2-speed power-shift transmission
4-point stabilizers
4-pt. stabiliziers, individually controllable
Hinged front windshield
OPTION
Front windows break-resistant (LEXAN)
Bullet-proof safety glass, front and top
Cab elevation system, height adjustable
Air conditioning
Steering column, height and tilt adjustable
Multi-functional display
Outrigger cylinders with integrated
two-way check valves
Fire extinguisher, dry powder
All-wheel drive
Preparation for radio
Piston rod protection on the outrigger
cylinders
Radio cassette
Outrigger plates 500 x 350
RadioCD
Rear axle oscillating lock
Rotating beacon
Dozer blade in addition to 4-pt. stabilizers
Sliding window in cab door
Special paint
Safety glass
Drum brakes
Tool box
All-wheel steering
UPPER CARRIAGE
l
SERIES
OPTION
Electrical refueling pump
Lighting protection
Maintenance hood, actuated by gas strut,
with mechanical locking device
Lockable cleaning access openings on
radiator
Separate radiator system for ambient
temperatures up to 50 C
Separate oil cooler w. temperaturecontrolled fan drive
Automatic central lubrication system
Seat heating with integrated a/c function
Engine-independent heating
Windscreen washer system
Dust protection system
Pressurized cabin system
EQUIPMENT
SERIES
Floodlights attached to cab floor
Floodlights, mounted to superstructure
OPTION
Floodlight, stick mounted
Hydraulic oil preheating
Close proximity range limiter for stick
l
l
Reversing device
Coolant and hydraulic oil level
monitoring system
Special paint
Hose rupture protection for lift cylinder
Hose rupture protection for stick cylinder
Quick-drain valve for fuel tank
(delivered in tool box)
Quick-drain valve on hydraulic oil tank
Quick-drain valve on radiator
Quick-drain valve on engine oil-pan
Reversible fan for radiator and
hydraulic oil cooler
Dipper stick shock protection
Lubrication of the grab suspension by
central lubrication system
Overload protection/ shutdown
XENON floodlight on stick
XENON-floodlight on superstructure
XENON floodlight on cab roof
Quick-connect coupling on stick
Tool filter system
04
SERIES
l
l
DIMENSIONS
1250
2250
2550
3195
3415
with protective grating for cab roof
MHL331 D
2595
2485
2500
4830
1400
2450
2500
2740
3660
4010
MHL331 D
Transport dimensions
D
DIMENSIONS
REACH 10.7 m
(MULTI-PURPOSE STICK)
REACH 11.0 m
REACH 12.0 m
10.000 mm
9.950 mm
9.900 mm
5.140 mm
5.250 mm
4.280 mm
1.300 mm
1.300 mm
1.300 mm
3.195 mm / *3.415 mm
3.195 mm / *3.415 mm
3.195 mm / *3.415 mm
2.700 mm
2.650 mm
3.100 mm
* with protective grating for cab roof
05
WORKING RANGES/LIFTING CAPACITIES MHL331 D
12
Reach 11 m
with stick
11
Work equipment:
Box-type boom 6.5 m;
Stick 4.4 m;
Cactus grab
10
9
8
7
6
5
4
3
2
1
0
-1
-2
Center of rotation
-3
-4
-5
13
12
11
10
3Reach in m
06
HEIGHT
UNDERCARRIAGE
STABILIZERS
10.5
7.5
4.5
1.5
-1.5
REACHES m
4.5
non supported
(5.2)
4-pt. supported
5.6* (5.6*)
7.5
non supported
(5.3)
(3.6)
4-pt. supported
6.3* (6.3*)
5.6* (5.6*)
non supported
(5.2)
(3.7)
(2.7)
4-pt. supported
6.4* (6.4*)
5.7 (5.8*)
4.2 (4.9*)
non supported
(5.1)
(3.6)
(2.6)
4-pt. supported
6.8* (6.8*)
5.6 (6.0*)
4.2 (5.2)
10.5
non supported
(7.5)
(4.8)
(3.4)
(2.6)
(2.0)
4-pt. supported
9.6* (9.6*)
7.6* (7.6*)
5.5 (6.4*)
4.1 (5.1)
3.2 (4.0)
non supported
(6.8)
(4.5)
(3.3)
(2.5)
(2.0)
4-pt. supported
11.6* (11.6*)
7.4 (8.5*)
5.3 (6.6)
4.0 (5.0)
3.2 (3.9)
non supported
(6.2)
(4.2)
(3.1)
(2.4)
(1.9)
4-pt. supported
10.1* (10.1*)
7.1 (9.0)
5.1 (6.4)
3.9 (4.9)
3.1 (3.9)
non supported
(5.9)
(4.0)
(3.0)
(2.3)
(1.9)
4-pt. supported
7.0* (7.0*)
3.1 (3.9)
6.8 (8.8)
5.0 (6.2)
3.8 (4.8)
non supported
(3.9)
(2.9)
(2.3)
4-pt. supported
6.8 (8.7)
4.9 (6.2)
3.8 (4.7)
RECOMMENDED ATTACHMENTS
LIFT HOOKS
10 t
TEREX FUCHS
CACTUS GRAB 0.4 m3
Open or half-closed shells
TEREX FUCHS
CACTUS GRAB 0.6 m3
Open or half-closed shells
GRAB FOR LIGHTWEIGHT
MATERIALS 0.8 m3
Loose goods density up to
1400 kg/m3
MAGNET SYSTEM
Terex Fuchs magnetic plate
Capacity values are stated in metric tons (t). The pump
pressure is 360 bar (5221 psi). The values, in accordance
with ISO 10567, amount to 75% of the static tipping load
or 87 % of the hydraulic lifting force (marked *). They
apply to slewing operations through 360 on a firm and
level surface. Values in brackets apply to the longitudinal
direction of the undercarriage. Non-supported values
only apply when the load is hoisted above the front or
rear axle. The weight of the attached hoisting equipment
(grab, magnet, load hook) must be deducted from the
capacity values. In accordance with CE guidelines, hoserupture safety valves on the lift cylinders and an overload
warning device are required for crane operations.
07
WORKING RANGES/LIFTING CAPACITIES MHL331 D
13
Reach 12 m
with stick
12
Work equipment:
Box-type boom 6.5 m;
Stick 5.45 m;
Cactus grab
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
Center of rotation
-4
-5
-6
14
13
12
11
10
3Reach in m
0 8
HEIGHT
UNDERCARRIAGE
STABILIZERS
10.5
7.5
4.5
1.5
-1.5
-3
REACHES m
4.5
7.5
non supported
(3.7)
4-pt. supported
4.3* (4.3*)
non supported
(3.8)
(2.8)
4-pt. supported
5.1* (5.1*)
4.0* (4.0*)
10.5
non supported
(3.8)
(2.8)
(2.1)
4-pt. supported
5.1* (5.1*)
4.3 (4.8*)
3.1* (3.1*)
non supported
(3.7)
(2.7)
(2.1)
3.3 (4.1)
4-pt. supported
5.3* (5.3*)
4.3 (4.9*)
non supported
(5.1)
(3.6)
(2.6)
(2.0)
4-pt. supported
6.6* (6.6*)
5.6 (5.8*)
4.2 (5.2*)
3.3 (4.0)
12
non supported
(7.3)
(4.7)
(3.4)
(2.5)
(2.0)
(1.5)
4-pt. supported
10.0* (10.0*)
7.6* (7.6*)
5.4 (6.3*)
4.1 (5.0)
3.2 (4.0)
2.6 (3.1*)
non supported
(6.5)
(4.3)
(3.1)
(2.4)
(1.9)
(1.5)
4-pt. supported
11.5 (12.1*)
7.2 (8.7*)
5.2 (6.5)
3.9 (4.9)
3.1 (3.9)
2.6 (3.1*)
non supported
(6.1)
(4.1)
(3.0)
(2.3)
(1.9)
4-pt. supported
9.2* (9.2*)
6.9 (8.8)
5.0 (6.3)
3.8 (4.8)
3.1 (3.8)
non supported
(5.8)
(3.9)
(2.9)
(2.2)
(1.8)
4-pt. supported
7.4* (7.4*)
6.7 (8.6)
4.9 (6.1)
3.8 (4.7)
3.0 (3.8)
non supported
(2.8)
4-pt. supported
4.8 (6.1)
RECOMMENDED ATTACHMENTS
LIFT HOOKS
10 t
TEREX FUCHS
CACTUS GRAB 0.4 m3
Open or half-closed shells
GRAB FOR LIGHTWEIGHT
MATERIALS 0.6 m3
Loose goods density up to
1400 kg/m3
MAGNET SYSTEM
Terex Fuchs magnetic plate
Capacity values are stated in metric tons (t). The pump
pressure is 360 bar (5221 psi). The values, in accordance
with ISO 10567, amount to 75% of the static tipping load
or 87 % of the hydraulic lifting force (marked *). They
apply to slewing operations through 360 on a firm and
level surface. Values in brackets apply to the longitudinal
direction of the undercarriage. Non-supported values
only apply when the load is hoisted above the front or
rear axle. The weight of the attached hoisting equipment
(grab, magnet, load hook) must be deducted from the
capacity values. In accordance with CE guidelines, hoserupture safety valves on the lift cylinders and an overload
warning device are required for crane operations.
09
WORKING RANGES/LIFTING CAPACITIES MHL331 D
Reach 10.7 m
with multi-purpose
stick
14
13
12
Work equipment:
Box-type boom 6.5 m;
Stick 4.0 m;
Sorting grab
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
Center of rotation
-3
-4
-5
13
12
11
10
3Reach in m
10
HEIGHT
UNDERCARRIAGE
STABILIZERS
7.5
4.5
1.5
-1.5
REACHES m
4.5
7.5
non supported
(5.0)
(3.4)
4-pt. supported
6.4* (6.4*)
5.0* (5.0*)
non supported
(4.9)
(3.4)
(2.4)
4-pt. supported
6.4* (6.4*)
5.4 (5.7*)
4.0 (4.0*)
10.5
non supported
(7.7)
(4.8)
(3.3)
(2.4)
4-pt. supported
8.3* (8.3*)
6.8* (6.8*)
5.4 (5.9*)
3.9 (4.9)
non supported
(7.1)
(4.5)
(3.2)
(2.3)
4-pt. supported
9.8* (9.8*)
7.5 (7.6*)
5.2 (6.3*)
3.9 (4.8)
non supported
(6.4)
(4.2)
(3.0)
(2.2)
(1.7)
4-pt. supported
11.4 (11.8*)
7.1 (8.4*)
5.0 (6.3)
3.8 (4.7)
2.9 (3.7)
non supported
(5.8)
(3.9)
(2.8)
(2.1)
(1.7)
4-pt. supported
7.6* (7.6*)
6.8 (8.7)
4.8 (6.1)
3.7 (4.6)
2.9 (3.6)
non supported
(5.6)
(3.7)
(2.7)
(2.1)
4-pt. supported
6.3* (6.3*)
6.6 (8.5)
4.7 (6.0)
3.6 (4.5)
non supported
(2.7)
4-pt. supported
4.6 (5.9)
Capacity values are stated in metric tons (t). The pump pressure is 360 bar (5221 psi).
The values, in accordance with ISO 10567, amount to 75% of the static tipping load or
87% of the hydraulic lifting force (marked *). They apply to slewing operations through
360 on a firm and level surface. Values in brackets apply to the longitudinal direction
of the undercarriage. Non-supported values only apply when the load is hoisted
above the front or rear axle. The weight of the attached hoisting equipment (grab,
magnet, load hook) must be deducted from the capacity values. In accordance with
CE guidelines, hose-rupture safety valves on the lift cylinders and an overload warning
device are required for crane operations.
11
Terex Fuchs GmbH
D-76669 Bad Schnborn Germany
Tel.: +49 (0) 72 53/ 84-0 Fax: +49 (0) 72 53/ 8 41 11
Web: www.terex-fuchs.de Email:
[email protected]PURPOSE
BUILT
SIMPLE TO OPERATE.
VERSATILE IN USE.
MHL331 D. The talented all-rounder with turbo efficiency
With its versatility and almost legendary manoeuvring speed, the
MHL331 D really gets the recycling business moving. The robust
undercarriage provides a stable space when loads of several tons
need to be moved with a reach of up to 12 metres. In such situations it is essential that neither speed nor precision is compromised;
the slewing motor and slewing gear are designed with this in mind
and the lift and stick cylinders are fitted with special end-cushioning.
The MHL331 D incorporates the most up-to-date drive and cooling
technology. The separate cooling systems, consisting of a hydrostatically driven fan for the oil cooler and a visco-clutch driven fan
for liquid intercooling, combine excellent cooling power with quiet
performance, enabling the machine to be used at ambient temperatures of up to 50C. Optional features are available for use in sorting
sheds; these include smoke particle filters and a sealed cab with
pressurized cabin system.
The clean and quiet 114 kW/153 hp turbo
diesel engine with EMR-3 control meets
Tier III emissions standards (Com III/ EPA III);
noise and emissions when used indoors are
minimal. Ergonomics and safety are also high
on the Terex Fuchs list of priorities. The operator has perfect visibility and control, aided
by the height-adjustable cab with panoramic
windows and the modern function monitor
which makes comprehensive operating information available at a glance. Ergonomically
arranged controls and a back-friendly comfort seat are among the standard fittings.
MHL331 D valid from machine no. 1130. 05.2008-GB (1.5). Printed in Germany. For further information please contact your dealer or the Terex
Fuchs sales department. Terex Fuchs reserves the right to continually improve its products. Product specifications are subject to change without
notice or obligation. The photographs and drawings in this brochure are for illustrative purposes only. Refer to the appropriate Operators Manual
for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment, or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular product and sale. Terex Fuchs provides no undertakings beyond the expressly
agreed warranty conditions. Terex Corporation 2008 Terex is a registered trade mark of the Terex Corporation in the United States of America
and many other countries.
