The Easy Everything Bag
Featuring
Botanica
Fabric and Bag Designed by Jason Yenter
for
In The Beginning fabrics
Finished Bag Size: approx. 21" x 21" x 6"
Materials
yd. Cream Botanical Drawings (1BOT3) for
front and back of bag
1 yds. Light Green Diamond Grid (9BOT4) for
lining of bag
yd. Gold Floral Tonal (8BOT3) for sides,
bottom, and handles of bag
1 yds. fusible fleece (Pellon #987F or something
similar)
2. Place one 6" x 36" strip of fusible fleece, with the
fusible side up, on your ironing board. Place one
Gold Floral Tonal 6" x 36" strip, right side up, on
top of fusible fleece. Fuse together the Gold Floral
Tonal strip and fleece. In the same way, fuse together
the remaining 6" x 36" strip of fusible fleece, and
Gold Floral Tonal 6" x 36" strip.
3. Press one Gold Floral Tonal 3" x 26" strip in half
lengthwise, wrong sides together, to make a center
crease. Open strip.
Wrong side of fabric
Center crease
Cutting
From Cream Botanical Drawings, cut:
2 squares, 22" x 22", for front and back of bag
From Light Green Diamond Grid, cut:
2 squares, 22" x 22", for lining
2 strips, 6" x 36", for lining
With wrong side up, fold over and press " on each
long edge of strip.
"
From Gold Floral Tonal, cut:
2 strips, 6" x 36", for bag sides and bottom
2 strips, 3" x 26", for handles
From fusible fleece, cut:
2 squares, 22" x 22"
2 strips, 6" x 36"
2 strips, 1" x 26"
Assembly
All seams are " unless otherwise instructed. Backstitch
at beginning and end of seams to secure stitching.
1. Place one 22" square of fusible fleece, with the fusible
side up, on your ironing board. Place bag front, right
side up, on top of fusible fleece. Using a press cloth,
and following pressing instructions given with your
fusible fleece, fuse together the bag front and fleece.
In the same way, fuse together the bag back and
remaining 22" square of fusible fleece.
Place a 1" x 26" strip of fusible fleece (fusible side
down) on top of the Gold Floral Tonal strip (wrong
side up), with one long edge of the fleece next to the
center crease, and one long edge tucked under the "
fold of the Gold Floral Tonal strip.
Fleece
Refold the Gold Floral Tonal strip along the center
crease (with the fleece now sandwiched inside) and,
using your iron, fuse together the Gold Floral Tonal
strip and fleece.
Fold strip on center crease.
Repeat this sequence to fuse together the remaining
1" x 26" strip of fusible fleece, and Gold Floral
Tonal 3" x 26" strip.
4. Topstitch along each long edge of the two folded
strips made in Step 3. These will be the handles of
your bag.
8. With right sides facing, match the center seam line
of the long strip from Step 6 with the center bottom
edge of the bag front, and pin together at this point.
Working from the center toward corners, pin strip to
bag. When you are " from each corner, make one
snip in the strip only, going to (not through) the line
of stitching. This will allow the strip to turn easily at
the corner.
5. Sew together along one short edge, with right sides
facing, the 2 fused Gold Floral Tonal 6" x 36" strips
made in Step 2. Press seam open.
Bag Front
"
6. Machine stitch, with a regular stitch length, along
each long edge of the strip made in Step 5. Your line
of stitching should be just short of " from the strips
edge.
Snip strip only at
blue lines.
"
"
Turn each corner, and continue to pin the strip to
each side of the bag front, ending at the top of the
bag. Your strip should extend beyond the bag top.
The ends of the strip will be trimmed after sewing.
"
Bag Front
"
7. Find and mark with a pin, the center bottom edge of
the fused bag front.
"
Bag Front
"
9. Stitch strip to bag front. Starting at top of bag, sew
side seam. At corner, lift the presser foot (with the
needle still in the fabric), and pivot. After pivoting,
lower presser foot, and continue sewing to next
corner. Pivot as on the first corner, and sew the
remaining side seam.
Stitch strip to bag,
using " seams, as
indicated by red
stitching lines.
Backstitch at
beginning and end of
seam to secure.
Bag Front
"
"
15. Using a " seam allowance, sew bag and lining
together at top edge, leaving a 5" opening for
turning.
10
11
12
13
14
15
16
17
18
19
21
20
22
Leave opening for turning.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
23
10. Using an acrylic ruler and rotary cutter, trim ends of
strip even with top of bag.
Bag Front
Bag Front
16. Gently pull bag, right side out, through opening.
Tuck lining into the bag. Press top edge of bag, and
pin the 5" opening closed.
17. Edge-stitch around the top of bag.
11. Repeat Steps 7-9 to sew the bag back to the bag
front/side section just made.
12. To make bag lining, repeat steps 5-11, this time using
Light Green Diamond Grid lining pieces. (Note:
Fusible fleece isnt used with the lining pieces.)
13. On the top edge of the bag front, measure in 5" from
each side, and pin (raw edges matching) one handle
to the bag as shown. Similarly, pin the second handle
to the bag back. Machine-baste the handles in place,
stitching " from the edge of the bag.
Basting stitches
Bag Front
18. Enjoy your finished bag!
Bag Side
Back of bag is shown semi-transparent,
so position of bag handle can be seen.
14. Make sure that the bag is wrong side out. Turn bag
lining right side out, and insert lining into bag.
(The right sides of bag and lining should be facing
each other.) Matching seams (the handles should be
hanging down inside the bag) and raw edges, pin bag
and lining together around the top.
Bag Lining (wrong side)
In The Beginning Fabrics 2011
8057 16th Ave. NE
Seattle, WA 98115
www.inthebeginningfabrics.com
