Scribd
Upload
46 views5 pages

Current Date

This document provides the results of a design for reinforced concrete footings, including geometry, materials, loads, reinforcement, and soil interaction checks. The design meets code requirements with safety factors above minimums for bearing capacity, overturning, and sliding.

Uploaded by

Karlithuz Zenitram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views5 pages

Current Date

This document provides the results of a design for reinforced concrete footings, including geometry, materials, loads, reinforcement, and soil interaction checks. The design meets code requirements with safety factors above minimums for bearing capacity, overturning, and sliding.

Uploaded by

Karlithuz Zenitram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Current Date: 11/05/2015 01:37 p.m.

Units system: Metric

Design Results
Reinforced Concrete Footings

GENERAL INFORMATION:
Global status
Design Code
Footing type
Column type

:
:
:
:

OK
ACI 318-05
Spread
Concrete

Geometry

Length :
3.00 [m]
Width :
2.00 [m]
Thickness
:
0.45 [m]
Base depth
:
1.50 [m]
Base area
:
6.00 [m2]
Footing volume :
2.70 [m3]
Column length :
Column width :

30.00 [cm]
30.00 [cm]

Column location relative to footing g.c.

Centered

Materials
Concrete, f'c :
0.21 [Ton/cm2] Steel, fy
:
Concrete type :
Normal Epoxy coated :
No
Concrete elasticity modulus
:
219.50 [Ton/cm2]
2038.89 [Ton/cm2]
Unit weight
:
2.40 [Ton/m3]
Soil
Modulus of subgrade reaction :

3150.00 [Ton/m3]

4.22 [Ton/cm2]
Steel elasticity modulus :

Unit weight (wet)

1.75 [Ton/m3]

Footing reinforcement
Free cover
:
8.00 [cm]
Maximum Rho/Rho balanced ratio
Bottom reinforcement // to L (xx)
Bottom reinforcement // to B (zz)
Bottom reinforcement // to B (zz)
Bottom reinforcement // to B (zz)
Dowel bar size
Rebar 1 :
8-#6
Free cover
:
2.50 [cm]
Development length calculated :
Bars number // to x axis
:
Bars number // to z axis
:
Stirrups :
#3 @ 20.00cm
Legs number // to x axis
:
Legs number // to z axis
:

:
:
:
:
:

0.75
9-#5 @ 23.00cm
2-#5 @ 42.00cm (Zone 1)
10-#5 @ 22.00cm (Zone 2)
2-#5 @ 42.00cm (Zone 3)

in tension
3
3
2
2

Load conditions to be included in design


Service loads:
SC1
:
DL
Design strength loads:
DC1
:
1.4DL
Loads
Condition
[Ton]

Axial Mxx
[Ton*m]

Mzz
Vx
[Ton*m]

Vz
[Ton]

[Ton]

RESULTS:
Status :

OK

Soil.Foundation interaction
Allowable stress
:
1.5E04 [kg/m2]
Min. safety factor for sliding :
1.25
Min. safety factor for overturning
:
1.25
Minimum safety factor for bearing capacity (uplift)

2.50

Controlling condition :
SC1
Safety factor for bearing capacity (uplift)

1000.00

Condition
qmean qmax Dmax
Overturning
FS
[kg/m2]
[kg/m2]
[cm]

Area in compression

SC1

100

1000.00

Dist1
[cm]

Dist2
[cm]

6.00

[m2]

(%)

FSx

FSz

1000.00

slip
1000.00

Bending
Factor f :
0.90
Min rebar ratio :
Development length
Axis
Pos.

0.00180

ld
[cm]

lhd
[cm]

zz
xx

Bot.
Bot.

60.37 21.13 77.00 77.00


62.60 21.91 127.00 127.00

Axis

Pos.

Condition
Mu
[Ton*m]

f*Mn Asreq Asprov Asreq/Asprov Mu/(f*Mn)


[Ton*m]
[cm2] [cm2]

zz
zz
xx
xx

Top
Bot.
Top
Bot.

DC1
DC1
DC1
DC1

0.00
0.00
0.00
0.00

0.00
0.00
0.00
0.00

0.00
24.02
0.00
35.63

Factor f :
0.75
Shear area (plane zz)
Shear area (plane xx)

:
:

0.72 [m2]
1.04 [m2]

Plane Condition
[Ton]

Vu
[Ton]

Vc

xy

79.99 0.000

0.00
18.00
0.00
28.00

Shear

DC1

0.00

Vu/(f*Vn)

0.000
0.000
0.000
0.000

0.000
0.000
0.000
0.000

yz

DC1

0.00

55.77 0.000

Punching shear
Perimeter of critical section (b...
:
Punching shear area :
0.91 [m2]
Column Condition
[Ton]

Vu
[Ton]

Vc

column 1

0.00

140.76 0.000

DC1

2.60 [m]

Vu/(f*Vn)

Notes
* Soil under the footing is considered elastic and homogeneous. A linear soil pressure variation is
assumed.
* The required flexural reinforcement considers at least the minimum reinforcement
* The design bending moment is calculated at the critical sections located at the support faces
* Only rectangular footings with uniform sections and rectangular columns are considered.
* The nominal shear strength is calculated in critical sections located at a distance d from the
support face
* The punching shear strength is calculated in a perimetral section located at a distance d/2 from
the support faces
* Transverse reinforcement is not considered in footings
* Values shown in red are not in compliance with a provision of the code
*qprom = Mean compression pressure on soil.
*qmax = Maximum compression pressure on soil.
*Dmax = maximum total settlement (considering an elastic soil modeled by the subgrade reaction
modulus).

* Mn = Nominal moment strength.


* Mu/(f*Mn) = Strength ratio.
* Vn = Nominal shear or punchure force (for footings Vn=Vc).
* Vu/(f*Vn) = Shear or punching shear strength ratio.

You might also like