C-BAND TRANSCEIVER 16 W TO 200 W
icle?
AWMT-3000C series
FEATURES
70 or 140 MHz Tx and Rx interface
Easy to install and operate
Compact light weight design
Weatherproof package
Phase-locked LNB
Low phase noise
Remote Monitor & Control (RS-232 and RS-485)
Relay alarm indicators
LED status indicators
Automatic high reflected power protection
Harmonic Filter
High stability internal 10MHz reference
Downloadable PC GUI
Redundant operation ready
OPTIONS
Extended C-Band (5.85 6.725 GHz)
Additional L band interface
LNA operation
Step Size 125 KHz option
Remote M&C panel (Ethernet port optional)
External 10 MHz reference with auto sensing
OVERVIEW
APPLICATION
The Advantech range of transceivers uses the latest
technology, local and remote control thus providing the
ultimate in performance and user friendly operation at a very
competitive price.
The AWMT-3000C is designed to operate in the C-band
with 70 MHz or 140 MHz IF interface. The unit is selfcontained and is intended for mounting outdoors, close to
the OMT of an antenna.
AWMT-3000C is a family of hub-mount transceivers
operating in the C-band from 16W to 200W. These
transceivers are designed for continuous operation in the
harshest outdoor environment. The built-in microprocessor
controller provides for external monitoring and control of the
operating parameters, and for the redundancy control. The
LNB is connected to the transceiver with a single coaxial
cable. Apart from the LNB, the complete unit is available in a
single integrated package. Higher power transceivers are
also available in the AWMT-C series for up to 500W.
REDUNDANCY
The flexible and comprehensive monitor and control features
on the transceiver ensure that it will fit into any network
management system architecture. The user-friendly RS-232
interface will provide full set-up and fault monitoring facilities
via a PC terminal mode communication or a hand-held
terminal. The RS-485 interface will provide functional remote
Monitor & Control, using the Graphic User Interface (GUI) or
the Monitor & Control Panel.
www.AdvantechAMT.com
The AWMT-3000C series of transceivers may be
configured to operate in 1:1 redundancy mode. No extra
controller is required for redundancy operation, as the
built-in controller in each amplifier provides this function.
Redundancy kits are required for redundant operation.
ACCESSORIES
Mounting kits for transceiver installation
Redundancy kits
Mounting frame for redundancy applications
Transmit Reject Filter and/or Receive Reject Filter
(external)
Remote Control Panel
Hand-Held terminal
C-BAND TRANSCEIVER 16 W TO 200 W
AWMT-3000C series
Transmit Path
Model
P1dB min. (dBm)
Gain min @ max. gain set (dB)
Power Consumption
16W
41
62
145
20W
42
63
170
25W
43
64
200
Unit Weight
Dimensions (L x W x H)
Transmit Path
IF Input
Frequency range
Input Connector
Input Return Loss
30W
44
65
300
Receive Path
RF Input
RF Input Frequency
RF Input Interface
Input VSWR
IF Output
Frequency range
Output Level
Output Connector
Output Return Loss
50W
46
67
400
60W
47
68
500
80W
48
69
700
100W
49
70
900
125W
50
71
1100
150W
51
72
1300
200W
52
74
1500
32 kg (70 lbs)
18.50 x 9.80 x 9.21 (46.99 x 24.89 x 23.39 cm)
RF Output
70 18 MHz
(140 36 MHz optional)
Type N female
18 dB / 50
Gain Specification
Gain control range
Gain flatness
Gain stability
40W
45
66
350
20 dB (0.1 dB step size)
Frequency range
(Non-inverting)
Output connector
Output Return Loss
Third order IMD (2 tones
5 MHz apart)
Spurious (in band)
Noise Power Density
3.0 dB p-p max over 36 MHz
5.850 6.425 GHz
6.425 6.725 GHz
6.725 7.025 GHz
CPR 137G (N-Type option up to 150 W)
20dB (18 dB for coaxial cable)
-26 dBc max at 3dB total back-off from
rated P1dB
-55 dBc max
-70 dBm/Hz max in TX band
-155 dBm/Hz max in 3.4 4.2 GHz in
RX band
3.0 dB p-p max over temp. range
3.4 4.2 GHz
4.2 4.5 GHz (CI)
CPR-229G
2.5:1
70 18 MHz
(140 36 MHz optional)
+5 dBm
Type N female / 50
18 dB/ 50
Common Parameters (Tx & Rx)
1 MHz (option 125 KHz)
Synthesizer step size
Frequency Stability
-8
2 x 10
-40C to +55C
-7
Aging
1 x 10 /year
Phase Noise
(With internal 10MHz reference)
Offset frequency
Phase noise (max)
100 Hz
-60 dBc/Hz
-65 dBc/Hz typical
1000 Hz
-70 dBc/Hz
-73 dBc/Hz typical
10 KHz
-80 dBc/Hz
-85 dBc/Hz typical
100 KHz
-90 dBc/Hz
-95 dBc/Hz typical
Monitor & Control
Serial port (RS-485)
MS3112E10-6P
Serial port (RS-232)
MS3112E10-6P
Redundancy Port
MS3112E16-26P
Discrete Port
MS3112E12-10P
Gain Specification
Gain (LNB + Receiver)
Gain control range
Gain flatness
Gain stability
Spurious
Image Rejection
LNB Parameters
LNB type
Noise Temperature
L-band Output Frequency
L-band Output Interface
Conversion Gain
DC power
Phase lock to 10 MHz ref. (from
Transceiver via coax. cable)
35K
950-1750 MHz
Type N female 50
60 dB
1218V DC (via coaxial cable)
LNA Parameters (optional)
Noise Temperature
Output Interface
Gain
DC power
35K (30K optional)
Type N female 50
60 dB
1218V DC (via coaxial cable)
Environmental
Cooling
Operational
Storage
Humidity
Altitude
Power Requirements
AC input voltage
AC Connector
Mechanical
Packaging
PB-WT120-01 Rev.03 issued on 02/28/2007 Specifications are subject to change without notice
United States
1553 W Todd Dr, Suite 206
Tempe, Arizona
United States, 85283-4805
Tel.: (480) 839-4136
Fax: (480) 839-0860
Email: [email protected]
80 dB @ max gain set
20 dB (0.1 dB step size)
2.5 dB max over full RF band
3.0 dB max over temp. range
-55 dBc
50 dB
CANADA
657 Orly Avenue
Dorval, Quebec
Canada H9P 1G1
Tel.: (514) 420-0045
Fax: (514) 420-0073
Email: [email protected]
Forced Air
-30C to +55C standard
(-40C to +55C option)
-55C to +85C
Up to 100% condensing
3,000 m AMSL (derated 2C/300m)
Auto ranging 110/22015% (47-63 Hz)
MS3102R16-10P
Weatherproof for outdoor use
An ISO9001: 2000 Company
EUROPE
39 Edison Road
St. Ives Huntington, Cambridgeshire
United Kingdom PE27 3LF
Tel.: +44 (1480) 357 600
Fax: +44 (1480) 357 601
Email:
[email protected]
