G Ul F G Rill
ES C O.
LINEAR SLOT
DIFFUSERS
LINEAR SLOT SUPPLY AIR DIFFUSER
LINEAR SLOT DIFFUSER WITH DEFLECTION BLADES
AND VOLUME CONTROL DAMPER .
... ------
-------t
--------c
--
--------
PRODUCT DESCRIPTION
The linear slot diffuser with deflection blades and
control
damper
is constructed
of extruded
aluminium alloy and are polyester powder coated
finish.
The volume control damper consists of two strips of
extruded aluminium, one fixed and one movable.
They both have 5/8" x 7/8" rectangular holes on
1-3/4" center, for 3/4" and 1" slot opening.
The fully adjustable deflection blades allow for the air
pattern to be controlled along the ceiling, straight
down or at some intermediate setting.
By offsetting the holes the air flow rate can be reduced.
Damper works also as equalizing grid.
The deflecting blades are designed so that when in
the closed position, the air pressure tends to
form a tight seal.
Maximum length supplied - 10 feet.
Standard finish is white calor for slot diffuser and
deflection blades. Damper in black calor. Painted
under electrostatic polyester powder coated system.
Other colors available on request. The polyester
powder of highest quality are used to enhance the
appearance of the units.
The slots are available in 3/4" or 1" width.
The air flow rate can be varied without changing the
air pattern by the use of the volume control damper
attached to the rear side of the diffuser.
Listed Sizes
3/4" Slot Width
No. of
1.65
1.42
2.99
4.33
B (in.)
2.76
4.09
5.67
5.43
C (in.)
3.31
4.61
5.94
7.28
CFM/FT
10-100
20-125
30-150
Slots
A (in.)
7.01
8.35
8.15
9.65
9.41
10.94
6.81
8.58
9.96
11.38
12.64
40-200
50-250
60-300
70-350
80-400
10.71
1" Slot Width
No. of
Slots
A (in.)
1.94
3.58
5.23
6.88
8.52
10.17
11.81
13.46
B (in.)
3.35
6.64
8.42
9.93
11.58
13.22
5.13
4.99
6.77
8.28
C (in.)
1.70
3.48
10.06
11.71
13.36
15.00
CFM/FT
10-100
20-125
30-150
40-200
50-250
60-300
70-350
80-400
7-1
LS3-A
LINEAR SLOT RETURN AIR DIFFUSER
LINEAR SLOT DIFFUSER WITH DEFLECTION BLADES
AND WITHOUT VOLUME CONTROL DAMPER.
-I
I'"
-I
PRODUCT DESCRIPTION
The linear slot diffuser with deflection blades is
constructed of extruded aluminium alloy and are
polyester powder coated finish.
The slots are available in 3/4" or 1" width.
Maximum length supplied - 10 feet.
The fully adjustable deflection blades allow for the air
p.attern to be controlled along the ceiling, straight
down or at some intermediate setting.
Standard finish is white calor for slot diffuser and
deflection blades.
Painted under electrostatic
polyester powder coated system.
Other
colors
available on request. The polyester powder of highest
quality are used to enhance the appearance of the
units.
The deflecting blades are designed so that when in
the closed position, the air pressure tends to form a
tight seal.
Listed Sizes
3/4" Slot Width
No. of
B (in.)
1.65
1.42
2.99
4.33
8.35
6.81
8.15
9.65
9.41
10.94
4.09
5.67
5.43
7.01
2.76
C (in.)
3.31
4.61
5.94
7.28
8.58
11.38
12.64
10-100
20-125
30-150
40-200
50-250
9.96
60-300
70-350
80-400
A (in.)
1.94
3.58
5.23
6.88
8.52
10.17
11.81
13.46
B (in.)
1.70
3.35
4.99
8.28
9.93
11.58
13.22
C(in.)
3.48
6.77
10.06
11.71
13.36
15.00
CFM/ft.
10-100
5.13
20-125
6.64
8.42
30-150
40-200
50-250
60-300
70-350
80400
Slots
A (in.)
CFM/ft.
10.71
1" Slot Width
No. of
Slots
7-2
-0
LINEAR SLOT RETURN AIR DIFFUSER
LINEAR SLOT DIFFUSER WITHOUT DEFLECTION BLADES
AND WITH VOLUME CONTROL DAMPER.
~------
2-3/8"
A -------.1
I"J-----;-I~---:__--____I'
[:1-1/4,,-1
-----1J
PRODUCT DESCRIPTION
The linear slot diffuser with volume control damper
and no deflection blades is constructed of extruded
aluminium alloy and are polyester powder coated
finish.
They both have a series of 5/8" x 7/8" rectangular holes
on 1-3/4" center, for 3/4" and 1" slot opening.
By offsetting the holes the airflow rate can be reduced.
The air flow rate can be varied by the use of the volume
control damper attached to the rear side of the diffuser.
Maximum length supplied - 10 feet.
Standard finish is white color for slot diffuser. Damper
in black calor. Painted under electrostatic polyester
powder coated system. Other colors available on
request. The polyester powder of highest quality are
used to enhance the appearance of the units.
The volume control damper consists of two strips of
extruded aluminium, one fixed and one movable.
Listed Sizes
3/4" Slot Width
No. of
Slots
A (in.)
B (in.)
C (in.)
CFM/FT.
1.65
1.42
2.99
4.33
5.67
2.76
4.09
5.43
7.01
8.35
8.15
9.65
9.41
10.94
6.81
3.31
4.61
5.94
7.28
8.58
9.96
11.38
12.64
10-100
20-125
30-150
40-200
50-250
60-300
70-350
80-400
10.71
1" Slot Width
No. of
A (in.)
1.94
3.58
5.23
6.88
8.52
10.17
11.81
13.46
B (in.)
1.70
3.35
4.99
8.28
9.93
11.58
13.22
C(in)
3.48
5.13
6.77
6.64
8.42
10.06
11.71
13.36
CFM/FT.
10-100
20-125
30-150
40-200
50-250
60-300
70-350
15.00
80-400
Slots
7-3
END CAP ARRANGEMENTS
SLOT DIFFUSER WITHOUT END CAP
I.. -----
L = NOMINAL
SIZE ------.
SLOT DIFFUSER WITH ONE END CAP: RIGHT OR
LEFT
1+-----
= NOMINAL
SIZE
---------+
END CAP BOTH ENDS
11
11
11
11
11
11
11
11
END CAP LEFT
-11
WITHOUT END CAP
-11
END CAP RIGHT
-I
7-4
- ear Slot Supply Diffuser Featuring Fully Adjustable Deflection
a es. The Deflection Blades Provide Combination Air-Pattern, Flow
ate Control and Blank-Off.
Si gle Slot Adjustments
Horizontal Right
Horizontal Left
Fully Vertical
Fully Closed
Multiple Slot Adjustments, Up to 8 Slots Wide
One - Way
Opposed
IMPORTANT
Imbalance
Two - Way
Vertical and Horizontal
NOTE:
In all air-slot type diffusers, constriction of free area by blade
relationships must be set carefully so as not to throttle airstream,
with resultant increase in static pressure and noise level criteria.
It is recommended that care be exercised in setting blades to
prevent such excessive constriction of air passageway.
2-Way throw may be obtained by staggering each length
of deflection blades alternately from right to left.
7-5
MITERED CORNERS
SIDE WALL -INSIDE
CORNER
SIDE WALL - OUTSIDE CORNER
...-----
!.--
11-13/16"
11-13/16" -----+I
--..!
CEILING CORNER PIECES (Available in one through eight slots)
7-6
LINEAR SLOT AIR
ENGINEERING
Blade Settings T e deflection blades
of the supply
slot linear
diffuser can be adjusted to give either a horizontal
or vertical air pattern.
The horizontal air flow
adjustment may be set for either left or right hand
throw.
DIFFUSERS
DATA
Sound DataSound data (NC values) shown in the Performance
Tables are based on a room absorption of 10dB,
re 10-12 Watts and a 4-feet unit test length.
To
determine NC values for other lengths, add NC value
to catalog data as follows:
Diffuser Active Length (ft.)
Add NC Value (dB)
"
I
" -""
_/
'.... ..
I
I
I
\
,'
\
\
\
----
I
,
," ... _-_
I
I
/
/'
Changing the blade setting also changes the
noise and total pressure.
Throw DataAll throw data is based on the results of tests of
4-feet length diffusers.
To determine throws for
other diffuser lengths, use correction factors as
follows:
Diffuser Active Length(ft.
Throw Correction Factor
0.6
6-8
0.8
0.9
1.0
1.3
2
-3.0
-1.5
6-8
1.0 2.0
Selection Procedure
The horizontal throw data is presented in the
performance data pages with all slots supplying air
in a given direction. To determine two-way throw,
use the catalog throw data for the desired quantity
of air from the number of slots in each direction
and reduce the throw by twenty percent.
Example
Determine the throw for an LS3-AD (3/4" Slot Width)
2 ft. long, 3-slot diffuser with 250 CFM in one
direction and 120 CFM in the other.
A. 250 CFM, 2', 2-slots = 125 CFM/ft
Catalog throws = 31 - 37
Throws x 0.80 = 25 - 30
B. 120 CFM, 2', t-slot = 60-CFM/ft
Catalog throws = 22 - 26
Throw x 0.80 = 18 - 21
Area Factor Summary
Slot
Width
3/4"
1"
Number of
Slots
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Horizontal
Vertical
Return
0.073
0.135
0.201
0.265
0.330
0.395
0.455
0.121
0.180
0.237
0.295
0.355
0.413
0.470
0.123
0.184
0.242
0.301
0.362
0.421
0.479
0.520
0.088
0.162
0.241
0.318
0.396
0.474
0.530
0.184
0.274
0.360
0.448
0.540
0.628
0.714
0.806
0.539
0.188
0.281
0.367
0.457
0.546
0.631
0.551
0.641
0.732
0.822
7-7
SUPPLY LINEAR SLOT AIR DIFFUSERS
PERFORMANCE DATA
Model : LS3 - AD
Linear Diffuser 3/4" Slot Width
No. 01
Slots
CFM/FT.
30
90
100
125
.200
.356
.557
.802
1.092
1.426
. 1.804
2.228
15-19
18-21
20-24
22-26
23-28
25-30
27-32
28-33
NC
<20
<20
30
39
41
47
>50
>50
>50
>50
VERT. SP
.010
.039
.088
.157
.245
.353
.480
.627
.794
.. 980
2-5
9-15
16-23
22-27
25-30
27-32
29-35
31-37
33-39
35-42
<20
<20
<20
20
27
33
38
42
46
49
HOR. SP
.022
.050
.089
.139
.200
.273
.356
.451
.557
.870
THROW
9-13
14-19
18-21
20-24
22-26
23-28
25-30
27-32
28-33
31-37
150
NC
<20
<20
<20
28
33
38
42
46
>50
>50
VERT. SP
.010
.022
.039
.061
.088
.120
.157
.199
.245
.383
THROW
3-6
7-13
12-21
19-26
23-31
27-35
30-37
33-39
35-42
39-46
NC
<20
<20
<20
<20
<20
<20
23
27
30
37
HOR. SP
.022
.040
.062
.089
.121
.158
.200
.248
.387
.557
THROW
11-16
15-21
19-24
23-26
23-28
25-30
27-32
28-33
31-37
34-41
200
NC
<20
<20
<20
22
27
31
35
38
46
50
VERT. SP
.010
.017
.027
.039
.053
.070
.088
.109
.170
.245
THROW
4-8
7-13
10-20
15-26
20-30
25-34
28-38
31-42
39-46
43-51
NC
<20
<20
<20
<20
<20
<20
<20
<20
26
32
.022
.035
.050
.068
.089
.113
.139
.218
.313
.557
13-18
16-23
20-27
23-28
26-30
27-32
28-33
31-37
34-41
40-47
250
NC
<20
<20
<20
<20
24
27
31
38
43
>50
VERT. SP
.010
.015
.022
.030
.039
.050
.061
.096
.138
.245
4-9
7-13
10-18
13-25
17-30
22-33
27-36
34-46
40-51
50-58
<20
<20
<20
<20
<20
<20
<20
<20
24
33
.022
.032
.044
.057
.072
.089
.139
.200
.356
.557
15-20
18-24
20-28
23-30
26-32
29-33
31-37
34-41
40-46
44-52
HOR. SP
THROW
300
NC
<20
<20
<20
<20
21
24
32
37
46
>50
VERT. SP
.010
.014
.019
.025
.032
.039
.061
.088
.157
.245
THROW
5-10
7-13
9-18
12-23
16-29
19-33
30-41
36-49
48-58
56-65
<20
<20
<20
<20
<20
<20
<20
<20
27
34
.022
.030
.040
.050
.062
.097
.139
.248
.387
.557
16-22
19-26
21-29
24-33
27-35
31-37
34-41
40-47
44-52
48-57
NC
HOR. SP
THROW
350
NC
<20
<20
<20
<20
<20
27
32
41
49
>50
VERT. SP
.010
.013
.017
.022
.027
.043
.061
.109
.170
.245
THROW
5-10
7-14
9-18
12-22
15-27
23-38
33-45
44-58
55-65
61-71
NC
<20
<20
<20
<20
<20
<20
<20
22
29
35
HOR. SP
.022
.029
.037
.045
.071
.102
.182
.284
.409
.557
THROW
17-24
20-27
22-31
25-34
31"-37
34-41
40-47
44-52
48-56
52-61
400
NC
<20
<20
<20
<20
22
28
37
44
50
>50
VERT. SP
.010
.013
.016
.020
.031
.045
.080
.125
.180
.245
THROW
6-11
7-14
9-18
12-22
18-33
26-42
41-55
51-65
61-70
66-77
NC
<20
<20
<20
<20
<20
<20
<20
25
31
37
.022
.028
.035
.054
.078
.139
.218
.313
.426
.557
18-26
21-29
23-32
29-37
35-41
40-47
44-52
48-56
52-61
56-66
HOR. SP
THROW
80
.089
NC
70
13-15
THROW
60
.022
THROW
50
7-10
HOR. SP
40
HOR.SP
NC
20
THROW
THROW
10
NC
<20
<20
<20
<20
24
34
41
46
50
>50
VERT. SP
.010
.012
.015
.024
.034
.061
.096
.138
.188
.245
THROW
6-12
8-15
10-18
15-28
22-39
38-52
48-64
57-70
66-77
70-82
<20
<20
<20
<20
<20
<20
21
27
32
36
NC
Ne Data based on 1OdB room attenuation.
Throw Data based on isothermal air at 100 and 50 fpm terminal velocity.
Horizontal Throw is 1 way pattern.
Static Pressure (SP) in inches w.g.
7-8
SUPPLY LINEAR SLOT AIR DIFFUSERS
PERFORMANCE DATA
Model: LS3 - AD
Linear Diffuser 1" Slot Width
No. cl
SIols
CFM/FT.
10
HOR. SP
.010
.040
.090
.160
.250
.360
.490
.640
.810
1.000
THROW
4-8
10-15
15-19
18-21
2024
2226
23-28
2530
27-32
28-33
80
90
100
125
<20
25
34
41
47
>50
>50
>50
>50
.066
.117
.183
.263
.358
.468
.592
.731
2-4
815
16-22
21-27
2529
2732
2935
3137
33-39
3542
<20
<20
<20
<20
21
27
32
36
40
43
HOR. SP
.010
.023
.040
.063
.090
.122
.160
.203
.250
.391
THROW
6-11
1115
1420
1824
22-26
2328
2530
2732
2833
3137
150
NC
<20
<20
<20
22
28
33
37
41
44
50
VERT. SP
.007
.016
.029
.046
.066
.089
.117
.148
.183
.285
THROW
3-6
612
1121
1725
22-30
26-35
29-37
33-39
35-42
3946
NC
<20
<20
<20
<20
<20
<20
<20
21
24
31
HOR. SP
.010
.018
.028
.040
.054
.071
.090
.111
.174
.250
THROW
713
12-17
15-21
1824
2128
23-30
26-32
2833
3137
34-41
200
Ne
<20
<20
<20
<20
22
26
30
33
40
46
VERT. SP
.007
.013
.020
.029
.040
.052
.066
.081
.127
.183
THROW
37
612
918
13-24
1829
2433
27-37
30-41
3746
4351
Ne
<20
<20
<20
<20
<20
<20
<20
<20
<20
26
HOR.SP
010
.016
.023
.031
.040
.051
.063
.098
.141
.250
THROW
8-15
1318
1521
1825
2028
2332
2533
3237
3441
40-47
250
Ne
<20
<20
<20
<20
<20
22
25
32
38
47
VERT. SP
.007
.011
.016
.022
.029
.037
.046
.071
.103
.183
4-8
6-12
9-17
12-22
16-29
20-32
24-36
32-44
39-51
50-58
<20
<20
<20
<20
<20
<20
<20
<20
<20
27
HOR. SP
.010
.014
.020
.026
.032
.040
.063
.090
.160
.250
TH,ROW
9-16
13-19
1622
18-25
20-28
23-31
2837
34-41
40-47
44-51
300
Ne
<20
<20
<20
<20
<20
<20
26
32
41
48
VERT. SP
.007
.011
.014
.019
.024
.029
.046
.066
.117
.183
4-9
6-12
916
1121
14-26
17-32
27-40
3547
46-58
5665
<20
<20
<20
<20
<20
<20
<20
<20
21
28
.010
.014
.018
.023
.028
.043
.063
.111
.174
.250
10-18
14-20
1723
19-26
21-29
29-36
31-41
40-47
44-52
48-57
Ne
HOR. SP
THROW
350
NC
<20
<20
<20
<20
<20
21
27
36
43
49
VERT. SP
.007
.010
.013
.016
.020
.032
.046
.081
.127
.183
THROW
59
6-13
816
1120
1325
21-36
20-43
4258
53-65
61-71
Ne
<20
<20
<20
<20
<20
<20
<20
<20
23
29
.Q10
.013
.017
.020
.032
.046
.082
.128
.184
.250
1119
1422
1724
19-27
2433
29-39
38-47
44-52
48-57
52-61
HOR. SP
THROW
70
.029
THROW
60
<20
Ne
50
.007
THROW
40
NC
NC
30
VERT. SP
THROW
20
400
Ne
<20
<20
<20
<20
<20
23
32
39
45
50
VERT.SP
.007
.010
.012
.015
.023
.034
.060
.093
.134
.183
THROW
510
7-13
9-16
11-20
1630
2440
39-53
4965
5971
6677
Ne
<20
<20
<20
<20
<20
<20
<20
<20
25
30
HOR. SP
.010
.013
.016
.024
.035
.063
.098
.141
.191
.250
THROW
1220
1523
1825
22-31
27-37
3647
45-52
48-57
52-61
56-66
NC
<20
<20
<20
<20
<20
28
35
41
46
50
VERT. SP
.007
.009
.011
.018
.026
.046
.071
.103
.140
.183
THROW
6-11
713
916
13-25
19-35
3450
4662
5571
64-77
70-82
<20
<20
<20
<20
<20
<20
<20
21
26
30
NC
Ne Data based on 1OdS room attenuation.
Throw Data based on isothermal air at 100 and 50 fpm terminal velocity.
Horizontal Throw is 1 way pattern.
Static Pressure (SP) in inches w.g.
7-9
RETURN LINEAR SLOT AIR DIFFUSERS
PERFORMANCE DATA
Model : LS3 - A
Linear slot diffuser with deflection blades and without volume control damper (3/4" Slot Width).
o. of
Negative SP
.005
.022
.048
.086
.133
.196
.270
.354
Slots
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
3
4
NC
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
10
20
30
40
50
60
70
80
<20
<20
<20
<20
25
31
36
40
20
40
60
80
100
120
140
160
<20
<20
<20
23
27
33
38
42
30
60
90
120
150
180
210
240
<20
<20
23
29
33
39
44
46
40
80
120
160
200
240
280
320
<20
<20
26
32
36
42
47
50
50
100
150
200
250
300
350
400
<20
<20
28
34
38
44
49
>50
60
120
180
240
300
360
420
480
<20
23
31
36
40
46
>50
>50
70
140
210
280
350
420
490
560
<20
23
31
37
42
48
>50
>50
80
160
240
320
400
480
560
640
38
44
>50
>50
>50
7
NC
CFM/Foot
NC
<20
24
32
Model : LS3 - 0
Linear slot diffuser without deflection blades and with volume control damper (3/4" Slot Width).
No. of
Negative SP
.015
.062
.134
.241
.372
.549
.756
.991
10
20
30
40
50
60
70
80
<20
<20
<20
22
27
32
37
42
20
40
60
80
100
120
140
160
<20
<20
24
32
38
43
48
>50
30
60
90
120
150
180
210
240
<20
<20
30
38
42
49
>50
>50
40
80
120
160
'200
240
280
320
Slots
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
3
4
NC
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
<20
23
34
43
48
>50
>50
>50
50
100
150
200
250
300
350
400
<20
26
38
46
>50
>50
>50
>50
60
120
180
240
300
360
420
480
<20
29
40
48
>50
>50
>50
>50
70
140
210
280
350
420
490
560
7
NC
CFM/Foot
NC
<20
31
43
>50
>50
>50
>50
>50
80
160
240
320
400
480
560
640
<20
33
45
>50
>50
>50
>50
>50
NC Data based on 1OdB room attenuation.
Static Pressure (SP) in inches w.g.
7-10
RETURN LINEAR SLOT AIR DIFFUSERS
PERFORMANCE DATA
Model : LS3 - A
Linear slot diffuser with deflection
o. of
Negative SP
blades and without volume control damper (1" Slot Width).
.016
.034
.055
.086
.123
.161
.205
.354
20
30
40
50
60
70
80
100
<20
<20
<20
<20
24
27
30
35
40
60
80
100
120
140
160
200
<20
<20
<20
22
26
29
33
37
60
90
120
150
180
210
240
300
<20
<20
<20
24
28
31
34
39
80
120
160
200
240
280
320
400
Slots
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
5
6
7
NC
<20
<20
<20
25
29
32
35
40
CFM/Foot
100
150
200
250
300
350
400
500
NC
<20
<20
21
26
30
33
36
41
CFM/Foot
120
180
240
300
360
420
480
600
NC
<20
<20
22
27
31
34
37
42
CFM/Foot
140
210
280
350
420
490
560
700
NC
<20
<20
23
28
32
35
38
43
CFM/Foot
160
240
320
400
480
560
640
800
NC
<20
<20
24
29
33
36
39
45
Model : LS3 - 0
Linear slot diffuser without deflection blades and with volume control damper (1" Slot Width).
No. of
Negative SP
.026
.095
.154
.240
.344
.451
.574
.991
20
30
40
50
60
70
80
100
<20
<20
<20
21
26
30
32
38
40
60
80
100
120
140
160
200
<20
<20
23
29
31
37
41
44
150
180
210
240
300
Slots
CFM/Foot
NC
CFM/Foot
NC
CFM/Foot
3
4
NC
CFM/Foot
NC
60
90
120
<20
<20
25
32
36
40
45
50
200
240
280
320
400
80
120
160
<20
22
26
34
39
43
48
>50
300
350
400
500
42
45
50
>50
480
600
CFM/Foot
100
150
200
250
NC
<20
24
29
36
CFM/Foot
120
180
240
300
360
420
NC
<20
26
32
39
45
49
>50
>519
CFM/Foot
140
210
280
350
420
490
560
700
NC
<20
29
36
43
48
>50
>50
>50
800
>50
CFM/Foot
160
240
320
400
480
560
640
NC
<20
31
40
46
>50
>50
>50
NC Data based on 1OdB room attenuation.
Static Pressure (SP) in inches w.g.
7-11
BALANCING OAT A
AIR FLOW
Supply Air Testing
Step 1 : Place an Alnor jet # 2220A as per sketch, and take velocity
readings at frequent intervals along one slot of a group of
slots having the same blade settings.
Take readings at approximately
intervals,
6" from end and at 1 foot
being careful to avoid readings
spacer bars which are at 18" intervals.
directly
below
Take atleast four
readings on units under 4 feet long.
Average the readings to obtain Average Velocity (Vk).
Fig. (1)
Step 2 : From table select the Ak for number of slots which have the
same blade settings.
AIR FLOW
Step 3 : Determine L as the length in feet of the section of slots having
the same settings.
Step 4 : Calculate CFM.
a. For Horizontal
Measure Vk on the side of slot as shown in Fig (1).
Take Ak from table.
Total CFM = Ak x Vk x L.
b. For Vertical
Fig. (2)
Measure Vk on one side of the slot as shown in Fig (2).
Take Ak from table.
Total CFM
AIR FLOW
Ak x Vk x L.
Return Air Testing
Measure Vk in the open side of the slot as shown in Fig (3).
Take Ak from table.
Total CFM = Ak x Vk x L.
Fig. (3)
7-12
INSTALLATION
DETAILS
Duct Width
0+1/16"
-0
B
I~
I~
1-5/8"
-l
.I
0+3/8"
Ceiling Opening
C
Ceiling Opening
No_ of
for 3/4" Slot Width
1
1.65
1.42
2.99
4.33
5.67
7.01
8.35
2.76
4.09
5.43
6.81
8.15
9.65
9.41
10.94
B (in.)
C (in.)
3.31
4.61
5.94
7.28
8.58
9.96
11.38
12.64
D (in.)
2.28
3.62
4.95
6.29
7.67
9.01
10.27
11.57
Slots
A (in.)
10.71
Ceiling Opening for 1" Slot Width
No. of
Slots
A (in.)
1.94
3.58
5.23
6.88
8.52
10.17
11.81
13.46
B (in.)
3.35
4.99
9.93
11.58
13.22
5.13
6.77
6.64
8.42
8.28
C (in.)
1.70
3.48
10.06
11.71
13.36
15.00
D (in.)
2.57
4.21
5.86
7.50
9.15
10.80
12.44
14.09
7-13
LINEAR SLOT DIFFUSERS
E GINEERING CALCULATION
R - Radius up to grille inside.
GRILLE'S SEGMENT
Grille Arch Length. (AIL).
= e x (11/180) x R
e -Angle, R - Radius
AIL
h = Segment Height.
R x (1 - COS (9/2.
L = Segment Length.
2 x R x (SIN (9/2.
1800
_mm--_m_.mmmmmmF==R--mm.m--.--m--~
Semi-Circular
Grille;
Arch Length = 11x R.
Full-Circular
Grille;
Arch Length
= 2 x 11x R.
NOTES:
All Curved Linear Slot Diffusers are ceiling mount.
The least radius of curvature is 1.5 meters.
Hit & miss damper for above diffusers will not be provided.
Full function of deflector (pattern controllers) may not be obtained
in above diffusers.
7-14
