Earphones and
Accessories
Single Ear Bud
Part Number: LA-161
Use with any of Listens receivers.
Economical, low cost hearing option.
6LQJOHHDUIULFWLRQW
Replaceable ear cushions available
(Specify LA-163).
The receivers antenna is built into the
headphone cord.
6SHFLFDWLRQV
Impedance
32 Ohm +/- 15%
Maximum Input
30 mW
Connector
3.5 mm mono
Cable Length
36 in. (92 cm)
Weight
4 oz. (113 g)
Dual Ear Bud
Part Number: LA-162
Use with any of Listens receivers.
'XDOHDUIULFWLRQW
Replaceable ear cushions available
(specify LA-163).
Economical cost hearing option.
The receivers antenna is built into the
headphone cord.
6SHFLFDWLRQV
Impedance
32 Ohm +/- 15%
Maximum Input
30 mW maximum
Connector
3.5 mm mono
Cable Length
36 in. (92 cm)
Weight
4 oz. (113 g)
Ear Bud Replacement Cushions
Part Number: LA-163
Package of 20.
Fits LA-161 Single Ear Bud and LA-162
Dual Ear Buds.
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407
Earphones and Accessories Page 1
Ear Speaker
Part Number: LA-164
6SHFLFDWLRQV
Use with any of Listens receivers.
Single ear clip that doesnt mess up hair.
Easily cleaned (solid plastic speaker).
Strong volume output.
The receivers antenna is built into the
headphone cord.
Impedance
32 Ohm +/- 15%
Maximum Input
100 mW
Connector
3.5 mm mono
Cable Length
36 in. (92 cm)
Weight
4 oz. (113 g)
Stereo Headphones
Part Number: LA-165
Dual ear over-the-head style.
Traditional headset design.
(DUFXVKLRQVIROGDWIRUFRQYHQLHQWVWRUDJH
Replaceable ear cushions available
(specify LA-167).
The earphone cord works as the receivers
antenna.
(DUSKRQH6SHFLFDWLRQV
Impedance
32 Ohm +/-15%
Maximum Input
100 mW
Connector
3.5 mm stereo
Cable Length
36 in. (92 cm)
Weight
5 oz. (142 g)
Neck Loop
Part Number: LA-166
Use with any of Listens receivers.
Use with any hearing aid equipped with
a T coil.
The receivers antenna is built in to the
headphone cord.
6SHFLFDWLRQV
Impedance
12 Ohm +/-15%
Maximum Input
2 W (75mW nominal)
Connector
3.5 mm mono
Cable Length
37 in. (94 cm)
Circumference
16 in. (41 cm) from
base of loop coil
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407
Earphones and Accessories Page 2
Replacement Cushions for Stereo Headphones (10)
Part Number: LA-167
Package of 10.
Fits LA-165 Stereo Headset.
Sanitary Covers for Stereo Headphones (10)
Part Number: LA-168
Use with Listen Stereo Headsets (LA-165)
FDA approved sanitary cover for ear
cushions.
Package of 10
Behind-the-Head Stereo Headphones
Part Number: LA-170
Dual ear output.
Behind-the-Head design allows usage
with hard hats and doesnt mess up hair.
)ROGVDWIRUFRQYHQLHQWVWRUDJH
Replaceable ear cushions available
(specify LA-167)
The earphone cord works as the
receivers antenna.
6SHFLFDWLRQV
Impedance
32 Ohm +/- 15%
Maximum Input
100 mW
Connector
3.5 mm stereo
Cable Length
36 in. (92 cm)
Weight
5 oz. (142 g)
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407
Earphones and Accessories Page 3
Over-the-Head Microphone and w/Earphone
Part Number: LA-272
6SHFLFDWLRQV
Use with Listens LT-700 Portable
Transmitter and Listen Receivers or other
audio input.
Two 3.5 mm connectors - one for the
microphone and the other for the
earphone.
Picks up voice and transmits to receivers.
Uni-directional mic picks up audio from
only one direction.
Superior aural performance.
Ideal for unobtrusive placement and
high performance.
Directional microphone picks up audio
directly in front of the mic.
Does not pick up unwanted audio and
noise in all directions
The transmitter and receiver antenna
is built in to this microphone/headphone
cord.
Impedance
Less than 2.2K ohm
Connector
3.5 mm mono
Phantom Power
3 VDC required
Cable Length
36 in. (92 cm)
Weight
8 oz. (227 g)
Portable Receiver Consumer Camcorder Cable
Part Number: LA-265
Use with any of Listens receivers.
Used to provide direct audio feed to a
consumer camcorder or other recording
device.
6SHFLFDWLRQV
Connectors
Male 3-pin XLR and
male 3.5 mm stereo
In-line Resister Pad
40 dB
Cable Length
4 ft. (121 cm)
Portable Receiver Professional Camcorder Cable
Part Number: LA-266
Use with any of Listens receivers.
Used to provide direct audio feed to a
professional camcorder or other
recording device.
6SHFLFDWLRQV
Connectors
Male 3-pin XLR and
male 3.5 mm stereo
In-line Resister Pad
40 dB
Cable Length
4 ft. (121 cm)
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407
Earphones and Accessories Page 4
DIS Stereo Headphones
Part Number: DH-6021
Durable reinforced cable.
90 stereo connector.
Special designed for speech
intelligibility.
Replaceable ear pads.
6SHFLFDWLRQV
Audio
Interconnections
Physical
Frequency response
35 Hz - 15 kHz
Nominal Impedance
600 Ohm
Loudspeaker maximum
power
86 dB @ 1 kHz
Load Rating
100 mW
Distortion
<1.5%
Headphone connector
One (1) 90 male 3.5
mm (0.14 in.) stereo
connector
Cable Length
62.0 in. (1.6 m)
Color
Black
Unit Weight
1.94 oz. (55 g)
Shipping Weight
1.0 lbs. (0.45 kg)
DIS Stethoscope Stereo Headphones
Part Number: DH-6023
Super light weight.
90 stereo connector.
Stethoscope style for
minimum discomfort to the
delegate.
Replaceable ear pads.
6SHFLFDWLRQV
Audio
Interconnections
Physical
Frequency Response
100 Hz - 4 kHz
Nominal Impedance
32 Ohm
Max input level
20 mVA
Headphone connector
One 91) 90 male 3.5
mm (0.14) stereo
connector
Cable Length
62.0 in. (1.6 m)
Color
Black
Unit Weight
0.63 oz. (18 g)
Shipping Weight
1.0 lbs. (0.45 kg)
DIS Clip Headphones
Part Number: DH-6025
Lightweight.
Replaceable ear pad.
90 stereo connector.
6SHFLFDWLRQV
Audio
Interconnections
Physical
Freqency Response
100 Hz - 4kHz
Nominal Impedance
32 Ohm
Max input level
10mVA
Headphone connector
One (1) 90 male 3.5
mm (0.14 in.)
connector
Cable Length
62.0 in. (1.6 m)
Color
Black
Unit Weight
0.35 oz. (10 g)
Shipping Weight
1.0 lbs. (0.45 kg)
Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407
Earphones and Accessories Page 5