BANNOH 500, HARDENER
MSDS-CSP(E)-5055H
PAGE
1/5
MATERIAL SAFETY
DATA SHEET
Est. Date
Rev. Date
Rev. No.
Oct. 6, 2000
Feb. 3, 2003
2
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
BANNOH 500, HARDENER
PRODUCT DESCRIPTION
Polyamide amine Resin Paint
COMPANY NAME
COMPANY IDENTIFICATION
ADDRESS
CHUGOKU SAMHWA PAINTS Ltd.
972, Toerae-ri, Hallim-myeon, Gimhae-si, Gyeongnam, Korea
EMERGENCY TELEPHONE NUMBER
055-340-0750
2. COMPOSITION ON HAZARDOUS INGREDIENTS
Chemical Name
CAS NO.
Polyamide amine Resin
Wt. (%)
Remark
45 55
Xylene
1330-20-7
30 40
Butanol
71-36-3
15 25
Etc.
1 10
3. HAZARDS IDENTIFICATION
1. EMERGENCY OVERVIEW
Flammable Coating having solvent odor.
May cause eye ,skin and respiratory irritation .
May cause drowsiness by high vapor concentrations.
This product has a mutagenicity hazard.
2. POTENTIAL HEALTH EFFECTS
1) EYE CONTACT: May cause severe eye irritation.
2) SKIN CONTACT: May cause irritation or allergic reaction by prolonged contact
3) INGESTION: Harmful , or fatal if swallowed much.
4) INHALATION : Vapor material may be rapidly absorbed through the lung.
Repeated exposure in the vapor may cause damage to liver and kidneys. Overexposure may cause central
nervous system depression, including drowsiness and unconsciousness.
CSP-MSDS-01
CHUGOKU SAMHWA PAINTS Ltd..
A4(210mm297mm)
BANNOH 500, HARDENER
MSDS-CSP(E)-5055H
PAGE
2/5
MATERIAL SAFETY
DATA SHEET
Est. Date
Rev. Date
Rev. No.
Oct. 6, 2000
Feb. 3, 2003
2
4. FIRST AID MEASURES
1. EYE CONTACT: Immediately flush with water for at least 15 minuets. It is also recommended to have
medical personal check your eyes afterwards.
2. SKIN CONTACT: Remove severely contaminated clothing , immediately and
Flush skin with large amounts of water until irritation subside.
If irritation persists , get medical attention.
3. INHALATION : Remove to fresh air and if not breathing , give mouse to mouse resuscitation.
If breathing is difficult, give oxygen. Call a physician.
4. INGESTION : Do not induce vomiting . Keep rest. Get prompt medical attention.
5. FIRE FIGHTING MEASURES
Flash Point()
26
Ignition Point()
None
Flammable Limits LFL(%)
1.1
Flammable Limits UFL(%)
10.6
1. GENERAL HAZARD
Flammable Liquid; may release flammable vapors when temperatures are at or over the flash point.
Toxic gases will form upon combustion.
2. FIRE FIGHTING INSTRUCTIONS
Allow fire to burn out under controlled conditions or Fight fire from a safe distance, extinguishing with
foam , dry chemical , carbon dioxide or dry sand. Do not use directly WATER to extinguish to avoid
the danger of fire spread that may be caused by floating flammable material on the water surface.
But if possible to do without hazard, use water spray to cool fire exposed surface and isolate material
from heat .
3. EXTINGUISHING MEDIA
Carbon dioxide, foam , dry chemical or dry sand
4. FIRE FIGHTING EQUIPMENT
Respiratory and eye protection required for fire fighting personnel.
Full protective equipment(Bunker Gear) and a self-contained breathing apparatus (SCBA) should be used for
all indoor fires and significant outdoor fires.
For small outdoor fires, which may easily be extinguished with a portable fire extinguisher, use of an SCBA
may not be required.
5. HAZARDOUS COMBUSTION PRODUCT
Smoke, fumes and oxide of carbon
CSP-MSDS-01
CHUGOKU SAMHWA PAINTS Ltd..
A4(210mm297mm)
BANNOH 500, HARDENER
MSDS-CSP(E)-5055H
PAGE
3/5
MATERIAL SAFETY
DATA SHEET
Est. Date
Rev. Date
Rev. No.
Oct. 6, 2000
Feb. 3, 2003
2
6.ACCIDENTAL RELEASE MEASURES
1. Provide maximum ventilation.
2. Personal protection should be used.
3. Remove all sources of ignition.
4. Contain spilled liquid with sand or earth.
5. Avoid runoff into storm sewers and ditches which lead to waterways.
6. Take up spilled material with sawdust, vermiculite or other absorbent material and place in a disposal
container.
7. HANDLING AND STORAGE
1. Handling in sufficiently ventilated areas.
2. Handling in closed areas requires local ventilation.
3. Keep container closed. Loosen closure cautiously before opening.
4. Store in a cool, well ventilated place away from incompatible materials.
5. Keep away from heat, sparks and flame. Protect material from direct sunlight.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
1. RESPIRATORY PROTECTION
: In confined or poorly ventilated areas, use an approved positive pressure self-contained breathing apparatus.
2. SKIN PROTECTION
: Use imperishable gloves to this material , such as made from butyl rubber .
3. EYE PROTECTION
: Use safety glasses. Wearing goggles is better.
3. EXPOSURE GUIDELINE
: Confer No.11 (TOXICOLOGICAL INFORMATION)
CSP-MSDS-01
CHUGOKU SAMHWA PAINTS Ltd..
A4(210mm297mm)
BANNOH 500, HARDENER
MSDS-CSP(E)-5055H
PAGE
4/5
MATERIAL SAFETY
DATA SHEET
Est. Date
Rev. Date
Rev. No.
Oct. 6, 2000
Feb. 3, 2003
2
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
: Liquid Paint
ODOR
: Solvent Smell
PH
: None
MELTING POINT()
None
BOILING POINT () : 107.9 144
SOLUBILITY
: Insoluble in water
VAPOR PRESSURE(20)
VISCOSITY(25)
: None
SPECIFIC GRAVITY(20/20) : 0.90 0.94
DENSITY(Vapor)
: Heavy than air
MOLECULAR WEIGHT
Etc.
: 1060 Pa
: None
10. STABILITY AND REACTIVITY
1. Stability(Conditions to avoid)
: This product is considered stable under normal and anticipated storage and handling conditions.
But avoid open flame ,electrical equipment sparks and other sources of ignition which induce fire.
2. Incompatibility(Specific materials to avoid)
: Acid and alkali which contact may cause reaction.(polymerization with heat)
11. TOXICOLOGICAL INFORMATION
CHEMICAL NAME
TLV
LD 50 (Mouth)
LD50 (Skin)
LC50 (Inhalation)
Xylene
100 ppm
4,300mg/kg.rat
1,700mg/kg.rat
5,000ppm/4hr.man
Butanol
50 ppm
4,360mg/kg.rat
3,400mg/kg.rat
None
1. IRRITATION: Skin or eye irritation may be caused by prolonged or repeated contact with this material,
or by overexposure of the vaporized materials.
2. CARCINOGENICITY : May be no.
CSP-MSDS-01
CHUGOKU SAMHWA PAINTS Ltd..
A4(210mm297mm)
BANNOH 500, HARDENER
MSDS-CSP(E)-5055H
PAGE
5/5
MATERIAL SAFETY
DATA SHEET
Est. Date
Rev. Date
Rev. No.
Oct. 6, 2000
Feb. 3, 2003
2
12. ECOLOGICAL INFORMATION
This has the potential to be toxic in environments. Do not leak or waste in the environments without adequate
waste disposal handling.
13. DISPOSAL CONSIDERATION
Empty containers and material (including waste thinner for cleaning and flushing of containers or application
equipment ) must be disposed in accordance with government and local environmental control regulations.
Do not heat or cut empty container with electric or gas torch because due to residue.
14. TRANSPORT INFORMATION
For safety of shipping : Flammable liquid (class 3.2)
U.N number 1263
15. REGULATORY INFORMATION
1. Precaution control act for toxic organic solvents
2. Occupational safety and health control act
3. Fire protection act
16. OTHER INFORMATION
The information herein is given in good faith, but we cannot guarantee that these are the only hazards
which exist.
Final determination of suitability of any material is the sole responsibility of the user.
All materials may present unknown hazards and should be used with caution.
CSP-MSDS-01
CHUGOKU SAMHWA PAINTS Ltd..
A4(210mm297mm)
