Building Solutions
One Honeywell Solution
for All of Your Fire Systems Needs
Intelligent and Accurate Detection
Fire/CO
The Advanced Multi-Criteria Fire/CO Detector is a plug-in, addressable device that
provides both fire and Carbon Monoxide (CO) detection. For fire, the detector combines
four separate sensing elements in one unit (smoke, CO, infrared and heat) to sense
multiple components of a fire. This approach has enhanced sensitivity to a real fire with
heightened immunity to nuisance particulate. For CO, the detectors electrochemical
sensing cell creates a separate signal for life safety CO detection. When used together
with our addressable sounder base, you can replace as many as four separate devices
for a cleaner and more efficient installation.
COPTIR
COPTIR senses smoke particulate from Carbon Monoxide (CO), thermal, photo,
and infrared signatures simultaneously to determine the presence of a fire condition.
Sensor readings are continually evaluated against one another, allowing the detector
to operate normally with high immunity to nuisance conditions, while quickly responding
to true alarm events.
ACCLIMATE
The Acclimate detector combines thermal and photoelectric technologies into a single
device. It constantly monitors ambient heat and particulate conditions, adjusting sensitivity parameters and alarm thresholds automatically to maximize detection across a broad
range of fire types.
FAAST
Fire Alarm Aspiration Sensing Technology (FAAST) solutions provide early warning of
an impending fire hazard. FAAST can buy time to investigate an alarm and initiate an
appropriate response to prevent injury, property damage, or business disruption. With
a wide sensitivity range and multi-level warnings, even minute levels of smoke can be
detected before a fire has time to escalate. It is also possible to connect the unit to the
buildings Ethernet connection in order to provide access and monitoring from anywhere
in the world.
ECLIPSE
The EclipseTM family is an innovative line of detection and notification devices, which
boasts a completely digital, powerful and extremely fast protocol. Unmatched in the
industry, this protocol is one of many unique features of the XLS3000 Fire Alarm System.
Other benefits include:
Intelligence in the head via distributed processing; digital protocol for speed, accuracy,
and error detection; peer-to-peer device communication; and adaptable to existing
wiring
Integral Isolators such as loop reliability (short circuit protection, earth fault detection)
Auto addressing; As-wired mapping - cable tree structure; and providing Style 7
operation
Electronic addressing features such as Unique Serial Number; device replacements
can be found and automatically addressed; and eliminates dual addressing
Emergency Communications
and Annunciation
Honeywell fire alarm control panels are paired with a variety of customized and effective visual, audible, and textual/
DRMNS emergency notification products. These products ensure facility occupants are notified of emergencies
and communicate action and direction for the proper response. This aids significantly in the proper accountability
of personnel during potential evacuation.
First Responder
Honeywells First Responder is a revolutionary touch screen graphical interface that simplifies
emergency scene assessment from a building lobby. Emergency responders can immediately
gather the information needed to accurately pinpoint the source of the fire and the rate at which
its spreading, enabling them to quickly locate and extinguish the fire.
Indoor/Outdoor Notification
SpectrAlert Advance is a visual/audible fire and non-fire emergency notification products line.
SpectrAlert Advance line supports indoor and outdoor use, along with different lens colors
for various emergency types.
Plug-in design; bases wire separately
Field-selectable candela settings on wall and ceiling units:
15, 15/75, 30, 75, 95, 110, 115, 145, 150, 177, 185
Captive mounting screw
Tamper resistance capability
Automatic selection of 12-or-24 volt operation at 15 and 15/75 candela
Shorting spring on mounting plate for continuity check before installation
Indoor/Outdoor
Horn/Strobe
Outdoor wall and ceiling products rated from -40F to 151F
Giant Voice
The Whelen Emergency Communication warning system is an omni-directional voice and siren warning system,
installed around an industrial facility to alert occupants and surrounding areas of emergency conditions.
One to ten omni-directional speaker cells assembled in a vertical column
Ten models, 109dBc to 129 dBc @ 100
All WPS2900 speaker cells include high efficiency 400 watt EZ-PULL speaker drivers
Power amplifiers
Tone generator
Textual/DRMNS Notification
Textual and Distributed Recipient Mass Notifications Systems (DRMNS) are a multi-faceted approach that
utilizes an organizations existing IP network as the basis for an emergency notification and communications
system. These systems also allow for specific user groups to be established so that targeted communications can be sent. In addition, they interface with the fire and gas system with relay or high-level interfaces.
Telephone
Cell Phone
Text Messaging
Email
Desktops
LED Displays
XLS120 / XLS140-2 System
XLS140-2
Fire Alarm
Control Panel
EIA-232
SLC
SLC
XLS-120
Fire Alarm
Control Panel
XLS-PRN-6 Printer
TC840M
Acclimate
Detector
TC809A1059
Monitor Module
TC806B
Photo Detector
XLS-NET
TC846A
PINNACLE
Detector
LCD2--80
Remote
Annunciator
TC807B
Ion Detector
FAAST
Aspiration
Detector
TC840C2010
Multi-Criteria
Fire/CO Detector
TC808B
Thermal Detector
TC840C
COPTIR
Detector
DNR
Duct Detector
XLS-NCA2
TC847A
Addressable
Beam Detector
FNA-3
Fire Network Adapter
TC809A
Monitor Module
TC841A
2-Wire Detector
Monitor Module
IP
S464G
Addressable
Manual Pull
Station
Honeywell Enterprise
Building Integrator
2151
Photo Detector
ACPS-610
Addressable
Charger Power Supply
P2RH
Horn/Strobe
Intelligent Devices
Intelligent 1 Loop
Complete intelligent system
Fire Alarm Control Panel
feature set with digital protocol,
318 FlashScanTM devices
9 levels of sensitivity, drift compensa-
(159 detectors and 159 modules)
per loop
Expandable to 2 SLC loops
(XLS140-2 only)
Honeywell Enterprise Buildings
Integrator (EBI) compatible
UL 864, Ninth Edition listed
Supports Honeywell CLIP and
FlashScanTM addressable devices
tion and maintenance alert, and auto
detector test
6.0 amp switch mode power supply
with four Class A/B built-in NAC
2WB
Photo Detector
HR
Horn
SCW
Strobe
Peripheral Devices
Supports Direct Connect to the
XLS-DVC Digital Voice Command
(XLS140-2 only)
XLS-NET compatible up to 102
nodes for standard networking
or 200 nodes for high speed
networking
(Notification Appliance Circuits).
Unique environment detection
Selectable System Sensor strobe
includes Pinnacle for clean
synchronization
environments, COPTIR for critical
Fully field programmable with
80-character display (includes
QWERTY keypad) or offline with
VeriFire Tools programming utility
environments, and Acclimate
a multi sensor that adjusts
sensitivity automatically
Optional universal 2040-point DACT
XLS3000 System
EIA-485
LCD-160
Display
SCS
Smoke
Control Station
Custom
Graphics
Annunciator
ACS
LED Annunciator
UDACT-2 Digital
Alarm
Communicator
EIA-232
SLC Loop
(Up to 10)
XLS-PRN-6 Printer
TC809A
Monitor Module
FAAST
Aspiration
Detector
TC906A
Photo Detector
XLS3000 Fire Alarm
Control Panel
XLS-NET
EA-CT Eclipse
Infrared Tool
XLS-NCA2
FNA-3
Fire Network Adapter
TC807B
Ion Detector
DNR
Duct Detector
TC840C2010
Multi-Criteria
Fire/CO Detector
TC840C
COPTIR
Detector
TC809A
Monitor Module
TC910R
Relay Module
IP
S464G
Addressable
Manual Pull
Station
TC910N
Control Module
Honeywell Enterprise
Building Integrator
P2RH
Horn/Strobe
Intelligent Devices
Intelligent 1 to 10 Loop
Honeywell SMART capable
Fire Alarm Control Panels
250 Eclipse devices (125 detectors
Honeywell Enterprise Buildings
and 125 modules) per loop
Integrator (EBI) compatible
Large 640-character LCD backlit
UL 864, Ninth Edition listed
display (16 lines x 40 characters)
1-10 Signaling Line Circuits
or displayless (a node on a network)
Style 4, 6 or 7
Supports Honeywell CLIP, ECLIPSE,
and FlashScan addressable devices
Point Capacity: Up to 159 detectors
XLS-NET compatible (up to 102 nodes
PF24V
ExitPointTM
with Voice
Peripheral Devices
Weekly Occupancy Schedules allow
changing sensitivity by time of day
and day of week
Optional universal 2040-point DACT
EIA-485 annunciators, including
custom graphics
Unique environment detection includes
Pinnacle for clean environments,
for high-speed networking
COPTIR for critical environments,
Application code is saved in FLASH
memory, eliminating the need
thermal, or multisensor) and 159 modules
to change EPROMs
notification, or relay) per SLC
SCW
Strobe
for standard networking or 200 nodes
(any mix of ion, photo, laser photo,
(N.O. manual stations, two-wire smoke,
HR
Horn
Supports Direct Connect to the
XLS-DVC Digital Voice Command
and Acclimate a multi sensor that
adjusts sensitivity automatically
FM6320 approved Gas Detection
System with TC809C module and
any FM approved gas detector
XLS-DVC Digital Voice Command
Up to 32
Digital Audio
Amplifiers
Background Music,
Paging and Emergency
Communication System
Input
Digital
Audio
Riser
Digital Audio
Amplifier
Low Level
Audio
Channel
Output
Outdoor Voice
Up to 4
Speaker
Circuits
Digital
Audio Loop
Firefighter
Telephone
Circuit
XLS3000 with XLS-DVC-EM
Digital Voice Command
Background Music,
Paging and Emergency
Communication System
Input
AA Series Amplifier
Low Level
Audio Channels
Low Level
Audio
Channel
Output
Outdoor Voice
Eight channels of audio messages
and five channels of fire telephones
over the digital audio loop
Digital audio loop compatible with wire,
single mode and multi-mode fiber
Up to 32 minutes of digital audio
message/tone storage
Up to 1000 audio sequences
Messages are created with standard
.wav files
Digital audio ports for direct connection with up to 32 digital amplifiers.
XLS140-2 with XLS-DVC-EM
Digital Voice Command
Two auxiliary low level audio inputs
Programmable via VeriFire Tools
programming utility
Honeywell Enterprise Buildings
Integrator (EBI) compatible
XLS-NET Compatible
Can provide analog low level audio
output for retrofit applications
Allows for multiple command centers
and expansion up to thousands
of digital amplifiers
Live paging over XLS-NET
TC810N
Control
Module
Speaker
Isolated alarm bus input for fail safe
degraded mode operation.
History buffer for local event storage
Delivers cost effective digital audio
through traditional analog amplifiers
Interface with giant voice system
for outdoor applications
SMARTTM
Panel Comparison
XLS-120
XLS140-2
XLS3000
SLC Protocol Capability
Maximum number of SLCs
Honeywell CLIP Capable
Honeywell FlashScanTM Capable
Honeywell EclipseTM Capable
SLC Autoprogram
1
Yes
Yes
No
Yes
2
Yes
Yes
No
Yes
10
Yes
Yes
Yes
Yes
EBI & Networking Compatibility
XLS-NET Compatible
Full EBI Integration
Yes
Yes
Yes
Yes
Yes
Yes
Audio Capability
Standalone Audio w/Analog Amplifiers
Standalone Audio w/Digital Amplifiers
Networked Digital Audio Capable
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Programming Options
SMARTTM Capable
Logic Zones
Releasing Zones
No
99
10
No
99
10
Yes
1000
10
200 AH
200 AH
200 AH
Yes
No
No
80 Char.
Yes
Yes
Yes
80 char.
No
Yes
Yes
640 char.
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Main Power Supply Battery Capacity
Display Options
80 Character
640 Character
Displayless
Remote LCD Annunciator
Regulatory Approvals
UL 9th Edition
ULC
FM
MEA
CSFM
City of Chicago
Properly maintaining a fire alarm system
is critical to ensure that it will work when
it is needed the most. The problem with
the average fire alarm system is that it
does little more than tell you when it has
already been compromised. Only the
Honeywell XLS3000 offers the patented
(US 7,161,481 B2) System Maintenance
Analysis Reporting Tool (SMARTTM),
which provides an unparalleled amount
of service and maintenance information
to the owner. SMARTTM is Honeywell
technology to track the required installation, inspection, testing and maintenance
frequencies of your Fire Alarm System.
SMARTTM is a software algorithm in
XLS3000 that:
Knows local (regional) testing
requirements
Verifies all system points are tested
at installation
Tracks periodic testing
Reports devices that require testing
and those coming due for service
Verifies that changes to the system
are tested, speeding recertification
Alerts building owner when testing
is required
Independently verifies to the owner
that service is being performed
SMARTTM is Honeywells way to deliver:
Piece of Mind for the Building Owner
- That the fire alarm system is
operating normally
- That the service company
is performing their work
- That interruptions to the building
activities are minimized
- That their investment is being
optimally protected
Code Compliance for:
- Fire Marshall
- Building Inspector
- On-site Safety Personnel
SMARTTM is one of many key advantages
of the Honeywell XLS3000 Fire Alarm
System when used with its revolutionary
EclipseTM family of detectors and modules.
More Information
For more information about
Honeywell Building Solutions, call
1-800-345-6770, ext. 603. Or e-mail
[email protected]
Honeywell Building Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422-3992
Tel: 1-800-345-6770, ext. 603
Outside North America:
+1-480-592-3248
www.honeywell.com
SL 53-2006-1
June 2012
Printed in U.S.A.
2012 Honeywell International Inc.
