STANDARDS ON ISO TC 67 WORK PROGRAMME LIST

TC SC WG

ISO

Title

Status Mid Feburary 2008

Project Leader

Corresponding API
Document

Corresponding
CEN/TC12 WI

ISO Stage
Target elapsed time in months
Cumulative Progress Percentage
67

13879

P&ngi - Content and drafting of a functional specification (reaffirmed till 2009)

Wright, M

67

13880

P&ngi - Content and drafting of a technical specification (reaffirmed till 2009)

Wright, M

67

13881

P&ngi - Classification and conformity assessment of products, processes and services

(technical report)(reaffirmed till 2006)

Wright, M

67

29001

Pp&ngi - Sector-specific quality management systems - Requirements for product and

service supply organisations (technical specification)(Rev. of ISO TS 29001:2003)

Durante, E

Spec Q1/ISO TS 29001

(UAP) ?

67

14224

Pp&ngi - Collection and exchange of reliability and maintenance data for equipment
(Rev. of ISO 14224:1999)

Kortner, H.

Std 689/
ISO 14224:2006

EN ISO 14224:2006

67

20815

Pp&ngi - Production assurance and reliability management

Kortner, H.

67

15546

P&ngi - Aluminium alloy drill pipe (Minor revision of ISO 15546:2002)

Polyachek, D.

EN ISO 15546:2007

67

20312

P&ngi - Recommended practice for design and operating limits of drill stem of
aluminium drill string

Polyachek, D.

prEN ISO 20312

(179)

67

27627

P&ngi - Alumimum alloy drill pipe thread connection gauging

Polyachek, D

221

67

15156-1

Milliams, D. / Tuttle, B.

(NACE MR 0175/ ISO

15156-1:2001)

EN ISO 15156-1:2001

67

15156-2

Milliams, D. / Tuttle, B.

(NACE MR 0175/
ISO 15156-2:2003)

EN ISO 15156-2:2003

67

15156-3

Milliams, D. / Tuttle, B.

(NACE MR 0175/
ISO 15156-3:2003)

EN ISO 15156-3:2003

67

23936-1

P&ngi - Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant material (incl. Cor 1:2005)
(reaffirmed till 2011)
Pp&ngi - Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (incl.
Cor 1:2005)
Pp&ngi - Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (incl. Cor
1 and 2:2005)
P&ngi - Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics

Schmitt, G

prEN ISO 23936-1

(184)

67

21457

Pp&ngi - Materials selection for upstream operations

Mollan, R

230

67

15663-1

P&ngi - Life cycle costing - Part 1: Methodology (reaffirmed till 2010)

Black, B.

EN ISO 15663-1:2006

67

15663-2

P&ngi - Life cycle costing - Part 2: Guidance on application of methodology and

calculation methods (reaffirmed till 2011)

Bang, K.E.

67

15663-3

P&ngi - Life cycle costing - Part 3: Implementation guidelines (reaffirmed till 2011)

Black, B.

67

10

P&ngi - Installation and equipment for liquefied natural gas - Ship to shore interface

prEN ISO 20815

(173)

?
(CEN/TC 282)

Registration
20.00
0
0

WD

CD

20.20 30.20
6
13
14
37

DIS

FDIS

ISO

40.20
25
60

50.20
39
84

60.60
43
100 Current %
Complete

Feb-98 Jun-99 Oct-99

100

Feb-98 Jun-99 Oct-99

100

Oct-98

Apr-00

100

Aug-97

Nov-07

100

Feb-02

Jun-05 Jun-05 Feb-07

Dec-03 Dec-04 Sep-06 Dec-06

100

Jan-04 Aug-04

Jul-05

Aug-06 Jan-08 May-08

84

Dec-06 May-07

100

Oct-07 Dec-08 Apr-09

60

Sep-06
Jan-04 Mar-05

Jul-06

Apr-06

Oct-95

Oct-98

Sep-01 Dec-01

100

Mar-97

Nov-99 Oct-01 Sep-03 Dec-03

100

Dec-99 Jan-00 Jun-00 Dec-01 Sep-03 Dec-03

100

Feb-05 Sep-05 May-06 May-07 Oct-08 Feb-09

60

May-07

Jul-99

May-08 May-09 Jul-10

Nov-10

Apr-98 Feb-99 Apr-00 Aug-00

100

Mar-99 Apr-00

Apr-01 Sep-01

100

Feb-99 Mar-00 Apr-01 Aug-01

100

Oct-06

0
Average completion 78

67

13

13623

P&ngi - Pipeline transportation systems (Rev. of ISO 13623:2000)

O'Grady, T (Gjertveit,
E.)

67

14313

P&ngi - Pipeline transportation systems - Pipeline valves (Rev. of ISO 14313:1999)

Faircloth, R

67

13847

P&ngi - Pipeline transportation systems - Welding of pipelines (incl. Cor 1:2001) (Rev.
of ISO 13847:2000)

Lillig, D

67

14723

P&ngi - Pipeline transportation systems - Subsea pipeline valves (Rev. of ISO

14723:2001)

Faircloth, R.

67

10

15590-1

P&ngi - Induction bends, fittings and flanges for pipeline transportation systems - Part
1: Induction bends (Rev. of ISO 15590-1:2001)

Schofield, B

67

10

15590-2

P&ngi - Induction bends, fittings and flanges for pipeline transportation systems - Part
2: Fittings

Schofield, B

67

10

15590-3

P&ngi - Induction bends, fittings and flanges for pipeline transportation systems - Part
3: Flanges

Henderson, M.

67

11

15589-1

P&ngi - Cathodic protection of pipeline transportation systems - Part 1: On land

pipelines

Eliassen, S.

67

11

15589-2

P&ngi - Cathodic protection of pipeline transportation systems - Part 2: Offshore

pipelines

Eliassen, S.

67

12

16708

P&ngi - Pipeline transportation systems - Reliability-based limit state methods

Sotberg, T.

EN ISO 16708:2006

67

14

21809-1

P&ngi - External coatings for buried and submerged pipelines used in pipeline
transportation systems Part 1: Polyolefin coatings (3- layer PE and 3- layer PP).

Gronsfeld, P.

ECISS/TC 29/SC 4
EC 029148

67

14

21809-2

P&ngi - External coatings for buried and submerged pipelines used in pipeline
transportation systems Part 2: Fusion-bonded epoxy coatings

Coulson, K.

EN ISO 21809-2:2007
(ECISS/TC 29/SC 4)

67

14

21809-3

P&ngi - External coatings for buried and submerged pipelines used in pipeline
transportation systems Part 3: Field joint coatings

Roche, M.

67

14

21809-4

P&ngi - External coatings for buried and submerged pipelines used in pipeline
transportation systems Part 4: Polyethylene coatings (2- layer PE)

Wong, D

67

14

21809-5

P&ngi - External coatings for buried and submerged pipelines used in pipeline
transportation systems Part 5: External concrete coatings

67

15

21329

67

16

3183

Spec 6D
/ISO 14313:1999 (mod)
Spec 1104

Spec 6DSS/
ISO 14723:2001 (mod)

EN 14161:2003
(ISO 13623:2000 mod)
(217 for revision)
EN 13942:2003
(ISO 14313:1999 mod)
(UAP (188) for revision)
EN 14163:2001
(ISO 13847:2000 mod)
(222 for revision)
EN ISO 14723:2001
(218 for revision)
EN 14870-1:2004
(ISO 15590-1:2001 mod)
(223 for revision)
EN 14870-2:2004
(ISO 15590-2:2003 mod)

NACE*

May-05

Aug-07 Aug-08 Dec-08

60

Aug-04

May-06 Sep-07 Dec-07

100

Aug-06

May-07 May-08 Jul-09

Oct-09

14

Sep-06

Jan-08 Mar-09

Jul-09

37

Aug-06

Oct-07 Dec-08 Apr-09

37

Jul-99

Feb-00 Oct-02 Aug-03 Dec-03

100

EN 14870-3:2006
(ISO 15590-3:2004 mod)

Jul-99

Apr-02 Sep-03

Nov-04

100

prEN 14919-1:2004
115 (UAP-mod)

Jun-99

Mar-00 Sep-01 Aug-03 Nov-03

100

Jun-95

Mar-00 Sep-01 Jan-04 May-04

100

Sep-98 Dec-98

Jul-01

100

prEN 14919-2:2006
183 (UAP-mod)

May-04 Dec-05 Apr-06

Dec-02 Apr-05 Sep-06 Jun-08 Oct-08

60

Jul-02 May-03 Apr-05 May-06 Sep-07 Dec-07

100

EN 10329:2006
ECISS/TC 29/SC 4

Jul-02 May-03 Apr-05

Jan-07 Aug-08 Dec-08

60

EN 10288:2002
ECISS/TC 29/SC 4

Dec-02 May-03

Jul-06

Oct-07 Dec-08 Apr-09

37

Friedman, B

ECISS/TC 29/SC 4
EC 029xxx

Jun-04

Feb-07 Feb-08 Apr-09 Aug-09

37

P&ngi - Pipeline transportation systems - Test procedures for mechanical connectors

Jee, T.

EN ISO 21329:2004

Jul-01

May-03 Jun-04 Oct-04

100

P&ngi - Steel pipe for pipeline transportation systems (Rev. of ISO 3183-1:1996; 31832:1996 and ISO 3183-3:1999)

Christensen, F
(Hammond J.)

Dec-01 Dec-02 Aug-04 May-05 Sep-06 Mar-07

100

Spec 5L/
ISO 3183:2007 (mod)

EN 10208-1:1997 EN 102082:1998
(for revision as prEN ISO 3183)
EC 029151

Jul-02

Jul-04

Average completion 73.1

Updated 19/02/2008

Page 1 of 5

TC SC WG

ISO

Title

Project Leader

Corresponding API
Document

Corresponding
CEN/TC12 WI

ISO Stage
Target elapsed time in months
Cumulative Progress Percentage
67

10414-1

P&ngi - Field testing of drilling fluids - Part 1: Water-based fluids (Rev. of ISO 104141:2001)

Stark, C.

RP 13B-1/
ISO 10414-1:2001 (mod)

189 (UAP)

67

10414-2

P&ngi - Field testing of drilling fluids - Part 2: Oil-based fluids (Rev. of ISO 104142:2002)

Stark, C.

RP 13B-2*

prEN ISO 10414-2

(180)

67

10416

P&ngi - Drilling fluids - Laboratory testing (Rev. of ISO 10416:2002)

van den Berg, H

RP 13l/
ISO 10416:2002 (mod)

(UAP) ?

67

13500

P&ngi - Drilling fluid materials - Specifications and tests (Rev. of ISO 13500:1998)
(Rev. of ISO 13500:2006)

van den Berg, H

Spec 13A/
ISO 13500:2006 (mod)

EN ISO 13500:2006
(204 for amend)

67

13501

P&ngi - Drilling fluids - Processing systems evaluation

Stark, C

RP 13C

EN ISO 13501:2006

67

10426-1

P&ngi - Cements and materials for well cementing - Part 1: Specification (rev of ISO
10426-1:2000 (incl. Amd 1:2000)) (Rev of ISO 10426-1:2005)

Bol, G.

Spec 10A/ISO 10426-1

ISO 10426-1:2001

EN ISO 10426-1:2006
(224 for revision)

67

10426-2

P&ngi - Cements and materials for well cementing - Part 2: Testing of well cements
(incl. Amd 1:2005) (incl. Corr 1:2006) (Rev of ISO 10426-2:2003)

Bol, G.

RP 10B-2/
ISO 10426-2:2003

EN ISO 10426-2:2004
(225 for revision)

67

10426-3

P&ngi - Cements and materials for well cementing - Part 3: Testing of deepwater well
cement formulations

Bol, G.

RP 10B-3/
ISO 10426-3:2003

EN ISO 10426-3:2004

67

10426-4

P&ngi - Cements and materials for well cementing - Part 4: Preparation and testing of
foamed cement slurries at atmosphere pressure (reaffirmed till 2009)

Benge, G.

RP 10B-4/
ISO 10426-4:2003

EN ISO 10426-4:2004

67

10426-5

P&ngi - Cements and materials for well cementing - Part 5: Determination of

shrinkage and expansion of well cement formulations at atmospheric pressure

Moroni, N

RP 10B-5/
ISO 10426-5:2004

EN ISO 10426-5:2005

67

10426-6

P&ngi - Cements and materials for well cementing - Part 6: Methods for determining
static gel strength of cement formulations

Mueller, D

RP 10B-6

prEN ISO 10426-6

(206)

67

10427-1

P&ngi - Equipment for well cementing - Part 1: Casing bow-spring centralizers (Rev. of
ISO 10427:1993) (reaffirmed till 2011)

De Lirette, B.

Spec 10D/
ISO 10427-1:2001

EN ISO 10427-1:2001

67

10427-2

P&ngi - Equipment for well cementing - Part 2: Centralizer placement and stop-collar
testing

De Lirette, B.

Spec 10D-2/
ISO 10427-2:2004

EN ISO 10427-2:2004

67

10427-3

P&ngi - Equipment for well cementing - Part 3: Performance testing of cementing float
equipment (Rev. of ISO 18165:2001)

Bol, G.

RP 10F/
ISO 10427-3:2003

EN ISO 10427-3:2004

67

13503-1

P&ngi - Completion fluids and materials - Part 1: Measurement of viscous properties of Penny, G.
completion fluids

RP 13M/
ISO 13503-1:2003

EN ISO 13503-1:2005

67

13503-2

P&ngi - Completion fluids and materials - Part 2: Measurement of properties of

proppants used in hydraulic fracturing and gravel packing operations

Penny, G.

RP 19 xx

prEN ISO 13503-2:2006

(216 for amend)

67

13503-3

P&ngi - Completion fluids and materials - Part 3: Testing of heavy brines

Penny, G.

RP 13J/
ISO 13503-3:2005

EN ISO 13503-3:2005

67

13503-4

P&ngi - Completion fluids and materials - Part 4: Procedure for measuring stimulation
and gravel pack fluid leak off under static conditions

Asadi, M

RP 13M-4/
ISO 13503-4:2004

EN ISO 13503-4:2006

67

13503-5

P&ngi - Completion fluids and materials - Part 5: Procedures for measuring the long
term conductivity of proppants

Kaufman, P

EN ISO 13503-5:2006

Registration
20.00
0
0

WD

CD

20.20 30.20
6
13
14
37

DIS

FDIS

ISO

40.20
25
60

50.20
39
84

60.60
43
100 Current %
Complete

Apr-05

Sep-05 Sep-06 Apr-08

84

Jan-05

Nov-05 Nov-08 Mar-09

60

Apr-05

Dec-05 Jan-08 May-08

84

Mar-07

Oct-08 Feb-09

60

Sep-96 Dec-04 Sep-05 Dec-05

100

Apr-07

Jan-08 Feb-09 Jun-09

60

Apr-07

Sep-08 Nov-09 Mar-10

37

Nov-04

Jul-07

Feb-01

Mar-02

Aug-03

100

Sep-01

Oct-02

Mar-04

100

Mar-03 Jun-03

Oct-03

Dec-04

100

Oct-05

Oct-06 Mar-08

Jul-08

60

Oct-97

Jul-99

Jun-01 Oct-01

100

Jun-99

Oct-02

Sep-02

Jan-04 May-04

100

Dec-02 Apr-03

100

Jan-96 Sep-99 May-01 Mar-02

Sep-03

100

Aug-04 Jun-06 Nov-06

100

Nov-03

Jul-04

Sep-05 Dec-05

100

May-04

Oct-04

Jun-06 Oct-06

100

Feb-02

Jul-04

Dec-04 Feb-06

Jul-06

100

Average completion 86.6

Updated 19/02/2008

Page 2 of 5

TC SC WG

ISO

Title

Project Leader

Corresponding API
Document

Corresponding
CEN/TC12 WI

ISO Stage
Target elapsed time in months
Cumulative Progress Percentage
67

Compact flanged connections

Eriksen, T.

67

10407-1

27509

P&ngi - Rotary drilling equipment - Part 1: Drill stem design and operating limits (Rev.
of ISO 10407:1993)

Chandler, B

67

10407-2

P&ngi - Rotary drilling equipment - Part 2: Inspection and classification of drill stem
elements (Rev. of ISO 10407:1993)

Mackin, J.

67

10424-1

P&ngi - Rotary drilling equipment - Part 1: Rotary drill stem elements

Brinegar, D.

67

10424-2

P&ngi - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered
thread connections

67

13534

67

13535

67

67

67

241
RP 7G*

92

RP 7G*

93

Spec 7-1/
ISO 10424-1:2004 (mod)

EN ISO 10424-1:2004

Collins, T

Spec 7*

EN ISO 10424-2:2007

P&ngi - Drilling and production equipment - Inspection, maintenance, repair and

remanufacture of hoisting equipment (Rev. of ISO 13534:2000) (API/ISO Editing
Agreement Pilot)
P&ngi - Drilling and production equipment - Hoisting equipment (Rev. of ISO
13535:2000) (API/ISO Editing Agreement Pilot)

Aker, A.

RP 8B/
ISO 13534:2000

Aker, A.

13626

P&ngi - Drilling and production equipment - Drilling and well servicing structures

(McLeod, M)

14693

P&ngi - Drilling and well-servicing equipment

13533

67

67

67

Registration
20.00
0
0

WD

CD

20.20 30.20
6
13
14
37

DIS

FDIS

ISO

40.20
25
60

50.20
39
84

60.60
43
100 Current %
Complete

Oct-07
Jan-95

0
Apr-99

Jan-05 Oct-07 Dec-08 Apr-09

37

May-95 Apr-99

Oct-04

Jul-08

60

Mar-00 Apr-98

Jan-02 Feb-03 May-04 Sep-04

100

Jun-06 Mar-08

Mar-00 Apr-98 Dec-02 Apr-04

Apr-06 Nov-07

100

EN ISO 13534:2000
(186 for revision)

Apr-05

Jul-07

Sep-08 Jan-09

14

Spec 8C/
ISO 13535:2000 mod

EN ISO 13535:2000
(187 for revision)

Apr-05

Jul-07

Sep-08 Jan-09

14

Spec 4F**

EN ISO 13626:2004

Oct-00

Jan-98 Jun-98 Nov-00

Nov-03

100

(Sibille, M.)

Spec 7K/
ISO 14693:2003 (mod)

EN ISO 14693:2003

Oct-00

Jan-98 May-99 Jun-00 Sep-03 Dec-03

100

P&ngi - Drilling and production equipment - Drill through equipment (incl. Cor 1:2005)
(reaffirmed till 2011)

Young, K.

Spec 16A/
ISO 13533:2001 (mod)

EN ISO 13533:2001

13624-1

P&ngi - Drilling well control systems - Part 1: Design and operation of marine drilling
riser systems

Stanton, P.

RP 16Q

prEN ISO 13624-1

(49)

13624-2

P&ngi - Drilling well control systems - Part 2: Application of marine drilling riser system
analysis (Technical Report)

Stanton, P.

TR 16TR1

(UAP) ?

13625

P&ngi - Drilling and production equipment - Marine drilling riser couplings

Stanton, P.

Spec 16R*

EN ISO 13625:2002

67

22830

P&ngi - Drilling well control equipment - Control systems for drilling well control
equipment and diverter systems (to be deleted?)

Roche, J.

Spec 16D

203

67

10423

Langereis, R

Spec 6A/
ISO 10423:2003 (mod)

EN ISO 10423:2004
(193 for revision)

67

10417

P&ngi - Drilling and production equipment - Wellhead and christmas tree equipment
(Rev. of ISO 10423:1994)(Minor revision of ISO 10423:2001 in 2003)(Rev. of ISO
10423:2003)
P&ngi - Subsurface safety valve systems - Design, installation, repair, operation and
redress (Rev. of ISO 10417:1993)

Freeman, A.

RP 14B/
ISO 10417:2004

EN ISO 10417:2004

67

10428

P&ngi - Drilling and production equipment - Sucker rods (pony rods, polished rods,
couplings and sub-couplings) (Rev. of ISO 10428:1993)

Williams, B

Spec 11B

prEN ISO 10428

(15)

67

10431

P&ngi - Drilling and production equipment - Pumping units (Rev of ISO 10431:1993)

Dijkhuis, B.

Spec 11E

prEN ISO 10431

(16)

67

10432

P&ngi - Downhole equipment - Subsurface safety valve equipment ( Rev. of ISO

10432:1993) (Rev. of ISO 10432:1999)

Dijkhuis, B.

Spec 14A/
ISO 10432:2004

EN ISO 10432:2004

67

14310

P&ngi - Downhole equipment - Packers and bridge plugs (Rev. of ISO 14310:2001)

Ellis, G.

Spec 11D1/
ISO 14310:2004

67

15136-1

Downhole equipment for p&ngi - Progressive cavity pump systems for artificial lift Part 1: Pumps (Rev. of ISO 15136-2:2001)

Noonan, S

(Spec 11D2/
ISO 15136-1)*

67

15136-2

Downhole equipment for p&ngi - Progressive cavity pump systems for artificial lift Part 2: Surface drive systems

Stephenson, G.

67

16070

P&ngi - Downhole equipment - Lock mandrels and landing nipples (Rev. of ISO
16070:2001)

Yonker, J.

Spec 14L/ISO 16070:2005

EN ISO 16070:2005

67

17078-1

P&ngi - Drilling and production equipment - Part 1: Side-pocket mandrels

Mabry, W.

Spec 11V1

EN ISO 17078-1:2004

67

17078-2

P&ngi - Drilling and production equipment - Part 2: Flow control devices for sidepocket mandrels

Mabry, W.

Spec 11V2

EN ISO 17078-2:2007

67

17078-3

P&ngi - Drilling and production equipment - Part 3: Latches and related tools for sidepocket mandrels

Mabry, W.

prEN ISO 17078-3

(119)

67

17078-4

P&ngi - Drilling and production equipment - Part 4: Practices for side-pocket mandrels
and related equipment

Mabry, W.

205

67

17824

P&ngi - Downhole equipment - Sand control screens

Gillespie, G.

67

28781

P&ngi - Downhole equipment - Subsurface tubing mounted formation barrier valves

and related equipment

McCalvin, D.

67

11326

P&ngi - Specification for flexible pipe ancillary equipment

Doynov, K.

243

67

11355

P&ngi - Recommended practice for flexible pipe ancillary equipment

Doynov, K.

244

67

13628-1

Bakke, W. (to become

Dahl, P.R.)

67

13628-2

P&ngi - Design and operation of subsea production systems - Part 1: General

requirements and recommendations (Rev. of ISO 13628-1:1999) (Amd. 1 and Amd. 2
of ISO 13628-1:2005)
P&ngi - Design and operation of subsea production systems - Part 2: Unbonded
flexible pipe systems for subsea and marine applications (Rev. of ISO 13628-2:2000)

67

13628-3

P&ngi - Design and operation of subsea production systems - Part 3: Through flowline
(TFL) systems (reaffirmed till 2010)

67

13628-4

67

67

67
67

Jul-01

Dec-01

100

Nov-08

60

May-03 Sep-03 Apr-07

Dec-08

37

Jan-95 Mar-98 Feb-99 Jun-01 Aug-02 Dec-02

100

Nov-04

Feb-05 Dec-06 Feb-08 Jun-08

37

Sep-05

Nov-07 Jan-09 May-09

37

Jan-95 Mar-98 Nov-01 Jun-02 Mar-04

Jul-04

100

Jun-00 Feb-01

Oct-07 Dec-08 Apr-09

60

Jun-00 Feb-01

Oct-06 Aug-08 Dec-08

60

Jul-03

Sep-04 Dec-04

100

EN ISO 14310:2001
(209 for revision)

May-06

Mar-07 Aug-08 Dec-08

60

EN ISO 15136-1 :2001

(210 for revision)

Dec-06

x
220

RP 17A/
ISO 13628-1:2005

EN ISO 13628-1:2005
(215 and 238 for amend)

Doynov, K.

Spec 17J*

EN ISO 13628-2:2006

Yonker, J.

RP 17C/
ISO 13628-3:2000

EN ISO 13628-3:2000

P&ngi - Design and operation of subsea production systems - Part 4: Subsea wellhead
and tree equipment (Rev. of ISO 13628-4:1999)

Frazer, R

Spec 17D*

EN ISO 13628-4:1999
(160 for revision)

13628-5

P&ngi - Design and operation of subsea production systems - Part 5: Subsea control
umbilicals (Rev. of ISO 13628-5:2002)

Dee, R

Spec 17E/
ISO 13628-5:2002

202

13628-6

P&ngi - Design and operation of subsea production systems - Part 6: Subsea

production control systems (Rev. of ISO 13628-6:2000)

Neuenkirchen, J.H.

Spec 17F/
ISO 13628-6:2006

EN ISO 13628-6:2006

13628-7

P&ngi - Design and operation of subsea production systems - Part 7:

Completion/workover riser systems

13628-8

67

67

67

67

Muff, A.

RP 17G/
ISO 13628-7:2005

EN ISO 13628-7:2006

P&ngi - Design and operation of subsea production systems - Part 8: Remotely

Operated Vehicle (ROV) interfaces on subsea production systems (incl. Cor 1:2005)(to
be replaced by ISO 13628-13)
13628-9 P&ngi - Design and operation of subsea production systems - Part 9: Remotely
Operated Tool (ROT) intervention systems(reaffirmed till 2010)(to be replaced by ISO
13628-13)
13628-10 P&ngi - Design and operation of subsea production systems - Part 10: Specification for
bonded flexible pipe (API Pilot Project)

Marsh, T.

RP 17H/
ISO 13628-8:2006

EN ISO 13628-8:2006

Brun-Olsen, J.

RP 17M/
ISO 13628-9:2000

EN ISO 13628-9:2006

Doynov, K.

Spec 17K/
ISO 13628-10:2005

EN ISO 13628-10:2006

13628-11 P&ngi - Design and operation of subsea production systems - Part 11: Flexible pipe
systems for subsea and marine applications (Rev. of ISO 10420:1994)

Doynov, K.

RP17B*

166 (UAP)

13628-12 P&ngi - Design and operation of subsea production systems - Part 12: Dynamic
production risers

Stanton, P.

RP 2RD

214

67

Brun-Olsen, J.

RP 17H / ISO 13628-8

RP 17M / ISO 13628-9
to be RP 17R
?

208

67

13628-13 P&ngi - Design and operation of subsea production systems - Part 13: Remotely
operated tools and interfaces on subsea production systems (replacing ISO 13628-8
and ISO 13628-9)
13628-15 P&ngi - Design and operation of subsea production systems - Part 15: Subsea
structures and manifolds

Brubrek, B

Apr-99

May-07 Jul-08

Dec-01 Jan-03

EN ISO 15136-2:2006

Mar-01 Mar-98
May-03 Mar-98

240

Oct-99

Jan-02

Oct-03

Dec-07 Feb-09 Jun-09

37

Dec-04 Feb-06 Jun-06

100

Apr-04

Jun-05 Dec-05

100

Sep-99 Nov-98 Mar-02 Mar-03 Sep-04 Dec-04

100

Sep-99 Feb-01 Mar-05 Oct-05 Sep-07 Dec-07

100

May-03 Nov-01 May-06 Aug-07 Oct-08 Feb-09

60

May-05 Feb-06 Apr-07

Apr-08

Jun-09 Oct-09

37

May-03 Feb-02 Apr-07

Apr-08

Jun-09 Oct-09

37

Nov-06

Apr-09

Jun-10 Nov-10

Apr-08

Sep-07

Sep-07

Mar-07

Oct-07 Dec-08 Apr-09

37

Jun-03 Jun-03

Jan-04

Jul-06

100

Jan-98

Apr-98

Apr-06

Jan-99 Aug-00 Dec-00

100

Aug-04

Sep-06 Apr-09 Aug-09

60

Jan-05

Aug-07 Aug-08 Dec-08

60

Mar-01 Nov-02

Jan-04 Jan-06 May-06

100

Jan-95 Mar-98 Apr-00 Nov-01

Jan-95

Nov-05

100

Jul-99

Jul-00

Sep-02 Dec-02

100

Nov-95 Sep-97

Jul-98

Mar-00 Jun-00

100

Jul-03

Jun-05 Oct-05

100

Jul-96

Apr-03
Jun-03 Oct-03
Sep-06
Apr-06

Jun-07

Apr-06

Feb-04 May-07 Sep-07

100

Sep-07 Sep-08 Oct-09 Mar-10

14

Nov-07 Jan-09 May-09

14

0
Average completion 62.9

Updated 19/02/2008

Page 3 of 5

TC SC WG

ISO

Title

Project Leader

Corresponding API
Document

Corresponding
CEN/TC12 WI

ISO Stage
Target elapsed time in months
Cumulative Progress Percentage

Registration
20.00
0
0

WD

CD

20.20 30.20
6
13
14
37

67

10405

P&ngi - Care and use of casing and tubing (Rev. of ISO 10405:1993)(reaffirmed till
2010)

Bellinger, B

RP 5C1

EN ISO 10405:2006

67

11960

P&ngi - Steel pipes for use as casing or tubing for wells (Rev. of ISO 11960:1996)
(incl. Cor 1:11/2002)(Rev. of ISO 11960:2001) (in revision)

Fallouey, P.

Spec 5CT/
ISO 11960:2004

EN ISO 11960:2004
(232 for revision)

Dec-01 Jun-02

67

11961

P&ngi - Drill pipe with weld-on tool joints (Rev. of ISO 11961:1996)

Fallouey, P.

Spec 5D/
Spec 7

EN ISO 11961:1996
(66 for revision)

May-06

67

15463

P&ngi - Field inspection of new casing, tubing and plain-end drill pipe

Goodson, D.

RP 5A5/
ISO 15463:2004

EN ISO 15463:2003

67

15464

P&ngi - Gauging and inspection of casing, tubing and line pipe threads (technical
report)

Della Pina, G.

RP 5B1

31

67

2b

10400

P&ngi - Equations and calculation for the properties casing, tubing, drill pipe and line
pipe used as casing or tubing (Rev. of ISO 10400:1993)(technical report)

Patillo, P

Bul 5C3*

(UAP) ?

67

2a

13679

P&ngi - Procedures for testing casing and tubing connections (rev. of ISO 13679:2002)

Valigura, G.

RP 5C5/ISO 13679:2002

EN ISO 13679:2006
(219 for revision)

May-06

67

13680

P&ngi - Corrosion resistant alloy seamless tubes for use as casing, tubing and coupling Della Pina, G.
stock (Rev. of ISO 13680:2000) (incl. Cor 2:5/2004)

(RP 5CRA)**

EN ISO 13680:2001
(150 for revision)

67

13678

P&ngi - Evaluation and testing of thread compounds for use with casing, tubing and
line pipe (incl. Cor 1:2005) (Rev. of ISO 13678:2000 new title to add "and drill stem
elements")

Mulvihill, M

RP 5A3/
ISO 13678:2000

prEN ISO 13678

(197)

67

10418

P&ngi - Offshore production installations - Basic surface process safety systems (Rev.
of ISO 10418:1993)

Black, B.

RP 14C

EN ISO 10418:2003

67

13702

P&ngi - Control and mitigation of fires and explosions on offshore production

installations - Requirements and guidelines (reaffirmed till 2009)

Ellingsen, S.

RP 14G

EN ISO 13702:1999

67

15544

P&ngi - Offshore production installations - Requirements and guidelines for emergency

response (reaffirmed till 2010)(Amd. of ISO 15544:2000)

Savage, N.

67

17776

P&ngi - Offshore production installations - Guidelines on tools and techniques for

hazard identification and risk assessment (reaffirmed till 2010)

Vinnem, J.E., N.

RP 14J

EN ISO 17776:2002

67

10438-1

Pp&ngi - Lubrication, shaft sealing and control-oil systems and auxiliaries - Part 1:
General requirements (Rev. of ISO 10438-1:2003)

Fulton, L

Std 614

EN ISO 10438-1:2007

67

10438-2

Pp&ngi - Lubrication, shaft sealing and control-oil systems and auxiliaries - Part 2:
Special-purpose oil systems (Rev. of ISO 10438-2:2003)

Fulton, L

Std 614

EN ISO 10438-2:2007

67

10438-3

Pp&ngi - Lubrication, shaft sealing and control-oil systems and auxiliaries - Part 3:
Genera-purpose oil systems (Rev. of ISO 10438-3:2003)

Fulton, L

Std 614

EN ISO 10438-3:2007

67

10438-4

Pp&ngi - Lubrication, shaft sealing and control-oil systems and auxiliaries - Part 4: Self- Fulton, L
acting gas seal systems (Rev. of ISO 10438-4:2003)

Std 614

EN ISO 10438-4:2007

67

10437

P&ngi - Steam turbines - Special-purpose applications (Rev. of ISO 10437:1993)(Rev.

of ISO 10437:2003)

Wilkinson, V.

Std 612
/ISO 10437:2003

EN ISO 10437:2003
(231 for revision)

67

13703

P&ngi - Design and installation of piping systems on offshore production platforms

(incl. Cor 1:7/2002)(reaffirmed till 2010)

Milnes, J.

RP 14E

EN ISO 13703:2000

67

14692-1

P&ngi - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols,

applications and materials (Rev. of ISO 14692-1:2002)

Frost, S.

67

14692-2

P&ngi - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture

(incl. Cor 1:2005) (Rev. of ISO 14692-2:2002)

67

14692-3

67

14692-4

67

67

67

DIS

FDIS

ISO

40.20
25
60

50.20
39
84

60.60
43
100 Current %
Complete

Sep-98 Oct-98

Mar-00

100

Aug-03 Sep-04 Dec-04

100

Mar-04 Aug-06 Mar-08

Jul-08

60

May-97 Jun-98 Dec-98 Dec-98 Sep-03 Dec-03

100

May-06

Dec-08

14

Jun-08

Jan-99 Jan-01 Aug-02 Feb-06

Nov-07

100

Mar-08 Mar-09 May-10 Sep-10

14

May-06

Dec-06 Jun-08 Oct-08

60

Jan-06

Sep-06 Aug-07 Oct-08 Feb-09

60

Jan-01

Aug-99 Feb-01 Jun-03 Sep-03

100

Feb-95 Jun-96 Nov-98 Mar-99

100

Sep-07

Nov-08 Jan-10 May-10

37

Jul-99

Oct-00

100

Jun-04

Sep-04 Apr-06 Sep-07 Dec-07

100

Jun-04

Sep-04 Apr-06 Sep-07 Dec-07

100

Jun-04

Sep-04 Apr-06 Sep-07 Dec-07

100

Average completion 67.6

201 (UAP)***

Jun-04

Sep-04 Apr-06 Sep-07 Dec-07

100

Sep-07

Sep-08 Mar-09 Mar-10 May-10

Jun-94 Sep-98 Aug-00 Dec-00

100

EN ISO 14692-1:2002
(234 for revision)

Sep-07

Sep-08 Mar-09 Mar-10 May-10

Frost, S.

EN ISO 14692-2:2002
(235 for revision)

Sep-07

Sep-08 Mar-09 Mar-10 May-10

P&ngi - Glass-reinforced plastics (GRP) piping - Part 3: System design (incl. Cor
1:2005) (Rev. of ISO 14692-3:2002)

Frost, S.

EN ISO 14692-3:2002
(236 for revision)

Sep-07

Sep-08 Mar-09 Mar-10 May-10

P&ngi - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and

operation (Rev. of ISO 14692-4:2002)

Frost, S.

EN ISO 14692-4:2002
(237 for revision)

Sep-07

Sep-08 Mar-09 Mar-10 May-10

15649

P&ngi - Piping (reaffirmed till 2011)

Zezula, F.

24817

Pp&ngi - Composite repairs for pipework - Qualification and design, installation, testing
and inspection (technical specification)

Evans, G.

13704

Pp&ngi - Calculation of heater-tube thickness in petroleum refineries (incl. Cor 1:2004)

(Rev. of ISO 13704:2001)

Gelfand, D.

RP 530/ISO 13704:2001

EN ISO 13704:2007

67

13705

Pp&ngi - Fired heaters for general refinery service (Rev. of ISO 13705:2001)

Riddick, E.

Std 560*
ISO 13705:2006

EN ISO 13705:2006

67

13706

Pp&ngi - Air-cooled heat exchangers (Rev. of ISO 13706:2000) (Rev. of ISO

13706:2005)

Kluppel, G

Std 661/ISO 13706:2005

EN ISO 13706:2005
(226 for revision)

67

15547-1

Pp&ngi - Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers (Rev.

of ISO 15547:2000)

Petigara, J.

Std 662 Part 1/ISO 155471:2005

EN ISO 15547-1:2005

67

15547-2

Pp&ngi - Plate-type heat exchangers Part 2: Brazed aluminium plate-fin heat

exchangers

Petigara, J.

Std 662 Part 2/ISO 155472:2005

EN ISO 15547-2:2005

67

16812

Pp&ngi - Shell-and-tube heat exchangers (Rev. of ISO 16812:2002)

Petigara, J.

Std 660/ISO 16812:2007

EN ISO 16812:2007

67

25457

Pp&ngi - Flares details for general refinery and petrochemical service

Wey, R

Std 537

prEN ISO 25457

(196)

67

10441

Pp&ngi - Flexible couplings for mechanical power transmission - Special purpose

applications (Rev. of ISO 10441:1999)

Gibbons, B

Std 671/ISO 10441:2007

EN ISO 10441:2007

67

14691

Pp&ngi - Flexible couplings for mechanical power transmission - General purpose

applications (Rev. of ISO 14691:1999)

Simmons, P

EN ISO 14691:2000
(128 for revision)

67

11

15138

P&ngi - Offshore production installations - Heating, ventilation and air-conditioning

(incl. Cor 1:2001) (Rev. of ISO 15138:2000)

Uldalen, S.

EN ISO 15138:2007

67

11

27469

Pp&ngi - Method of test for offshore fire dampers (technical specification)

Swinton, G.

(UAP) ?

67

12

23251

Pp&ngi - Pressure-relieving and depressuring systems (Rev. of ISO 23251:2006)

Otis, B.

67

12

28300

Pp&ngi - Venting of atmospheric and low-pressure storage tanks

Davies, M.

(ASME B31.3)

CEN/TR 14549:2004
(UAP) ?

Std 521/ISO 23251:2005

Std 2000

EN ISO 23251:2007
(227 for revision and 239 for
amend)
prEN ISO 28300
(213)

Oct-99

Apr-00 Feb-01 Jun-01

100

Aug-05 Feb-06 Jun-06

Dec-06

100

Mar-03 Apr-03

Apr-06 Aug-07 Dec-07

100

Mar-03 Apr-03

Jan-05 Aug-06 Nov-06

100

Apr-07

Oct-08

Oct-09 Feb-10

37

Nov-00 Apr-03

Jun-04

Jul-05

Nov-05

100

Nov-00 Apr-03

Jun-04

Jul-05

Nov-05

100

Mar-03 Apr-03

Jun-05 Nov-06 Feb-07

100

Oct-05

Oct-05

Feb-07 Aug-08 Dec-08

60

Nov-00 Jan-02

Sep-05 Nov-06 Mar-07

100

Mar-07

Oct-07 Dec-08 Apr-09

60

Oct-04

Oct-04 Dec-05 Sep-06 Sep-07 Dec-07

100

Jun-06
Mar-07

Sep-06 Oct-06

Apr-08

Dec-08

Jan-08 May-08

84

Nov-06 Jan-08 May-08

84

Average completion 71.1

Updated 19/02/2008

Page 4 of 5

TC SC WG

ISO

Title

Project Leader

Corresponding API
Document

Corresponding
CEN/TC12 WI

ISO Stage
Target elapsed time in months
Cumulative Progress Percentage
67

19900

P&ngi - General requirements for offshore structures (Rev. of ISO 13819-1:1995)

Snell, R.

EN ISO 19900:2002

67

19901-1

P&ngi - Specific requirements for offshore structures - Part 1: Metocean design and
operating considerations

Shaw, C.

EN ISO 19901-1:2005

67

19901-2

P&ngi - Specific requirements for offshore structures - Part 2: Seismic design

procedures and criteria

Banon, C.

EN ISO 19901-2:2004

67

19901-3

P&ngi - Specific requirements for offshore structures - Part 3: Topsides structure

Galbraith, D.N.

67

19901-4

P&ngi - Specific requirements for offshore structures - Part 4: Geotechnical and

foundation design considerations

Lacasse, S.

EN ISO 19901-4:2003

67

19901-5

P&ngi - Specific requirements for offshore structures - Part 5: Weight control during
engineering and construction

Worren, E.

EN ISO 19901-5:2003

67

19901-6

P&ngi - Specific requirements for offshore structures - Part 6: Marine operations

Wichers, J.

prEN ISO 19901-6

(137)

67

19901-7

P&ngi - Specific requirements for offshore structures - Part 7: Stationkeeping for

floating offshore structures and mobile offshore units (Replacing ISO TR 13637:1997)

Wolfram, R.

67

19902

P&ngi - Fixed steel offshore structures (Rev. of ISO 13819-2:1995)

Galbraith, D.N.

67

19903

P&ngi - Fixed concrete offshore structures

Leivestad, S.

EN ISO 19903:2006

67

19904-1

P&ngi - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars

Wolfram, R.

EN ISO 19904-1:2006

67

19904-2

P&ngi - Floating offshore structures - Part 2: Tension leg platforms

Wolfram, R.

67

19905-1

P&ngi - Site-specific assessment of mobile offshore units - Part 1: Jack-ups

Hoyle, M.J.R.

123

67

19905-2

P&ngi - Site specific assessment of mobile offshore units - Part 2: Jack-ups

commentary (Technical Report)

Hoyle, M.J.R.

124

67

19906

P&ngi - Arctic offshore structures

Blanchet, D

154

prEN ISO 19901-3

(136)

RP 2SK

EN ISO 19901-7:2005

RP 2A-LRFD

EN ISO 19902:2007

RP 2T

Registration
20.00
0
0

WD

CD

20.20 30.20
6
13
14
37

Jan-01

DIS

FDIS

ISO

40.20
25
60

50.20
39
84

60.60
43
100 Current %
Complete

Aug-01 Aug-02 Dec-02

100

May-01 Jan-00 Jan-01 Sep-03

Jul-05

Nov-05

100

Jan-01 Feb-00 Jan-01

Apr-03

Jul-04

Nov-04

100

Jun-07

Apr-09 Aug-09

60

Dec-00 Mar-03 Aug-03

100

Oct-01

Oct-00

Jul-00

Dec-99

Oct-02

Jul-00

Sep-97 Jan-00 Mar-01 Apr-03

Jul-03

100

Jul-00

Dec-01 Apr-05 Mar-06 Aug-08 Dec-08

60

Dec-05

100

May-96 Nov-95 May-99 Sep-04 Aug-07 Dec-07

Jun-03 Jun-03

Mar-04

Jul-05

100

Jan-95 Jun-01 Nov-02 Oct-04 Aug-06 Dec-06

100

Dec-00

100

Feb-02 Nov-04 Jun-06 Nov-06

0
Jun-00 Jan-02 Jun-05 Nov-07 Jan-09 May-09

37

Jun-00

May-09

14

Dec-01 Nov-01 Nov-07 Nov-08 Jan-10 May-10

37

Jul-01

Average completion 73.9

60

11

13691

P&ngi - High-speed special-purpose gear units (reaffirmed till 2011)

Dehner, E.

Std 613

EN ISO 13691:2002

115

13710

Pp&ngi Reciprocating positive displacement pumps

Saile, D

Std 674*

EN ISO 13710:2004

115

13709

Centrifugal pumps for petroleum, petrochemical and natural gas industries (Rev. of
ISO 13709:2003)

Jones, R

Std 610/
ISO 13709:2003

EN ISO 13709:2003
(182 for revision)

Mar-05

115

21049

Pumps - Shaft sealing systems for centrifugal and rotary pumps (Rev. of ISO
21049:2004)

Thorp, J.

Std 682/
ISO 21049:2004

EN ISO 21049:2004
(228 for revision)

Apr-07

Aug-08 Oct-09 Feb-10

37

118

10439

Petroleum, chemical and gas service industries - Centrifugal compressors

Savoie, K
(Noack, P.R.)

Std 617

EN ISO 10439:2002

118

10442

Petroleum, chemical and gas service industries - Packaged integrally geared

centrifugal air compressors

Noack, P.R.

Std 672

EN ISO 10442:2002

118

13631

P&ngi - Packaged reciprocating gas compressors

Autran, P.

Spec 11P

EN ISO 13631:2002

118

13707

P&ngi - Reciprocating compressors (Rev. of ISO 13707:2000)

Lea, F

Std 618*

44

118

10440-1

P&ngi - Rotary-type positive displacement compressors - Part 1: Process compressors

(oil-free) (Rev. of ISO 10440-1:2000)

Rohacek, M

Std 619

EN ISO 10440-1:2007
(142 for revision)

118

10440-2

P&ngi - Rotary-type positive displacement compressors - Part 2: Packaged air

compressors (oil-free)(reaffirmed till 2011)

Frost, F.

153

10434

Bolted bonnet steel gate valves for petroleum and natural gas industries (Rev. of ISO
10434:1998) (Rev. of ISO 10434:2004)

McLean, B.

Std 600/
ISO 10434:2001 (mod)

153

15761

Steel gate, globe and check valves for sizes DN 100 and smaller, for petroleum and
natural gas industries (Rev. of ISO 15761:2002)

McLean, B.

153

11

17292

Metal ball valves for petroleum, petrochemical and allied industries (reaffirmed till
2012)

McLean, B.

192

3977-5

Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas
industries (reaffirmed till 2011)

Heseding, M.

Jul-93

Jan-98 Feb-00 Aug-01 Dec-01

100

Aug-01

Mar-97

Jul-04

100

Sep-07 Sep-08 Dec-08

60

Jul-99

Mar-04

Jan-00

Mar-94 Jun-96

Oct-02

100

Aug-01

Jun-94 Nov-96 Aug-02 Dec-02

100

Jun-00

May-97 Aug-00 Mar-02 Aug-02

100

May-08 Jul-09

Nov-10

14

Aug-01

Jun-02 May-04 Apr-07 Aug-07

100

Jul-93

Aug-94 Nov-95

Dec-01

100

EN ISO 10434:2004
(CEN/TC 69 WI 129)

Jan-06

Jun-07 Jun-08 Aug-09 Dec-09

37

Std 602/
ISO 15761:2002 (mod)

EN ISO 15761:2002
(207 for revision)

Jan-06

Jun-07 Jun-08 Aug-09 Dec-09

37

Std 608

EN ISO 17292:2004
(CEN/TC 69)

Sep-88

Apr-01 May-02 Apr-04 Aug-04

100

Std 616 & RP 11 PGT

(adopted as ASME B.133)

EN ISO 3977-5:2003

Nov-94

Jun-95 Aug-98 Aug-01 Dec-01

100

EN ISO 10440-2:2001

Mar-03 Apr-03

Jul-02

Jul-01

Average completion 77.5

Overall completion 72.2

Note: Future estimated dates are my personal "best estimates" and have not all been directly taken from the ISO/TC 67 database, available via http://www.tc67.net.
(They will need verifying with the responsible person).
Note : P&ngi = Petroleum and natural gas industries
Pp&ngi = Petroleum, petrochemical and natural gas industries
* = adopt back planned by API
** = adopt back approved by API, but not yet published
*** = approved for publication by CEN
- ISO/TC67 portfolio : 164
- ISOs published : 131 (of which 3 are still the fasttrack revision). i.e. 128 true ISOs.
The 3 fasttrack standards are: (SC4) 10407; 10428 and 10431
- Published ISOs in revision : 38
- CEN published adoptions : 108
- API published adoptions : 53
- Adoptions by both API and CEN : 47
- NACE published adoptions : 3
- ISO possibles for publication in 2008: 19
- This may bring number of true published ISOs, excluding the orignal fasttracks, to 135 end 2008
- Other API adoptions:
ISO/TC105, API Spec 9A/ISO 10425:2003 Wire rope
ISO/TC153, API Std 607/ISO 10497:2004 Testing of valves - Fire type-testing requirements
ISO/TC28, API MPMS 2.2C/ISO 7507-3:1993 Calibration of upright cylindrical tanks using the optical-triangulation method (no recognition in document)
ISO/TC28, API MPMS 2.2D/ISO 7507-4:1995 Calibration of upright cylindrical tanks using the internal electro-optical distance-ranging method (no recognition in document)
ISO/TC28, API MPMS 2.2E/ISO 12917-1 2002 Petroleumn and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods
ISO/TC28, API MPMS 2.2F/ISO 12917-2 2002 Petroleumn and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method
Drafted by Neil Reeve, Shell Standards Team, SGSI, The Hague, 12/02/2008

Updated 19/02/2008

Page 5 of 5