KOUKAMMA MUNICIPALITY MOUNTAIN VIEW MULTIPURPOSE COMMUNITY CENTRE
ITEM No.
PAY
REF
DESCRIPTION
PRICING DATA
UNIT
QTY
RATE
AMOUNT
SECTION F : BUILDING WORKS
NOTE: Section F : Building have been measured in
accordance with the "Standard System of Measuring
Builders Work 1999 (Sixth Edition - Revised)" as issued
by the Association of South African Quantity Surveyors
F1
PSBA
BRICKWORK
F1.1
Brickwork of NFP bricks (7 MPa nominal compressive
strength) in class II mortar including all ties:
F1.1.1
Half brick walls with 75 mm wide brick reinforcement every
fourth course
m2
100
One brick walls with 150 mm wide brick reinforcement every
fourth course
m2
80
245 mm Hollow walls of two one brick skins with expansion
joints between skins
m2
50
270 mm Hollow walls of two one brick skins with expansion
joints between skins
m2
650
405 mm Hollow walls of one half brick skin and one one brick
wall with expansion joints between skins
m2
100
F1.1.2
F1.1.3
B2.2
F1.1.4
B2.2.1
F1.1.5
F2.1
BRICKWORK SUNDRIES
F2.1.1
Splayed mortar fillet one course high in cavity
530
F2.1.2
Closing cavity of hollow wall vertically with brickwork half
brick
wide
200
Closing cavity of hollow wall horizontally with brickwork half
brick wide
245
Expansion joints with "Sondor Jointex" between vertical
brickwork surface:
45
F2.1.3
F2.1.4
F2.2
Prestressed fabricated lintels:
F2.2.1
110 x 70 mm Lintels in lengths exceeding 3 m
16
F2.2.2
110 x 170 mm Lintels in lengths not exceeding 3 m
275
F2.3
Brickwork reinforcement:
F2.3.1
75 mm Wide reinforcement built in horizontally
12 550
F2.3.2
150 mm Wide reinforcement built in horizontally
1 240
F2.4
Galvanised hoop iron cramps, ties, etc:
F2.4.1
30 x 1.6 mm Wall tie 500 mm long with one end built into
brickwork and the other shot fired to concrete support
No
30
30 x 1.6 mm Roof tie 750 mm long with one end fixed to
timber and other end built into brickwork
No
120
No
20
F2.4.2
F2.5
Air bricks etc:
F2.5.1
230 x 160 Clay vermin proof air bricks
Carried forward /
TENDER NO. 09/2013
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
m2
875
m2
265
Brought forward /
F3
FACE BRICKWORK
"Corobrick Firelight Travertine" face bricks pointed with
recessed horizontal and vertical joints:
F3.1
Extra over brickwork for face brickwork
F4
DAMPROOFING OF WALLS AND FLOORS
F4.1
One layer 375 micron "Consol plastics brickgrip DPC
embossed damp proof course in walls
F5
JOINT SEALANTS ETC
Clear Neutral silicone sealant:
F5.1
F6
In joint sealing and pointing all round external window and
door frames
365
ROOF COVERINGS ETC
PROFILED METAL SHEETING AND ACCESSORIES
0.47 mm "Safintra Klip-Lok" profiled galvanised sheet
steel with "Dune" finish on one side and a coat of off
white backer to the reverse; in single lengths fixed to
timber purlins; including all trims, flashings, closers and
the like with "Dune" finish on one side; all in accordance
with the manufacturers specification and instruction:
F6.1
Roof covering with pitch not exceeding 25 degrees
F6.2
EO for fixing in a vertical position; including all framework
F7
ROOF INSULATION
F7.1
"Alucushion" heavy grade bubblefoil insulation laid taut over
purlins and fixed concurrent with roof covering including
galvanised steel straining wires
F7.2
CARPENTRY AND JOINERY
SUPPLEMENTARY PREAMBLES
Fixing
Items described and "nailed" shall be deemed to be fixed
with hardened steel nails or shot pins to brickwork or
concrete
Sizes
The Contractor shall make allowance in his prices for minor
variances in stated finished sizes of timber doors, door
members, door frames, architraves, etc., which are to match
existing
Wrought timber
The specified sizes of wrought timbers are the nett finished
sizes as required and the Contractor is to make such
allowance for wrought faces as he deems necessary.
Carried forward /
m2
760
20
m2
780
m
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
Brought forward /
Prices:
Prices for all joinery work are to include for general framing,
housing and notching, arris rounded angles, gluing, blocking,
planting on, screwing, adhesives, dowels, pellets, cross
tounges, screws, hangers and nails and setting up complete
and also for all square cutting and waste. Tops shall be
secured with metal or hardwood buttons.
ROOFS, ETC
Sawn softwood:
F7.2.1
38 x 114 mm Wall plate
110
F7.2.2
50 x 75 mm Battens
805
F7.2.3
50 x 76 mm Cross bracing
155
F7.2.4
38 x 50 mm Splayed eaves beam
110
305
Wrought softwood:
F7.2.5
Rafters; including treatment to ends and dpc sock all as specifi
F8
ROOF TRUSSES
The pre-fabricated timber roof trusses shall be designed by a
registered professional engineer and shall be in accordance
with SABS 0160 and 0163
Plate nailed timber roof truss construction:
The following is applicable in respect of pre-fabricated timber
roof trusses:
Trusses are at a maximum of 1 200 mm centres
Ceilings are 6,5 mm gypsum board with plastered joints on 38
x 50 mm brandering at 400 mm centres in on direction
The roof truss prices must include for all temporary bracing as
required to ensure a stable construction
The dimensions in the descriptions of the trusses are
nominal and actual measurements are to be obtained from
the representative/agent and/or the site before design or
fabrication commences
Prices must include for manufacturing, transport, storage,
hoisting and complete fixing in position including all necessary
temporary timber stiffeners, steel supports, truss hangers, etc.
as well as cutting to accurate lengths at eaves, ridges, hips,
valleys, notching, etc (roof bracing and roof truss anchors
elsewhere), all executed in accordance with manufacturer's
installation specification
The span of the roof trusses are measured between external
edges of the wall plates
The roof overhang of the trusses are measured from the
external edge of the wall plate to the back of the fascias
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
No
25
Hoist and fix into position mono pitched pre-fabricated roof
trusses spanning approximately 8 000 mm with a height of 1
300mm; as per drawings and specification; including all
fixings; bracing; hoop iron; hurricane clips; and the like
No
Hoist and fix into position mono pitched pre-fabricated roof
trusses spanning approximately 3 800 mm with a height of 1
200mm; as per drawings and specification; including all
fixings; bracing; hoop iron; hurricane clips; and the like
No
25
m2
65
135
220
220
No
No
No
No
Brought forward /
Wrought softwood pre-fabricated roof trusses as
described:
F8.1
F8.2
F8.3
Hoist and fix into position double pitched pre-fabricated roof
trusses spanning approximately 13 000 mm with a height of
2 700mm; as per drawings and specification; including all
fixings; bracing; hoop iron; hurricane clips; and the like
EAVES, VERGES, ETC.
Everite Nutec fibre cement:
Eaves soffit covering ne 600 mm wide of 4 mm thick sheets
fixed to existing brandering along edges and at 450 mm
centres across sheets; including all quadrants, half rounds
and the like
F8.3.1
F8.4
12 x 300 mm Fascias and barge boards including galvanised
steel H-profile jointing strips and three times countersunk
drilled at not exceeding 1 050 mm centres for and screwed to
fascia battens or rafters with brass screws
SKIRTINGS
Wrought meranti:
F8.4.1
19 x 69 mm Skirting plugged to
F8.4.2
brickwork 19 mm Quadrant fixed to
F9
skirting DOORS, ETC.
F9.1
"Swartland" 813 x 2032 x 40 mm Semi-solid SA Pine core
flush panel door with matching edging strips and standard
3.2 mm hardboard covering on both sides including all
ironmongery, furniture and finish; as per the schedule (D02)
F9.1.1
Ditto; but 813 x 1900 x 40 mm (D04)
F9.1.2
"Swartland" 900 x 2032 x 40 mm Solid SA Pine core flush
panel door with matching edging strips and standard 3.2 mm
hardboard covering on both sides including all ironmongery,
furniture and finish; as per the schedule (D03)
F9.1.3
"Swartland" Double door formed of two 807 x 2032 x 44 mm
Meranti FLBB door (SD20/1612) with 76 x 32 mm splayed
weatherboard including all ironmongery, glazing, furniture and
finish; as per the schedules (D05)
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
No
No
m2
520
m2
120
Brought forward /
F9.1.4
F9.2
F9.2.1
F10
"Swartland" Double door formed of two 807 x 2032 x 44 mm
Meranti FLBB door with 44 x 108 mm top rail and styles, 22 x
108 mm braces twice screwed to boarding with countersunk
brass screws, 22 x 222 mm bottom rail and 22 x 70 mm T&G
V-jointed boarding including all ironmongery, furniture and
finish; as per the schedules (D01)
FRAMES, ETC
"Swartland" wrought meranti frames formed of 100 x 69 mm
frame with sill for door 1613 x 2032 mm high (D01 & D05)
CEILINGS AND PARTITIONS
NAILED UP CEILINGS
F10.1
40 mm Thick Isoboard high density polystyrene closed cell
insulation board with groove finish including 38 x 50 mm
sawn softwood brandering at 700 mm centres in one
direction fixed to underside of trusses with adhesive at 200
mm centres; edge fixed with concealed ceiling clips screwed
to brandering (ref 5.2)
Gypsum plasterboard with 63 mm wide strips of mesh
scrim nailed over joints and the whole finished with
gypsum skim plaster trowelled to a smooth polished
surface to the thickness recommended by the
manufacturer:
F10.2
F10.3
6,4 mm Ceilings including 38 x 50 mm sawn softwood
brandering at 400 mm centres in one direction nailed to
underside of timber roof rafters
Extra over ceiling for 600 x 600 mm trap door of 50 x 50 mm
wrought softwood rebated framing with one 38 x 38 mm
sawn softwood cross brander covered with ceiling board and
fitted flush in opening with 8 x 40 mm wrought meranti flat
strips fixed to ceiling timber all round
F10.4
Gypsum plasterboard cornices:
F10.4.1
70 mm Coved cornices (ref 4.1)
F10.4.2
22 x 44 mm COL timbers shadow line cornice fixed to wall (ref
4.2)
F11
FLOOR COVERINGS, WALL LININGS, ETC
F11.1
SUPPLEMENTARY PREAMBLES
All materials shall be in colours to be selected by the
representative or agent and, where applicable, laid to
approved patterns.
Carried forward /
No
160
150
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
m2
490
Brought forward /
MARMOLEUM FLOOR COVERING
2.5 X 2 mm wide Floorworx Forbo Marmoleum Fresco
Topshield supplied and installed in accordance with the
specification and by approved specialists:
F11.1.1
On floors in patterns
F11.1.2
EO for 2 tint
F11.1.3
EO for stairs
F11.1.4
F11.2
EO for Floorworx extruda MSN 120 stair nosings
IRONMONGERY
m2
100
3
m2
12
Note - All door ironmongery not specifically listed here is
deemed to be included in the door description
LETTERS, NAMEPLATES, ETC
F11.2.1
F11.2.2
150 x 150mm AL 5022 -E01 plate with electrical symbol
No
75 x 150mm AL 5022 -E10/E11 AS male or female symbol
No
F11.2.3
F11.2.4
F11.2.5
F11.2.6
38mm High plastic letter or numeral
No
No
1
10
No
10mm x 100mm High thick perspex plate with 8 engraved and
painted letters or numerals
F12
BATHROOM FITTINGS
F12.1
F12.2
W & B Hardware theft proof toilet roll holder code 2798
"Franke" stratos paper towel dispenser code STRX600
F12.3
"Franke" stratos soap dispenser code STRX618
F12.4
150 x 150mm AL 5022 -E02 plate with tea cup symbol
150 x 150mm AL 5022 -E14 with paraplegic symbol
"Franke" waste bin code STRX605
5
No
8
No
No
No
8
8
4
No
F12.5
F12.6
F12.7
"Charman Industries" code SR1 satin polished stainless steel
grabrail plugged
"Charman Industries" code DL3 stainless steel grabrail
plugged
No
No
450 x 600 x 1.6 mm Reflective polished stainless steel mirrors
8
No
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
Frame for door size 813 x 2 032 mm high in 270 mm cavity
wall (D02&3)
No
10
Frame for door size 813 x 1 900 mm high in 110 mm wall
(D04)
No
Brought forward /
F13
METALWORK
GALVANISED PRESSED STEEL DOOR FRAME
1.6 mm Double rebated frames; including all hinges,
striking plate, rubber buffers, fixing lugs and the like; all
in accordance with the door schedule
F13.1
F13.2
F14
POWDER COATED ALUMINIUM WINDOWS
F14.1
3 300 x 2 125 mm NUKLIP window frame coupled with
approved butterfly gasket, wedge, packing piece, mullions as per manufacturers specifications; complete with all
ironmongery and glazing; all in accordance and as described
in the window schedule (Type W1)
No
F14.2
Ditto; but 2 500 x 390 mm (Type W2)
No
F14.3
Ditto; but 2 700 x 2 125 mm (Type W5)
No
F14.4
Ditto; but 300 x 2 125 mm (Type W7)
No
F14.5
1 230 x 1 060 mm TECHNAL window frame coupled with
approved butterfly gasket, mullions, wedge, packing piece as per manufacturers specifications; complete with all
ironmongery and glazing;all in accordance and as described
in the window schedule (Type W8)
No
590 x 590 mm BETCRETE polycrete window frame
complete with aluminium opening casement inserts coupled
with approved butterfly gasket, wedge, woolpile and finseal,
sill - as per manufactures specifications; complete with all
ironmongery and glazing; all in accordance and as described
in the window schedule (Type W3)
No
11
F14.7
Ditto; but 1 790 x 1 190 mm (Type W11)
No
F14.8
Ditto; but 1 790 x 590 mm (Type W6)
No
F14.9
800 x 800 x 300 mm WINBLOK concrete surround window
frame complete with aluminium opening casement inserts
coupled with approved butterfly gasket, wedge, woolpile and
finseal - as per manufactures specifications (code:
WB66/260) complete with all ironmongery and glazing; all in
accordance and as described in the window schedule (Type
W4)
No
38
F14.10
Ditto; but 400 x 400 x 300 mm (Type W9)
No
10
F14.11
Ditto; with fixed aluminium louver (Type W10)
No
F15
ROLLER SHUTTERS, ETC
F15.1
Allow the PC amount of R5 000 for a high security screen
door
Item
Allow the PC amount of R4 500 for kitchen hatch
Item
F14.6
F15.2
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
m2
775
Brought forward /
F16
PLASTERING
INTERNAL PLASTER
Cement plaster on brickwork:
F16.1
On walls including narrow widths
EXTERNAL PLASTER
Cement plaster on brickwork:
F16.2
On walls including narrow widths
m2
290
F16.2
Splayed plaster; approximately 140 mm wide
50
F17
TILING
F17.1
FLOOR TILING
F17.1.1
300 x 300 x 5 mm First grade non-slip porcelain tiles (PC
amount R200/m2) fixed with tile adhesive; all as per
specification (ref 1.1)
F17.1.2
EO for 150 x 300 mm skirting (ref 2.2)
F17.2
WALL TILING
F17.2.1
300 x 300 x 5 mm First grade non-slip porcelain tiles (PC
amount R200/m2) fixed with tile adhesive; all as per
specification (ref 3.2 note)
F17.2.2
m2
m
m2
200 x 200 x 5 mm First grade white glazed ceramic tiles fixed
with tile adhesive; all as per specification (ref 3.2 note)
m2
F18
PAINTWORK
F18.1
ON INTERNAL PLASTERED SURFACES
F18.1.1
One coat Plascon plaster primer and two coats Plascon
superior low sheen paint (ref 3.1)
F18.1.2
One coat Plascon plaster primer and two coats Plascon
kitchen and bathroom paint (ref 3.2)
F18.2
ON EXTERNAL PLASTERED SURFACES
F18.2.1
One coat Plascon plaster primer and two coats Plascon
superior paint
F18.3
ON FIBRE CEMENT
50
85
17
15
775
m2
261
m2
235
m2
One coat Plascon plaster primer and two coats Plascon
superior low sheen paint (ref 3.1)
F18.3.1
On eaves soffits, etc
F18.3.2
On fascias and bargeboards
F18.4
ON METAL
F18.4.1
One coat SIGMA cover primer and 2 coats SIGMADUR
0
m2
m2
m2
Carried forward /
12
34
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
220
m2
50
145
m2
65
Brought forward /
F18.5
ON WOOD
Three coats Plascon woodcare interior waterbased varnish
F18.5.1
On skirtings (ref 2.1)
Three coats Plascon woodcare exterior waterbased varnish
F18.5.2
On doors and frames
One coat Plascon professional wood primer and two coats
Plascon professional super matt paint
F18.5.3
On cornices (ref 4.2)
One coat Plascon professional wood primer and two coats
Plascon Velvaglo paint
F18.5.1
On doors
F18.6
ON PLASTERBOARD
One coat Plascon plaster primer and two coats Plascon
Professional all purpose matt paint
F18.6.1
On ceilings (ref 5.1)
F18.6.2
On cornices (ref 4.1)
F18.7
ON POLYSTYRENE
m2
m
120
160
One coat Plascon all purpose thinned and two coats Plascon
Professional all purpose matt paint
F18.7.1
On ceilings (ref 5.2)
F19
PLUMBING AND DRAINAGE (PROVISIONAL)
RAINWATER DISPOSAL
m2
520
Alugutter charcoal grey
F19.1
150 x 150 mm Eaves gutters
F19.2
Extra over 150 x 150 mm eaves gutters for stopped ends
F19.3
Extra over for outlet for 100 x 100 mm downpipe
F19.4
100 x 100mm Rainwater pipes
F19.5
Extra over 110 x 110mm rainwater pipe for bend
F19.6
Extra over 110 x 110mm rainwater pipe for shoe
F19.7
Extra over 50 x 75 mm rainwater pipe for eaves or plinth offset
900 mm projection
m
No
Carried forward /
No
m
No
No
No
135
10
16
80
16
16
16
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
12
38
Brought forward /
F20
All the following items will be allocated to work group 146
Drainage
F20.1
SOIL DRAINAGE
uPVC pipes:
F20.1.1
110 mm Pipes vertically or ramped to cleaning eyes etc in and
including trenches not exceeding 1 m deep
F20.1.2
110 mm Pipes laid in and including trenches not exceeding 1
m deep including all excavations in earth, bedding cradle and
blanket fill of selected granular material, main fill compacting
in layers not exceeding 150 mm thick, adjust moisture
content to optimum and compact to a density of 90% Nod
AASHTO in drain trenches including carting off surplus
displaced material
F20.1.3
F20.2
160 mm Pipes laid in and including trenches not exceeding 1
m deep including all excavations in earth, bedding cradle and
blanket fill of selected granular material, main fill compacting
in layers not exceeding 150 mm thick, adjust moisture
content to optimum and compact to a density of 90% Nod
AASHTO in drain trenches including carting off surplus
displaced material
F20.2.1
Extra over uPVC pipe for fittings:
No
F20.2.2
110 mm Bend
No
No
160 mm Bend
F20.2.3
F20.2.4
110 mm Access bend
No
F20.2.5
160 mm Access bend
No
F20.2.6
110 mm Junction
No
F20.2.7
160 mm Junction
No
F20.2.8
110 mm Access junction
No
F20.3
160 mm Access junction
F20.3.1
Cast Iron:
No
F20.3.2
110 mm Rodding eye
No
F20.4
160 mm Rodding eye
F20.4.1
Sundries:
m3
F21
Unreinforced concrete (15MPa) bedding under pipes
F21.1
Manholes, gulley traps, etc:
No
F21.2
110 mm uPVC Gulley trap and hopper with grid not exceeding
1000 mm deep all set and encased in (20MPa) mass concrete
to form kerb, finished smooth with plaster
No
Stubstack complete with vent pipe
F22
Testing:
Testing of soil drainage system
Carried forward /
Item
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
550 x 400 mm "Springbok" code 7031 white glazed vitreous
china washhand basin with one taphole fixed with and
including semi concealed brackets
No
510 x 400 mm "Sola 510 Medical" code 703700 white
glazed vitreous china washhand basin with one taphole
fixed with and including semi concealed brackets
No
"Parktown" low level white glazed vitreous china floor
mounted WC suite comprising code 431600 pan with heavy
duty white plastic double flap toilet seat and 9 litre code
7109DP Hibiscus duct cistern
No
"Orchid" low level white glazed vitreous china wall mounted
paraplegic WC suite comprising code 439016 pan fixed on
and including floor bracket with Jazz thermoset seat code
8531Z0 and Gerbit Kombifix wall hung cistern with Gerbit
Delta15 flush actuator and the like, including fixing in
position
No
No
No
No
No
No
10
No
No
No
22
No
No
Brought forward /
All the following items will be allocated to work group 148
- Plumbing
F23
SANITARY FITTINGS
F23.1
"Vaal":
F23.2
F23.3
F23.4
F23.5
F24
"Flatback" code 705326 white glazed porcelain top inlet wall
urinal with 38 mm code 8787z0 chrome plated domical
grating, chrome plated code 8543Z0 top inlet spreader and
fixed with two code 8127Z0 hanger brackets with flushmaster
code FJ6000
Stainless Steel:
Stainless steel shall be grade 304 (18/10)
F24.1
F25
F25.1
F25.2
F26
F26.1
F26.2
"Frankie Quinline" double centre bowl drop in sink, size 1
235 x 435 mm wide fixed in position on joinery fitting
WASTE UNIONS, ETC.
32 mm "Cobra" code 301 CP or equal approved basin waste
union
32 mm "Cobra" code 316-40 CP sink waste
TRAPS, ETC.
uPVC:
40 mm Deep seal "P" or "S" trap
"Geberit" in wall trap code 151.110.11.1
Brass:
F27
40 mm "Cobra" code 345/40 CP or equal approved bottle trap
F28
F28.1
F28.1.1
F28.1.2
F28.1.3
TAPS, VALVES, ETC.
Cobra or equal approved:
15 mm Brass hose bib tap with hose union
15 mm "Melia" code ME-228-15 undertile stopcock
15 mm "Melia" Code ME-214-15 pillar tap
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
Brought forward /
F28.1.4
15 mm Brass external tap
No
F28.1.5
15 mm "Medical" Code 503-21B medical raised nose elbow
action pillar tap
No
15 mm "Melia" code ME-266/041/10 CP sink mixer tap with
overarm swivel outlet code
No
F28.1.7
15 mm Urinal metering valve code KM6-000
No
F28.1.8
28 mm Brass gate valve
No
F28.1.9
22 mm Brass non-return valves
No
F28.1.10
28 mm Brass vacuum breaker
No
F28.1.11
22 mm Brass expansion release valve
No
F28.1.12
22 mm Combination brass temperature and pressure
regulating safety valve
No
F28.1.13
Cobra Masterbox I valve box
No
F29
SANITARY PLUMBING
F29.1
uPVC pipes:
F29.1.1
40 mm Pipes
F29.1.2
40 mm Pipes chased
60
F29.1.3
50 mm Pipes
F29.1.4
50 mm Pipes chased
F29.1.5
110 mm Pipes
15
F29.2
Extra over uPVC pipes for fittings:
F29.2.1
110 mm Pan connector
No
F29.2.2
40 mm Bend
No
10
F29.2.3
50 mm Bend
No
F29.2.4
110 mm Bend
No
16
F29.2.5
40 mm Junction
No
11
F29.2.6
50 mm Junction
No
F29.2.7
110 mm Junction
No
F29.2.8
110 x 40 mm Reducing junction
No
F29.2.9
40 mm Access bend
No
10
F29.2.10
50 mm Access bend
No
F29.2.11
110 mm Access bend
No
F29.2.12
40 mm Access junction
No
10
F29.2.13
50 mm Access junction
No
F29.2.14
110 mm Access junction
No
F28.1.6
Carried forward /
RATE
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
RATE
Brought forward /
F29.2.15
40 mm Two-way vent valve
No
F29.2.16
110 mm Two-way vent valve
No
F29.3
Testing:
F29.3.1
Testing of waste pipe system
Sum
F30
WATER SUPPLIES
F30.1
Below Ground:
50
No
15
No
Class 10 hdpe piping
F30.1.1
32 mm Water piping laid in ground or ground filling including
excavating with not less than 900 mm cover including bedding
cradle and blanket fill of selected granular material, main fill
compacting in layers not exceeding 150 mm thick, adjust
moisture content to optimum and compact to density of 90%
Mod AASHTO in trenches including carting off surplus
displaced material
Extra on piping for the following Class 10 fittings:
F30.1.2
32 mm Fittings
Sundries:
F30.1.3
F30.2
300 x 200 x 200 mm High precast concrete stopcock box
including precast concrete lid, all excavations, etc
Above Ground:
Class 0 copper pipes:
F30.2.1
15 mm Pipes chased
20
F30.2.2
22 mm Pipes chased
65
F30.2.3
28 mm Pipes chased
F30.2.4
35 mm Pipes chased
10
F30.2.5
42 mm Pipes chased
12
F30.3
Extra over class 0 copper pipes for capillary fittings:
F30.3.1
15 mm Fittings
No
20
F30.3.2
22 mm Fittings
No
40
F30.3.3
28 mm Fittings
No
F30.3.4
35 mm Fittings
No
F30.3.5
42 mm Fittings
No
F30.4
Polypropylene pipes with thermoplastic coupling:
F30.4.1
15 mm Pipes fixed to walls
11
F30.5
Extra over polypropylene pipes for thermostatic fittings:
F30.5.1
15 mm Fittings
No
Carried forward /
AMOUNT
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
RATE
AMOUNT
Brought forward /
F30.6
Testing:
F30.6.1
Testing water pipe system
F31
ELECTRIC WATER HEATERS
F31.1
100 Litre "Kwikot" 600 Kpa electric combination water heater
(EF100-2D) complete with pressure reducing valve, shut-off
valve, vacuum breakers and plastic overflow tray with 50 mm
outlet pipe to eaves all to comply with SANS 151; horizontal
mounted in ceiling space
Item
No
F32
FIRE APPLIANCES, ETC.
F32.1
Hose reel complete with 30 m rubber hose, chromium plated
stopcock, shut-off nozzle and wall bracket
No
4,5 kg Dry chemical fire extinguisher including 150 x 700 x
19 mm thick wrought hardwood backing plate with
chamfered edges fixed to wall
No
F32.2
F33
SUB CONTRACT AMOUNTS AND BUDGETARY
ALLOWANCES
F33.1
JOINERY FITTINGS
F33.1.1
Subcontract amount sum of R85,000.00 for joinery fittings
F33.1.2
Profit (
F33.1.3
General attendance
F33.1.4
Special attendance if required
F33.2
KITCHEN APPLIANCES
F33.2.1
Subcontract amount sum of R50,000.00 for kitchen
appliances
Provisional Sum
85 000.00
Provisional Sum
50 000.00
%)
F33.2.2
Contractor's overheads, charges and profit on Item F33.2.1
(State % and extend as an amount)
F33.3
BLINDS, CURTAINS
F33.3.1
Subcontract amount sum of R30 000.00 for blinds
F33.3.2
Profit (
F33.3.3
General attendance
F33.3.4
Special attendance if required
F33.4
RAINWATER TANKS
F33.4.1
Subcontract amount sum of R35,000.00 for water harvesting
tanks (4Nr)
R 50 000
Provisional Sum
30 000.00
Provisional Sum
35 000.00
%)
F33.4.2
Profit (
F33.4.3
General attendance
F33.4.4
Special attendance if required
%)
Carried forward /
ITEM No.
PAY
REF
DESCRIPTION
UNIT
QTY
RATE
AMOUNT
Brought forward /
F33.5
GASWORKS
F33.5.1
Subcontract amount sum of R30,000.00 for gas cylinder and
installation thereof complete with lockable gas cage
F33.5.2
Profit (
%)
F33.5.3
General attendance
F33.5.4
Special attendance if required
TOTAL SECTION F:
Carried to Summary
Provisional Sum
30 000.00
