Materials of Construction
Housings:Ductile iron
Cutters:Hardened alloy steel
Shafts:Hardened alloy steel
Mechanical Seals:Tungsten carbide faces
Specifications
2 (50 mm) hex shafts;
3 HP (2.2 kW) motor standard; 29:1 reducer
Cutter Size: 4-3/4 (120 mm) diameter cutters
Seal Max Working Pressure: 90 PSI (6 bar)
E - P.C.D.
F X G
OPTIONS AVAILABLE
In-Line
Open
Channel
7, 11, 13 Tooth Cutters
17 Tooth Wipes Ready Cutter
Custom Mounting Frames
FLOW RATE (m3/hr)
7.00
45
91
136
182
227
273
318
363
409
454
500
545
591
0.48
Explosion Proof Motors
Immersible Motors
Hydraulic Power Pack
Extended Motor Shafts
ANSI, JIS, JWA, BS & AS Flanges
DS
2%
DS
DS
4%
DS
6%
10
0.41
RAW
SEWAGE
5.00
0.34
4.00
30004T-1208
(200 mm)
3.00
2.00
W G
RA A
W
SE
0.21
0.14
30004T-1206
(150 mm)
1.00
0.00
0.28
30004T-2412
(300 mm)
30004T-2410
(250 mm)
0.07
30004T-1204
(100 mm)
200
PRESSURE DROP (bar)
Alternate Voltage & HP Motors
6.00
10
%
8% DS
6% D
4% D S
2% D S
DS S
PRESSURE DROP (psi)
Stainless Steel Feed Hopper
DS
Solids Scrapers
8%
MODEL 30004T
MODEL
30004T
SS & NEMA 7 Control enclosures
11 1/2
[292]
15 1/4
[387]
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
0.00
2600
FLOW RATE (gpm)
IN-LINE
Model
Flow Rate
- gpm
(m3/hr)
Pipeline
Size
- inches
(mm)
Pressure
Drop
- psi (bar)
30004T-1204
450 (102)
4 (100)
0.52 (0.04)
Standard Dimensions
- inches (mm)
Flange Dimensions
- inches (mm)
58-1/4 (1480)
28-1/4 (718)
28-1/4 (718)
9-3/8 (238)
7-1/2 (191)
3/4 (19)
Approximate
Net Weight
- lbs (kg)
562 (255)
30004T-1206
700 (159)
6 (150)
1.23 (0.08)
58-1/4 (1480)
28-1/4 (718)
28-1/4 (718)
10-3/8 (264)
9-1/2 (241)
7/8 (22)
559 (254)
30004T-1208
1100 (250)
8 (200)
3.00 (0.21)
58-1/4 (1480)
28-1/4 (718)
28-1/4 (718)
11-1/4 (238)
11-3/4 (286)
7/8 (22)
568 (258)
30004T-2410
1700 (386)
10 (250)
2.97 (0.20)
69-3/4 (1772)
39-3/4 (1010)
39-1/4 (1010)
12-5/16 (313)
14-1/4 (362)
1 (25)
12
789 (358)
30004T-2412
2450 (556)
12 (300)
5.80 (0.40)
69-3/4 (1772)
39-3/4 (1010)
39-1/4 (1010)
13-1/4 (337)
17 (431)
1 (25)
12
809 (367)
In-Line unit typically installed prior to suction side of pump. Consult factory for analysis of application.
Drive dimensions are a maximum based on a unit with a 3 HP (2.2 kW) drive.
MODEL
MODEL 30005
30005
FLOW RATE (m3/hr)
23
45
68
91
114
136
159
182
204
227
250
273
295
318
341
Hdown= 6"
22
30005-0024
HEAD DROP (inch)
20
14
457
Hdown= 12"
406
356
Hdown= 14"
Hdown= 2"
12
305
Hdown= 16"
30005-0012
10
254
Hdown= 18"
203
Hdown= 20"
30005-0008
152
Hdown= 22"
102
Hdown= 24"
508
Hdown= 10"
30005-0018
16
559
Hdown= 8"
Hdown= 4"
18
660
610
24
51
Hdown= 26"
0
100
200
300
400
500
HEAD DROP (mm)
26
600
700
800
900
1000
1100
1200
1300
1400
0
1500
FLOW RATE (gpm)
MODEL
MODEL 30005
30005
FLOW RATE (m3/hr)
7
[178]
3 7/8
[98]
55
11 3/4
[298]
114
227
341
454
568
681
908
1022
1136
1249
1363
Hdown= 12"
30005-0060
50
1270
Hdown= 20"
30005-0050
40
1143
Hdown= 24"
Hdown= 8"
35
1016
Hdown= 28"
30005-0040
889
Hdown= 32"
Hdown= 6"
30
1476
1397
Hdown= 16"
Hdown= 10"
45
HEAD DROP (inch)
795
762
Hdown= 36"
25
635
Hdown= 40"
30005-0032
20
508
Hdown= 44"
Hdown= 48"
15
381
Hdown= 52"
10
254
127
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
0
6500
FLOW RATE (gpm)
Standard Dimensions
- inches (mm)
Approximate
Net Weight
- lbs (kg)
OPEN CHANNEL
Model
Flow Rate
- gpm (m3/hr)
Head Drop
- inches (mm)
A
30005-0008
370 (84)
7 (178)
49-1/2 (1257)
8 (203)
19-1/2 (495)
370 (168)
30005-0012
620 (141)
11-1/2 (290)
53-5/8 (1362)
12 (305)
23-5/8 (600)
410 (186)
30005-0018
980 (223)
16 (405)
59-1/2 (1511)
18 (457)
29-1/2 (749)
465 (211)
30005-0024
1370 (311)
16 (405)
65-1/4 (1657)
24 (609)
35-1/4 (895)
520 (236)
30005-0032
2100 (477)
17-1/2 (445)
73 (1854)
32 (813)
43 (1092)
580 (263)
30005-0040
3020 (686)
19-1/2 (495)
81 (2057)
40 (1016)
51 (1295)
650 (295)
30005-0050
4310 (979)
23-1/2 (595)
90-7/8 (2308)
50 (1270)
60-7/8 (1546)
740 (336)
30005-0060
5620 (1277)
30 (760)
101-3/8 (2575)
60 (1524)
71-3/8 (1813)
845 (383)
* Flow based on optimum channel conditions. Consult factory for analysis of application.
Drive dimensions are a maximum based on a unit with a 182T motor frame. Extended drive shafts are available on request.
Costa Mesa, CA. USA | 800.331.2277 | jwce.com | [email protected]
2015 JWC Environmental. JWCEs Santa Ana and Costa Mesa California facilities are registered by UL to ISO9001:2008 #10001313 QM8. JWC International Congleton, UK is registered by QAS to ISO9001:2008
File #A13056. U.S. patents apply: 4,919,346; 5,060,872; 5,320,286; 5,333,801; 5,354,004; 5,478,020; 5,505,388; 5,593,100; 6,176,443; 6,332,984; 7,073,433; 7,080,650; 7,081,171; 7,086,405; 7,383,842;
7,771,589; RE37,550E; RE37,349E; RE40,422; RE39,948E. Additional patents pending and international patents also apply. All rights reserved. JWC Environmental is not liable for damages that may result from any
information provided in or omitted from this publication, under any circumstances. JWC Environmental reserves the right to make adjustments to this publication at any time, without notices or obligation. Please
check the JWC Environmental website (www.jwce.com) for the most up-to-date information or speak to your local rep.
HEAD DROP (mm)
8 1/2
[216]
