Hand Yokes
A Division of Illinois Tool Works Inc.
MAGNAFLUX GmbH Bahnhofstr. 94-98 D-73457 Essingen
Tel. + 49 (0)7365 81-0 Fax + 49 (0)7365 81-449
www.tiede.de
[email protected]Mobile Crack Detection Units
The portable MAGNAFLUX hand yokes of brand TIEDE serve as testing units especially to
check ferromagnetic parts when burn marks or annealing must not occur. When checking for
wear, at revisions as well as for uncomplicated test tasks to be completed quickly the hand
yokes are the perfect testing units.
A Division of Illinois Tool Works Inc.
TWM 220 N
TWM 230 A
The TWM 220 N hand yoke is an AC current instrument that
can be directly connected to a 230 V AC supply. In conjunction
with adjustable pole pieces it is ideally suited for testing uneven
surfaces, tube bends,angle pieces etc.
The TWM 230 A hand yoke is of similar construction to the
TWM-N type, however, the switch on this model can be exchanged when it becomes worn, or faulty. We have also introduced a special switching circuit so that the yoke is switched on
when the AC current is passing through zero, thereby greatly
extending the life of the switch and the yoke.
Technical data
Ref. No.
Electrical supply
Frequency
Pole cross section
Weight - hand yoke
Pull-off strength
Technical data
Ref. No.
Electrical supply
Frequency
Pole cross section
Weight - hand yoke
Pull-off strength
071301
230 V
50 Hz
28 x 22 mm
3.2 kg
18 kg AC
KWM 42
071310
230 V
50 Hz
28 x 22 mm
3.2 kg
18 kg AC
TWM 42 A/N
The cross yoke KWM 42 consists of two AC yokes dis-placed
by 90 so that both longitudinal and transverse cracks can be
detected in one single operation. Two castors on each
magnetic pole maintain a constant air gap
and enable the yoke to be moved easily over the test
surface.The KWM 42 is powered by a 3-phase supply through
a separate transformer.
The AC hand yoke TWM 42 A/N operates at 42 V supplied
from a separate transformer which is connected to a 230 V AC
supply. This satisfies the VDE safety regulations so that the TWM
42 A/N can be used for testing invessels, tubes and closed
containers.
Additionally the TWM/A is equipped with an exchangeable
switch
Technical data
Ref. No.
Electrical supply
Frequency
Pole cross section
Weight - cross yoke
Pull-off strength
074001
42 V
50 Hz
27 x 27 mm
10.8 kg
17 kg AC
Separate transformer
Ref. No. (60 % ED)
Weight transformer
3 x 400 / 42 V / 50 Hz
074020
23.6 kg
Technical data
Ref. No.
Ref. No.
Electrical supply
Frequency
Pole cross section
Weight - cross yoke
Pull-off strength
072301
072310
42 V
50 Hz
28 x 22 mm
3.5 kg
17 kg AC
Separate transformer VDE 0551
Ref. No.
Weight transformer
230 / 42 V
077110
7 kg
A Division of Illinois Tool Works Inc.
JWM 230
NEW
The hand magnet JWM 230 is small in size, light
in weight, and therefore handy to use. Its magnetization
output is adequate to satisfy the majority of test requirments.
Articulated pole pieces with twinknuckle adjustments may be
mounted on the yoke to extend the range of test applications
and to ensure the optimum development of the magnetic field
within the test piece.
The hand magnet JWM 230 is a 230 V/AC as well as a 12 V/DC
one. The DC connection needs a 12 V/DC transformer.
Protective poles can be mounted to both poles on the
hand magnet (refer to the accessories description in section
right side).
Note:
Caused by the new design, the JWM 230 can only be
operated with one pole of the attachments. It is NOT
possible to operate the yoke without any pole
attachment.
MAG-1
The MAG-1 magnet is ideal for the effective magnetization of
components for crack detection, particularly where the use of
electromagnetic yokes is impractical or prohibited for safety
reasons. The hinged arms and rotating angled pole pieces
facilitate the local inspection of a diverse range of components
such as critical welds and automotive components.
Technical data
Ref. No.
Magnet material
Relevant specification
Poles
Weight - hand yoke
Pull-off strength
076051
Neodymium Iron Boron
BS 6072
35 mm
3.02 kg
> 18 kg
*)Pole Pieces
*) one of these items is a MUST!
Technical data
Ref. No.
Electrical supply
Frequency
Pole cross section
Weight - hand yoke
Pull-off strength
075002
230 VAC / 12 VDC
50 Hz
23 x 27 mm
2.9 kg
5-16 kg AC/20-30 kg DC
Suitable accessories for the JWM 230:
Transformer for 12V-DC-operation
Ref. No.
077120
Adapter cabel
Ref. No.
077501
Pole Pieces
Ref. No.
*)
1)
2)
3)
4)
Pole Pieces for the hand yokes JWM 230, TWM 42 A/N,
TWM 220 and TWM 230 A.
1)
Articulated legs for fillet seam inspection
Ref. No. 077004
2)
45 poles for fillet seam inspection
Ref. No. 077003
3)
Articulated legs for inspection of angle pieces, tube
bends and other uneven areas
Ref. No. 077001
4)
Protective poles to safeguard the pole areas
Ref. No. 077002
Hand yokes
A Division of Illinois Tool Works Inc.
Carrying case
For hand yokes, UV lights and accessories.
Carrying case made from wear-resistant plastic material to hold the following equipment:
1 AC hand yoke
TWM 220 N, TWM 230 A, BWM 220/12, JWM 220 or TWM 42 A/N (without transformer)
1 portable UV light
with standard transformer (no isolating transformer)
1 UV spare bulb
1 UV spare filter glass
1 set of pole pieces each
Ref. No. 136001
(case without contents)
Ref. No. 136005
(case without contents) same as Ref. No. 136001 but suitable for
transportation/storage of Labino portable UV-lights instead of portable UV-lights.
Dimensions
Unit type
JWM 230
TWM 220 N
TWM 42 A/N
TWM 230 A
MAG-1
Unit type
JWM 230
TWM 220 N
TWM 42 A/N
TWM 230 A
1)
A mm
167
168
168
168
200
D mm1)
285
285
285
285
B mm
270
268
268
268
200
C mm
117
158
158
158
177
E mm
159
202
202
202
F mm2)
207
250
250
250
2)
min. pole distance
Height in straight position
with adjustable poles: fix mounded at JWM 220, can be moundedt to all other TWM unit types (optional).
Unit type
JWM 230
TWM 220 N
TWM 42 A/N
TWM 230 A
1)
G mm1)
105
105
105
105
J mm2)
207
250
250
250
H mm
159
202
202
202
2)
Unit type
KWM 42
A mm
320
B mm
205
C mm
195
D mm
80
MAGNAFLUX GmbH Bahnhofstr. 94-98 D-73457 Essingen Tel. + 49 (0)7365 81-0 Fax + 49 (0)7365 81-449 www.tiede.de [email protected]
Copyright MAGNAFLUX GmbH * Stand 04/2012 * nderungen vorbehalten
min. pole distance
Height in straight position
with adjustable poles: fix mounded at JWM 220, can be moundedt to all other TWM unit types (optional).
