STEEL BELTS FOR
AUTOMOTIVE TESTING APPLICATIONS
Berndorf Band is the foremost producer
of steel belts for automotive testing
applications. The latest technologies in
conjunction with decades of experience
have enabled us to consolidate our position
as technology leader in this field.
Technology and experience
The manufacture of the first tire testing
belt, of high-strength stainless steel, in
the 1980s marked the start of a continuous
development. Berndorf Band was and is
also the number one in the production of
wide belts for flat-track test stands in wind
tunnels and heavily loaded wheel drive
belts.
Continuous Reliability
Berndorf Band GmbH
A-2560 Berndorf / Austria
Tel (+43)2672/800-0
Fax (+43)2672/84 176
[email protected]www.berndorf-band.at
Berndorf Belt Technology Inc.
Gilberts, Illinois 60136
Phone (847) 841-3300
24 hour service (800) 422-6277
[email protected]www.berndorf-usa.com
Speeds of up to nearly 483 mph and the
need for extremely accurate running properties place exceptionally high demands
on steel belts.
Special manufacturing methods coupled
with quality testing ensure that our
products will stand
the test in practical
applications.
This is why leading
tire and motor vehicle manufacturers put
their trust in our products. Steel belts from
Berndorf Band are even widespread in
Formula 1 racing, the king class of motor
sports.
Belt Types
Berndorf Band manufactures steel belts in
a variety of sizes. Steel belts for automotive
testing applications are available in lengths
of about 1.5 m upwards, 200 mm wide and
0.3 mm thick. Lengths of over 20 m, widths
of over 3 m and thicknesses of up to 1.0 mm
are commonplace today. Steel belts like those
required in Formula 1, for instance, are welded together longitudinally in order to achieve
widths of over 1,500 mm.
As far as surface quality is concerned, a slightly
rough, cold-rolled surface offers a sound basis
for automotive testing applications. However,
ground surfaces can also be provided, or any
other surface quality that may be required.
The geometrical characteristics of such belts
are critical in view of the extremely accurate
running properties required. Optimal flatness
and straightness are of critical importance
for precise running and maximum operating
safety.
Some applications even require special coatings on the belt surface. Berndorf Band has
years of experience in applying such coatings,
which can be put on to both new and used
belts.
Service & Maintenance
When it comes to service and maintenance,
Berndorf Band has adopted a comprehensive
approach in order to provide optimal support
for its customers even during operation.
The company has not only developed special repair methods and equipment, but also
seminars, training sessions and lectures designed to impart Berndorf Bands specialized knowledge of steel belts and practical
experience to the companys customers.
The spectrum of maintenance services ranges
from on-site inspections and repairs to general
overhauls at the factory in Berndorf, including
the replacement of worn-out coatings. Our ultimate objective is always, as deemed possible, to restore each belt to mint condition.
It is therefore quite possible for a belt to be
overhauled several times during its lifetime.
All this contributes to a long service life for the
belt, which is of direct benefit to the customer.
(c) IABG mbH - IABG Flachbahnreifenprfstand
Flat-Trac (R) III CT - Mnchen/Ottobrunn
Physical and mechanical properties. Typical values.
Type
CrNiCuTi 15 7
Similar material
DIN
AISI
Tensile strength
at 20 C=68 F
N/mm2
1550
0.2% yield offset strength
at 20 C=68 F
N/mm2
1500
Rockwell HRC
Vickers HV 10
47,5
480
Hardness
Elongation 50 mm
Welding factor
0,80
at 20 C=68 F
N/mm2
700
at 20 C=68 F
at 200 C=292 F
N/mm2
N/mm2
200.000
188.000
kg/dm3
7,74
20-100 C=68-212 F
20-200 C=68-392 F
20-300 C=68-572 F
10 m/mC
10-6m/mC
10-6m/mC
10,9
11,5
11,7
J/gC
0,50
Fatigue strength under
reversed bending stress*)
Modulus of elasticity
Density
Mean coefficient of
thermal expansion
Specific heat
-6
Thermal conductivity
at 20 C=68 F
W/mC
16
Specific electric resistance
at 20 C=68 F Ohm mm /m
0,80
C
F
350
660
Tensile strength at max. permissible
operating temperature
N/mm2
1250
0.2% yield offset strength at max.
permissible operating temperature
N/mm2
1180
Max. permissible operating
temperature
*) 50% of the test specimens withstand 2,000,000 load cycles.
If not otherwise specified, the values given apply at room temperature.
Subject to change due to technological progress. Errors and omissions excepted.
Tremendous importance is attached
to materials and their properties in
automotive testing applications.
High belt speeds, short belt lengths
and compact configurations with
small deflection drum diameters
mean a high level of tension coupled
with high dynamic loading. This is
why Berndorf Band exclusively uses
top-quality, high-end materials like
NICRO 52.6.
This precipitation hardened stainless
steel combines high strength with
the excellent toughness achieved
by means of special heat treatment.
We carry out this heat treatment
in house, allowing us to establish
extremely accurate parameters for
the above-mentioned materials
properties.
A 8/2014
NICRO
52.6
Material
Please refer to our General Terms and Conditions of Sale.
Technical data
