Technical Description
Rail Mounted Gantry Cranes
RMG
Technical Data
RMG Model Designation
S190 L (MT) / (RT)
Rotating machinery trolley (optional)
Machinery trolley
Lattice structure for main beam
Hoist motor size
Typical RMG Model Range*
A: Gantry span
B: Lifting Height
22 - 70 m
From 9.2 m for 1 over 2
Up to 26.9 for 1 over 8
C: Cantilever
0 - 20 m
D: Cantilever
0 - 20 m
E: Travel wheel guage
16.5 m - 18.2 m
F: Buffer to buffer
23.2 m - 25.5 m
1 m - 2 m dependant on wheel
G: Wheel spacing
loads
Wheels per corner
6 - wide leg
4 - narrow leg
SWL
40.6 - 50 t single | 50 - 65 t twin
*Other features and dimensions also available
Advantages of RMG for Yard Stacking
Suitable for both port and rail terminals.
Suitable for various yard space conditions.
Increased yard capacity with wider and higher stack
possibilities.
Reduction in emissions and noise.
Minimal maintenance.
Typical Design Parameters*
Classification according to F.E.M.
In service wind speed
Out of service wind speed
Ambient temperature range
U7-Q2-A7 (Single lift)
72 km/h (20 m/s)
151.2 km/h (42 m/s)
-45C to + 45C
Working Speeds**
Hoisting with no load
Hoisting with rated load
Trolley travel (with and without load)
Gantry travel without load
Slewing 190 (optional)
Rail Mounted Gantry Cranes (RMG)
56 m/min
28 m/min
70 m/min
130 m/min
1.2 RPM
Electric supply for energy efficiency and reduced running
costs.
Liebherr Anti-Sway System
(Eight Rope Reeving)
Advantages by Design
Minimal spreader positioning times.
Lower energy consumption.
No-sway in hoist, trolley and travel directions.
All electric spreader - Less maintenance.
Anti-skew.
Significant increase in productivity when compared with
alternative designs.
No additional ropes or devices necessary.
No head block - Reduced rope load and tare weight.
Motors and Speed Control System
Motors / Suppliers
All drives are sized for maximum torque and power
requirements, guaranteeing extended lifetime.
All major components are sourced from reputable european
manufacturers.
Speed Control System
The control system used has been specifically developed for
container cranes by Liebherr, which has resulted in a flexible,
robust construction with exceptional reliability.
The plug-in modular construction of the electronic
equipment is designed to maximise crane availability and
minimise the necessity for highly skilled electronic personnel.
Rail Mounted Gantry Cranes (RMG)3
Liebherr Rail Mounted Gantry Crane
Liebherr reeving system: Sway prevention, not sway
correction.
Regeneration during lowering of load and drive deceleration,
results in overall reduction in power consumption.
Electric (gantry align) steering.
Rigid robust structure - Optimum for automation. Optional
DGPS auto steering and container positioning.
Direct gearbox driven travel systems.
Separate drives for hoist, travel and trolley, with no need for
side shift on the spreader. Allows superior fine positioning
with simultaneous motion.
Worldwide Liebherr service network.
Extensive training (in-house and on-site).
Purpose built state-of-the-art design and production
facilities located in Ireland since 1958.
Highly skilled and experienced employees with expertise inhouse for after sales service.
Responsibility with Liebherr, eliminating interface and
compatibility problems (i.e. structural, mechanical and
electrical design, production, commissioning and service).
Options
Rotating machinery trolley.
Automation of RMG and container tracking.
Interface with TOS (terminal operating system).
Container positioning system.
Trim and skew spreader positioning.
Remote operation option.
Energy chain / festoon system.
Fault data between crane and office by RF link / Fibre optic
with optional link to the Liebherr factory.
Non-contact anti-collision system.
Diagnostic and Managment System
Description
Summary of Main System Features
Liebherr designed and built.
General Control Overview.
Windows OS with CoDeSys logic control system.
Crane ON status.
Status of switchgear and external electrical components.
Individual Drive ON screens (one for each drive).
Stores up to 20,000 faults.
Detailed drive data (motor current, voltage, speed).
User-friendly interface with easy to use colourful screens.
Wind speed and history.
Independence of crane logic system, therefore does not
interfere with crane control in the event of self failure.
Spreader status.
Includes trending and tables for production data and drive
data.
Fault stack.
Load statistics.
RMG06/2014Subject to change without notice.
Maintenance.
Liebherr Container Cranes Ltd.
Fossa, Killarney, Co. Kerry, Ireland
Tel.: +353 64 66 70 200
[email protected]facebook.com/liebherrmaritime
www.liebherr.com
