REXON
ERA DUO 3
turnstiles
Basic characteristic
Light-weight steel dimensional construction of high quality, trouble-free
and simple operation are the hallmarks of the REXON - ERA DUO 3
turnstile making it ideal for high security applications where the fully
automatic and unmanned identification of people with high throughput
capacity is required. REXON - ERA DUO 3 is an economical version
of a robust turnstile REXON - DEA DUO. Anti-corrosive treatment of all
components and high quality final finish of REXON - ERA DUO 3 turnstile
guarantee long-life and reliable operation not only for interior but also
during extreme conditions of outdoor installations. Functional design,
constructive and color variability make REXON - ERA DUO 3 turnstile to
be a unique part of entrance control system.
REXON - ERA DUO 3 turnstile is a bi-directional turnstile with electronic
access control, the 120 openings ensure comfortable, easy and safe
access for one person. Sophisticated control electronics enables easy
setting of its own operating mode and at the same time it provides the
communication with different types of identification and signaling.
Turnstile REXON-ERA DUO 3 is offered with the following
types of drive unit:
Motor drive unit MT (standard):
REXON-ERA DUO 3 turnstile motorized version provides high comfort along with reliable and maintenance-free running:
double-brake system for total security in combination with motor-drive unit
automatically adapts the rotation speed to the users
provides a high level of safety in the event the turnstile detects an obstruction it will stop the moving
silent and fluent running
Motor-driven unit is supplied in two variants.
1)
FAIL-LOCK: turnstile is blocked during the power failure
2)
FAIL-SAFE: turnstile is unblocked for free passage during the power
failure
2360
420
Mechanical unit
Mechanical unit one-way version:
enables setting one of directions permanently blocked and the
other unblocked for free passage
2520
blocking system prevents the turnstile reverse during passing
2100
This type of turnstile is applied to regulate and control the number of
passing people in one-direction and it is not controlled by any superior
devices.
Mechanical unit does not require the power supply.
T URNSTILE M ATERIALS A ND S URFACE T REATMENT :
Top panel:
240
steel sheet, thickness 3 mm, surface-finished by
powder coating (standard: RAL 9006 PE)
Cover of top panel: steel sheet, thickness 1.5 mm, surface finished by
powder coating (standard: RAL 9006 PE)
steel tube 40 mm, hot-dip galvanized
Internal barrier:
closed thin-walled profile and steel tube 40 mm,
hot-dip galvanized
Outer barrier:
steel profile, hot-dip galvanized
Other mechanical parts of turnstile are finished by galvanic zincing or
blackening.
1365
Rotor arms:
130
1490
steel tube 108 mm, hot-dip galvanized
770
820
770
COMINFO, a.s., Nabrezi 695, 760 01 Zlin, Czech Republic
tel.: +420 603 151 333; e-mail: cominfo@[Link]
[Link]
Rotor column:
turnstiles
REXON ERA DUO 3
Interface:
Turnstiles are controlled by microprocessor control units that is equipped
with high effective processor. Control electronics is equipped with
extensive subsystem that enables the connection of many input and
output devices, all of them are galvanically isolated.
device operating by status signals, serial bus RS 485, USB or
Ethernet (with external converter)
configurable two-state outputs about turnstile status
motor control by digital power bridges with overload protection and
current measurement
include generating log file with a list of all faults accompanied with
time/date mark
possibility of remote firmware upgrade
wide range of configuration and diagnostics parameters for remote
customization using T-CONF software
full remote control of turnstile network including passage counters
status shown on PC using T-MON program
possibility to connect the supplementary ultrasonic, laser or infra-red
sensors
enables back up accumulator connection directly in the turnstile
(supports charging, measuring and auto-switching for power supply
from accumulator in case of power failure)
ACCESSORIES
connectors for all input/output signals for fast and easy installation,
service and replacement
Additional electromagnetic brake to increase the turnstile resistivity
against illegal passage.
top-quality control electronics enables high operational reliability
Additional locking:
Columns and holders for accessories:
Operating of turnstile in case of power failure
Columns and holders for placing of identication readers or other accessories
(for example: LED information panel).
FAIL-SAFE unit: turnstile is automatically unblocked and it is possible to
Lighting:
pass through the turnstile in both directions.
FAIL-LOCK unit: it is possible to ensure 6 hours operating in case of
backup accumulator usage.
If input signal from access control system or button controller is received
it is possible to turn round the turnstile 120 and by that way enable the
passing to one person.
For each way of direction it is possible to define the different operating
modes:
1. free passage
2. controlled passage
3. permanently blocked
This setting can be set-up for any direction eventually for both directions
at the same time.
BASIC TECHNICAL PARAMETERS
Table of drive unit electric parameters
Type of drive unit
Anchoring frame:
Steely frame to x the turnstile for example through the interlocking pavement
Traffic-Light information panel:
Operating modes
Rated
supply
voltage
Lighting of turnstile interior
Power consumption in basic operation modes
Standby mode
break activated / break released
Transit
mode
animation of identication card alarming necessary identication of the passing person
information about the turnstile accessibility in set direction
information about transit permission based on evaluation by access control system
information about reading of invalid identication card
Touch control panel
animation of identication card alarming necessary identication of the passing
person
information about the turnstile accessibility in set direction
information about transit permission based on evalution by access control system
information about reading of invalid identication card
Back-up accumulator:
During a power failure the accumulator ensures the turnstile continuous operation
for a period of minimally 6 hours. It is possible to use two backup modes.
accumulator in external power supply unit (back up > 6 hours)
accumulator inside the turnstile (emergency back up about 30 minutes in case
of feed cables disconnection).
Counter:
included in program T-MON it is possible to connect the external counter
Identification systems:
Motorised FAIL-LOCK
12VDC
6W
25 W
50 W
In order to identify the passing people, it is possible to connect to these turnstiles
REXON-ERA DUO 3 any type of barcode, magnetic card, proximity chip card,
smart card, biometrical sensor.
Motorised FAIL-SAFE
12VDC
25 W
6W
30 W
Software accessories:
standard range of working temperatures: +10+50C
range of working temperatures (with heating module) 25 +50C
range of storage temperatures 0 +50C
maximum relative humidity 80% (non-aggressive environment)
MCBF: 3 000 000 cycles (number of cycles before error)
The number of passages, in dependence on type of control
electronics, operating mode and the way of identification of
passing people, rates between 30 to 60 persons per minute.
Increase of power supply on motor drive unit with automatic
heating module is 24 W. The power supply can be also
increased by using optional accessories..
COMMUNICATION CLIENT software that enables the connection of turnstile
network with PC. This program runs on the background (its activity is hidden) and
enables to any PC with valid authority to make setting and control the turnstile
network.
T-MON program that enables to control the turnstile system from any PC with valid
authorization in customers network. Remote control of the same turnstile is possible
from different PC at the same time. It is fully graphic application that can be used
even with touchscreen monitors.
T-CONF program that enables to change the turnstile conguration, conguration
backup, record new conguration, error report and vypustit z textu rmware upgrade.
It is localized to many world languages. It is possible remotely connect to any
turnstile through Internet after fulllment of all network qualications.
Specific variants:
stainless steel rotor with arms stainless steel design
RAL custom color
