The Silex Book

generated on November 18, 2015

The Silex Book

This work is licensed under the Attribution-Share Alike 3.0 Unported license (http://creativecommons.org/
licenses/by-sa/3.0/).
You are free to share (to copy, distribute and transmit the work), and to remix (to adapt the work) under the
following conditions:
Attribution: You must attribute the work in the manner specified by the author or licensor (but
not in any way that suggests that they endorse you or your use of the work).
Share Alike: If you alter, transform, or build upon this work, you may distribute the resulting work
only under the same, similar or a compatible license. For any reuse or distribution, you must make
clear to others the license terms of this work.
The information in this book is distributed on an as is basis, without warranty. Although every precaution
has been taken in the preparation of this work, neither the author(s) nor SensioLabs shall have any liability to
any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by
the information contained in this work.

Contents at a Glance
Introduction .......................................................................................................................................4
Usage .................................................................................................................................................6
Middlewares .....................................................................................................................................20
Organizing Controllers......................................................................................................................24
Services.............................................................................................................................................26
Providers ..........................................................................................................................................31
Testing .............................................................................................................................................35
Accepting a JSON Request Body .......................................................................................................39
Using PdoSessionStorage to store Sessions in the Database.................................................................41
Disabling CSRF Protection on a Form using the FormExtension.........................................................43
Using YAML to configure Validation .................................................................................................44
Making sub-Requests ........................................................................................................................45
Converting Errors to Exceptions........................................................................................................48
Using multiple Monolog Loggers.......................................................................................................49
Managing Assets in Templates...........................................................................................................51
Internals ...........................................................................................................................................53
Contributing.....................................................................................................................................55
DoctrineServiceProvider ....................................................................................................................57
MonologServiceProvider ...................................................................................................................60
SessionServiceProvider ......................................................................................................................63
SwiftmailerServiceProvider ................................................................................................................65
TranslationServiceProvider................................................................................................................68
TwigServiceProvider..........................................................................................................................72
UrlGeneratorServiceProvider .............................................................................................................75
ValidatorServiceProvider ...................................................................................................................77
FormServiceProvider .........................................................................................................................82
HttpCacheServiceProvider.................................................................................................................86
HttpFragmentServiceProvider............................................................................................................89
SecurityServiceProvider .....................................................................................................................91
RememberMeServiceProvider .......................................................................................................... 103
SerializerServiceProvider.................................................................................................................. 105
ServiceControllerServiceProvider ..................................................................................................... 107
Webserver Configuration ................................................................................................................ 110
Changelog ...................................................................................................................................... 114

PDF brought to you by

generated on November 18, 2015

Contents at a Glance | iii

Chapter 1

Introduction
Silex is a PHP microframework. It is built on the shoulders of Symfony1 and Pimple2 and also inspired by
Sinatra3.
Silex aims to be:
Concise: Silex exposes an intuitive and concise API.
Extensible: Silex has an extension system based around the Pimple service-container that
makes it easy to tie in third party libraries.
Testable: Silex uses Symfony's HttpKernel which abstracts request and response. This makes
it very easy to test apps and the framework itself. It also respects the HTTP specification and
encourages its proper use.
In a nutshell, you define controllers and map them to routes, all in one step.

Usage
Listing 1-1

1
2
3
4
5
6
7
8
9
10
11
12

<?php

// web/index.php
require_once __DIR__.'/../vendor/autoload.php';
$app = new Silex\Application();
$app->get('/hello/{name}', function ($name) use ($app) {
return 'Hello '.$app->escape($name);
});
$app->run();

All that is needed to get access to the Framework is to include the autoloader.
1. http://symfony.com/
2. http://pimple.sensiolabs.org/
3. http://www.sinatrarb.com/

PDF brought to you by

generated on November 18, 2015

Chapter 1: Introduction | 4

Next, a route for /hello/{name} that matches for GET requests is defined. When the route matches, the
function is executed and the return value is sent back to the client.
Finally, the app is run. Visit /hello/world to see the result. It's really that easy!

PDF brought to you by

generated on November 18, 2015

Chapter 1: Introduction | 5

Chapter 2

Usage

Installation
If you want to get started fast, download1 Silex as an archive and extract it, you should have the following
directory structure:
Listing 2-1

1
2
3
4
5
6

composer.json
composer.lock
vendor
...
web
index.php

If you want more flexibility, use Composer2 instead:

Listing 2-2

1 composer require silex/silex:~1.3

Web Server
All examples in the documentation relies on a well-configured web server; read the webserver
documentation to check yours.

Bootstrap
To bootstrap Silex, all you need to do is require the vendor/autoload.php file and create an instance of
Silex\Application. After your controller definitions, call the run method on your application:

1. http://silex.sensiolabs.org/download
2. http://getcomposer.org/

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 6

Listing 2-3

1
2
3
4
5
6
7
8

// web/index.php
require_once __DIR__.'/../vendor/autoload.php';
$app = new Silex\Application();

// ... definitions
$app->run();

When developing a website, you might want to turn on the debug mode to ease debugging:
Listing 2-4

1 $app['debug'] = true;

If your application is hosted behind a reverse proxy at address $ip, and you want Silex to trust the
X-Forwarded-For* headers, you will need to run your application like this:
Listing 2-5

1 use Symfony\Component\HttpFoundation\Request;
2
3 Request::setTrustedProxies(array($ip));
4 $app->run();

Routing
In Silex you define a route and the controller that is called when that route is matched. A route pattern
consists of:
Pattern: The route pattern defines a path that points to a resource. The pattern can include
variable parts and you are able to set RegExp requirements for them.
Method: One of the following HTTP methods: GET, POST, PUT, DELETE, PATCH, or OPTIONS.
This describes the interaction with the resource.
The controller is defined using a closure like this:
Listing 2-6

1 function () {
2
// ... do something
3 }

The return value of the closure becomes the content of the page.

Example GET Route

Here is an example definition of a GET route:
Listing 2-7

1 $blogPosts = array(
2
1 => array(
3
'date'
4
'author'
5
'title'
6
'body'

PDF brought to you by

generated on November 18, 2015

=>
=>
=>
=>

'2011-03-29',
'igorw',
'Using Silex',
'...',

Chapter 2: Usage | 7

7
),
8 );
9
10 $app->get('/blog', function () use ($blogPosts) {
11
$output = '';
12
foreach ($blogPosts as $post) {
13
$output .= $post['title'];
14
$output .= '<br />';
15
}
16
17
return $output;
18 });

Visiting /blog will return a list of blog post titles. The use statement means something different in this
context. It tells the closure to import the $blogPosts variable from the outer scope. This allows you to
use it from within the closure.

Dynamic Routing
Now, you can create another controller for viewing individual blog posts:
Listing 2-8

1 $app->get('/blog/{id}', function (Silex\Application $app, $id) use ($blogPosts) {

2
if (!isset($blogPosts[$id])) {
3
$app->abort(404, "Post $id does not exist.");
4
}
5
6
$post = $blogPosts[$id];
7
8
return "<h1>{$post['title']}</h1>".
9
"<p>{$post['body']}</p>";
10 });

This route definition has a variable {id} part which is passed to the closure.
The current Application is automatically injected by Silex to the Closure thanks to the type hinting.
When the post does not exist, you are using abort() to stop the request early. It actually throws an
exception, which you will see how to handle later on.

Example POST Route

POST routes signify the creation of a resource. An example for this is a feedback form. You will use the
mail function to send an e-mail:
Listing 2-9

1
2
3
4
5
6
7
8
9

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpFoundation\Response;
$app->post('/feedback', function (Request $request) {
$message = $request->get('message');
mail('[email protected]', '[YourSite] Feedback', $message);
return new Response('Thank you for your feedback!', 201);
});

It is pretty straightforward.

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 8

There is a SwiftmailerServiceProvider included that you can use instead of mail().

The current request is automatically injected by Silex to the Closure thanks to the type hinting. It is an
instance of Request3, so you can fetch variables using the request get method.
Instead of returning a string you are returning an instance of Response4. This allows setting an HTTP
status code, in this case it is set to 201 Created.
Silex always uses a Response internally, it converts strings to responses with status code 200.

Other methods
You can create controllers for most HTTP methods. Just call one of these methods on your application:
get, post, put, delete, patch, options:
Listing 2-10

1
2
3
4
5
6
7
8
9
10
11

$app->put('/blog/{id}', function ($id) {

// ...
});
$app->delete('/blog/{id}', function ($id) {
// ...
});
$app->patch('/blog/{id}', function ($id) {
// ...
});

Forms in most web browsers do not directly support the use of other HTTP methods. To use
methods other than GET and POST you can utilize a special form field with a name of _method.
The form's method attribute must be set to POST when using this field:
Listing 2-11

1 <form action="/my/target/route/" method="post">

2
<!-- ... -->
3
<input type="hidden" id="_method" name="_method" value="PUT" />
4 </form>

you need to explicitly enable this method override:

Listing 2-12

1 use Symfony\Component\HttpFoundation\Request;
2
3 Request::enableHttpMethodParameterOverride();
4 $app->run();

You can also call match, which will match all methods. This can be restricted via the method method:
Listing 2-13

3. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Request.html
4. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Response.html

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 9

1
2
3
4
5
6
7
8
9
10
11
12
13

$app->match('/blog', function () {
// ...
});
$app->match('/blog', function () {
// ...
})
->method('PATCH');
$app->match('/blog', function () {
// ...
})
->method('PUT|POST');

The order in which the routes are defined is significant. The first matching route will be used, so
place more generic routes at the bottom.

Route Variables
As it has been shown before you can define variable parts in a route like this:
Listing 2-14

1 $app->get('/blog/{id}', function ($id) {

2
// ...
3 });

It is also possible to have more than one variable part, just make sure the closure arguments match the
names of the variable parts:
Listing 2-15

1 $app->get('/blog/{postId}/{commentId}', function ($postId, $commentId) {

2
// ...
3 });

While it's not recommended, you could also do this (note the switched arguments):
Listing 2-16

1 $app->get('/blog/{postId}/{commentId}', function ($commentId, $postId) {

2
// ...
3 });

You can also ask for the current Request and Application objects:
Listing 2-17

1 $app->get('/blog/{id}', function (Application $app, Request $request, $id) {

2
// ...
3 });

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 10

Note for the Application and Request objects, Silex does the injection based on the type hinting
and not on the variable name:
Listing 2-18

1 $app->get('/blog/{id}', function (Application $foo, Request $bar, $id) {

2
// ...
3 });

Route Variable Converters

Before injecting the route variables into the controller, you can apply some converters:
Listing 2-19

1 $app->get('/user/{id}', function ($id) {

2
// ...
3 })->convert('id', function ($id) { return (int) $id; });

This is useful when you want to convert route variables to objects as it allows to reuse the conversion
code across different controllers:
Listing 2-20

1
2
3
4
5
6
7
8
9
10
11

$userProvider = function ($id) {

return new User($id);
};
$app->get('/user/{user}', function (User $user) {
// ...
})->convert('user', $userProvider);
$app->get('/user/{user}/edit', function (User $user) {
// ...
})->convert('user', $userProvider);

The converter callback also receives the Request as its second argument:
Listing 2-21

1
2
3
4
5
6
7

$callback = function ($post, Request $request) {

return new Post($request->attributes->get('slug'));
};
$app->get('/blog/{id}/{slug}', function (Post $post) {
// ...
})->convert('post', $callback);

A converter can also be defined as a service. For example, here is a user converter based on Doctrine
ObjectManager:
Listing 2-22

1
2
3
4
5
6
7
8
9
10
11

use Doctrine\Common\Persistence\ObjectManager;
use Symfony\Component\HttpKernel\Exception\NotFoundHttpException;
class UserConverter
{
private $om;
public function __construct(ObjectManager $om)
{
$this->om = $om;
}

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 11

12
13
14
15
16
17
18
19
20
21 }

public function convert($id)

{
if (null === $user = $this->om->find('User', (int) $id)) {
throw new NotFoundHttpException(sprintf('User %d does not exist', $id));
}
return $user;
}

The service will now be registered in the application, and the convert() method will be used as converter
(using the syntax service_name:method_name):
Listing 2-23

1
2
3
4
5
6
7

$app['converter.user'] = $app->share(function () {
return new UserConverter();
});
$app->get('/user/{user}', function (User $user) {
// ...
})->convert('user', 'converter.user:convert');

Requirements
In some cases you may want to only match certain expressions. You can define requirements using
regular expressions by calling assert on the Controller object, which is returned by the routing
methods.
The following will make sure the id argument is a positive integer, since \d+ matches any amount of
digits:
Listing 2-24

1 $app->get('/blog/{id}', function ($id) {

2
// ...
3 })
4 ->assert('id', '\d+');

You can also chain these calls:

Listing 2-25

1
2
3
4
5

$app->get('/blog/{postId}/{commentId}', function ($postId, $commentId) {

// ...
})
->assert('postId', '\d+')
->assert('commentId', '\d+');

Default Values
You can define a default value for any route variable by calling value on the Controller object:
Listing 2-26

1 $app->get('/{pageName}', function ($pageName) {

2
// ...
3 })
4 ->value('pageName', 'index');

This will allow matching /, in which case the pageName variable will have the value index.
PDF brought to you by
generated on November 18, 2015

Chapter 2: Usage | 12

Named Routes
Some providers (such as UrlGeneratorProvider) can make use of named routes. By default Silex will
generate an internal route name for you but you can give an explicit route name by calling bind:
Listing 2-27

1
2
3
4
5
6
7
8
9

$app->get('/', function () {
// ...
})
->bind('homepage');
$app->get('/blog/{id}', function ($id) {
// ...
})
->bind('blog_post');

Controllers as Classes
Instead of anonymous functions, you can also define your controllers as methods. By using the
ControllerClass::methodName syntax, you can tell Silex to lazily create the controller object for you:
Listing 2-28

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

$app->get('/', 'Acme\\Foo::bar');
use Silex\Application;
use Symfony\Component\HttpFoundation\Request;
namespace Acme
{
class Foo
{
public function bar(Request $request, Application $app)
{
// ...
}
}
}

This will load the Acme\Foo class on demand, create an instance and call the bar method to get the
response. You can use Request and Silex\Application type hints to get $request and $app injected.
It is also possible to define your controllers as services.

Global Configuration
If a controller setting must be applied to all controllers (a converter, a middleware, a requirement, or a
default value), configure it on $app['controllers'], which holds all application controllers:
Listing 2-29

1 $app['controllers']
2
->value('id', '1')
3
->assert('id', '\d+')
4
->requireHttps()
5
->method('get')
6
->convert('id', function () { /* ... */ })
7
->before(function () { /* ... */ })
8 ;

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 13

These settings are applied to already registered controllers and they become the defaults for new
controllers.
The global configuration does not apply to controller providers you might mount as they have their
own global configuration (read the dedicated chapter for more information).

Error Handlers
When an exception is thrown, error handlers allows you to display a custom error page to the user. They
can also be used to do additional things, such as logging.
To register an error handler, pass a closure to the error method which takes an Exception argument
and returns a response:
Listing 2-30

1 use Symfony\Component\HttpFoundation\Response;
2
3 $app->error(function (\Exception $e, $code) {
4
return new Response('We are sorry, but something went terribly wrong.');
5 });

You can also check for specific errors by using the $code argument, and handle them differently:
Listing 2-31

1 use Symfony\Component\HttpFoundation\Response;
2
3 $app->error(function (\Exception $e, $code) {
4
switch ($code) {
5
case 404:
6
$message = 'The requested page could not be found.';
7
break;
8
default:
9
$message = 'We are sorry, but something went terribly wrong.';
10
}
11
12
return new Response($message);
13 });

You can restrict an error handler to only handle some Exception classes by setting a more specific type
hint for the Closure argument:
Listing 2-32

1 $app->error(function (\LogicException $e, $code) {

2
// this handler will only handle \LogicException exceptions
3
// and exceptions that extends \LogicException
4 });

As Silex ensures that the Response status code is set to the most appropriate one depending on the
exception, setting the status on the response won't work. If you want to overwrite the status code,
set the X-Status-Code header:
Listing 2-33

1 return new Response('Error', 404 /* ignored */, array('X-Status-Code' => 200));

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 14

If you want to use a separate error handler for logging, make sure you register it with a higher priority
than response error handlers, because once a response is returned, the following handlers are ignored.
Silex ships with a provider for Monolog5 which handles logging of errors. Check out the Providers
chapter for details.

Silex comes with a default error handler that displays a detailed error message with the stack
trace when debug is true, and a simple error message otherwise. Error handlers registered via the
error() method always take precedence but you can keep the nice error messages when debug is
turned on like this:
Listing 2-34

1 use Symfony\Component\HttpFoundation\Response;
2
3 $app->error(function (\Exception $e, $code) use ($app) {
4
if ($app['debug']) {
5
return;
6
}
7
8
// ... logic to handle the error and return a Response
9 });

The error handlers are also called when you use abort to abort a request early:
Listing 2-35

1 $app->get('/blog/{id}', function (Silex\Application $app, $id) use ($blogPosts) {

2
if (!isset($blogPosts[$id])) {
3
$app->abort(404, "Post $id does not exist.");
4
}
5
6
return new Response(...);
7 });

You can convert errors to Exceptions, check out the cookbook chapter for details.

View Handlers
View Handlers allow you to intercept a controller result that is not a Response and transform it before it
gets returned to the kernel.
To register a view handler, pass a callable (or string that can be resolved to a callable) to the view()
method. The callable should accept some sort of result from the controller:
Listing 2-36

1 $app->view(function (array $controllerResult) use ($app) {

2
return $app->json($controllerResult);
3 });

View Handlers also receive the Request as their second argument, making them a good candidate for
basic content negotiation:
Listing 2-37

5. https://github.com/Seldaek/monolog

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 15

1 $app->view(function (array $controllerResult, Request $request) use ($app) {

2
$acceptHeader = $request->headers->get('Accept');
3
$bestFormat = $app['negotiator']->getBestFormat($acceptHeader, array('json', 'xml'));
4
5
if ('json' === $bestFormat) {
6
return new JsonResponse($controllerResult);
7
}
8
9
if ('xml' === $bestFormat) {
10
return $app['serializer.xml']->renderResponse($controllerResult);
11
}
12
13
return $controllerResult;
14 });

View Handlers will be examined in the order they are added to the application and Silex will use type
hints to determine if a view handler should be used for the current result, continuously using the return
value of the last view handler as the input for the next.
You must ensure that Silex receives a Response or a string as the result of the last view handler (or
controller) to be run.

Redirects
You can redirect to another page by returning a RedirectResponse response, which you can create by
calling the redirect method:
Listing 2-38

1 $app->get('/', function () use ($app) {

2
return $app->redirect('/hello');
3 });

This will redirect from / to /hello.

Forwards
When you want to delegate the rendering to another controller, without a round-trip to the browser (as
for a redirect), use an internal sub-request:
Listing 2-39

1
2
3
4
5
6
7
8
9

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpKernel\HttpKernelInterface;
$app->get('/', function () use ($app) {
// forward to /hello
$subRequest = Request::create('/hello', 'GET');
return $app->handle($subRequest, HttpKernelInterface::SUB_REQUEST);
});

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 16

If you are using UrlGeneratorProvider, you can also generate the URI:
Listing 2-40

1 $request = Request::create($app['url_generator']->generate('hello'), 'GET');

There's some more things that you need to keep in mind though. In most cases you will want to forward
some parts of the current master request to the sub-request. That includes: Cookies, server information,
session. Read more on how to make sub-requests.

JSON
If you want to return JSON data, you can use the json helper method. Simply pass it your data, status
code and headers, and it will create a JSON response for you:
Listing 2-41

1 $app->get('/users/{id}', function ($id) use ($app) {

2
$user = getUser($id);
3
4
if (!$user) {
5
$error = array('message' => 'The user was not found.');
6
7
return $app->json($error, 404);
8
}
9
10
return $app->json($user);
11 });

Streaming
It's possible to stream a response, which is important in cases when you don't want to buffer the data
being sent:
Listing 2-42

1 $app->get('/images/{file}', function ($file) use ($app) {

2
if (!file_exists(__DIR__.'/images/'.$file)) {
3
return $app->abort(404, 'The image was not found.');
4
}
5
6
$stream = function () use ($file) {
7
readfile($file);
8
};
9
10
return $app->stream($stream, 200, array('Content-Type' => 'image/png'));
11 });

If you need to send chunks, make sure you call ob_flush and flush after every chunk:
Listing 2-43

1 $stream = function () {
2
$fh = fopen('http://www.example.com/', 'rb');
3
while (!feof($fh)) {
4
echo fread($fh, 1024);
5
ob_flush();
6
flush();
7
}

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 17

8
9 };

fclose($fh);

Sending a file
If you want to return a file, you can use the sendFile helper method. It eases returning files that would
otherwise not be publicly available. Simply pass it your file path, status code, headers and the content
disposition and it will create a BinaryFileResponse response for you:
Listing 2-44

1 $app->get('/files/{path}', function ($path) use ($app) {

2
if (!file_exists('/base/path/' . $path)) {
3
$app->abort(404);
4
}
5
6
return $app->sendFile('/base/path/' . $path);
7 });

To further customize the response before returning

SymfonyComponentHttpFoundationBinaryFileResponse6:
Listing 2-45

it,

check

the

API

doc

for

1 return $app
2
->sendFile('/base/path/' . $path)
3
->setContentDisposition(ResponseHeaderBag::DISPOSITION_ATTACHMENT, 'pic.jpg')
4 ;

Traits
Silex comes with PHP traits that define shortcut methods.
You need to use PHP 5.4 or later to benefit from this feature.

Almost all built-in service providers have some corresponding PHP traits. To use them, define your own
Application class and include the traits you want:
Listing 2-46

1
2
3
4
5
6
7
8
9
10
11
12

use Silex\Application;
class MyApplication extends Application
{
use Application\TwigTrait;
use Application\SecurityTrait;
use Application\FormTrait;
use Application\UrlGeneratorTrait;
use Application\SwiftmailerTrait;
use Application\MonologTrait;
use Application\TranslationTrait;
}

6. http://api.symfony.com/master/Symfony/Component/HttpFoundation/BinaryFileResponse.html

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 18

You can also define your own Route class and use some traits:
Listing 2-47

1
2
3
4
5
6

use Silex\Route;
class MyRoute extends Route
{
use Route\SecurityTrait;
}

To use your newly defined route, override the $app['route_class'] setting:

Listing 2-48

1 $app['route_class'] = 'MyRoute';

Read each provider chapter to learn more about the added methods.

Security
Make sure to protect your application against attacks.

Escaping
When outputting any user input, make sure to escape it correctly to prevent Cross-Site-Scripting attacks.
Escaping HTML: PHP provides the htmlspecialchars function for this. Silex provides a
shortcut escape method:
Listing 2-49

1 $app->get('/name', function (Silex\Application $app) {

2
$name = $app['request']->get('name');
3
4
return "You provided the name {$app->escape($name)}.";
5 });

If you use the Twig template engine, you should use its escaping or even auto-escaping
mechanisms. Check out the Providers chapter for details.
Escaping JSON: If you want to provide data in JSON format you should use the Silex json
function:
Listing 2-50

1 $app->get('/name.json', function (Silex\Application $app) {

2
$name = $app['request']->get('name');
3
4
return $app->json(array('name' => $name));
5 });

PDF brought to you by

generated on November 18, 2015

Chapter 2: Usage | 19

Chapter 3

Middlewares
Silex allows you to run code, that changes the default Silex behavior, at different stages during the
handling of a request through middlewares:
Application middlewares are triggered independently of the current handled request;
Route middlewares are triggered when their associated route is matched.

Application Middlewares
The application middlewares are only run for the "master" Request.

Before Middleware
A before application middleware allows you to tweak the Request before the controller is executed:
Listing 3-1

1 $app->before(function (Request $request, Application $app) {

2
// ...
3 });

By default, the middleware is run after the routing and the security.
If you want your middleware to be run even if an exception is thrown early on (on a 404 or 403 error for
instance), then, you need to register it as an early event:
Listing 3-2

1 $app->before(function (Request $request, Application $app) {

2
// ...
3 }, Application::EARLY_EVENT);

In this case, the routing and the security won't have been executed, and so you won't have access to the
locale, the current route, or the security user.

PDF brought to you by

generated on November 18, 2015

Chapter 3: Middlewares | 20

The before middleware is an event registered on the Symfony request event.

After Middleware
An after application middleware allows you to tweak the Response before it is sent to the client:
Listing 3-3

1 $app->after(function (Request $request, Response $response) {

2
// ...
3 });

The after middleware is an event registered on the Symfony response event.

Finish Middleware
A finish application middleware allows you to execute tasks after the Response has been sent to the client
(like sending emails or logging):
Listing 3-4

1 $app->finish(function (Request $request, Response $response) {

2
// ...
3
// Warning: modifications to the Request or Response will be ignored
4 });

The finish middleware is an event registered on the Symfony terminate event.

Route Middlewares
Route middlewares are added to routes or route collections and they are only triggered when the
corresponding route is matched. You can also stack them:
Listing 3-5

1
2
3
4
5
6
7
8

$app->get('/somewhere', function () {
// ...
})
->before($before1)
->before($before2)
->after($after1)
->after($after2)
;

Before Middleware
A before route middleware is fired just before the route callback, but after the before application
middlewares:
PDF brought to you by
generated on November 18, 2015

Chapter 3: Middlewares | 21

Listing 3-6

1
2
3
4
5
6
7
8

$before = function (Request $request, Application $app) {

// ...
};
$app->get('/somewhere', function () {
// ...
})
->before($before);

After Middleware
An after route middleware is fired just after the route callback, but before the application after application
middlewares:
Listing 3-7

1
2
3
4
5
6
7
8

$after = function (Request $request, Response $response, Application $app) {

// ...
};
$app->get('/somewhere', function () {
// ...
})
->after($after);

Middlewares Priority
You can add as many middlewares as you want, in which case they are triggered in the same order as you
added them.
You can explicitly control the priority of your middleware by passing an additional argument to the
registration methods:
Listing 3-8

1 $app->before(function (Request $request) {

2
// ...
3 }, 32);

As a convenience, two constants allow you to register an event as early as possible or as late as possible:
Listing 3-9

1
2
3
4
5
6
7

$app->before(function (Request $request) {

// ...
}, Application::EARLY_EVENT);
$app->before(function (Request $request) {
// ...
}, Application::LATE_EVENT);

Short-circuiting the Controller

If a before middleware returns a Response object, the request handling is short-circuited (the next
middlewares won't be run, nor the route callback), and the Response is passed to the after middlewares
right away:

PDF brought to you by

generated on November 18, 2015

Chapter 3: Middlewares | 22

Listing 3-10

1 $app->before(function (Request $request) {

2
// redirect the user to the login screen if access to the Resource is protected
3
if (...) {
4
return new RedirectResponse('/login');
5
}
6 });

A RuntimeException is thrown if a before middleware does not return a Response or null.

PDF brought to you by

generated on November 18, 2015

Chapter 3: Middlewares | 23

Chapter 4

Organizing Controllers
When your application starts to define too many controllers, you might want to group them logically:
Listing 4-1

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

// define controllers for a blog

$blog = $app['controllers_factory'];
$blog->get('/', function () {
return 'Blog home page';
});
// ...
// define controllers for a forum
$forum = $app['controllers_factory'];
$forum->get('/', function () {
return 'Forum home page';
});
// define "global" controllers
$app->get('/', function () {
return 'Main home page';
});
$app->mount('/blog', $blog);
$app->mount('/forum', $forum);

$app['controllers_factory'] is a factory that returns a new instance of ControllerCollection

when used.

mount() prefixes all routes with the given prefix and merges them into the main Application. So, / will
map to the main home page, /blog/ to the blog home page, and /forum/ to the forum home page.
When mounting a route collection under /blog, it is not possible to define a route for the /blog
URL. The shortest possible URL is /blog/.

PDF brought to you by

generated on November 18, 2015

Chapter 4: Organizing Controllers | 24

When calling get(), match(), or any other HTTP methods on the Application, you are in fact
calling them on a default instance of ControllerCollection (stored in $app['controllers']).

Another benefit is the ability to apply settings on a set of controllers very easily. Building on the example
from the middleware section, here is how you would secure all controllers for the backend collection:
Listing 4-2

1 $backend = $app['controllers_factory'];
2
3 // ensure that all controllers require logged-in users
4 $backend->before($mustBeLogged);

For a better readability, you can split each controller collection into a separate file:
Listing 4-3

1
2
3
4
5
6
7
8

// blog.php
$blog = $app['controllers_factory'];
$blog->get('/', function () { return 'Blog home page'; });
return $blog;

// app.php
$app->mount('/blog', include 'blog.php');

Instead of requiring a file, you can also create a Controller provider.

PDF brought to you by

generated on November 18, 2015

Chapter 4: Organizing Controllers | 25

Chapter 5

Services
Silex is not only a framework, it is also a service container. It does this by extending Pimple1 which
provides a very simple service container.

Dependency Injection
You can skip this if you already know what Dependency Injection is.

Dependency Injection is a design pattern where you pass dependencies to services instead of creating
them from within the service or relying on globals. This generally leads to code that is decoupled, reusable, flexible and testable.
Here is an example of a class that takes a User object and stores it as a file in JSON format:
Listing 5-1

1 class JsonUserPersister
2 {
3
private $basePath;
4
5
public function __construct($basePath)
6
{
7
$this->basePath = $basePath;
8
}
9
10
public function persist(User $user)
11
{
12
$data = $user->getAttributes();
13
$json = json_encode($data);
14
$filename = $this->basePath.'/'.$user->id.'.json';
15
file_put_contents($filename, $json, LOCK_EX);

1. http://pimple.sensiolabs.org

PDF brought to you by

generated on November 18, 2015

Chapter 5: Services | 26

16
17 }

In this simple example the dependency is the basePath property. It is passed to the constructor. This
means you can create several independent instances with different base paths. Of course dependencies
do not have to be simple strings. More often they are in fact other services.
A service container is responsible for creating and storing services. It can recursively create dependencies
of the requested services and inject them. It does so lazily, which means a service is only created when
you actually need it.

Pimple
Pimple makes strong use of closures and implements the ArrayAccess interface.
We will start off by creating a new instance of Pimple -- and because Silex\Application extends Pimple
all of this applies to Silex as well:
Listing 5-2

1 $container = new Pimple();

or:
Listing 5-3

1 $app = new Silex\Application();

Parameters
You can set parameters (which are usually strings) by setting an array key on the container:
Listing 5-4

1 $app['some_parameter'] = 'value';

The array key can be any value. By convention dots are used for namespacing:
Listing 5-5

1 $app['asset.host'] = 'http://cdn.mysite.com/';

Reading parameter values is possible with the same syntax:

Listing 5-6

1 echo $app['some_parameter'];

Service definitions
Defining services is no different than defining parameters. You just set an array key on the container to
be a closure. However, when you retrieve the service, the closure is executed. This allows for lazy service
creation:
Listing 5-7

1 $app['some_service'] = function () {
2
return new Service();
3 };

And to retrieve the service, use:

Listing 5-8

PDF brought to you by

generated on November 18, 2015

Chapter 5: Services | 27

1 $service = $app['some_service'];

Every time you call $app['some_service'], a new instance of the service is created.

Shared services
You may want to use the same instance of a service across all of your code. In order to do that you can
make a shared service:
Listing 5-9

1 $app['some_service'] = $app->share(function () {
2
return new Service();
3 });

This will create the service on first invocation, and then return the existing instance on any subsequent
access.

Access container from closure

In many cases you will want to access the service container from within a service definition closure. For
example when fetching services the current service depends on.
Because of this, the container is passed to the closure as an argument:
Listing 5-10

1 $app['some_service'] = function ($app) {

2
return new Service($app['some_other_service'], $app['some_service.config']);
3 };

Here you can see an example of Dependency Injection. some_service depends on some_other_service
and takes some_service.config as configuration options. The dependency is only created when
some_service is accessed, and it is possible to replace either of the dependencies by simply overriding
those definitions.
This also works for shared services.

Going back to our initial example, here's how we could use the container to manage its dependencies:
Listing 5-11

1 $app['user.persist_path'] = '/tmp/users';
2 $app['user.persister'] = $app->share(function ($app) {
3
return new JsonUserPersister($app['user.persist_path']);
4 });

Protected closures
Because the container sees closures as factories for services, it will always execute them when reading
them.
In some cases you will however want to store a closure as a parameter, so that you can fetch it and execute
it yourself -- with your own arguments.
This is why Pimple allows you to protect your closures from being executed, by using the protect
method:

PDF brought to you by

generated on November 18, 2015

Chapter 5: Services | 28

Listing 5-12

1
2
3
4
5
6
7
8
9

$app['closure_parameter'] = $app->protect(function ($a, $b) {

return $a + $b;
});

// will not execute the closure

$add = $app['closure_parameter'];
// calling it now
echo $add(2, 3);

Note that protected closures do not get access to the container.

Core services
Silex defines a range of services.
request: Contains the current request object, which is an instance of Request2. It gives you
access to GET, POST parameters and lots more!
Example usage:
Listing 5-13

1 $id = $app['request']->get('id');

This is only available when a request is being served; you can only access it from within a
controller, an application before/after middlewares, or an error handler.
routes: The RouteCollection3 that is used internally. You can add, modify, read routes.
controllers: The Silex\ControllerCollection that is used internally. Check the Internals
chapter for more information.
dispatcher: The EventDispatcher4 that is used internally. It is the core of the Symfony system
and is used quite a bit by Silex.
resolver: The ControllerResolver5 that is used internally. It takes care of executing the
controller with the right arguments.
kernel: The HttpKernel6 that is used internally. The HttpKernel is the heart of Symfony, it
takes a Request as input and returns a Response as output.
request_context: The request context is a simplified representation of the request that is used
by the Router and the UrlGenerator.
exception_handler: The Exception handler is the default handler that is used when you don't
register one via the error() method or if your handler does not return a Response. Disable it
with unset($app['exception_handler']).
logger: A LoggerInterface7 instance. By default, logging is disabled as the value is set to null.
To enable logging you can either use the MonologServiceProvider or define your own logger
service that conforms to the PSR logger interface.

2. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Request.html
3. http://api.symfony.com/master/Symfony/Component/Routing/RouteCollection.html
4. http://api.symfony.com/master/Symfony/Component/EventDispatcher/EventDispatcher.html
5. http://api.symfony.com/master/Symfony/Component/HttpKernel/Controller/ControllerResolver.html
6. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpKernel.html
7. https://github.com/php-fig/log/blob/master/Psr/Log/LoggerInterface.php

PDF brought to you by

generated on November 18, 2015

Chapter 5: Services | 29

All of these Silex core services are shared.

Core parameters
request.http_port (optional): Allows you to override the default port for non-HTTPS URLs.
If the current request is HTTP, it will always use the current port.
Defaults to 80.
This parameter can be used by the UrlGeneratorProvider.
request.https_port (optional): Allows you to override the default port for HTTPS URLs. If
the current request is HTTPS, it will always use the current port.
Defaults to 443.
This parameter can be used by the UrlGeneratorProvider.
locale (optional): The locale of the user. When set before any request handling, it defines
the default locale (en by default). When a request is being handled, it is automatically set
according to the _locale request attribute of the current route.
debug (optional): Returns whether or not the application is running in debug mode.
Defaults to false.
charset (optional): The charset to use for Responses.
Defaults to UTF-8.

PDF brought to you by

generated on November 18, 2015

Chapter 5: Services | 30

Chapter 6

Providers
Providers allow the developer to reuse parts of an application into another one. Silex provides two
types of providers defined by two interfaces: ServiceProviderInterface for services and
ControllerProviderInterface for controllers.

Service Providers
Loading providers
In order to load and use a service provider, you must register it on the application:
Listing 6-1

1 $app = new Silex\Application();

2
3 $app->register(new Acme\DatabaseServiceProvider());

You can also provide some parameters as a second argument. These will be set after the provider is
registered, but before it is booted:
Listing 6-2

1 $app->register(new Acme\DatabaseServiceProvider(), array(

2
'database.dsn'
=> 'mysql:host=localhost;dbname=myapp',
3
'database.user'
=> 'root',
4
'database.password' => 'secret_root_password',
5 ));

Conventions
You need to watch out in what order you do certain things when interacting with providers. Just keep
these rules in mind:
Overriding existing services must occur after the provider is registered.
Reason: If the service already exists, the provider will overwrite it.

PDF brought to you by

generated on November 18, 2015

Chapter 6: Providers | 31

 You can set parameters any time after the provider is registered, but before the service is
accessed.
Reason: Providers can set default values for parameters. Just like with services, the provider will
overwrite existing values.

Included providers
There are a few providers that you get out of the box. All of these are within the Silex\Provider
namespace:

DoctrineServiceProvider
FormServiceProvider
HttpCacheServiceProvider
MonologServiceProvider
RememberMeServiceProvider
SecurityServiceProvider
SerializerServiceProvider
ServiceControllerServiceProvider
SessionServiceProvider
SwiftmailerServiceProvider
TranslationServiceProvider
TwigServiceProvider
UrlGeneratorServiceProvider
ValidatorServiceProvider

Third party providers

Some service providers are developed by the community. Those third-party providers are listed on Silex'
repository wiki1.
You are encouraged to share yours.

Creating a provider
Providers must implement the Silex\ServiceProviderInterface:
Listing 6-3

1 interface ServiceProviderInterface
2 {
3
public function register(Application $app);
4
5
public function boot(Application $app);
6 }

The register() method defines services on the application which then may make use of other services
and parameters.
The boot() method configures the application, just before it handles a request.
Here is an example of such a provider:
Listing 6-4

1 namespace Acme;
2
3 use Silex\Application;
4 use Silex\ServiceProviderInterface;

1. https://github.com/silexphp/Silex/wiki/Third-Party-ServiceProviders

PDF brought to you by

generated on November 18, 2015

Chapter 6: Providers | 32

5
6 class HelloServiceProvider implements ServiceProviderInterface
7 {
8
public function register(Application $app)
9
{
10
$app['hello'] = $app->protect(function ($name) use ($app) {
11
$default = $app['hello.default_name'] ? $app['hello.default_name'] : '';
12
$name = $name ?: $default;
13
14
return 'Hello '.$app->escape($name);
15
});
16
}
17
18
public function boot(Application $app)
19
{
20
}
21 }

This class provides a hello service which is a protected closure. It takes a name argument and will return
hello.default_name if no name is given. If the default is also missing, it will use an empty string.
You can now use this provider as follows:
Listing 6-5

1
2
3
4
5
6
7
8
9
10
11

$app = new Silex\Application();

$app->register(new Acme\HelloServiceProvider(), array(
'hello.default_name' => 'Igor',
));
$app->get('/hello', function () use ($app) {
$name = $app['request']->get('name');
return $app['hello']($name);
});

In this example we are getting the name parameter from the query string, so the request path would have
to be /hello?name=Fabien.

Controller Providers
Loading providers
In order to load and use a controller provider, you must "mount" its controllers under a path:
Listing 6-6

1 $app = new Silex\Application();

2
3 $app->mount('/blog', new Acme\BlogControllerProvider());

All controllers defined by the provider will now be available under the /blog path.

Creating a provider
Providers must implement the Silex\ControllerProviderInterface:
Listing 6-7

PDF brought to you by

generated on November 18, 2015

Chapter 6: Providers | 33

1 interface ControllerProviderInterface
2 {
3
public function connect(Application $app);
4 }

Here is an example of such a provider:

Listing 6-8

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

namespace Acme;
use Silex\Application;
use Silex\ControllerProviderInterface;
class HelloControllerProvider implements ControllerProviderInterface
{
public function connect(Application $app)
{
// creates a new controller based on the default route
$controllers = $app['controllers_factory'];
$controllers->get('/', function (Application $app) {
return $app->redirect('/hello');
});
return $controllers;
}
}

The connect method must return an instance of ControllerCollection. ControllerCollection is the

class where all controller related methods are defined (like get, post, match, ...).
The Application class acts in fact as a proxy for these methods.

You can use this provider as follows:

Listing 6-9

1 $app = new Silex\Application();

2
3 $app->mount('/blog', new Acme\HelloControllerProvider());

In this example, the /blog/ path now references the controller defined in the provider.
You can also define a provider that implements both the service and the controller provider
interface and package in the same class the services needed to make your controllers work.

PDF brought to you by

generated on November 18, 2015

Chapter 6: Providers | 34

Chapter 7

Testing
Because Silex is built on top of Symfony, it is very easy to write functional tests for your application.
Functional tests are automated software tests that ensure that your code is working correctly. They go
through the user interface, using a fake browser, and mimic the actions a user would do.

Why
If you are not familiar with software tests, you may be wondering why you would need this. Every time
you make a change to your application, you have to test it. This means going through all the pages and
making sure they are still working. Functional tests save you a lot of time, because they enable you to test
your application in usually under a second by running a single command.
For more information on functional testing, unit testing, and automated software tests in general, check
out PHPUnit1 and Bulat Shakirzyanov's talk on Clean Code.

PHPUnit
PHPUnit2 is the de-facto standard testing framework for PHP. It was built for writing unit tests, but
it can be used for functional tests too. You write tests by creating a new class, that extends the
PHPUnit_Framework_TestCase. Your test cases are methods prefixed with test:
Listing 7-1

1 class ContactFormTest extends \PHPUnit_Framework_TestCase

2 {
3
public function testInitialPage()
4
{
5
...
6
}
7 }

1. https://github.com/sebastianbergmann/phpunit
2. https://github.com/sebastianbergmann/phpunit

PDF brought to you by

generated on November 18, 2015

Chapter 7: Testing | 35

In your test cases, you do assertions on the state of what you are testing. In this case we are testing a
contact form, so we would want to assert that the page loaded correctly and contains our form:
Listing 7-2

1 public function testInitialPage()

2 {
3
$statusCode = ...
4
$pageContent = ...
5
6
$this->assertEquals(200, $statusCode);
7
$this->assertContains('Contact us', $pageContent);
8
$this->assertContains('<form', $pageContent);
9 }

Here you see some of the available assertions. There is a full list available in the Writing Tests for
PHPUnit3 section of the PHPUnit documentation.

WebTestCase
Symfony provides a WebTestCase class that can be used to write functional tests. The Silex version of
this class is Silex\WebTestCase, and you can use it by making your test extend it:
Listing 7-3

1
2
3
4
5
6

use Silex\WebTestCase;
class ContactFormTest extends WebTestCase
{
...
}

If you need to override the setUp() method, don't forget to call the parent (parent::setUp()) to
call the Silex default setup.

If you want to use the Symfony WebTestCase class you will need to explicitly install its
dependencies for your project:
Listing 7-4

1 composer require --dev symfony/browser-kit symfony/css-selector

For your WebTestCase, you will have to implement a createApplication method, which returns your
application instance:
Listing 7-5

1 public function createApplication()

2 {
3
// app.php must return an Application instance
4
return require __DIR__.'/path/to/app.php';
5 }

Make sure you do not use require_once here, as this method will be executed before every test.

3. https://phpunit.de/manual/current/en/writing-tests-for-phpunit.html

PDF brought to you by

generated on November 18, 2015

Chapter 7: Testing | 36

By default, the application behaves in the same way as when using it from a browser. But when an
error occurs, it is sometimes easier to get raw exceptions instead of HTML pages. It is rather simple
if you tweak the application configuration in the createApplication() method like follows:
Listing 7-6

1 public function createApplication()

2 {
3
$app = require __DIR__.'/path/to/app.php';
4
$app['debug'] = true;
5
unset($app['exception_handler']);
6
7
return $app;
8 }

If your application use sessions, set session.test to true to simulate sessions:

Listing 7-7

1 public function createApplication()

2 {
3
// ...
4
5
$app['session.test'] = true;
6
7
// ...
8 }

The WebTestCase provides a createClient method. A client acts as a browser, and allows you to
interact with your application. Here's how it works:
Listing 7-8

1 public function testInitialPage()

2 {
3
$client = $this->createClient();
4
$crawler = $client->request('GET', '/');
5
6
$this->assertTrue($client->getResponse()->isOk());
7
$this->assertCount(1, $crawler->filter('h1:contains("Contact us")'));
8
$this->assertCount(1, $crawler->filter('form'));
9
...
10 }

There are several things going on here. You have both a Client and a Crawler.
You can also access the application through $this->app.

Client
The client represents a browser. It holds your browsing history, cookies and more. The request method
allows you to make a request to a page on your application.
You can find some documentation for it in the client section of the testing chapter of the Symfony
documentation.

PDF brought to you by

generated on November 18, 2015

Chapter 7: Testing | 37

Crawler
The crawler allows you to inspect the content of a page. You can filter it using CSS expressions and lots
more.
You can find some documentation for it in the crawler section of the testing chapter of the Symfony
documentation.

Configuration
The suggested way to configure PHPUnit is to create a phpunit.xml.dist file, a tests folder and your
tests in tests/YourApp/Tests/YourTest.php. The phpunit.xml.dist file should look like this:
Listing 7-9

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

<?xml version="1.0" encoding="UTF-8"?>

<phpunit backupGlobals="false"
backupStaticAttributes="false"
colors="true"
convertErrorsToExceptions="true"
convertNoticesToExceptions="true"
convertWarningsToExceptions="true"
processIsolation="false"
stopOnFailure="false"
syntaxCheck="false"
>
<testsuites>
<testsuite name="YourApp Test Suite">
<directory>./tests/</directory>
</testsuite>
</testsuites>
</phpunit>

Your tests/YourApp/Tests/YourTest.php should look like this:

Listing 7-10

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

namespace YourApp\Tests;
use Silex\WebTestCase;
class YourTest extends WebTestCase
{
public function createApplication()
{
return require __DIR__.'/../../../app.php';
}
public function testFooBar()
{
...
}
}

Now, when running phpunit on the command line, tests should run.

PDF brought to you by

generated on November 18, 2015

Chapter 7: Testing | 38

Chapter 8

Accepting a JSON Request Body

A common need when building a restful API is the ability to accept a JSON encoded entity from the
request body.
An example for such an API could be a blog post creation.

Example API
In this example we will create an API for creating a blog post. The following is a spec of how we want it
to work.

Request
In the request we send the data for the blog post as a JSON object. We also indicate that using the
Content-Type header:
Listing 8-1

1
2
3
4
5
6

POST /blog/posts
Accept: application/json
Content-Type: application/json
Content-Length: 57
{"title":"Hello World!","body":"This is my first post!"}

Response
The server responds with a 201 status code, telling us that the post was created. It tells us the ContentType of the response, which is also JSON:
Listing 8-2

1
2
3
4

HTTP/1.1 201 Created

Content-Type: application/json
Content-Length: 65
Connection: close

PDF brought to you by

generated on November 18, 2015

Chapter 8: Accepting a JSON Request Body | 39

5
6 {"id":"1","title":"Hello World!","body":"This is my first post!"}

Parsing the request body

The request body should only be parsed as JSON if the Content-Type header begins with application/
json. Since we want to do this for every request, the easiest solution is to use an application before
middleware.
We simply use json_decode to parse the content of the request and then replace the request data on the
$request object:
Listing 8-3

1
2
3
4
5
6
7
8
9

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpFoundation\ParameterBag;
$app->before(function (Request $request) {
if (0 === strpos($request->headers->get('Content-Type'), 'application/json')) {
$data = json_decode($request->getContent(), true);
$request->request->replace(is_array($data) ? $data : array());
}
});

Controller implementation
Our controller will create a new blog post from the data provided and will return the post object,
including its id, as JSON:
Listing 8-4

1
2
3
4
5
6
7
8
9
10
11
12
13

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpFoundation\Response;
$app->post('/blog/posts', function (Request $request) use ($app) {
$post = array(
'title' => $request->request->get('title'),
'body' => $request->request->get('body'),
);
$post['id'] = createPost($post);
return $app->json($post, 201);
});

Manual testing
In order to manually test our API, we can use the curl command line utility, which allows sending HTTP
requests:
Listing 8-5

1 $ curl http://blog.lo/blog/posts -d '{"title":"Hello World!","body":"This is my first

2 post!"}' -H 'Content-Type: application/json'
{"id":"1","title":"Hello World!","body":"This is my first post!"}

PDF brought to you by

generated on November 18, 2015

Chapter 8: Accepting a JSON Request Body | 40

Chapter 9

Using PdoSessionStorage to store Sessions in

the Database
By default, the SessionServiceProvider writes session information in files using Symfony
NativeFileSessionStorage. Most medium to large websites use a database to store sessions instead of files,
because databases are easier to use and scale in a multi-webserver environment.
Symfony's NativeSessionStorage1 has multiple storage handlers and one of them uses PDO to store
sessions, PdoSessionHandler2. To use it, replace the session.storage.handler service in your
application like explained below.

With a dedicated PDO service

Listing 9-1

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

use Symfony\Component\HttpFoundation\Session\Storage\Handler\PdoSessionHandler;
$app->register(new Silex\Provider\SessionServiceProvider());
$app['pdo.dsn'] = 'mysql:dbname=mydatabase';
$app['pdo.user'] = 'myuser';
$app['pdo.password'] = 'mypassword';
$app['session.db_options'] = array(
'db_table'
=> 'session',
'db_id_col'
=> 'session_id',
'db_data_col'
=> 'session_value',
'db_time_col'
=> 'session_time',
);
$app['pdo'] = $app->share(function () use ($app) {
return new PDO(

1. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Session/Storage/NativeSessionStorage.html
2. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Session/Storage/Handler/PdoSessionHandler.html

PDF brought to you by

generated on November 18, 2015

Chapter 9: Using PdoSessionStorage to store Sessions in the Database | 41

18
$app['pdo.dsn'],
19
$app['pdo.user'],
20
$app['pdo.password']
21
);
22 });
23
24 $app['session.storage.handler'] = $app->share(function () use ($app) {
25
return new PdoSessionHandler(
26
$app['pdo'],
27
$app['session.db_options'],
28
$app['session.storage.options']
29
);
30 });

Using the DoctrineServiceProvider

When using the DoctrineServiceProvider You don't have to make another database connection, simply
pass the getWrappedConnection method.
Listing 9-2

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

use Symfony\Component\HttpFoundation\Session\Storage\Handler\PdoSessionHandler;
$app->register(new Silex\Provider\SessionServiceProvider());
$app['session.db_options'] = array(
'db_table'
=> 'session',
'db_id_col'
=> 'session_id',
'db_data_col'
=> 'session_value',
'db_time_col'
=> 'session_time',
);
$app['session.storage.handler'] = $app->share(function () use ($app) {
return new PdoSessionHandler(
$app['db']->getWrappedConnection(),
$app['session.db_options'],
$app['session.storage.options']
);
});

Database structure
PdoSessionStorage needs a database table with 3 columns:
session_id: ID column (VARCHAR(255) or larger)
session_value: Value column (TEXT or CLOB)
session_time: Time column (INTEGER)
You can find examples of SQL statements to create the session table in the Symfony cookbook3

3. http://symfony.com/doc/current/cookbook/configuration/pdo_session_storage.html#example-sql-statements

PDF brought to you by

generated on November 18, 2015

Chapter 9: Using PdoSessionStorage to store Sessions in the Database | 42

Chapter 10

Disabling CSRF Protection on a Form using the

FormExtension
The FormExtension provides a service for building form in your application with the Symfony Form
component. By default, the FormExtension uses the CSRF Protection avoiding Cross-site request forgery,
a method by which a malicious user attempts to make your legitimate users unknowingly submit data
that they don't intend to submit.
You can find more details about CSRF Protection and CSRF token in the Symfony Book1.
In some cases (for example, when embedding a form in an html email) you might want not to use this
protection. The easiest way to avoid this is to understand that it is possible to give specific options to
your form builder through the createBuilder() function.

Example
Listing 10-1

1 $form = $app['form.factory']->createBuilder('form', null, array('csrf_protection' =>

false));

That's it, your form could be submitted from everywhere without CSRF Protection.

Going further
This specific example showed how to change the csrf_protection in the $options parameter of the
createBuilder() function. More of them could be passed through this parameter, it is as simple as using
the Symfony getDefaultOptions() method in your form classes. See more here2.

1. http://symfony.com/doc/current/book/forms.html#csrf-protection
2. http://symfony.com/doc/current/book/forms.html#book-form-creating-form-classes

PDF brought to you by

generated on November 18, 2015

Chapter 10: Disabling CSRF Protection on a Form using the FormExtension | 43

Chapter 11

Using YAML to configure Validation

Simplicity is at the heart of Silex so there is no out of the box solution to use YAML files for validation.
But this doesn't mean that this is not possible. Let's see how to do it.
First, you need to install the YAML Component:
Listing 11-1

1 composer require symfony/yaml

Next, you need to tell the Validation Service that you are not using StaticMethodLoader to load your
class metadata but a YAML file:
Listing 11-2

1 $app->register(new ValidatorServiceProvider());
2
3 $app['validator.mapping.class_metadata_factory'] = new
4 Symfony\Component\Validator\Mapping\ClassMetadataFactory(
5
new Symfony\Component\Validator\Mapping\Loader\YamlFileLoader(__DIR__.'/validation.yml')
);

Now, we can replace the usage of the static method and move all the validation rules to validation.yml:
Listing 11-3

1 # validation.yml
2 Post:
3
properties:
4
title:
5
- NotNull: ~
6
- NotBlank: ~
7
body:
8
- Min: 100

PDF brought to you by

generated on November 18, 2015

Chapter 11: Using YAML to configure Validation | 44

Chapter 12

Making sub-Requests
Since Silex is based on the HttpKernelInterface, it allows you to simulate requests against your
application. This means that you can embed a page within another, it also allows you to forward a request
which is essentially an internal redirect that does not change the URL.

Basics
You can make a sub-request by calling the handle method on the Application. This method takes three
arguments:
$request
$request: An instance of the Request class which represents the
HTTP request.
$type:
Must
be
either
HttpKernelInterface::MASTER_REQUEST
or
HttpKernelInterface::SUB_REQUEST. Certain listeners are only executed for the master
request, so it's important that this is set to SUB_REQUEST.
$catch: Catches exceptions and turns them into a response with status code 500. This
argument defaults to true. For sub-requests you will most likely want to set it to false.
By calling handle, you can make a sub-request manually. Here's an example:
Listing 12-1

1
2
3
4
5

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpKernel\HttpKernelInterface;
$subRequest = Request::create('/');
$response = $app->handle($subRequest, HttpKernelInterface::SUB_REQUEST, false);

There's some more things that you need to keep in mind though. In most cases you will want to forward
some parts of the current master request to the sub-request like cookies, server information, or the
session.
Here is a more advanced example that forwards said information ($request holds the master request):
Listing 12-2

PDF brought to you by

generated on November 18, 2015

Chapter 12: Making sub-Requests | 45

1
2
3
4
5
6
7
8
9

use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpKernel\HttpKernelInterface;
$subRequest = Request::create('/', 'GET', array(), $request->cookies->all(), array(),
$request->server->all());
if ($request->getSession()) {
$subRequest->setSession($request->getSession());
}
$response = $app->handle($subRequest, HttpKernelInterface::SUB_REQUEST, false);

To forward this response to the client, you can simply return it from a controller:
Listing 12-3

1
2
3
4
5
6
7
8
9
10

use Silex\Application;
use Symfony\Component\HttpFoundation\Request;
use Symfony\Component\HttpKernel\HttpKernelInterface;
$app->get('/foo', function (Application $app, Request $request) {
$subRequest = Request::create('/', ...);
$response = $app->handle($subRequest, HttpKernelInterface::SUB_REQUEST, false);
return $response;
});

If you want to embed the response as part of a larger page you can call Response::getContent:
Listing 12-4

1
2
3
4
5

$header = ...;
$footer = ...;
$body = $response->getContent();
return $header.$body.$footer;

Rendering pages in Twig templates

The TwigServiceProvider provides a render function that you can use in Twig templates. It gives you a
convenient way to embed pages.
Listing 12-5

1 {{ render('/sidebar') }}

For details, refer to the TwigServiceProvider docs.

Edge Side Includes

You can use ESI either through the HttpCacheServiceProvider or a reverse proxy cache such as Varnish.
This also allows you to embed pages, however it also gives you the benefit of caching parts of the page.
Here is an example of how you would embed a page via ESI:
Listing 12-6

1 <esi:include src="/sidebar" />

For details, refer to the HttpCacheServiceProvider docs.

PDF brought to you by

generated on November 18, 2015

Chapter 12: Making sub-Requests | 46

Dealing with the request base URL

One thing to watch out for is the base URL. If your application is not hosted at the webroot of your web
server, then you may have an URL like http://example.org/foo/index.php/articles/42.
In this case, /foo/index.php is your request base path. Silex accounts for this path prefix in the routing
process, it reads it from $request->server. In the context of sub-requests this can lead to issues, because
if you do not prepend the base path the request could mistake a part of the path you want to match as
the base path and cut it off.
You can prevent that from happening by always prepending the base path when constructing a request:
Listing 12-7

1 $url = $request->getUriForPath('/');
2 $subRequest = Request::create($url, 'GET', array(), $request->cookies->all(), array(),
$request->server->all());

This is something to be aware of when making sub-requests by hand.

Services depending on the Request

The container is a concept that is global to a Silex application, since the application object is the
container. Any request that is run against an application will re-use the same set of services. Since these
services are mutable, code in a master request can affect the sub-requests and vice versa. Any services
depending on the request service will store the first request that they get (could be master or subrequest), and keep using it, even if that request is already over.
Instead of injecting the request service, you should always inject the request_stack one instead.

PDF brought to you by

generated on November 18, 2015

Chapter 12: Making sub-Requests | 47

Chapter 13

Converting Errors to Exceptions

Silex catches exceptions that are thrown from within a request/response cycle. However, it does not catch
PHP errors and notices. This recipe tells you how to catch them by converting them to exceptions.

Registering the ErrorHandler

The Symfony/Debug package has an ErrorHandler class that solves this problem. It converts all errors to
exceptions, and exceptions are then caught by Silex.
Register it by calling the static register method:
Listing 13-1

1 use Symfony\Component\Debug\ErrorHandler;
2
3 ErrorHandler::register();

It is recommended that you do this as early as possible.

Handling fatal errors

To handle fatal errors, you can additionally register a global ExceptionHandler:
Listing 13-2

1 use Symfony\Component\Debug\ExceptionHandler;
2
3 ExceptionHandler::register();

In production you may want to disable the debug output by passing false as the $debug argument:
Listing 13-3

1 use Symfony\Component\Debug\ExceptionHandler;
2
3 ExceptionHandler::register(false);

PDF brought to you by

generated on November 18, 2015

Chapter 13: Converting Errors to Exceptions | 48

Chapter 14

Using multiple Monolog Loggers

Having separate instances of Monolog for different parts of your system is often desirable and allows you
to configure them independently, allowing for fine grained control of where your logging goes and in
what detail.
This simple example allows you to quickly configure several monolog instances, using the bundled
handler, but each with a different channel.
Listing 14-1

1
2
3
4
5
6
7
8
9
10
11
12

$app['monolog.factory'] = $app->protect(function ($name) use ($app) {

$log = new $app['monolog.logger.class']($name);
$log->pushHandler($app['monolog.handler']);
return $log;
});
foreach (array('auth', 'payments', 'stats') as $channel) {
$app['monolog.'.$channel] = $app->share(function ($app) use ($channel) {
return $app['monolog.factory']($channel);
});
}

As your application grows, or your logging needs for certain areas of the system become apparent,
it should be straightforward to then configure that particular service separately, including your
customizations.
Listing 14-2

1 use Monolog\Handler\StreamHandler;
2
3 $app['monolog.payments'] = $app->share(function ($app) {
4
$log = new $app['monolog.logger.class']('payments');
5
$handler = new StreamHandler($app['monolog.payments.logfile'],
6 $app['monolog.payment.level']);
7
$log->pushHandler($handler);
8
9
return $log;
});

PDF brought to you by

generated on November 18, 2015

Chapter 14: Using multiple Monolog Loggers | 49

Alternatively, you could attempt to make the factory more complicated, and rely on some conventions,
such as checking for an array of handlers registered with the container with the channel name, defaulting
to the bundled handler.
Listing 14-3

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

use Monolog\Handler\StreamHandler;
use Monolog\Logger;
$app['monolog.factory'] = $app->protect(function ($name) use ($app) {
$log = new $app['monolog.logger.class']($name);
$handlers = isset($app['monolog.'.$name.'.handlers'])
? $app['monolog.'.$name.'.handlers']
: array($app['monolog.handler']);
foreach ($handlers as $handler) {
$log->pushHandler($handler);
}
return $log;
});
$app['monolog.payments.handlers'] = $app->share(function ($app) {
return array(
new StreamHandler(__DIR__.'/../payments.log', Logger::DEBUG),
);
});

PDF brought to you by

generated on November 18, 2015

Chapter 14: Using multiple Monolog Loggers | 50

Chapter 15

Managing Assets in Templates

A Silex application is not always hosted at the web root directory. To avoid repeating the base path
whenever you link to another page, it is highly recommended to use the URL generator service provider.
But what about images, stylesheets, or JavaScript files? Their URLs are not managed by the Silex router,
but nonetheless, they need to get prefixed by the base path. Fortunately, the Request object contain the
application base path that needs to be prepended:
Listing 15-1

1 // generate a link to the stylesheets in /css/styles.css

2 $request->getBasePath().'/css/styles.css';

And doing the same in a Twig template is as easy as it can get:

Listing 15-2

1 {{ app.request.basepath }}/css/styles.css

If your assets are hosted under a different host, you might want to abstract the path by defining a Silex
parameter:
Listing 15-3

1 $app['asset_path'] = 'http://assets.examples.com';

Using it in a template is as easy as before:

Listing 15-4

1 {{ app.asset_path }}/css/styles.css

If you need to implement some logic independently of the asset, define a service instead:
Listing 15-5

1 $app['asset_path'] = $app->share(function () {
2
// implement whatever logic you need to determine the asset path
3
4
return 'http://assets.examples.com';
5 });

Usage is exactly the same as before:

Listing 15-6

PDF brought to you by

generated on November 18, 2015

Chapter 15: Managing Assets in Templates | 51

1 {{ app.asset_path }}/css/styles.css

If the asset location depends on the asset type or path, you will need more abstraction; here is one way to
do that with a Twig function:
Listing 15-7

1 $app['twig'] = $app->share($app->extend('twig', function($twig, $app) {

2
$twig->addFunction(new \Twig_SimpleFunction('asset', function ($asset) {
3
// implement whatever logic you need to determine the asset path
4
5
return sprintf('http://assets.examples.com/%s', ltrim($asset, '/'));
6
}));
7
8
return $twig;
9 }));

The asset function can then be used in your templates:

Listing 15-8

1 {{ asset('/css/styles.css') }}

PDF brought to you by

generated on November 18, 2015

Chapter 15: Managing Assets in Templates | 52

Chapter 16

Internals
This chapter will tell you how Silex works internally.

Silex
Application
The application is the main interface to Silex. It implements Symfony's HttpKernelInterface1, so you can
pass a Request2 to the handle method and it will return a Response3.
It extends the Pimple service container, allowing for flexibility on the outside as well as the inside. You
could replace any service, and you are also able to read them.
The application makes strong use of the EventDispatcher4 to hook into the Symfony HttpKernel5 events.
This allows fetching the Request, converting string responses into Response objects and handling
Exceptions. We also use it to dispatch some custom events like before/after middlewares and errors.

Controller
The Symfony Route6 is actually quite powerful. Routes can be named, which allows for URL generation.
They can also have requirements for the variable parts. In order to allow setting these through a nice
interface, the match method (which is used by get, post, etc.) returns an instance of the Controller,
which wraps a route.

1. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpKernelInterface.html
2. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Request.html
3. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Response.html
4. http://api.symfony.com/master/Symfony/Component/EventDispatcher/EventDispatcher.html
5. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpKernel.html
6. http://api.symfony.com/master/Symfony/Component/Routing/Route.html

PDF brought to you by

generated on November 18, 2015

Chapter 16: Internals | 53

ControllerCollection
One of the goals of exposing the RouteCollection7 was to make it mutable, so providers could add stuff to
it. The challenge here is the fact that routes know nothing about their name. The name only has meaning
in context of the RouteCollection and cannot be changed.
To solve this challenge we came up with a staging area for routes. The ControllerCollection holds the
controllers until flush is called, at which point the routes are added to the RouteCollection. Also, the
controllers are then frozen. This means that they can no longer be modified and will throw an Exception
if you try to do so.
Unfortunately no good way for flushing implicitly could be found, which is why flushing is now always
explicit. The Application will flush, but if you want to read the ControllerCollection before the
request takes place, you will have to call flush yourself.
The Application provides a shortcut flush method for flushing the ControllerCollection.
Instead
of
creating
an
instance
of
$app['controllers_factory'] factory instead.

RouteCollection

yourself,

use

the

Symfony
Following Symfony components are used by Silex:

HttpFoundation: For Request and Response.

HttpKernel: Because we need a heart.
Routing: For matching defined routes.
EventDispatcher: For hooking into the HttpKernel.

For more information, check out the Symfony website8.

7. http://api.symfony.com/master/Symfony/Component/Routing/RouteCollection.html
8. http://symfony.com/

PDF brought to you by

generated on November 18, 2015

Chapter 16: Internals | 54

Chapter 17

Contributing
We are open to contributions to the Silex code. If you find a bug or want to contribute a provider, just
follow these steps:

Fork the Silex repository1;

Make your feature addition or bug fix;
Add tests for it;
Optionally, add some documentation;
Send a pull request2, to the correct `target branch`_.
Any code you contribute must be licensed under the MIT License.

1. https://github.com/silexphp/Silex
2. https://help.github.com/articles/creating-a-pull-request

PDF brought to you by

generated on November 18, 2015

Chapter 17: Contributing | 55

Chapter 18

Writing Documentation
The documentation is written in reStructuredText3 and can be generated using sphinx4.
Listing 18-1

1 $ cd doc
2 $ sphinx-build -b html . build

3. http://docutils.sourceforge.net/rst.html
4. http://sphinx-doc.org

PDF brought to you by

generated on November 18, 2015

Chapter 18: Writing Documentation | 56

Chapter 19

DoctrineServiceProvider
The DoctrineServiceProvider provides integration with the Doctrine DBAL1 for easy database access
(Doctrine ORM integration is not supplied).

Parameters
db.options: Array of Doctrine DBAL options.
These options are available:
driver: The database driver to use, defaults to pdo_mysql. Can be any of:
pdo_mysql, pdo_sqlite, pdo_pgsql, pdo_oci, oci8, ibm_db2, pdo_ibm,
pdo_sqlsrv.
dbname: The name of the database to connect to.
host: The host of the database to connect to. Defaults to localhost.
user: The user of the database to connect to. Defaults to root.
password: The password of the database to connect to.
charset: Only relevant for pdo_mysql, and pdo_oci/oci8, specifies the charset used
when connecting to the database.
path: Only relevant for pdo_sqlite, specifies the path to the SQLite database.
port: Only relevant for pdo_mysql, pdo_pgsql, and pdo_oci/oci8, specifies the
port of the database to connect to.
These and additional options are described in detail in the Doctrine DBAL configuration
documentation.

Services
db: The database connection, instance of Doctrine\DBAL\Connection.
db.config:
Configuration
object
for
Doctrine.
Defaults
Doctrine\DBAL\Configuration.

to

an

empty

1. http://www.doctrine-project.org/projects/dbal

PDF brought to you by

generated on November 18, 2015

Chapter 19: DoctrineServiceProvider | 57

 db.event_manager: Event Manager for Doctrine.

Registering
Listing 19-1

1 $app->register(new Silex\Provider\DoctrineServiceProvider(), array(

2
'db.options' => array(
3
'driver'
=> 'pdo_sqlite',
4
'path'
=> __DIR__.'/app.db',
5
),
6 ));

Doctrine DBAL comes with the "fat" Silex archive but not with the regular one. If you are using
Composer, add it as a dependency:
Listing 19-2

1 composer require "doctrine/dbal:~2.2"

Usage
The Doctrine provider provides a db service. Here is a usage example:
Listing 19-3

1 $app->get('/blog/{id}', function ($id) use ($app) {

2
$sql = "SELECT * FROM posts WHERE id = ?";
3
$post = $app['db']->fetchAssoc($sql, array((int) $id));
4
5
return "<h1>{$post['title']}</h1>".
6
"<p>{$post['body']}</p>";
7 });

Using multiple databases

The Doctrine provider can allow access to multiple databases. In order to configure the data sources,
replace the db.options with dbs.options. dbs.options is an array of configurations where keys are
connection names and values are options:
Listing 19-4

1 $app->register(new Silex\Provider\DoctrineServiceProvider(), array(

2
'dbs.options' => array (
3
'mysql_read' => array(
4
'driver'
=> 'pdo_mysql',
5
'host'
=> 'mysql_read.someplace.tld',
6
'dbname'
=> 'my_database',
7
'user'
=> 'my_username',
8
'password' => 'my_password',
9
'charset'
=> 'utf8mb4',
10
),
11
'mysql_write' => array(
12
'driver'
=> 'pdo_mysql',
13
'host'
=> 'mysql_write.someplace.tld',

PDF brought to you by

generated on November 18, 2015

Chapter 19: DoctrineServiceProvider | 58

14
15
16
17
18
19
),
20 ));

'dbname'
'user'
'password'
'charset'

=>
=>
=>
=>

'my_database',
'my_username',
'my_password',
'utf8mb4',

),

The first registered connection is the default and can simply be accessed as you would if there was only
one connection. Given the above configuration, these two lines are equivalent:
Listing 19-5

1 $app['db']->fetchAll('SELECT * FROM table');

2
3 $app['dbs']['mysql_read']->fetchAll('SELECT * FROM table');

Using multiple connections:

Listing 19-6

1 $app->get('/blog/{id}', function ($id) use ($app) {

2
$sql = "SELECT * FROM posts WHERE id = ?";
3
$post = $app['dbs']['mysql_read']->fetchAssoc($sql, array((int) $id));
4
5
$sql = "UPDATE posts SET value = ? WHERE id = ?";
6
$app['dbs']['mysql_write']->executeUpdate($sql, array('newValue', (int) $id));
7
8
return "<h1>{$post['title']}</h1>".
9
"<p>{$post['body']}</p>";
10 });

For more information, consult the Doctrine DBAL documentation2.

2. http://docs.doctrine-project.org/projects/doctrine-dbal/en/latest/

PDF brought to you by

generated on November 18, 2015

Chapter 19: DoctrineServiceProvider | 59

Chapter 20

MonologServiceProvider
The MonologServiceProvider provides a default logging mechanism through Jordi Boggiano's Monolog1
library.
It will log requests and errors and allow you to add logging to your application. This allows you to debug
and monitor the behaviour, even in production.

Parameters
monolog.logfile: File where logs are written to.
monolog.bubble: (optional) Whether the messages that are handled can bubble up the stack
or not.
monolog.permission: (optional) File permissions default (null), nothing change.
monolog.level (optional): Level of logging, defaults to DEBUG. Must be one of Logger::DEBUG,
Logger::INFO, Logger::WARNING, Logger::ERROR. DEBUG will log everything, INFO will log
everything except DEBUG, etc.
In addition to the Logger:: constants, it is also possible to supply the level in string form, for
example: "DEBUG", "INFO", "WARNING", "ERROR".
monolog.name (optional): Name of the monolog channel, defaults to myapp.

Services
monolog: The monolog logger instance.
Example usage:
Listing 20-1

1 $app['monolog']->addDebug('Testing the Monolog logging.');

monolog.listener: An event listener to log requests, responses and errors.

1. https://github.com/Seldaek/monolog

PDF brought to you by

generated on November 18, 2015

Chapter 20: MonologServiceProvider | 60

Registering
Listing 20-2

1 $app->register(new Silex\Provider\MonologServiceProvider(), array(

2
'monolog.logfile' => __DIR__.'/development.log',
3 ));

Monolog comes with the "fat" Silex archive but not with the regular one. If you are using
Composer, add it as a dependency:
Listing 20-3

1 composer require monolog/monolog

Usage
The MonologServiceProvider provides a monolog service. You can use it to add log entries for any logging
level through addDebug(), addInfo(), addWarning() and addError():
Listing 20-4

1 use Symfony\Component\HttpFoundation\Response;
2
3 $app->post('/user', function () use ($app) {
4
// ...
5
6
$app['monolog']->addInfo(sprintf("User '%s' registered.", $username));
7
8
return new Response('', 201);
9 });

Customization
You can configure Monolog (like adding or changing the handlers) before using it by extending the
monolog service:
Listing 20-5

1 $app['monolog'] = $app->share($app->extend('monolog', function($monolog, $app) {

2
$monolog->pushHandler(...);
3
4
return $monolog;
5 }));

By default, all requests, responses and errors are logged by an event listener registered as a service called
monolog.listener. You can replace or remove this service if you want to modify or disable the informations
logged.

Traits
Silex\Application\MonologTrait adds the following shortcuts:
log: Logs a message.

PDF brought to you by

generated on November 18, 2015

Chapter 20: MonologServiceProvider | 61

Listing 20-6

1 $app->log(sprintf("User '%s' registered.", $username));

For more information, check out the Monolog documentation2.

2. https://github.com/Seldaek/monolog

PDF brought to you by

generated on November 18, 2015

Chapter 20: MonologServiceProvider | 62

Chapter 21

SessionServiceProvider
The SessionServiceProvider provides a service for storing data persistently between requests.

Parameters
session.storage.save_path (optional): The path for the NativeFileSessionHandler,
defaults to the value of sys_get_temp_dir().
session.storage.options: An array of options that is passed to the constructor of the
session.storage service.
In case of the default NativeSessionStorage1, the most useful options are:

name: The cookie name (_SESS by default)

id: The session id (null by default)
cookie_lifetime: Cookie lifetime
cookie_path: Cookie path
cookie_domain: Cookie domain
cookie_secure: Cookie secure (HTTPS)
cookie_httponly: Whether the cookie is http only

However, all of these are optional. Default Sessions life time is 1800 seconds (30 minutes). To
override this, set the lifetime option.
For a full list of available options, read the PHP2 official documentation.
session.test: Whether to simulate sessions or not (useful when writing functional tests).

Services
session: An instance of Symfony's Session3.
session.storage: A service that is used for persistence of the session data.
1. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Session/Storage/NativeSessionStorage.html
2. http://php.net/session.configuration
3. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Session/Session.html

PDF brought to you by

generated on November 18, 2015

Chapter 21: SessionServiceProvider | 63

 session.storage.handler: A service that is used by the session.storage for data access.

Defaults to a NativeFileSessionHandler4 storage handler.

Registering
Listing 21-1

1 $app->register(new Silex\Provider\SessionServiceProvider());

Usage
The Session provider provides a session service. Here is an example that authenticates a user and creates
a session for them:
Listing 21-2

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

use Symfony\Component\HttpFoundation\Response;
$app->get('/login', function () use ($app) {
$username = $app['request']->server->get('PHP_AUTH_USER', false);
$password = $app['request']->server->get('PHP_AUTH_PW');
if ('igor' === $username && 'password' === $password) {
$app['session']->set('user', array('username' => $username));
return $app->redirect('/account');
}
$response = new Response();
$response->headers->set('WWW-Authenticate', sprintf('Basic realm="%s"', 'site_login'));
$response->setStatusCode(401, 'Please sign in.');
return $response;
});
$app->get('/account', function () use ($app) {
if (null === $user = $app['session']->get('user')) {
return $app->redirect('/login');
}
return "Welcome {$user['username']}!";
});

Custom Session Configurations

If your system is using a custom session configuration (such as a redis handler from a PHP extension)
then you need to disable the NativeFileSessionHandler by setting session.storage.handler to null.
You will have to configure the session.save_path ini setting yourself in that case.
Listing 21-3

1 $app['session.storage.handler'] = null;

4. http://api.symfony.com/master/Symfony/Component/HttpFoundation/Session/Storage/Handler/NativeFileSessionHandler.html

PDF brought to you by

generated on November 18, 2015

Chapter 21: SessionServiceProvider | 64

Chapter 22

SwiftmailerServiceProvider
The SwiftmailerServiceProvider provides a service for sending email through the Swift Mailer1 library.
You can use the mailer service to send messages easily. By default, it will attempt to send emails through
SMTP.

Parameters
swiftmailer.use_spool: A boolean to specify whether or not to use the memory spool,
defaults to true.
swiftmailer.options: An array of options for the default SMTP-based configuration.
The following options can be set:

host: SMTP hostname, defaults to 'localhost'.

port: SMTP port, defaults to 25.
username: SMTP username, defaults to an empty string.
password: SMTP password, defaults to an empty string.
encryption: SMTP encryption, defaults to null. Valid values are 'tls', 'ssl', or null
(indicating no encryption).
auth_mode: SMTP authentication mode, defaults to null. Valid values are 'plain',
'login', 'cram-md5', or null.
Example usage:
Listing 22-1

1 $app['swiftmailer.options'] = array(
2
'host' => 'host',
3
'port' => '25',
4
'username' => 'username',
5
'password' => 'password',
6
'encryption' => null,
7
'auth_mode' => null
8 );

1. http://swiftmailer.org

PDF brought to you by

generated on November 18, 2015

Chapter 22: SwiftmailerServiceProvider | 65

Services
mailer: The mailer instance.
Example usage:
Listing 22-2

1 $message = \Swift_Message::newInstance();
2
3 // ...
4
5 $app['mailer']->send($message);

swiftmailer.transport: The transport

Swift_Transport_EsmtpTransport.

used

for

e-mail

delivery.

Defaults

to

swiftmailer.transport.buffer: StreamBuffer used by the transport.

swiftmailer.transport.authhandler: Authentication handler used by the transport. Will try
the following by default: CRAM-MD5, login, plaintext.
swiftmailer.transport.eventdispatcher: Internal event dispatcher used by Swiftmailer.

Registering
Listing 22-3

1 $app->register(new Silex\Provider\SwiftmailerServiceProvider());

SwiftMailer comes with the "fat" Silex archive but not with the regular one. If you are using
Composer, add it as a dependency:
Listing 22-4

1 composer require swiftmailer/swiftmailer

Usage
The Swiftmailer provider provides a mailer service:
Listing 22-5

1 $app->post('/feedback', function () use ($app) {

2
$request = $app['request'];
3
4
$message = \Swift_Message::newInstance()
5
->setSubject('[YourSite] Feedback')
6
->setFrom(array('[email protected]'))
7
->setTo(array('[email protected]'))
8
->setBody($request->get('message'));
9
10
$app['mailer']->send($message);
11
12
return new Response('Thank you for your feedback!', 201);
13 });

PDF brought to you by

generated on November 18, 2015

Chapter 22: SwiftmailerServiceProvider | 66

Usage in commands
By default, the Swiftmailer provider sends the emails using the KernelEvents::TERMINATE event, which
is fired after the response has been sent. However, as this event isn't fired for console commands, your
emails won't be sent.
For that reason, if you send emails using a command console, it is recommended that you disable the use
of the memory spool (before accessing $app['mailer']):
Listing 22-6

1 $app['swiftmailer.use_spool'] = false;

Alternatively, you can just make sure to flush the message spool by hand before ending the command
execution. To do so, use the following code:
Listing 22-7

1 $app['swiftmailer.spooltransport']
2
->getSpool()
3
->flushQueue($app['swiftmailer.transport'])
4 ;

Traits
Silex\Application\SwiftmailerTrait adds the following shortcuts:
mail: Sends an email.
Listing 22-8

1 $app->mail(\Swift_Message::newInstance()
2
->setSubject('[YourSite] Feedback')
3
->setFrom(array('[email protected]'))
4
->setTo(array('[email protected]'))
5
->setBody($request->get('message')));

For more information, check out the Swift Mailer documentation2.

2. http://swiftmailer.org

PDF brought to you by

generated on November 18, 2015

Chapter 22: SwiftmailerServiceProvider | 67

Chapter 23

TranslationServiceProvider
The TranslationServiceProvider provides a service for translating your application into different
languages.

Parameters
translator.domains (optional): A mapping of domains/locales/messages. This parameter
contains the translation data for all languages and domains.
locale (optional): The locale for the translator. You will most likely want to set this based on
some request parameter. Defaults to en.
locale_fallbacks (optional): Fallback locales for the translator. It will be used when the
current locale has no messages set. Defaults to en.

Services
translator: An instance of Translator1, that is used for translation.
translator.loader: An instance of an implementation of the translation LoaderInterface2,
defaults to an ArrayLoader3.
translator.message_selector: An instance of MessageSelector4.

Registering
Listing 23-1

1. http://api.symfony.com/master/Symfony/Component/Translation/Translator.html
2. http://api.symfony.com/master/Symfony/Component/Translation/Loader/LoaderInterface.html
3. http://api.symfony.com/master/Symfony/Component/Translation/Loader/ArrayLoader.html
4. http://api.symfony.com/master/Symfony/Component/Translation/MessageSelector.html

PDF brought to you by

generated on November 18, 2015

Chapter 23: TranslationServiceProvider | 68

1 $app->register(new Silex\Provider\TranslationServiceProvider(), array(

2
'locale_fallbacks' => array('en'),
3 ));

The Symfony Translation Component comes with the "fat" Silex archive but not with the regular
one. If you are using Composer, add it as a dependency:
Listing 23-2

1 composer require symfony/translation

Usage
The Translation provider provides a translator service and makes use of the translator.domains
parameter:
Listing 23-3

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

$app['translator.domains'] = array(
'messages' => array(
'en' => array(
'hello'
=> 'Hello %name%',
'goodbye'
=> 'Goodbye %name%',
),
'de' => array(
'hello'
=> 'Hallo %name%',
'goodbye'
=> 'Tschss %name%',
),
'fr' => array(
'hello'
=> 'Bonjour %name%',
'goodbye'
=> 'Au revoir %name%',
),
),
'validators' => array(
'fr' => array(
'This value should be a valid number.' => 'Cette valeur doit tre un nombre.',
),
),
);
$app->get('/{_locale}/{message}/{name}', function ($message, $name) use ($app) {
return $app['translator']->trans($message, array('%name%' => $name));
});

The above example will result in following routes:

/en/hello/igor will return Hello igor.

/de/hello/igor will return Hallo igor.
/fr/hello/igor will return Bonjour igor.
/it/hello/igor will return Hello igor (because of the fallback).

Using Resources
When translations are stored in a file, you can load them as follows:

PDF brought to you by

generated on November 18, 2015

Chapter 23: TranslationServiceProvider | 69

Listing 23-4

1
2
3
4
5
6
7
8
9
10

$app = new Application();

$app->register(new TranslationServiceProvider());
$app->extend('translator.resources', function ($resources, $app) {
$resources = array_merge($resources, array(
array('array', array('This value should be a valid number.' => 'Cette valeur doit
tre un nombre.'), 'fr', 'validators'),
));
return $resources;
});

Traits
Silex\Application\TranslationTrait adds the following shortcuts:
trans: Translates the given message.
transChoice: Translates the given choice message by choosing a translation according to a
number.
Listing 23-5

1 $app->trans('Hello World');
2
3 $app->transChoice('Hello World');

Recipes
YAML-based language files
Having your translations in PHP files can be inconvenient. This recipe will show you how to load
translations from external YAML files.
First, add the Symfony Config and Yaml components as dependencies:
Listing 23-6

1 composer require symfony/config symfony/yaml

Next, you have to create the language mappings in YAML files. A naming you can use is locales/
en.yml. Just do the mapping in this file as follows:
Listing 23-7

1 hello: Hello %name%

2 goodbye: Goodbye %name%

Then, register the YamlFileLoader on the translator and add all your translation files:
Listing 23-8

1 use Symfony\Component\Translation\Loader\YamlFileLoader;
2
3 $app['translator'] = $app->share($app->extend('translator', function($translator, $app) {
4
$translator->addLoader('yaml', new YamlFileLoader());
5
6
$translator->addResource('yaml', __DIR__.'/locales/en.yml', 'en');
7
$translator->addResource('yaml', __DIR__.'/locales/de.yml', 'de');

PDF brought to you by

generated on November 18, 2015

Chapter 23: TranslationServiceProvider | 70

8
$translator->addResource('yaml', __DIR__.'/locales/fr.yml', 'fr');
9
10
return $translator;
11 }));

XLIFF-based language files

Just as you would do with YAML translation files, you first need to add the Symfony Config component
as a dependency (see above for details).
Then, similarly, create XLIFF files in your locales directory and add them to the translator:
Listing 23-9

1 $translator->addResource('xliff', __DIR__.'/locales/en.xlf', 'en');

2 $translator->addResource('xliff', __DIR__.'/locales/de.xlf', 'de');
3 $translator->addResource('xliff', __DIR__.'/locales/fr.xlf', 'fr');

The XLIFF loader is already pre-configured by the extension.

Accessing translations in Twig templates

Once loaded, the translation service provider is available from within Twig templates:
Listing 23-10

1 {{ app.translator.trans('translation_key') }}

Moreover, when using the Twig bridge provided by Symfony (see TwigServiceProvider), you will be
allowed to translate strings in the Twig way:
Listing 23-11

1 {{ 'translation_key'|trans }}
2 {{ 'translation_key'|transchoice }}
3 {% trans %}translation_key{% endtrans %}

PDF brought to you by

generated on November 18, 2015

Chapter 23: TranslationServiceProvider | 71

Chapter 24

TwigServiceProvider
The TwigServiceProvider provides integration with the Twig1 template engine.

Parameters
twig.path (optional): Path to the directory containing twig template files (it can also be an
array of paths).
twig.templates (optional): An associative array of template names to template contents. Use
this if you want to define your templates inline.
twig.options (optional): An associative array of twig options. Check out the twig
documentation2 for more information.
twig.form.templates (optional): An array of templates used to render forms (only available
when the FormServiceProvider is enabled).

Services
twig: The Twig_Environment instance. The main way of interacting with Twig.
twig.loader: The loader for Twig templates which uses the twig.path and the
twig.templates options. You can also replace the loader completely.

Registering
Listing 24-1

1 $app->register(new Silex\Provider\TwigServiceProvider(), array(

2
'twig.path' => __DIR__.'/views',
3 ));

1. http://twig.sensiolabs.org/
2. http://twig.sensiolabs.org/doc/api.html#environment-options

PDF brought to you by

generated on November 18, 2015

Chapter 24: TwigServiceProvider | 72

Twig comes with the "fat" Silex archive but not with the regular one. If you are using Composer,
add it as a dependency:
Listing 24-2

1 composer require twig/twig

Symfony Components Integration

Symfony provides a Twig bridge that provides additional integration between some Symfony components
and Twig. Add it as a dependency:
Listing 24-3

1 composer require symfony/twig-bridge

When present, the TwigServiceProvider will provide you with the following additional capabilities:
UrlGeneratorServiceProvider: If you are using the UrlGeneratorServiceProvider, you
will have access to the path() and url() functions. You can find more information in the
Symfony Routing documentation.
TranslationServiceProvider: If you are using the TranslationServiceProvider, you will
get the trans() and transchoice() functions for translation in Twig templates. You can find
more information in the Symfony Translation documentation3.
FormServiceProvider: If you are using the FormServiceProvider, you will get a set of
helpers for working with forms in templates. You can find more information in the Symfony
Forms reference4.
SecurityServiceProvider: If you are using the SecurityServiceProvider, you will have
access to the is_granted() function in templates. You can find more information in the
Symfony Security documentation.

Usage
The Twig provider provides a twig service:
Listing 24-4

1 $app->get('/hello/{name}', function ($name) use ($app) {

2
return $app['twig']->render('hello.twig', array(
3
'name' => $name,
4
));
5 });

This will render a file named views/hello.twig.

In any Twig template, the app variable refers to the Application object. So you can access any service from
within your view. For example to access $app['request']->getHost(), just put this in your template:
Listing 24-5

1 {{ app.request.host }}

A render function is also registered to help you render another controller from a template:
Listing 24-6

3. http://symfony.com/doc/current/book/translation.html#twig-templates
4. http://symfony.com/doc/current/reference/forms/twig_reference.html

PDF brought to you by

generated on November 18, 2015

Chapter 24: TwigServiceProvider | 73

1 {{ render(app.request.baseUrl ~ '/sidebar') }}
2
3 {# or if you are also using the UrlGeneratorServiceProvider #}
4 {{ render(url('sidebar')) }}

You must prepend the app.request.baseUrl to render calls to ensure that the render works when
deployed into a sub-directory of the docroot.

Traits
Silex\Application\TwigTrait adds the following shortcuts:
render: Renders a view with the given parameters and returns a Response object.
Listing 24-7

Listing 24-8

1
2
3
4
5
6

return $app->render('index.html', ['name' => 'Fabien']);

$response = new Response();
$response->setTtl(10);
return $app->render('index.html', ['name' => 'Fabien'], $response);

1 // stream a view
2 use Symfony\Component\HttpFoundation\StreamedResponse;
3
4 return $app->render('index.html', ['name' => 'Fabien'], new StreamedResponse());

Customization
You can configure the Twig environment before using it by extending the twig service:
Listing 24-9

1 $app['twig'] = $app->share($app->extend('twig', function($twig, $app) {

2
$twig->addGlobal('pi', 3.14);
3
$twig->addFilter('levenshtein', new \Twig_Filter_Function('levenshtein'));
4
5
return $twig;
6 }));

For more information, check out the official Twig documentation5.

5. http://twig.sensiolabs.org

PDF brought to you by

generated on November 18, 2015

Chapter 24: TwigServiceProvider | 74

Chapter 25

UrlGeneratorServiceProvider
The UrlGeneratorServiceProvider provides a service for generating URLs for named routes.

Parameters
None.

Services
url_generator: An instance of UrlGenerator1, using the RouteCollection2 that is provided
through the routes service. It has a generate method, which takes the route name as an
argument, followed by an array of route parameters.

Registering
Listing 25-1

1 $app->register(new Silex\Provider\UrlGeneratorServiceProvider());

Usage
The UrlGenerator provider provides a url_generator service:
Listing 25-2

1 $app->get('/', function () {
2
return 'welcome to the homepage';
3 })

1. http://api.symfony.com/master/Symfony/Component/Routing/Generator/UrlGenerator.html
2. http://api.symfony.com/master/Symfony/Component/Routing/RouteCollection.html

PDF brought to you by

generated on November 18, 2015

Chapter 25: UrlGeneratorServiceProvider | 75

4
5
6
7
8
9
10
11
12
13
14
15

->bind('homepage');
$app->get('/hello/{name}', function ($name) {
return "Hello $name!";
})
->bind('hello');
$app->get('/navigation', function () use ($app) {
return '<a href="'.$app['url_generator']->generate('homepage').'">Home</a>'.
' | '.
'<a href="'.$app['url_generator']->generate('hello', array('name' =>
'Igor')).'">Hello Igor</a>';
});

When using Twig, the service can be used like this:

Listing 25-3

1 {{ app.url_generator.generate('homepage') }}

Moreover, if you have twig-bridge as a Composer dep, you will have access to the path() and url()
functions:
Listing 25-4

1
2
3
4

{{ path('homepage') }}
{{ url('homepage') }} {# generates the absolute url http://example.org/ #}
{{ path('hello', {name: 'Fabien'}) }}
{{ url('hello', {name: 'Fabien'}) }} {# generates the absolute url http://example.org/hello/
Fabien #}

Traits
Silex\Application\UrlGeneratorTrait adds the following shortcuts:
path: Generates a path.
url: Generates an absolute URL.
Listing 25-5

1 $app->path('homepage');
2 $app->url('homepage');

PDF brought to you by

generated on November 18, 2015

Chapter 25: UrlGeneratorServiceProvider | 76

Chapter 26

ValidatorServiceProvider
The ValidatorServiceProvider provides a service for validating data. It is most useful when used with the
FormServiceProvider, but can also be used standalone.

Parameters
validator.validator_service_ids: An array of service names representing validators.

Services
validator: An instance of Validator1.
validator.mapping.class_metadata_factory: Factory for metadata loaders, which can read
validation constraint information from classes. Defaults to StaticMethodLoader-ClassMetadataFactory.
This means you can define a static loadValidatorMetadata method on your data class, which
takes a ClassMetadata argument. Then you can set constraints on this ClassMetadata instance.

Registering
Listing 26-1

1 $app->register(new Silex\Provider\ValidatorServiceProvider());

1. http://api.symfony.com/master/Symfony/Component/Validator/ValidatorInterface.html

PDF brought to you by

generated on November 18, 2015

Chapter 26: ValidatorServiceProvider | 77

The Symfony Validator Component comes with the "fat" Silex archive but not with the regular one.
If you are using Composer, add it as a dependency:
Listing 26-2

1 composer require symfony/validator

Usage
The Validator provider provides a validator service.

Validating Values
You can validate values directly using the validateValue validator method:
Listing 26-3

1 use Symfony\Component\Validator\Constraints as Assert;

2
3 $app->get('/validate/{email}', function ($email) use ($app) {
4
$errors = $app['validator']->validateValue($email, new Assert\Email());
5
6
if (count($errors) > 0) {
7
return (string) $errors;
8
} else {
9
return 'The email is valid';
10
}
11 });

Validating Associative Arrays

Validating associative arrays is like validating simple values, with a collection of constraints:
Listing 26-4

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

use Symfony\Component\Validator\Constraints as Assert;

class Book
{
public $title;
public $author;
}
class Author
{
public $first_name;
public $last_name;
}
$book = array(
'title' => 'My Book',
'author' => array(
'first_name' => 'Fabien',
'last_name' => 'Potencier',
),
);
$constraint = new Assert\Collection(array(

PDF brought to you by

generated on November 18, 2015

Chapter 26: ValidatorServiceProvider | 78

24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

'title' => new Assert\Length(array('min' => 10)),

'author' => new Assert\Collection(array(
'first_name' => array(new Assert\NotBlank(), new Assert\Length(array('min' =>
10))),
'last_name' => new Assert\Length(array('min' => 10)),
)),
));
$errors = $app['validator']->validateValue($book, $constraint);
if (count($errors) > 0) {
foreach ($errors as $error) {
echo $error->getPropertyPath().' '.$error->getMessage()."\n";
}
} else {
echo 'The book is valid';
}

Validating Objects
If you want to add validations to a class, you can define the constraint for the class properties and getters,
and then call the validate method:
Listing 26-5

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

use Symfony\Component\Validator\Constraints as Assert;

$author = new Author();
$author->first_name = 'Fabien';
$author->last_name = 'Potencier';
$book = new Book();
$book->title = 'My Book';
$book->author = $author;
$metadata = $app['validator.mapping.class_metadata_factory']->getMetadataFor('Author');
$metadata->addPropertyConstraint('first_name', new Assert\NotBlank());
$metadata->addPropertyConstraint('first_name', new Assert\Length(array('min' => 10)));
$metadata->addPropertyConstraint('last_name', new Assert\Length(array('min' => 10)));
$metadata = $app['validator.mapping.class_metadata_factory']->getMetadataFor('Book');
$metadata->addPropertyConstraint('title', new Assert\Length(array('min' => 10)));
$metadata->addPropertyConstraint('author', new Assert\Valid());
$errors = $app['validator']->validate($book);
if (count($errors) > 0) {
foreach ($errors as $error) {
echo $error->getPropertyPath().' '.$error->getMessage()."\n";
}
} else {
echo 'The author is valid';
}

You can also declare the class constraint by adding a static loadValidatorMetadata method to your
classes:
Listing 26-6

1 use Symfony\Component\Validator\Mapping\ClassMetadata;
2 use Symfony\Component\Validator\Constraints as Assert;

PDF brought to you by

generated on November 18, 2015

Chapter 26: ValidatorServiceProvider | 79

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47

class Book
{
public $title;
public $author;
static public function loadValidatorMetadata(ClassMetadata $metadata)
{
$metadata->addPropertyConstraint('title', new Assert\Length(array('min' => 10)));
$metadata->addPropertyConstraint('author', new Assert\Valid());
}
}
class Author
{
public $first_name;
public $last_name;
static public function loadValidatorMetadata(ClassMetadata $metadata)
{
$metadata->addPropertyConstraint('first_name', new Assert\NotBlank());
$metadata->addPropertyConstraint('first_name', new Assert\Length(array('min' =>
10)));
$metadata->addPropertyConstraint('last_name', new Assert\Length(array('min' =>
10)));
}
}
$app->get('/validate/{email}', function ($email) use ($app) {
$author = new Author();
$author->first_name = 'Fabien';
$author->last_name = 'Potencier';
$book = new Book();
$book->title = 'My Book';
$book->author = $author;
$errors = $app['validator']->validate($book);
if (count($errors) > 0) {
foreach ($errors as $error) {
echo $error->getPropertyPath().' '.$error->getMessage()."\n";
}
} else {
echo 'The author is valid';
}
});

Use addGetterConstraint() to add constraints on getter methods and addConstraint() to add

constraints on the class itself.

Translation
To be able to translate the error messages, you can use the translator provider and register the messages
under the validators domain:

PDF brought to you by

generated on November 18, 2015

Chapter 26: ValidatorServiceProvider | 80

Listing 26-7

1 $app['translator.domains'] = array(
2
'validators' => array(
3
'fr' => array(
4
'This value should be a valid number.' => 'Cette valeur doit tre un nombre.',
5
),
6
),
7 );

For more information, consult the Symfony Validation documentation2.

2. http://symfony.com/doc/master/book/validation.html

PDF brought to you by

generated on November 18, 2015

Chapter 26: ValidatorServiceProvider | 81

Chapter 27

FormServiceProvider
The FormServiceProvider provides a service for building forms in your application with the Symfony
Form component.

Parameters
form.secret: This secret value is used for generating and validating the CSRF token for a
specific page. It is very important for you to set this value to a static randomly generated value,
to prevent hijacking of your forms. Defaults to md5(__DIR__).

Services
form.factory: An instance of FormFactory1, that is used to build a form.
form.csrf_provider: An instance of an implementation of CsrfProviderInterface2 for Symfony
2.3 or CsrfTokenManagerInterface3 for Symfony 2.4+.

Registering
Listing 27-1

1 use Silex\Provider\FormServiceProvider;
2
3 $app->register(new FormServiceProvider());

1. http://api.symfony.com/master/Symfony/Component/Form/FormFactory.html
2. http://api.symfony.com/2.3/Symfony/Component/Form/Extension/Csrf/CsrfProvider/CsrfProviderInterface.html
3. http://api.symfony.com/2.7/Symfony/Component/Security/Csrf/CsrfTokenManagerInterface.html

PDF brought to you by

generated on November 18, 2015

Chapter 27: FormServiceProvider | 82

If you don't want to create your own form layout, it's fine: a default one will be used. But you will
have to register the translation provider as the default form layout requires it.
If you want to use validation with forms, do not forget to register the Validator provider.

The Symfony Form Component and all its dependencies (optional or not) comes with the "fat"
Silex archive but not with the regular one. If you are using Composer, add it as a dependency:
Listing 27-2

1 composer require symfony/form

If you are going to use the validation extension with forms, you must also add a dependency to the
symfony/config and symfony/translation components:
Listing 27-3

1 composer require symfony/validator symfony/config symfony/translation

The Symfony Security CSRF component is used to protect forms against CSRF attacks (as of
Symfony 2.4+):
Listing 27-4

1 composer require symfony/security-csrf

If you want to use forms in your Twig templates, you can also install the Symfony Twig Bridge.
Make sure to install, if you didn't do that already, the Translation component in order for the
bridge to work:
Listing 27-5

1 composer require symfony/twig-bridge symfony/translation

Usage
The FormServiceProvider provides a form.factory service. Here is a usage example:
Listing 27-6

1 $app->match('/form', function (Request $request) use ($app) {

2
// some default data for when the form is displayed the first time
3
$data = array(
4
'name' => 'Your name',
5
'email' => 'Your email',
6
);
7
8
$form = $app['form.factory']->createBuilder('form', $data)
9
->add('name')
10
->add('email')
11
->add('gender', 'choice', array(
12
'choices' => array(1 => 'male', 2 => 'female'),
13
'expanded' => true,
14
))
15
->getForm();
16
17
$form->handleRequest($request);
18
19
if ($form->isValid()) {
20
$data = $form->getData();
21
22
// do something with the data

PDF brought to you by

generated on November 18, 2015

Chapter 27: FormServiceProvider | 83

23
24
// redirect somewhere
25
return $app->redirect('...');
26
}
27
28
// display the form
29
return $app['twig']->render('index.twig', array('form' => $form->createView()));
30 });

And here is the index.twig form template (requires symfony/twig-bridge):

Listing 27-7

1 <form action="#" method="post">

2
{{ form_widget(form) }}
3
4
<input type="submit" name="submit" />
5 </form>

If you are using the validator provider, you can also add validation to your form by adding constraints on
the fields:
Listing 27-8

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

use Symfony\Component\Validator\Constraints as Assert;

$app->register(new Silex\Provider\ValidatorServiceProvider());
$app->register(new Silex\Provider\TranslationServiceProvider(), array(
'translator.domains' => array(),
));
$form = $app['form.factory']->createBuilder('form')
->add('name', 'text', array(
'constraints' => array(new Assert\NotBlank(), new Assert\Length(array('min' => 5)))
))
->add('email', 'text', array(
'constraints' => new Assert\Email()
))
->add('gender', 'choice', array(
'choices' => array(1 => 'male', 2 => 'female'),
'expanded' => true,
'constraints' => new Assert\Choice(array(1, 2)),
))
->getForm();

You can register form types by extending form.types:

Listing 27-9

1 $app['form.types'] = $app->share($app->extend('form.types', function ($types) use ($app) {

2
$types[] = new YourFormType();
3
4
return $types;
5 }));

You can register form extensions by extending form.extensions:

Listing 27-10

1 $app['form.extensions'] = $app->share($app->extend('form.extensions', function

2 ($extensions) use ($app) {
3
$extensions[] = new YourTopFormExtension();
4
5

PDF brought to you by

generated on November 18, 2015

Chapter 27: FormServiceProvider | 84

return $extensions;
}));

You can register form type extensions by extending form.type.extensions:

Listing 27-11

1 $app['form.type.extensions'] = $app->share($app->extend('form.type.extensions', function

2 ($extensions) use ($app) {
3
$extensions[] = new YourFormTypeExtension();
4
5
return $extensions;
}));

You can register form type guessers by extending form.type.guessers:

Listing 27-12

1 $app['form.type.guessers'] = $app->share($app->extend('form.type.guessers', function

2 ($guessers) use ($app) {
3
$guessers[] = new YourFormTypeGuesser();
4
5
return $guessers;
}));

Traits
Silex\Application\FormTrait adds the following shortcuts:
form: Creates a FormBuilder instance.
Listing 27-13

1 $app->form($data);

For more information, consult the Symfony Forms documentation4.

4. http://symfony.com/doc/2.3/book/forms.html

PDF brought to you by

generated on November 18, 2015

Chapter 27: FormServiceProvider | 85

Chapter 28

HttpCacheServiceProvider
The HttpCacheServiceProvider provides support for the Symfony Reverse Proxy.

Parameters
http_cache.cache_dir: The cache directory to store the HTTP cache data.
http_cache.options (optional): An array of options for the HttpCache1 constructor.

Services
http_cache: An instance of HttpCache2.
http_cache.esi: An instance of Esi3, that implements the ESI capabilities to Request and
Response instances.
http_cache.store: An instance of Store4, that implements all the logic for storing cache
metadata (Request and Response headers).

Registering
Listing 28-1

1 $app->register(new Silex\Provider\HttpCacheServiceProvider(), array(

2
'http_cache.cache_dir' => __DIR__.'/cache/',
3 ));

1. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpCache/HttpCache.html
2. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpCache/HttpCache.html
3. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpCache/Esi.html
4. http://api.symfony.com/master/Symfony/Component/HttpKernel/HttpCache/Store.html

PDF brought to you by

generated on November 18, 2015

Chapter 28: HttpCacheServiceProvider | 86

Usage
Silex already supports any reverse proxy like Varnish out of the box by setting Response HTTP cache
headers:
Listing 28-2

1 use Symfony\Component\HttpFoundation\Response;
2
3 $app->get('/', function() {
4
return new Response('Foo', 200, array(
5
'Cache-Control' => 's-maxage=5',
6
));
7 });

If you want Silex to trust the X-Forwarded-For* headers from your reverse proxy at address $ip,
you will need to whitelist it as documented in Trusting Proxies5.
If you would be running Varnish in front of your application on the same machine:
Listing 28-3

1 use Symfony\Component\HttpFoundation\Request;
2
3 Request::setTrustedProxies(array('127.0.0.1', '::1'));
4 $app->run();

This provider allows you to use the Symfony reverse proxy natively with Silex applications by using the
http_cache service. The Symfony reverse proxy acts much like any other proxy would, so you will want
to whitelist it:
Listing 28-4

1 use Symfony\Component\HttpFoundation\Request;
2
3 Request::setTrustedProxies(array('127.0.0.1'));
4 $app['http_cache']->run();

The provider also provides ESI support:

Listing 28-5

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

$app->get('/', function() {
$response = new Response(<<<EOF
<html>
<body>
Hello
<esi:include src="/included" />
</body>
</html>
EOF
, 200, array(
'Surrogate-Control' => 'content="ESI/1.0"',
));
$response->setTtl(20);
return $response;
});

5. http://symfony.com/doc/current/components/http_foundation/trusting_proxies.html

PDF brought to you by

generated on November 18, 2015

Chapter 28: HttpCacheServiceProvider | 87

20 $app->get('/included', function() {
21
$response = new Response('Foo');
22
$response->setTtl(5);
23
24
return $response;
25 });
26
27 $app['http_cache']->run();

If your application doesn't use ESI, you can disable it to slightly improve the overall performance:
Listing 28-6

1 $app->register(new Silex\Provider\HttpCacheServiceProvider(), array(

2
'http_cache.cache_dir' => __DIR__.'/cache/',
3
'http_cache.esi'
=> null,
4 ));

To help you debug caching issues, set your application debug to true. Symfony automatically adds
a X-Symfony-Cache header to each response with useful information about cache hits and misses.
If you are not using the Symfony Session provider, you might want to set the PHP
session.cache_limiter setting to an empty value to avoid the default PHP behavior.
Finally, check that your Web server does not override your caching strategy.

For more information, consult the Symfony HTTP Cache documentation6.

6. http://symfony.com/doc/current/book/http_cache.html

PDF brought to you by

generated on November 18, 2015

Chapter 28: HttpCacheServiceProvider | 88

Chapter 29

HttpFragmentServiceProvider
The HttpFragmentServiceProvider provides support for the Symfony fragment sub-framework, which
allows you to embed fragments of HTML in a template.
This service provider only work with Symfony 2.4+.

Parameters
fragment.path: The path to use for the URL generated for ESI and HInclude URLs
(/_fragment by default).
uri_signer.secret: The secret to use for the URI signer service (used for the HInclude
renderer).
fragment.renderers.hinclude.global_template: The content or Twig template to use for the
default content when using the HInclude renderer.

Services
fragment.handler: An instance of FragmentHandler1.
fragment.renderers: An array of fragment renderers (by default, the inline, ESI, and HInclude
renderers are pre-configured).

Registering
Listing 29-1

1 $app->register(new Silex\Provider\HttpFragmentServiceProvider());

1. http://api.symfony.com/master/Symfony/Component/HttpKernel/Fragment/FragmentHandler.html

PDF brought to you by

generated on November 18, 2015

Chapter 29: HttpFragmentServiceProvider | 89

Usage
This section assumes that you are using Twig for your templates.

Instead of building a page out of a single request/controller/template, the fragment framework allows
you to build a page from several controllers/sub-requests/sub-templates by using fragments.
Including "sub-pages" in the main page can be done with the Twig render() function:
Listing 29-2

1 The main page content.

2
3 {{ render('/foo') }}
4
5 The main page content resumes here.

The render() call is replaced by the content of the /foo URL (internally, a sub-request is handled by
Silex to render the sub-page).
Instead of making internal sub-requests, you can also use the ESI (the sub-request is handled by a reverse
proxy) or the HInclude strategies (the sub-request is handled by a web browser):
Listing 29-3

1 {{ render(url('route_name')) }}
2
3 {{ render_esi(url('route_name')) }}
4
5 {{ render_hinclude(url('route_name')) }}

PDF brought to you by

generated on November 18, 2015

Chapter 29: HttpFragmentServiceProvider | 90

Chapter 30

SecurityServiceProvider
The SecurityServiceProvider manages authentication and authorization for your applications.

Parameters
security.hide_user_not_found (optional): Defines whether to hide user not found exception
or not. Defaults to true.

Services
security: The main entry point for the security provider. Use it to get the current user token
(only for Symfony up to 2.5).
security.token_storage: Gives access to the user token (Symfony 2.6+).
security.authorization_checker: Allows to check authorizations for the users (Symfony
2.6+).
security.authentication_manager: An instance of AuthenticationProviderManager1,
responsible for authentication.
security.access_manager: An instance of AccessDecisionManager2, responsible for
authorization.
security.session_strategy: Define the session strategy used for authentication (default to a
migration strategy).
security.user_checker: Checks user flags after authentication.
security.last_error: Returns the last authentication errors when given a Request object.
security.encoder_factory: Defines the encoding strategies for user passwords (default to use
a digest algorithm for all users).
security.encoder.digest: The encoder to use by default for all users.
user: Returns the current user

1. http://api.symfony.com/master/Symfony/Component/Security/Core/Authentication/AuthenticationProviderManager.html
2. http://api.symfony.com/master/Symfony/Component/Security/Core/Authorization/AccessDecisionManager.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 91

The service provider defines many other services that are used internally but rarely need to be
customized.

Registering
Listing 30-1

1 $app->register(new Silex\Provider\SecurityServiceProvider(), array(

2
'security.firewalls' => // see below
3 ));

The Symfony Security Component comes with the "fat" Silex archive but not with the regular one.
If you are using Composer, add it as a dependency:
Listing 30-2

1 composer require symfony/security

The security features are only available after the Application has been booted. So, if you want to
use it outside of the handling of a request, don't forget to call boot() first:
Listing 30-3

1 $app->boot();

If you're using a form to authenticate users, you need to enable SessionServiceProvider.

Usage
The Symfony Security component is powerful. To learn more about it, read the Symfony Security
documentation3.
When a security configuration does not behave as expected, enable logging (with the Monolog
extension for instance) as the Security Component logs a lot of interesting information about what
it does and why.

Below is a list of recipes that cover some common use cases.

Accessing the current User

The current user information is stored in a token that is accessible via the security service:
Listing 30-4

3. http://symfony.com/doc/2.3/book/security.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 92

1
2
3
4
5

// Symfony 2.6+
$token = $app['security.token_storage']->getToken();
// Symfony 2.3/2.5
$token = $app['security']->getToken();

If there is no information about the user, the token is null. If the user is known, you can get it with a call
to getUser():
Listing 30-5

1 if (null !== $token) {

2
$user = $token->getUser();
3 }

The user can be a string, an object with a __toString() method, or an instance of UserInterface4.

Securing a Path with HTTP Authentication

The following configuration uses HTTP basic authentication to secure URLs under /admin/:
Listing 30-6

1 $app['security.firewalls'] = array(
2
'admin' => array(
3
'pattern' => '^/admin',
4
'http' => true,
5
'users' => array(
6
// raw password is foo
7
'admin' => array('ROLE_ADMIN',
8 '5FZ2Z8QIkA7UTZ4BYkoC+GsReLf569mSKDsfods6LYQ8t+a8EW9oaircfMpmaLbPBh4FOBiiFyLfuZmTSUwzZg=='),
9
),
10
),
);

The pattern is a regular expression on the URL path; the http setting tells the security layer to use HTTP
basic authentication and the users entry defines valid users.
If you want to restrict the firewall by more than the URL pattern (like the HTTP method, the client IP,
the hostname, or any Request attributes), use an instance of a RequestMatcher5 for the pattern option:
Listing 30-7

1 use Symfony/Component/HttpFoundation/RequestMatcher;
2
3 $app['security.firewalls'] = array(
4
'admin' => array(
5
'pattern' => new RequestMatcher('^/admin', 'example.com', 'POST'),
6
// ...
7
),
8 );

Each user is defined with the following information:

The role or an array of roles for the user (roles are strings beginning with ROLE_ and ending
with anything you want);
The user encoded password.

4. http://api.symfony.com/master/Symfony/Component/Security/Core/User/UserInterface.html
5. http://api.symfony.com/master/Symfony/Component/HttpFoundation/RequestMatcher.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 93

All users must at least have one role associated with them.

The default configuration of the extension enforces encoded passwords. To generate a valid encoded
password from a raw password, use the security.encoder_factory service:
Listing 30-8

1
2
3
4
5

// find the encoder for a UserInterface instance

$encoder = $app['security.encoder_factory']->getEncoder($user);
// compute the encoded password for foo
$password = $encoder->encodePassword('foo', $user->getSalt());

When the user is authenticated, the user stored in the token is an instance of User6
If you are using php-cgi under Apache, you need to add this configuration to make things work
correctly:
Listing 30-9

1
2
3
4
5

RewriteEngine On
RewriteCond %{HTTP:Authorization} ^(.+)$
RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ app.php [QSA,L]

Securing a Path with a Form

Using a form to authenticate users is very similar to the above configuration. Instead of using the http
setting, use the form one and define these two parameters:
login_path: The login path where the user is redirected when they are accessing a secured area
without being authenticated so that they can enter their credentials;
check_path: The check URL used by Symfony to validate the credentials of the user.
Here is how to secure all URLs under /admin/ with a form:
Listing 30-10

1 $app['security.firewalls'] = array(
2
'admin' => array(
3
'pattern' => '^/admin/',
4
'form' => array('login_path' => '/login', 'check_path' => '/admin/login_check'),
5
'users' => array(
6
'admin' => array('ROLE_ADMIN',
7 '5FZ2Z8QIkA7UTZ4BYkoC+GsReLf569mSKDsfods6LYQ8t+a8EW9oaircfMpmaLbPBh4FOBiiFyLfuZmTSUwzZg=='),
8
),
9
),
);

Always keep in mind the following two golden rules:

The login_path path must always be defined outside the secured area (or if it is in the secured
area, the anonymous authentication mechanism must be enabled -- see below);
The check_path path must always be defined inside the secured area.

6. http://api.symfony.com/master/Symfony/Component/Security/Core/User/User.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 94

For the login form to work, create a controller like the following:
Listing 30-11

1 use Symfony\Component\HttpFoundation\Request;
2
3 $app->get('/login', function(Request $request) use ($app) {
4
return $app['twig']->render('login.html', array(
5
'error'
=> $app['security.last_error']($request),
6
'last_username' => $app['session']->get('_security.last_username'),
7
));
8 });

The error and last_username variables contain the last authentication error and the last username
entered by the user in case of an authentication error.
Create the associated template:
Listing 30-12

1 <form action="{{ path('admin_login_check') }}" method="post">

2
{{ error }}
3
<input type="text" name="_username" value="{{ last_username }}" />
4
<input type="password" name="_password" value="" />
5
<input type="submit" />
6 </form>

The admin_login_check route is automatically defined by Silex and its name is derived from the
check_path value (all / are replaced with _ and the leading / is stripped).

Defining more than one Firewall

You are not limited to define one firewall per project.
Configuring several firewalls is useful when you want to secure different parts of your website with
different authentication strategies or for different users (like using an HTTP basic authentication for the
website API and a form to secure your website administration area).
It's also useful when you want to secure all URLs except the login form:
Listing 30-13

1 $app['security.firewalls'] = array(
2
'login' => array(
3
'pattern' => '^/login$',
4
),
5
'secured' => array(
6
'pattern' => '^.*$',
7
'form' => array('login_path' => '/login', 'check_path' => '/login_check'),
8
'users' => array(
9
'admin' => array('ROLE_ADMIN',
10 '5FZ2Z8QIkA7UTZ4BYkoC+GsReLf569mSKDsfods6LYQ8t+a8EW9oaircfMpmaLbPBh4FOBiiFyLfuZmTSUwzZg=='),
11
),
12
),
);

The order of the firewall configurations is significant as the first one to match wins. The above
configuration first ensures that the /login URL is not secured (no authentication settings), and then it
secures all other URLs.

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 95

You can toggle all registered authentication mechanisms for a particular area on and off with the
security flag:
Listing 30-14

1 $app['security.firewalls'] = array(
2
'api' => array(
3
'pattern' => '^/api',
4
'security' => $app['debug'] ? false : true,
5
'wsse' => true,
6
7
// ...
8
),
9 );

Adding a Logout
When using a form for authentication, you can let users log out if you add the logout setting, where
logout_path must match the main firewall pattern:
Listing 30-15

1 $app['security.firewalls'] = array(
2
'secured' => array(
3
'pattern' => '^/admin/',
4
'form' => array('login_path' => '/login', 'check_path' => '/admin/login_check'),
5
'logout' => array('logout_path' => '/admin/logout', 'invalidate_session' => true),
6
7
// ...
8
),
9 );

A route is automatically generated, based on the configured path (all / are replaced with _ and the leading
/ is stripped):
Listing 30-16

1 <a href="{{ path('admin_logout') }}">Logout</a>

Allowing Anonymous Users

When securing only some parts of your website, the user information are not available in non-secured
areas. To make the user accessible in such areas, enabled the anonymous authentication mechanism:
Listing 30-17

1 $app['security.firewalls'] = array(
2
'unsecured' => array(
3
'anonymous' => true,
4
5
// ...
6
),
7 );

When enabling the anonymous setting, a user will always be accessible from the security context; if the
user is not authenticated, it returns the anon. string.

Checking User Roles

To check if a user is granted some role, use the isGranted() method on the security context:

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 96

Listing 30-18

1
2
3
4
5
6
7
8
9

// Symfony 2.6+
if ($app['security.authorization_checker']->isGranted('ROLE_ADMIN')) {
// ...
}
// Symfony 2.3/2.5
if ($app['security']->isGranted('ROLE_ADMIN')) {
// ...
}

You can check roles in Twig templates too:

Listing 30-19

1 {% if is_granted('ROLE_ADMIN') %}
2
<a href="/secured?_switch_user=fabien">Switch to Fabien</a>
3 {% endif %}

You can check if a user is "fully authenticated" (not an anonymous user for instance) with the special
IS_AUTHENTICATED_FULLY role:
Listing 30-20

1 {% if is_granted('IS_AUTHENTICATED_FULLY') %}
2
<a href="{{ path('logout') }}">Logout</a>
3 {% else %}
4
<a href="{{ path('login') }}">Login</a>
5 {% endif %}

Of course you will need to define a login route for this to work.
Don't use the getRoles() method to check user roles.

isGranted() throws an exception when no authentication information is available (which is the

case on non-secured area).

Impersonating a User
If you want to be able to switch to another user (without knowing the user credentials), enable the
switch_user authentication strategy:
Listing 30-21

1 $app['security.firewalls'] = array(
2
'unsecured' => array(
3
'switch_user' => array('parameter' => '_switch_user', 'role' =>
4 'ROLE_ALLOWED_TO_SWITCH'),
5
6
// ...
7
),
);

Switching to another user is now a matter of adding the _switch_user query parameter to any URL when
logged in as a user who has the ROLE_ALLOWED_TO_SWITCH role:
Listing 30-22

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 97

1 {% if is_granted('ROLE_ALLOWED_TO_SWITCH') %}
2
<a href="?_switch_user=fabien">Switch to user Fabien</a>
3 {% endif %}

You can check that you are impersonating a user by checking the special ROLE_PREVIOUS_ADMIN. This is
useful for instance to allow the user to switch back to their primary account:
Listing 30-23

1 {% if is_granted('ROLE_PREVIOUS_ADMIN') %}
2
You are an admin but you've switched to another user,
3
<a href="?_switch_user=_exit"> exit</a> the switch.
4 {% endif %}

Defining a Role Hierarchy

Defining a role hierarchy allows to automatically grant users some additional roles:
Listing 30-24

1 $app['security.role_hierarchy'] = array(
2
'ROLE_ADMIN' => array('ROLE_USER', 'ROLE_ALLOWED_TO_SWITCH'),
3 );

With this configuration, all users with the ROLE_ADMIN role also automatically have the ROLE_USER and
ROLE_ALLOWED_TO_SWITCH roles.

Defining Access Rules

Roles are a great way to adapt the behavior of your website depending on groups of users, but they can
also be used to further secure some areas by defining access rules:
Listing 30-25

1 $app['security.access_rules'] = array(
2
array('^/admin', 'ROLE_ADMIN', 'https'),
3
array('^.*$', 'ROLE_USER'),
4 );

With the above configuration, users must have the ROLE_ADMIN to access the /admin section of the
website, and ROLE_USER for everything else. Furthermore, the admin section can only be accessible via
HTTPS (if that's not the case, the user will be automatically redirected).
The first argument can also be a RequestMatcher7 instance.

Defining a custom User Provider

Using an array of users is simple and useful when securing an admin section of a personal website, but
you can override this default mechanism with you own.
The users setting can be defined as a service that returns an instance of UserProviderInterface8:
Listing 30-26

7. http://api.symfony.com/master/Symfony/Component/HttpFoundation/RequestMatcher.html
8. http://api.symfony.com/master/Symfony/Component/Security/Core/User/UserProviderInterface.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 98

1 'users' => $app->share(function () use ($app) {

2
return new UserProvider($app['db']);
3 }),

Here is a simple example of a user provider, where Doctrine DBAL is used to store the users:
Listing 30-27

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

use
use
use
use
use
use

Symfony\Component\Security\Core\User\UserProviderInterface;
Symfony\Component\Security\Core\User\UserInterface;
Symfony\Component\Security\Core\User\User;
Symfony\Component\Security\Core\Exception\UnsupportedUserException;
Symfony\Component\Security\Core\Exception\UsernameNotFoundException;
Doctrine\DBAL\Connection;

class UserProvider implements UserProviderInterface

{
private $conn;
public function __construct(Connection $conn)
{
$this->conn = $conn;
}
public function loadUserByUsername($username)
{
$stmt = $this->conn->executeQuery('SELECT * FROM users WHERE username = ?',
array(strtolower($username)));
if (!$user = $stmt->fetch()) {
throw new UsernameNotFoundException(sprintf('Username "%s" does not exist.',
$username));
}
return new User($user['username'], $user['password'], explode(',',
$user['roles']), true, true, true, true);
}
public function refreshUser(UserInterface $user)
{
if (!$user instanceof User) {
throw new UnsupportedUserException(sprintf('Instances of "%s" are not
supported.', get_class($user)));
}
return $this->loadUserByUsername($user->getUsername());
}
public function supportsClass($class)
{
return $class === 'Symfony\Component\Security\Core\User\User';
}
}

In this example, instances of the default User class are created for the users, but you can define your own
class; the only requirement is that the class must implement UserInterface9
And here is the code that you can use to create the database schema and some sample users:

9. http://api.symfony.com/master/Symfony/Component/Security/Core/User/UserInterface.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 99

Listing 30-28

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

use Doctrine\DBAL\Schema\Table;
$schema = $app['db']->getSchemaManager();
if (!$schema->tablesExist('users')) {
$users = new Table('users');
$users->addColumn('id', 'integer', array('unsigned' =>
$users->setPrimaryKey(array('id'));
$users->addColumn('username', 'string', array('length'
$users->addUniqueIndex(array('username'));
$users->addColumn('password', 'string', array('length'
$users->addColumn('roles', 'string', array('length' =>

true, 'autoincrement' => true));

=> 32));
=> 255));
255));

$schema->createTable($users);
$app['db']->insert('users', array(
'username' => 'fabien',
'password' =>
'5FZ2Z8QIkA7UTZ4BYkoC+GsReLf569mSKDsfods6LYQ8t+a8EW9oaircfMpmaLbPBh4FOBiiFyLfuZmTSUwzZg==',
'roles' => 'ROLE_USER'
));
$app['db']->insert('users', array(
'username' => 'admin',
'password' =>
'5FZ2Z8QIkA7UTZ4BYkoC+GsReLf569mSKDsfods6LYQ8t+a8EW9oaircfMpmaLbPBh4FOBiiFyLfuZmTSUwzZg==',
'roles' => 'ROLE_ADMIN'
));
}

If you are using the Doctrine ORM, the Symfony bridge for Doctrine provides a user provider class
that is able to load users from your entities.

Defining a custom Encoder

By default, Silex uses the sha512 algorithm to encode passwords. Additionally, the password is encoded
multiple times and converted to base64. You can change these defaults by overriding the
security.encoder.digest service:
Listing 30-29

1 use Symfony\Component\Security\Core\Encoder\MessageDigestPasswordEncoder;
2
3 $app['security.encoder.digest'] = $app->share(function ($app) {
4
// use the sha1 algorithm
5
// don't base64 encode the password
6
// use only 1 iteration
7
return new MessageDigestPasswordEncoder('sha1', false, 1);
8 });

Defining a custom Authentication Provider

The Symfony Security component provides a lot of ready-to-use authentication providers (form, HTTP,
X509, remember me, ...), but you can add new ones easily. To register a new authentication provider,
create a service named security.authentication_listener.factory.XXX where XXX is the name you
want to use in your configuration:
PDF brought to you by
generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 100

Listing 30-30

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

$app['security.authentication_listener.factory.wsse'] = $app->protect(function ($name,

$options) use ($app) {
// define the authentication provider object
$app['security.authentication_provider.'.$name.'.wsse'] = $app->share(function () use
($app) {
return new WsseProvider($app['security.user_provider.default'],
__DIR__.'/security_cache');
});

// define the authentication listener object

$app['security.authentication_listener.'.$name.'.wsse'] = $app->share(function () use
($app) {
// use 'security' instead of 'security.token_storage' on Symfony <2.6
return new WsseListener($app['security.token_storage'],
$app['security.authentication_manager']);
});
return array(
// the authentication provider id
'security.authentication_provider.'.$name.'.wsse',
// the authentication listener id
'security.authentication_listener.'.$name.'.wsse',
// the entry point id
null,
// the position of the listener in the stack
'pre_auth'
);
});

You can now use it in your configuration like any other built-in authentication provider:
Listing 30-31

1 $app->register(new Silex\Provider\SecurityServiceProvider(), array(

2
'security.firewalls' => array(
3
'default' => array(
4
'wsse' => true,
5
6
// ...
7
),
8
),
9 ));

Instead of true, you can also define an array of options that customize the behavior of your
authentication factory; it will be passed as the second argument of your authentication factory (see
above).
This example uses the authentication provider classes as described in the Symfony cookbook10.

Stateless Authentication
By default, a session cookie is created to persist the security context of the user. However, if you use
certificates, HTTP authentication, WSSE and so on, the credentials are sent for each request. In that case,
you can turn off persistence by activating the stateless authentication flag:
Listing 30-32

1 $app['security.firewalls'] = array(
2
'default' => array(

10. http://symfony.com/doc/current/cookbook/security/custom_authentication_provider.html

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 101

3
4
5
6
7
8 );

'stateless' => true,

'wsse' => true,

// ...
),

Traits
Silex\Application\SecurityTrait adds the following shortcuts:
encodePassword: Encode a given password.
Listing 30-33

1 $user = $app->user();
2
3 $encoded = $app->encodePassword($user, 'foo');

Silex\Route\SecurityTrait adds the following methods to the controllers:

secure: Secures a controller for the given roles.
Listing 30-34

1 $app->get('/', function () {
2
// do something but only for admins
3 })->secure('ROLE_ADMIN');

The Silex\Route\SecurityTrait must be used with a user defined Route class, not the
application.
Listing 30-35

Listing 30-36

1
2
3
4
5
6

use Silex\Route;
class MyRoute extends Route
{
use Route\SecurityTrait;
}

1 $app['route_class'] = 'MyRoute';

PDF brought to you by

generated on November 18, 2015

Chapter 30: SecurityServiceProvider | 102

Chapter 31

RememberMeServiceProvider
The RememberMeServiceProvider adds "Remember-Me" authentication to the SecurityServiceProvider.

Parameters
n/a

Services
n/a
The service provider defines many other services that are used internally but rarely need to be
customized.

Registering
Before registering this service provider, you must register the SecurityServiceProvider:
Listing 31-1

1 $app->register(new Silex\Provider\SecurityServiceProvider());
2 $app->register(new Silex\Provider\RememberMeServiceProvider());
3
4 $app['security.firewalls'] = array(
5
'my-firewall' => array(
6
'pattern'
=> '^/secure$',
7
'form'
=> true,
8
'logout'
=> true,
9
'remember_me' => array(
10
'key'
=> 'Choose_A_Unique_Random_Key',
11
'always_remember_me' => true,

PDF brought to you by

generated on November 18, 2015

Chapter 31: RememberMeServiceProvider | 103

12
13
14
15
16 );

/* Other options */
),
'users' => array( /* ... */ ),
),

Options

key: A secret key to generate tokens (you should generate a random string).
name: Cookie name (default: REMEMBERME).
lifetime: Cookie lifetime (default: 31536000 ~ 1 year).
path: Cookie path (default: /).
domain: Cookie domain (default: null = request domain).
secure: Cookie is secure (default: false).
httponly: Cookie is HTTP only (default: true).
always_remember_me: Enable remember me (default: false).
remember_me_parameter: Name of the request parameter enabling remember_me on login.
To add the checkbox to the login form. You can find more information in the Symfony
cookbook1 (default: _remember_me).

1. http://symfony.com/doc/current/cookbook/security/remember_me.html

PDF brought to you by

generated on November 18, 2015

Chapter 31: RememberMeServiceProvider | 104

Chapter 32

SerializerServiceProvider
The SerializerServiceProvider provides a service for serializing objects.

Parameters
None.

Services
serializer: An instance of Symfony\Component\Serializer\Serializer1.
serializer.encoders:
Symfony\Component\Serializer\Encoder\JsonEncoder2
and
Symfony\Component\Serializer\Encoder\XmlEncoder3.
serializer.normalizers: Symfony\Component\Serializer\Normalizer\CustomNormalizer4 and
Symfony\Component\Serializer\Normalizer\GetSetMethodNormalizer5.

Registering
Listing 32-1

1 $app->register(new Silex\Provider\SerializerServiceProvider());

1. http://api.symfony.com/master/Symfony/Component/Serializer/Serializer.html
2. http://api.symfony.com/master/Symfony/Component/Serializer/Encoder/JsonEncoder.html
3. http://api.symfony.com/master/Symfony/Component/Serializer/Encoder/XmlEncoder.html
4. http://api.symfony.com/master/Symfony/Component/Serializer/Normalizer/CustomNormalizer.html
5. http://api.symfony.com/master/Symfony/Component/Serializer/Normalizer/GetSetMethodNormalizer.html

PDF brought to you by

generated on November 18, 2015

Chapter 32: SerializerServiceProvider | 105

The SerializerServiceProvider relies on Symfony's Serializer Component6, which comes with the
"fat" Silex archive but not with the regular one. If you are using Composer, add it as a dependency:
Listing 32-2

1 composer require symfony/serializer

Usage
The SerializerServiceProvider provider provides a serializer service:
Listing 32-3

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

use Silex\Application;
use Silex\Provider\SerializerServiceProvider;
use Symfony\Component\HttpFoundation\Response;
$app = new Application();
$app->register(new SerializerServiceProvider());

// only accept content types supported by the serializer via the assert method.
$app->get("/pages/{id}.{_format}", function ($id) use ($app) {
// assume a page_repository service exists that returns Page objects. The
// object returned has getters and setters exposing the state.
$page = $app['page_repository']->find($id);
$format = $app['request']->getRequestFormat();
if (!$page instanceof Page) {
$app->abort("No page found for id: $id");
}
return new Response($app['serializer']->serialize($page, $format), 200, array(
"Content-Type" => $app['request']->getMimeType($format)
));
})->assert("_format", "xml|json")
->assert("id", "\d+");

6. http://symfony.com/doc/current/components/serializer.html

PDF brought to you by

generated on November 18, 2015

Chapter 32: SerializerServiceProvider | 106

Chapter 33

ServiceControllerServiceProvider
As your Silex application grows, you may wish to begin organizing your controllers in a more formal
fashion. Silex can use controller classes out of the box, but with a bit of work, your controllers can be
created as services, giving you the full power of dependency injection and lazy loading.

Why would I want to do this?

Dependency Injection over Service Location
Using this method, you can inject the actual dependencies required by your controller and gain
total inversion of control, while still maintaining the lazy loading of your controllers and its
dependencies. Because your dependencies are clearly defined, they are easily mocked, allowing
you to test your controllers in isolation.
Framework Independence
Using this method, your controllers start to become more independent of the framework you
are using. Carefully crafted, your controllers will become reusable with multiple frameworks.
By keeping careful control of your dependencies, your controllers could easily become
compatible with Silex, Symfony (full stack) and Drupal, to name just a few.

Parameters
There are currently no parameters for the ServiceControllerServiceProvider.

Services
There are no extra services provided, the ServiceControllerServiceProvider simply extends the
existing resolver service.

PDF brought to you by

generated on November 18, 2015

Chapter 33: ServiceControllerServiceProvider | 107

Registering
Listing 33-1

1 $app->register(new Silex\Provider\ServiceControllerServiceProvider());

Usage
In this slightly contrived example of a blog API, we're going to change the /posts.json route to use a
controller, that is defined as a service.
Listing 33-2

1
2
3
4
5
6
7
8
9
10
11
12

use Silex\Application;
use Demo\Repository\PostRepository;
$app = new Application();
$app['posts.repository'] = $app->share(function() {
return new PostRepository;
});
$app->get('/posts.json', function() use ($app) {
return $app->json($app['posts.repository']->findAll());
});

Rewriting your controller as a service is pretty simple, create a Plain Ol' PHP Object with your
PostRepository as a dependency, along with an indexJsonAction method to handle the request.
Although not shown in the example below, you can use type hinting and parameter naming to get the
parameters you need, just like with standard Silex routes.
If you are a TDD/BDD fan (and you should be), you may notice that this controller has well defined
responsibilities and dependencies, and is easily tested/specced. You may also notice that the only external
dependency is on Symfony\Component\HttpFoundation\JsonResponse, meaning this controller could
easily be used in a Symfony (full stack) application, or potentially with other applications or frameworks
that know how to handle a Symfony/HttpFoundation1 Response object.
Listing 33-3

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

namespace Demo\Controller;
use Demo\Repository\PostRepository;
use Symfony\Component\HttpFoundation\JsonResponse;
class PostController
{
protected $repo;
public function __construct(PostRepository $repo)
{
$this->repo = $repo;
}
public function indexJsonAction()
{
return new JsonResponse($this->repo->findAll());
}
}

1. http://symfony.com/doc/master/components/http_foundation/introduction.html

PDF brought to you by

generated on November 18, 2015

Chapter 33: ServiceControllerServiceProvider | 108

And lastly, define your controller as a service in the application, along with your route. The syntax in the
route definition is the name of the service, followed by a single colon (:), followed by the method name.
Listing 33-4

1 $app['posts.controller'] = $app->share(function() use ($app) {

2
return new PostController($app['posts.repository']);
3 });
4
5 $app->get('/posts.json', "posts.controller:indexJsonAction");

PDF brought to you by

generated on November 18, 2015

Chapter 33: ServiceControllerServiceProvider | 109

Chapter 34

Webserver Configuration

Apache
If you are using Apache, make sure mod_rewrite is enabled and use the following .htaccess file:
Listing 34-1

1 <IfModule mod_rewrite.c>
2
Options -MultiViews
3
4
RewriteEngine On
5
#RewriteBase /path/to/app
6
RewriteCond %{REQUEST_FILENAME} !-f
7
RewriteRule ^ index.php [QSA,L]
8 </IfModule>

If your site is not at the webroot level you will have to uncomment the RewriteBase statement and
adjust the path to point to your directory, relative from the webroot.

Alternatively, if you use Apache 2.2.16 or higher, you can use the FallbackResource directive1 to make
your .htaccess even easier:
Listing 34-2

1 FallbackResource /index.php

If your site is not at the webroot level you will have to adjust the path to point to your directory,
relative from the webroot.

1. http://www.adayinthelifeof.nl/2012/01/21/apaches-fallbackresource-your-new-htaccess-command/

PDF brought to you by

generated on November 18, 2015

Chapter 34: Webserver Configuration | 110

nginx
The minimum configuration to get your application running under Nginx is:
Listing 34-3

1 server {
2
server_name domain.tld www.domain.tld;
3
root /var/www/project/web;
4
5
location / {
6
# try to serve file directly, fallback to front controller
7
try_files $uri /index.php$is_args$args;
8
}
9
10
# If you have 2 front controllers for dev|prod use the following line instead
11
# location ~ ^/(index|index_dev)\.php(/|$) {
12
location ~ ^/index\.php(/|$) {
13
# the ubuntu default
14
fastcgi_pass
unix:/var/run/php5-fpm.sock;
15
# for running on centos
16
#fastcgi_pass unix:/var/run/php-fpm/www.sock;
17
18
fastcgi_split_path_info ^(.+\.php)(/.*)$;
19
include fastcgi_params;
20
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
21
fastcgi_param HTTPS off;
22
23
# Prevents URIs that include the front controller. This will 404:
24
# http://domain.tld/index.php/some-path
25
# Enable the internal directive to disable URIs like this
26
# internal;
27
}
28
29
#return 404 for all php files as we do have a front controller
30
location ~ \.php$ {
31
return 404;
32
}
33
34
error_log /var/log/nginx/project_error.log;
35
access_log /var/log/nginx/project_access.log;
36 }

IIS
If you are using the Internet Information Services from Windows, you can use this sample web.config
file:
Listing 34-4

1 <?xml version="1.0"?>
2 <configuration>
3
<system.webServer>
4
<defaultDocument>
5
<files>
6
<clear />
7
<add value="index.php" />
8
</files>
9
</defaultDocument>
10
<rewrite>

PDF brought to you by

generated on November 18, 2015

Chapter 34: Webserver Configuration | 111

11
<rules>
12
<rule name="Silex Front Controller" stopProcessing="true">
13
<match url="^(.*)$" ignoreCase="false" />
14
<conditions logicalGrouping="MatchAll">
15
<add input="{REQUEST_FILENAME}" matchType="IsFile"
16 ignoreCase="false" negate="true" />
17
</conditions>
18
<action type="Rewrite" url="index.php" appendQueryString="true" />
19
</rule>
20
</rules>
21
</rewrite>
22
</system.webServer>
</configuration>

Lighttpd
If you are using lighttpd, use this sample simple-vhost as a starting point:
Listing 34-5

1 server.document-root = "/path/to/app"
2
3 url.rewrite-once = (
4
# configure some static files
5
"^/assets/.+" => "$0",
6
"^/favicon\.ico$" => "$0",
7
8
"^(/[^\?]*)(\?.*)?" => "/index.php$1$2"
9 )

PHP 5.4
PHP 5.4 ships with a built-in webserver for development. This server allows you to run silex without
any configuration. However, in order to serve static files, you'll have to make sure your front controller
returns false in that case:
Listing 34-6

1
2
3
4
5
6
7
8
9

// web/index.php
$filename = __DIR__.preg_replace('#(\?.*)$#', '', $_SERVER['REQUEST_URI']);
if (php_sapi_name() === 'cli-server' && is_file($filename)) {
return false;
}
$app = require __DIR__.'/../src/app.php';
$app->run();

Assuming your front controller is at web/index.php, you can start the server from the command-line
with this command:
Listing 34-7

1 $ php -S localhost:8080 -t web web/index.php

Now the application should be running at http://localhost:8080.

PDF brought to you by

generated on November 18, 2015

Chapter 34: Webserver Configuration | 112

This server is for development only. It is not recommended to use it in production.

PDF brought to you by

generated on November 18, 2015

Chapter 34: Webserver Configuration | 113

Chapter 35

Changelog

1.3.5 (2015-XX-XX)
n/a

1.3.4 (2015-09-15)
fixed some new deprecations
fixed translation registration for the validators

1.3.3 (2015-09-08)

added support for Symfony 3.0 and Twig 2.0

fixed some Form deprecations
removed deprecated method call in the exception handler
fixed Swiftmailer spool flushing when spool is not enabled

1.3.2 (2015-08-24)
no changes

1.3.1 (2015-08-04)

added missing support for the Expression constraint

fixed the possibility to override translations for validator error messages
fixed sub-mounts with same name clash
fixed session logout handler when a firewall is stateless

PDF brought to you by

generated on November 18, 2015

Chapter 35: Changelog | 114

1.3.0 (2015-06-05)

added a $app['user'] to get the current user (security provider)

added view handlers
added support for the OPTIONS HTTP method
added caching for the Translator provider
deprecated $app['exception_handler']->disable() in favor of unset($app['exception_handler'])
made Silex compatible with Symfony 2.7 an 2.8 (and keep compatibility with Symfony 2.3,
2.5, and 2.6)
removed deprecated TwigCoreExtension class (register the new HttpFragmentServiceProvider
instead)
bumped minimum version of PHP to 5.3.9

1.2.5 (2015-06-04)
no code changes (last version of the 1.2 branch)

1.2.4 (2015-04-11)
fixed the exception message when mounting a collection that doesn't return a
ControllerCollection
fixed Symfony dependencies (Silex 1.2 is not compatible with Symfony 2.7)

1.2.3 (2015-01-20)
fixed remember me listener
fixed translation files loading when they do not exist
allowed global after middlewares to return responses like route specific ones

1.2.2 (2014-09-26)
fixed Translator locale management
added support for the $app argument in application middlewares (to make it consistent with
route middlewares)
added form.types to the Form provider

1.2.1 (2014-07-01)
added support permissions in the Monolog provider
fixed Switfmailer spool where the event dispatcher is different from the other ones
fixed locale when changing it on the translator itself

1.2.0 (2014-03-29)
Allowed disabling the boot logic of MonologServiceProvider
Reverted "convert attributes on the request that actually exist"

PDF brought to you by

generated on November 18, 2015

Chapter 35: Changelog | 115

 [BC BREAK] Routes are now always added in the order of their registration (even for mounted
routes)
Added run() on Route to be able to define the controller code
Deprecated TwigCoreExtension (register the new HttpFragmentServiceProvider instead)
Added HttpFragmentServiceProvider
Allowed a callback to be a method call on a service (before, after, finish, error, on Application;
convert, before, after on Controller)

1.1.3 (2013-XX-XX)
Fixed translator locale management

1.1.2 (2013-10-30)
Added missing "security.hide_user_not_found" support in SecurityServiceProvider
Fixed event listeners that are registered after the boot via the on() method

1.0.2 (2013-10-30)
Fixed SecurityServiceProvider to use null as a fake controller so that routes can be dumped

1.1.1 (2013-10-11)
Removed or replaced deprecated Symfony code
Updated code to take advantages of 2.3 new features
Only convert attributes on the request that actually exist.

1.1.0 (2013-07-04)
Support for any Psr\Log\LoggerInterface as opposed to the monolog-bridge one.
Made dispatcher proxy methods on, before, after and error lazy, so that they will not
instantiate the dispatcher early.
Dropped support for 2.1 and 2.2 versions of Symfony.

1.0.1 (2013-07-04)
Fixed RedirectableUrlMatcher::redirect() when Silex is configured to use a logger
Make DoctrineServiceProvider multi-db support lazy.

1.0.0 (2013-05-03)
2013-04-12: Added support for validators as services.
2013-04-01: Added support for host matching with symfony 2.2:
Listing 35-1

PDF brought to you by

generated on November 18, 2015

Chapter 35: Changelog | 116

1
2
3
4
5
6
7

$app->match('/', function() {
// app-specific action
})->host('example.com');
$app->match('/', function ($user) {
// user-specific action
})->host('{user}.example.com');

2013-03-08: Added support for form type extensions and guessers as services.
2013-03-08: Added support for remember-me via the RememberMeServiceProvider.
2013-02-07: Added Application::sendFile() to ease sending BinaryFileResponse.
2012-11-05: Filters have been renamed to application middlewares in the documentation.
2012-11-05: The before(), after(), error(), and finish() listener priorities now set the
priority of the underlying Symfony event instead of a custom one before.
2012-11-05: Removing the default exception handler should now be done via its disable()
method:
Before:
unset($app['exception_handler']);
After:
$app['exception_handler']->disable();

2012-07-15: removed the monolog.configure service. Use the extend method instead:
Before:
Listing 35-2

1 $app['monolog.configure'] = $app->protect(function ($monolog) use ($app) {

2
// do something
3 });

After:
Listing 35-3

1 $app['monolog'] = $app->share($app->extend('monolog', function($monolog,

2 $app) {
3
// do something
4
5
return $monolog;
}));

2012-06-17: ControllerCollection now takes a required route instance as a constructor

argument.

PDF brought to you by

generated on November 18, 2015

Chapter 35: Changelog | 117

Before:
Listing 35-4

1 $controllers = new ControllerCollection();

After:
Listing 35-5

1 $controllers = new ControllerCollection(new Route());

2
3 // or even better
4 $controllers = $app['controllers_factory'];

2012-06-17: added application traits for PHP 5.4

2012-06-16: renamed request.default_locale to locale
2012-06-16: Removed the translator.loader service. See documentation for how to use
XLIFF or YAML-based translation files.
2012-06-15: removed the twig.configure service. Use the extend method instead:
Before:
Listing 35-6

1 $app['twig.configure'] = $app->protect(function ($twig) use ($app) {

2
// do something
3 });

After:
Listing 35-7

1 $app['twig'] = $app->share($app->extend('twig', function($twig, $app) {

2
// do something
3
4
return $twig;
5 }));

2012-06-13: Added a route before middleware

2012-06-13: Renamed the route middleware to before
2012-06-13: Added an extension for the Symfony Security component
2012-05-31: Made the BrowserKit, CssSelector, DomCrawler, Finder and Process
components optional dependencies. Projects that depend on them (e.g. through functional
tests) should add those dependencies to their composer.json.
2012-05-26: added boot() to ServiceProviderInterface.
2012-05-26: Removed SymfonyBridgesServiceProvider. It is now implicit by checking the
existence of the bridge.
2012-05-26: Removed the translator.messages parameter (use translator.domains
instead).
2012-05-24: Removed the autoloader service (use composer instead). The *.class_path
settings on all the built-in providers have also been removed in favor of Composer.
2012-05-21: Changed error() to allow handling specific exceptions.
2012-05-20: Added a way to define settings on a controller collection.
PDF brought to you by
generated on November 18, 2015

Chapter 35: Changelog | 118

 2012-05-20: The Request instance is not available anymore from the Application after it has
been handled.
2012-04-01: Added finish filters.
2012-03-20: Added json helper:
Listing 35-8

1 $data = array('some' => 'data');

2 $response = $app->json($data);

2012-03-11: Added route middlewares.

2012-03-02: Switched to use Composer for dependency management.
2012-02-27: Updated to Symfony 2.1 session handling.
2012-01-02: Introduced support for streaming responses.
2011-09-22: ExtensionInterface has been renamed to ServiceProviderInterface. All
built-in
extensions
have
been
renamed
accordingly
(for
instance,
Silex\Extension\TwigExtension
has
been
renamed
to
Silex\Provider\TwigServiceProvider).
2011-09-22: The way reusable applications work has changed. The mount() method now
takes an instance of ControllerCollection instead of an Application one.
Before:
Listing 35-9

1 $app = new Application();

2 $app->get('/bar', function() { return 'foo'; });
3
4 return $app;

After:
Listing 35-10

1 $app = new ControllerCollection();

2 $app->get('/bar', function() { return 'foo'; });
3
4 return $app;

2011-08-08: The controller method configuration is now done on the Controller itself
Before:
Listing 35-11

1 $app->match('/', function () { echo 'foo'; }, 'GET|POST');

After:
Listing 35-12

1 $app->match('/', function () { echo 'foo'; })->method('GET|POST');

PDF brought to you by

generated on November 18, 2015

Chapter 35: Changelog | 119