E Series
Eaton E Series DX
20, 30, 40 kVA
Product introduction
The Eaton E Series DX is a three-phase, double conversion
uninterruptible power supply (UPS), and is available in 20, 30
and 40kVA output power rates with internal batteries capable to
provide runtime up to 15 min. Its design fits perfectly to any environment where uninterrupted power feed is required to secure
critical equipments continuous operation. The E Series DX UPS
provides a perfect solution for power protection, and solves power
quality problems such as surges, spikes, voltage fluctuations, harmonic distortion, clutter interference and frequency fluctuations.
With E series DX, each phase is independently double converted
and regulated. In addition, PFC (power factor control) controller
is used for real time control and data processing, ensuring high
availability at all times. Further extent reliability is accomplished by
introducing intelligent charge mode which significantly prolongs
service life of batteries. Also, possibility to have dual feed on UPS
input adds availability thus increases reliability of system.
As an added benefit, IP21 compliant design makes E Series DX a
perfect fit to industrial and other applications, where harsh environmental conditions may set extent requirements to mechanical design. Optional filter is also available for further protection
against the smallest damaging particles.
Advanced power protection for:
s )4 AND NETWORKING ENVIRONMENTS
s WIRING CLOSETS
s ENTERPRISE SERVER APPLICATIONS
s SMALL INDUSTRIAL APPLICATIONS
N+X redundancy (supports parallel with the same
battery)
More capacity and availability can be achieved by parallel connection of E Series DX. E Series DX accommodates paralleling of up
to four modules for redundancy or capacity. By incorporating dual
battery feed and advanced battery controls, it utilizes common battery for parallel configurations.
Smaller footprint thanks to internal batteries
During power outage and other interruptions internal batteries provide emergency power to safeguard operations. Internal batteries
also eliminate the need for costly and space-consuming external
battery cabinets. Eaton E Series DX now incorporates internal batteries to provide a runtime from 5 to 15 minutes depending on the
power rating.
Intelligent battery charge and recharge management
With intelligent battery management system, charger parameters
can be automatically adjusted based on varying environmental
and load conditions to maximize battery service life and minimize
time required to re-charge. In addition, various optimized modes
are available vased on the type and amount of batteries, providing
extended battery life and reducing re-charge time if additional batteries are added.
Dual feed input
Dual feed input or dual AC source input, is available with E Series
DX. AC input source is selectable by user based on the installation
requirements.
Communications and remote management
Standard E Series DX model is always equipped with an intelligent
communications slot and RS-232 and RS-485 ports. Optional communications and SNMP/WEB cards are also available to enable
remote monitoring and remote management.
Excellent electrical performance
With total efficiency reaching 92 percent in normal mode, the E
Series DX can achieve up to 98 percent efficiency in high-efficiency mode, reducing electrical costs and total cost of ownership.
With a wide input voltage range of 210 to 475 Vac, the E Series
DX is able to operate in harsh electrical environments, providing enhanced availability by utilizing intelligent IGBT-based highfrequency technology to achieve greater than a .99 power factor.
Harmonic distortion is less than five percent.
SNMP Webpower card
Further providing peace of mind in harsh electrical environments,
the E Series DX provides enhanced overload protection. In fact,
the E Series DX can operate for ten minutes at a 110 to 125
percent overload and one minute at a 150% overload with short
circuit protection.
Technical specifications
Operation environment
Input
400 Vac (L-L)
230 Vac (L-N)
Temperature
0C to 40C
Humidity
20% to 90%
Frequency
40-65 Hz (self-adaptive to 50 Hz and 60 Hz)
Efficiency
Wiring
3-Phase + N + PE
Line mode
92%
THD i
<5%
HE (high efficiency)
98%
Power factor
>0.99
Display
Dual-line input
Support
Nominal Voltage
Battery
Type
Maintenance free VRLA batteries
Backup time
Up to 15 min with internal batteries
Battery nominal voltage 360 V (30x12 V, 180 cells)
(lead-acid)
384 V (32x12 V, 192 cells)
LCD
Chinese/English UPS state and operation
introduction. Input voltage, output voltage, current,
frequency, charger voltage and current, fault and
warning display.
LED
UPS operation state
Warning equipment
Buzzer alarm and light double LED
Output
Communication interface
400 Vac (L-L)
230 Vac (L-N)
Voltage
RS-232, AS/400, RS485, service, EPO, compensate
interface for battery temperature, intelligent slot
Frequency
50/60 Hz
Phase
Three-phase four wire + grounding
Power factor
0.8
Overload capability
125%, 10 min.
150%, 1 min.
Description
kVA
Compliance with standards
Safety (CB certified)
IEC62040-1, EN60950-1
EMC
IEC 62040-2, IEC 61000-4-2, IEC 61000-4-3, IEC 610004-4, IEC 61000-4-5
Model description
Part number
Net weight (kg)
Gross weight (kg)
Dimensions (WxDxH mm)
Standard models using external 20
battery solution
30
Eaton E Series DX 20 kVA
EDX20K4E
82
122
420 X 643 X 956
Eaton E Series DX 30 kVA
EDX30K4E
135
210
450 X 700 X 1150
40
Eaton E Series DX 40 kVA
EDX40K4E
140
215
450 X 700 X 1150
Standard models with space for 20
internal batteries
30
Eaton E Series DX 20 kVA B
EDX20K4EB
120
166
420 X 700 X 1245
Eaton E Series DX 30 kVA B
EDX30K4EB
195
255
470 X 700 X 1730
40
Eaton E Series DX 40 kVA B
EDX40K4EB
195
255
470 X 700 X 1730
20
Eaton E Series DX 20 kVA BI
EDX20K4EBI
272
320
420 X 700 X 1245
30
Eaton E Series DX 30 kVA BI
EDX30K4EBI
515
575
470 X 700 X 1730
40
Eaton E Series DX 40 kVA BI
EDX40K4EBI
515
575
470 X 700 X 1730
Standard models with internal
batteries installed
Runtime for UPS with internal batteries p.f. 0.7 (typical IT server/computer load)
Battery
Qty
20
30
40
kVA
7 Ah 12 V
2 x 30
min
9 Ah 12 V
2 x 30
10
min
7 Ah 12 V
3 x 32
min
9 Ah 12 V
3 x 32
10
min
7 Ah 12 V
4 x 32
11
min
9 Ah 12 V
4 x 32
15
10
min
www.eaton.com/eseries
Eaton is trade name, trademark, and/or
service mark of Eaton Corporation or its
subsidiaries and affiliates.
2010 Eaton Corporation
All Rights Reserved
00DATA1018113 rev D
August 2010
