ESO(1)

Reference and title of the

harmonised standard
(and reference document)

Reference of
superseded standard

Date of
applicability
of the
standard as
a
harmonised
standard

Date of the
end of the
co-existence
period Note
4

01/01/2008

01/01/2009

01/01/2008

01/01/2009

01/10/2006

01/10/2007

01/01/2007

01/01/2007

01/02/2003

01/02/2005

01/02/2003

01/02/2005

01/10/2003

01/10/2004

01/01/2008

01/08/2009

01/01/2008

01/08/2009

01/01/2008

01/01/2008

01/04/2003

01/06/2009

EN 1:1998
CEN

Flued oil stoves with vaporizing

burners
EN 1:1998/A1:2007

Note 3

EN 40-4:2005

CEN

Lighting columns - Part 4:

Requirements for reinforced and
prestressed concrete lighting
columns
EN 40-4:2005/AC:2006
EN 40-5:2002

CEN

Lighting columns - Part 5:

Requirements for steel lighting
columns
EN 40-6:2002

CEN

Lighting columns - Part 6:

Requirements for aluminium
lighting columns
EN 40-7:2002

CEN

Lighting columns - Part 7:

Requirements for fibre reinforced
polymer composite lighting
columns
EN 54-2:1997

CEN

Fire detection and fire alarm

systems - Part 2: Control and
indicating equipment
EN 54-2:1997/A1:2006

Note 3

EN 54-2:1997/AC:1999
EN 54-3:2001

CEN

Fire detection and fire alarm

systems - Part 3: Fire alarm
devices - Sounders
EN 54-3:2001/A1:2002

Note 3

01/04/2003

30/06/2005

EN 54-3:2001/A2:2006

Note 3

01/03/2007

01/06/2009

EN 54-4:1997
Fire detection and fire alarm
systems - Part 4: Power supply
equipment
CEN

01/10/2003

01/08/2009

EN 54-4:1997/A1:2002

Note 3

01/10/2003

01/08/2009

EN 54-4:1997/A2:2006

Note 3

01/06/2007

01/08/2009

01/06/2005

01/06/2005

01/04/2003

30/06/2005

01/04/2003

30/06/2005

01/04/2003

01/08/2009

EN 54-4:1997/AC:1999
EN 54-5:2000
CEN

Fire detection and fire alarm

systems - Part 5: Heat detectors Point detectors
EN 54-5:2000/A1:2002

Note 3

EN 54-7:2000

CEN

Fire detection and fire alarm

systems - Part 7: Smoke
detectors - Point detectors using
scattered light, transmitted light
or ionization
EN 54-7:2000/A1:2002

Note 3

01/04/2003

30/06/2005

EN 54-7:2000/A2:2006

Note 3

01/05/2007

01/08/2009

01/09/2006

01/09/2008

01/09/2006

01/09/2008

01/09/2006

01/09/2008

01/09/2006

01/09/2008

01/10/2003

31/12/2005

EN 54-10:2002
CEN

Fire detection and fire alarm

systems - Part 10: Flame
detectors - Point detectors
EN 54-10:2002/A1:2005

Note 3

EN 54-11:2001
CEN

Fire detection and fire alarm

systems - Part 11: Manual call
points
EN 54-11:2001/A1:2005

Note 3

EN 54-12:2002
CEN

Fire detection and fire alarm

systems - Part 12: Smoke
detectors - Line detectors using
an optical light beam
EN 54-16:2008

CEN

Fire detection and fire alarm

systems - Part 16: Voice alarm
control and indicating equipment

01/01/2009

01/04/2011

CEN

EN 54-17:2005

01/10/2006

01/12/2008

Fire detection and fire alarm

systems - Part 17: Short-circuit
isolators
EN 54-17:2005/AC:2007

01/01/2009

01/01/2009

Fire detection and fire alarm

systems - Part 18: Input/output
devices

01/10/2006

01/12/2008

EN 54-18:2005/AC:2007

01/01/2008

01/01/2008

Fire detection and fire alarm

systems - Part 20: Aspirating
smoke detectors

01/04/2007

01/07/2009

EN 54-20:2006/AC:2008

01/08/2009

01/08/2009

01/03/2007

01/06/2009

01/12/2010

31/12/2013

01/01/2009

01/04/2011

Fire detection and fire alarm

systems - Part 25: Components
using radio links

01/01/2009

01/04/2011

EN 54-25:2008/AC:2012

01/07/2012

01/07/2012

EN 179:1997

01/01/2009

01/01/2010

EN 197-1:2000
EN 197-4:2004

01/07/2012

01/07/2013

EN 54-18:2005
CEN

EN 54-20:2006
CEN

EN 54-21:2006
CEN

Fire detection and fire alarm

systems - Part 21: Alarm
transmission and fault warning
routing equipment
EN 54-23:2010

CEN

Fire detection and fire alarm

systems - Part 23: Fire alarm
devices - Visual alarm devices
EN 54-24:2008

CEN

Fire detection and fire alarm

systems - Part 24: Components of
voice alarm systems Loudspeakers
EN 54-25:2008

CEN

EN 179:2008
CEN

Building hardware - Emergency

exit devices operated by a lever
handle or push pad, for use on
escape routes - Requirements and
test methods
EN 197-1:2011

CEN

Cement - Part 1: Composition,

specifications and conformity
criteria for common cements

EN 295-1:2013 (new)
CEN

Vitrified clay pipe systems for

drains and sewers - Part 1:
Requirements for pipes, fittings
and joints

EN 295-10:2005

01/11/2013

01/11/2014

EN 295-10:2005

01/11/2013

01/11/2014

EN 295-10:2005

01/11/2013

01/11/2014

EN 295-10:2005

01/11/2013

01/11/2014

EN 295-10:2005

01/11/2013

01/11/2014

01/09/2011

01/09/2012

Note 3

01/09/2011

01/09/2012

EN 413-1:2004

01/02/2012

01/02/2013

01/12/2009

01/12/2010

01/11/2005

01/11/2006

EN 295-4:2013 (new)
CEN

Vitrified clay pipe systems for

drains and sewers - Part 4:
Requirements for adaptors,
connectors and flexible couplings
EN 295-5:2013 (new)

CEN

Vitrified clay pipe systems for

drains and sewers - Part 5:
Requirements for perforated pipes
and fittings
EN 295-6:2013 (new)

CEN

Vitrified clay pipes systems for

drain and sewers - Part 6:
Requirements for components of
manholes and inspection
chambers
EN 295-7:2013 (new)

CEN

Vitrified clay pipe systems for

drains and sewers - Part 7:
Requirements for pipes and joints
for pipe jacking
EN 331:1998

CEN

Manually operated ball valves and

closed bottom taper plug valves
for gas installations for buildings
EN 331:1998/A1:2010
EN 413-1:2011

CEN

Masonry cement - Part 1:

Composition, specifications and
conformity criteria
EN 416-1:2009

CEN

Single burner gas-fired overhead

radiant tube heaters for nondomestic use - Part 1: Safety
EN 438-7:2005

CEN

High-pressure decorative
laminates (HPL) - Sheets based
on thermosetting resins (Usually
called Laminates) - Part 7:
Compact laminate and HPL
composite panels for internal and
external wall and ceiling finishes

EN 442-1:1995
CEN

Radiators and convectors - Part 1:

Technical specifications and
requirements
EN 442-1:1995/A1:2003

01/12/2004

01/12/2005

Note 3

01/12/2004

01/12/2005

EN 4501:2005+A1:2007

01/05/2013

01/05/2014

EN 459-1:2001

01/06/2011

01/06/2012

EN 490:2004

01/08/2012

01/08/2012

EN 492:2004

01/07/2013

01/07/2013

EN
494:2004+A3:2007

01/08/2013

01/08/2013

01/11/2006

01/11/2007

01/12/2006

01/12/2007

01/06/2010

01/12/2010

01/06/2004

01/06/2005

01/01/2011

01/01/2011

EN 450-1:2012
CEN

Fly ash for concrete - Part 1:

Definition, specifications and
conformity criteria
EN 459-1:2010

CEN

Building lime - Part 1: Definitions,

specifications and conformity
criteria
EN 490:2011

CEN

Concrete roofing tiles and fittings

for roof covering and wall
cladding - Product specifications
EN 492:2012

CEN

Fibre-cement slates and fittings Product specification and test

methods
EN 494:2012

CEN

Fibre-cement profiled sheets and

fittings - Product specification and
test methods
EN 516:2006

CEN

Prefabricated accessories for

roofing - Installations for roof
access - Walkways, treads and
steps
EN 517:2006

CEN

Prefabricated accessories for

roofing - Roof safety hooks
EN 520:2004+A1:2009

CEN

Gypsum plasterboards Definitions, requirements and test

methods

EN 520:2004

EN 523:2003
CEN

CEN

Steel strip sheaths for

prestressing tendons Terminology, requirements,
quality control
EN 534:2006+A1:2010
Corrugated bitumen sheets -

EN 534:2006

Product specification and test

methods
EN 544:2011
CEN

Bitumen shingles with mineral

and/or synthetic reinforcements Product specification and test
methods

EN 544:2005

01/04/2012

01/04/2012

01/09/2005

01/09/2006

01/10/2002

01/10/2003

01/04/2010

01/04/2011

01/08/2010

01/08/2011

EN 671-1:2001

01/03/2013

01/07/2013

EN 671-2:2001

01/03/2013

01/07/2013

01/01/2003

01/01/2009

EN 572-9:2004
CEN

Glass in building - Basic soda lime

silicate glass products - Part 9:
Evaluation of conformity/Product
standard
EN 588-2:2001

CEN

Fibre cement pipes for drains and

sewers - Part 2: Manholes and
inspection chambers
EN 598:2007+A1:2009

CEN

Ductile iron pipes, fittings,

accessories and their joints for
sewerage applications Requirements and test methods

EN 598:2007

EN 621:2009

CEN

Non-domestic gas-fired forced

convection air heaters for space
heating not exceeding a net heat
input of 300 kW, without a fan to
assist transportation of
combustion air and/or combustion
products
EN 671-1:2012

CEN

Fixed firefighting systems - Hose

systems - Part 1: Hose reels with
semi-rigid hose
EN 671-2:2012

CEN

Fixed firefighting systems - Hose

systems - Part 2: Hose systems
with lay-flat hose

CEN

EN 681-1:1996
Elastomeric seals - Materials
requirements for pipe joint seals
used in water and drainage
applications - Part 1: Vulcanized
rubber
EN 681-1:1996/A1:1998

Note 3

01/01/2003

01/01/2004

EN 681-1:1996/A2:2002

Note 3

01/01/2003

01/01/2004

EN 681-1:1996/A3:2005

Note 3

01/01/2008

01/01/2009

01/01/2003

01/01/2004

EN 681-2:2000

CEN

Elastomeric Seals - Materials

requirements for pipe joint seals
used in water and drainage
applications - Part 2:
Thermoplastic elastomers
EN 681-2:2000/A1:2002

Note 3

01/01/2003

01/01/2004

EN 681-2:2000/A2:2005

Note 3

01/01/2010

01/01/2010

01/01/2003

01/01/2004

EN 681-3:2000

CEN

Elastomeric seals - Materials

requirements for pipe joint seals
used in water and drainage
applications - Part 3: Cellular
materials of vulcanized rubber
EN 681-3:2000/A1:2002

Note 3

01/01/2003

01/01/2004

EN 681-3:2000/A2:2005

Note 3

01/07/2012

01/07/2012

01/01/2003

01/01/2004

EN 681-4:2000

CEN

Elastomeric seals - Materials

requirements for pipe joint seals
used in water and drainage
applications - Part 4: Cast
polyurethane sealing elements
EN 681-4:2000/A1:2002

Note 3

01/01/2003

01/01/2004

EN 681-4:2000/A2:2005

Note 3

01/07/2012

01/07/2012

01/10/2002

01/12/2003

Note 3

01/07/2012

01/07/2012

EN 771-1:2003

01/02/2012

01/02/2013

EN 682:2002

CEN

Elastomeric Seals - Materials

requirements for seals used in
pipes and fittings carrying gas
and hydrocarbon fluids
EN 682:2002/A1:2005
EN 771-1:2011

CEN

Specification for masonry units Part 1: Clay masonry units

EN 771-2:2011

CEN

Specification for masonry units Part 2: Calcium silicate masonry

units

EN 771-2:2003

01/02/2012

01/02/2013

CEN

EN 771-3:2011

EN 771-3:2003

01/02/2012

01/02/2013

Specification for masonry units Part 3: Aggregate concrete

masonry units (Dense and

lightweight aggregates)
EN 771-4:2011
CEN

Specification for masonry units Part 4: Autoclaved aerated

concrete masonry units

EN 771-4:2003

01/02/2012

01/02/2013

EN 771-5:2003

01/02/2012

01/02/2013

EN 771-6:2005

01/02/2012

01/02/2013

01/11/2009

01/11/2010

01/11/2009

01/11/2010

01/11/2009

01/11/2010

01/11/2009

01/11/2010

01/08/2010

01/08/2011

01/01/2009

01/01/2010

EN 771-5:2011
CEN

Specification for masonry units Part 5: Manufactured stone

masonry units
EN 771-6:2011

CEN

Specification for masonry units Part 6: Natural stone masonry

units
EN 777-1:2009

CEN

Multi-burner gas-fired overhead

radiant tube heater systems for
non-domestic use - Part 1:
System D - Safety
EN 777-2:2009

CEN

Multi-burner gas-fired overhead

radiant tube heater systems for
non-domestic use - Part 2:
System E - Safety
EN 777-3:2009

CEN

Multi-burner gas-fired overhead

radiant tube heater systems for
non domestic use - Part 3:
System F - Safety
EN 777-4:2009

CEN

Multi-burner gas-fired overhead

radiant tube heater systems for
non-domestic use - Part 4:
System H - Safety
EN 778:2009

CEN

Domestic gas-fired forced

convection air heaters for space
heating not exceeding a net heat
input of 70 kW, without a fan to
assist transportation of
combustion air and/or combustion
products
EN 845-1:2003+A1:2008

CEN

Specification for ancillary

components for masonry - Part 1:
Ties, tension straps, hangers and
brackets

EN 845-1:2003

EN 845-2:2003
CEN

Specification for ancillary

components for masonry - Part 2:
Lintels

01/02/2004

01/04/2006

01/01/2009

01/01/2010

01/09/2005

01/09/2006

01/09/2005

01/09/2006

01/01/2008

01/09/2009

01/01/2008

01/09/2009

01/01/2009

01/01/2009

EN 934-2:2009

01/03/2013

01/09/2013

EN 934-3:2009

01/03/2013

01/09/2013

EN 934-4:2001

01/03/2010

01/03/2011

01/01/2009

01/01/2010

EN 845-3:2003+A1:2008
CEN

Specification for ancillary

components for masonry - Part 3:
Bed joint reinforcement of steel
meshwork

EN 845-3:2003

EN 858-1:2002

CEN

Separator systems for light liquids

(e.g. oil and petrol) - Part 1:
Principles of product design,
performance and testing, marking
and quality control
EN 858-1:2002/A1:2004

Note 3

EN 877:1999

CEN

Cast iron pipes and fittings, their

joints and accessories for the
evacuation of water from
buildings - Requirements, test
methods and quality assurance
EN 877:1999/A1:2006

Note 3

EN 877:1999/A1:2006/AC:2008
EN 934-2:2009+A1:2012
CEN

Admixtures for concrete, mortar

and grout - Part 2: Concrete
admixtures - Definitions,
requirements, conformity,
marking and labelling
EN 934-3:2009+A1:2012

CEN

Admixtures for concrete, mortar

and grout - Part 3: Admixtures for
masonry mortar - Definitions,
requirements, conformity and
marking and labelling
EN 934-4:2009

CEN

CEN

Admixtures for concrete, mortar

and grout - Part 4: Admixtures for
grout for prestressing tendons Definitions, requirements,
conformity, marking and labelling
EN 934-5:2007
Admixtures for concrete, mortar
and grout - Part 5: Admixtures for
sprayed concrete - Definitions,

requirements, conformity,
marking and labelling
EN 969:2009
CEN

Ductile iron pipes, fittings,

accessories and their joints for
gas pipelines - Requirements and
test methods

01/01/2010

01/01/2011

01/12/2012

01/06/2013

01/03/2013

01/03/2013

EN 998-1:2003

01/06/2011

01/06/2012

EN 998-2:2003

01/06/2011

01/06/2012

01/09/2013

01/09/2014

01/08/2010

01/08/2011

01/01/2009

01/01/2010

01/01/2009

01/01/2010

01/12/2010

01/12/2010

EN 997:2012
CEN

WC pans and WC suites with

integral trap

EN 997:2003

EN 997:2012/AC:2012
EN 998-1:2010
CEN

Specification for mortar for

masonry - Part 1: Rendering and
plastering mortar
EN 998-2:2010

CEN

Specification for mortar for

masonry - Part 2: Masonry mortar
EN 1013:2012

CEN

Light transmitting single skin

profiled plastics sheets for
internal and external roofs, walls
and ceilings - Requirements and
test methods
EN 1020:2009

CEN

Non-domestic forced convection

gas-fired air heaters for space
heating not exceeding a net heat
input of 300 kW incorporating a
fan to assist transportation of
combustion air or combustion
products
EN 1036-2:2008

CEN

Glass in building - Mirrors from

silver-coated float glass for
internal use - Part 2: Evaluation
of conformity; product standard
EN 1051-2:2007

CEN

CEN

Glass in building - Glass blocks

and glass pavers - Part 2:
Evaluation of conformity/Product
standard
EN 1057:2006+A1:2010
Copper and copper alloys Seamless, round copper tubes for
water and gas in sanitary and

EN 1057:2006

heating applications
EN 1090-1:2009+A1:2011
CEN

Execution of steel structures and

aluminium structures - Part 1:
Requirements for conformity
assessment of structural
components

EN 1090-1:2009

01/09/2012

01/07/2014

01/09/2005

01/09/2006

01/06/2005

01/06/2006

01/06/2005

01/06/2006

01/06/2005

01/06/2006

Note 3

01/06/2005

01/06/2006

EN 1125:1997

01/01/2009

01/01/2010

01/10/2003

01/10/2004

01/10/2003

01/10/2004

01/01/2010

01/01/2010

01/10/2003

01/10/2004

01/10/2003

01/10/2004

EN 1096-4:2004
CEN

Glass in building - Coated glass Part 4: Evaluation of

conformity/Product standard
EN 1123-1:1999

CEN

Pipes and fittings of longitudinally

welded hot-dip galvanized steel
pipes with spigot and socket for
waste water systems - Part 1:
Requirements, testing, quality
control
EN 1123-1:1999/A1:2004

Note 3

EN 1124-1:1999

CEN

Pipes and fittings of longitudinally

welded stainless steel pipes with
spigot and socket for waste water
systems - Part 1: Requirements,
testing, quality control
EN 1124-1:1999/A1:2004
EN 1125:2008

CEN

Building hardware - Panic exit

devices operated by a horizontal
bar, for use on escape routes Requirements and test methods
EN 1154:1996

CEN

Building hardware - Controlled

door closing devices Requirements and test methods
EN 1154:1996/A1:2002

Note 3

EN 1154:1996/A1:2002/AC:2006
CEN

EN 1155:1997
Building hardware - Electrically
powered hold-open devices for
swing doors - Requirements and
test methods
EN 1155:1997/A1:2002

Note 3

EN 1155:1997/A1:2002/AC:2006

01/01/2010

01/01/2010

01/10/2003

01/10/2004

01/10/2003

01/10/2004

01/06/2006

01/06/2006

EN
1168:2005+A2:2009

01/07/2012

01/07/2013

EN 12795:2005+A1:2008

01/02/2011

01/02/2012

01/02/2006

01/02/2007

01/01/2013

01/01/2013

01/03/2013

01/03/2013

01/10/2010

01/10/2011

01/01/2006

01/01/2007

Structural bearings - Part 4:

Roller bearings

01/02/2005

01/02/2006

EN 1337-4:2004/AC:2007

01/01/2008

01/01/2008

01/01/2006

01/01/2007

EN 1158:1997

CEN

Building hardware - Door

coordinator devices Requirements and test methods
EN 1158:1997/A1:2002

Note 3

EN 1158:1997/A1:2002/AC:2006
EN 1168:2005+A3:2011
CEN

Precast concrete products Hollow core slabs

EN 1279-5:2005+A2:2010

CEN

Glass in building - Insulating glass

units - Part 5: Evaluation of
conformity
EN 1304:2005

CEN

Clay roofing tiles and fittings Product definitions and

specifications
EN 1317-5:2007+A2:2012

CEN

Road restraint systems - Part 5:

Product requirements and
evaluation of conformity for
vehicle restraint systems
EN 13175:2007+A2:2012/AC:2012

EN 13175:2007+A1:2008

EN 1319:2009
CEN

Domestic gas-fired forced

convection air heaters for space
heating, with fan-assisted burners
not exceeding a net heat input of
70 kW
EN 1337-3:2005

CEN

Structural bearings - Part 3:

Elastomeric bearings
EN 1337-4:2004

CEN

EN 1337-5:2005
CEN

Structural bearings - Part 5: Pot

bearings

EN 1337-6:2004
CEN

01/02/2005

01/02/2006

01/12/2004

01/06/2005

01/01/2009

01/01/2010

Concrete paving blocks Requirements and test methods

01/03/2004

01/03/2005

EN 1338:2003/AC:2006

01/01/2007

01/01/2007

Concrete paving flags Requirements and test methods

01/03/2004

01/03/2005

EN 1339:2003/AC:2006

01/01/2007

01/01/2007

Concrete kerb units Requirements and test methods

01/02/2004

01/02/2005

EN 1340:2003/AC:2006

01/01/2007

01/01/2007

EN 1341:2001

01/09/2013

01/09/2013

EN 1342:2001

01/09/2013

01/09/2013

EN 1343:2001

01/09/2013

01/09/2013

01/01/2003

01/01/2004

01/11/2012

01/11/2012

Structural bearings - Part 6:

Rocker bearings
EN 1337-7:2004

CEN

Structural bearings - Part 7:

Spherical and cylindrical PTFE
bearings

EN 1337-7:2000

EN 1337-8:2007
CEN

Structural bearings - Part 8:

Guide Bearings and Restraint
Bearings
EN 1338:2003

CEN

EN 1339:2003
CEN

EN 1340:2003
CEN

EN 1341:2012
CEN

Slabs of natural stone for external

paving - Requirements and test
methods
EN 1342:2012

CEN

Setts of natural stone for external

paving - Requirements and test
methods
EN 1343:2012

CEN

Kerbs of natural stone for external

paving - Requirements and test
methods
EN 1344:2002

CEN

Clay pavers - Requirements and

test methods

CEN

EN 1423:2012
Road marking materials - Drop on
materials - Glass beads, antiskid

EN 1423:1997

aggregates and mixtures of the

two
EN 1423:2012/AC:2013 (new)

01/07/2013

01/07/2013

01/08/2003

01/08/2004

Note 3

01/01/2006

01/01/2006

EN 1457:1999

01/11/2012

01/11/2013

EN 1457:1999

01/11/2012

01/11/2013

EN 1463-1:1997

01/01/2010

01/01/2011

01/07/2005

01/07/2006

01/09/2005

01/01/2009

01/10/2006

01/01/2009

01/09/2005

01/01/2009

EN 1433:2002

CEN

Drainage channels for vehicular

and pedestrian areas Classification, design and testing
requirements, marking and
evaluation of conformity
EN 1433:2002/A1:2005
EN 1457-1:2012

CEN

Chimneys - Clay/ceramic flue

liners - Part 1: Flue liners
operating under dry conditions Requirements and test methods
EN 1457-2:2012

CEN

Chimneys - Clay/ceramic flue

liners - Part 2: Flue liners
operating under wet conditions Requirements and test methods
EN 1463-1:2009

CEN

Road marking materials Retroreflecting road studs - Part

1: Initial performance
requirements
EN 1469:2004

CEN

Natural stone products - Slabs for

cladding - Requirements
EN 1504-2:2004

CEN

Products and systems for the

protection and repair of concrete
structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 2:
Surface protection systems for
concrete
EN 1504-3:2005

CEN

CEN

Products and systems for the

protection and repair of concrete
structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 3:
Structural and non-structural
repair
EN 1504-4:2004
Products and systems for the

protection and repair of concrete

structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 4:
Structural bonding
EN 1504-5:2004

CEN

Products and systems for the

protection and repair of concrete
structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 5:
Concrete injection

01/10/2005

01/01/2009

01/06/2007

01/01/2009

01/06/2007

01/01/2009

01/01/2012

01/01/2013

01/09/2005

01/09/2006

01/09/2005

01/09/2006

EN 1504-6:2006

CEN

Products and systems for the

protection and repair of concrete
structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 6:
Anchoring of reinforcing steel bar
EN 1504-7:2006

CEN

Products and systems for the

protection and repair of concrete
structures - Definitions,
requirements, quality control and
evaluation of conformity - Part 7:
Reinforcement corrosion
protection
EN 1520:2011

CEN

Prefabricated reinforced
components of lightweight
aggregate concrete with open
structure with structural or nonstructural reinforcement

EN 1520:2002

EN 1748-1-2:2004
CEN

Glass in building - Special basic

products - Borosilicate glasses Part 1-2: Evaluation of
conformity/Product standard
EN 1748-2-2:2004

CEN

Glass in building - Special basic

products - Glass ceramics - Part
2-2: Evaluation of
conformity/Product standard
EN 1806:2006

CEN

Chimneys - Clay/ceramic flue

blocks for single wall chimneys Requirements and test methods

01/05/2007

01/05/2008

CEN

EN 1825-1:2004

01/09/2005

01/09/2006

Grease separators - Part 1:

Principles of design, performance

and testing, marking and quality
control
EN 1825-1:2004/AC:2006

01/01/2007

01/01/2007

EN 1856-1:2003

01/03/2010

01/03/2011

EN 1856-2:2004

01/03/2010

01/03/2011

EN
1857:2003+A1:2008

01/01/2011

01/01/2012

EN 1858:2008

01/04/2012

01/04/2013

01/09/2005

01/09/2006

01/10/2006

01/10/2009

Concrete pipes and fittings,

unreinforced, steel fibre and
reinforced

01/08/2003

23/11/2004

EN 1916:2002/AC:2008

01/01/2009

01/01/2009

Concrete manholes and inspection

chambers, unreinforced, steel
fibre and reinforced

01/08/2003

23/11/2004

EN 1917:2002/AC:2008

01/01/2009

01/01/2009

EN 1935:2002

01/10/2002

01/12/2003

EN 1856-1:2009
CEN

Chimneys - Requirements for

metal chimneys - Part 1: System
chimney products
EN 1856-2:2009

CEN

Chimneys - Requirements for

metal chimneys - Part 2: Metal
flue liners and connecting flue
pipes
EN 1857:2010

CEN

Chimneys - Components Concrete flue liners

EN 1858:2008+A1:2011

CEN

Chimneys - Components Concrete flue blocks

EN 1863-2:2004

CEN

Glass in building - Heat

strengthened soda lime silicate
glass - Part 2: Evaluation of
conformity/Product standard
EN 1873:2005

CEN

Prefabricated accessories for

roofing - Individual roof lights of
plastics - Product specification
and test methods
EN 1916:2002

CEN

EN 1917:2002
CEN

CEN

Building hardware - Single-axis

hinges - Requirements and test
methods

EN 1935:2002/AC:2003

01/01/2007

01/01/2007

01/09/2005

01/09/2006

01/02/2010

01/02/2011

01/01/2010

01/01/2011

01/02/2007

01/02/2008

01/02/2007

01/02/2008

01/04/2006

01/04/2007

01/04/2006

01/04/2007

01/01/2010

01/01/2011

01/03/2006

01/03/2007

01/04/2006

01/04/2007

EN 10025-1:2004
CEN

Hot rolled products of structural

steels - Part 1: General technical
delivery conditions
EN 10088-4:2009

CEN

Stainless steels - Part 4: Technical

delivery conditions for sheet/plate
and strip of corrosion resisting
steels for construction purposes
EN 10088-5:2009

CEN

Stainless steels - Part 5: Technical

delivery conditions for bars, rods,
wire, sections and bright products
of corrosion resisting steels for
construction purposes
EN 10210-1:2006

CEN

Hot finished structural hollow

sections of non-alloy and fine
grain steels - Part 1: Technical
delivery conditions
EN 10219-1:2006

CEN

Cold formed welded structural

hollow sections of non-alloy and
fine grain steels - Part 1:
Technical delivery conditions
EN 10224:2002

CEN

Non-alloy steel tubes and fittings

for the conveyance of aqueous
liquids including water for human
consumption - Technical delivery
conditions
EN 10224:2002/A1:2005

Note 3

EN 10255:2004+A1:2007
CEN

Non-Alloy steel tubes suitable for

welding and threading - Technical
delivery conditions
EN 10311:2005

CEN

CEN

Joints for the connection of steel

tubes and fittings for the
conveyance of water and other
aqueous liquids
EN 10312:2002
Welded stainless steel tubes for
the conveyance of aqueous liquids
including water for human

consumption - Technical delivery

conditions
EN 10312:2002/A1:2005

Note 3

EN 10340:2007
CEN

Steel castings for structural uses

EN 10340:2007/AC:2008

01/04/2006

01/04/2007

01/01/2010

01/01/2011

01/01/2010

01/01/2010

01/01/2010

01/01/2011

01/04/2013

01/07/2013

01/11/2001

01/11/2002

01/10/2001

01/10/2002

01/10/2001

01/10/2002

01/10/2001

01/10/2002

01/09/2005

01/09/2006

EN 10343:2009
CEN

Steels for quenching and

tempering for construction
purposes - Technical delivery
conditions
EN 12004:2007+A1:2012

CEN

Adhesives for tiles Requirements, evaluation of

conformity, classification and
designation

EN 12004:2007

EN 12050-1:2001
CEN

Wastewater lifting plants for

buildings and sites - Principles of
construction and testing - Part 1:
Lifting plants for wastewater
containing faecal matter
EN 12050-2:2000

CEN

Wastewater lifting plants for

buildings and sites - Principles of
construction and testing - Part 2:
Lifting plants for faecal-free
wastewater
EN 12050-3:2000

CEN

Wastewater lifting plants for

buildings and sites - Principles of
construction and testing - Part 3:
Lifting plants for wastewater
containing faecal matter for
limited applications
EN 12050-4:2000

CEN

Wastewater lifting plants for

buildings and sites - Principles of
construction and testing - Part 4:
Non-return valves for faecal-free
wastewater and wastewater
containing faecal matter
EN 12057:2004

CEN

Natural stone products - Modular

tiles - Requirements

EN 12058:2004
CEN

01/09/2005

01/09/2006

01/02/2004

01/05/2006

01/02/2004

01/05/2006

01/01/2004

01/09/2005

01/05/2005

01/08/2007

EN 12094-5:2000

01/02/2007

01/05/2009

EN 12094-6:2000

01/02/2007

01/05/2009

01/10/2001

01/04/2004

Natural stone products - Slabs for

floors and stairs - Requirements
EN 12094-1:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 1: Requirements
and test methods for electrical
automatic control and delay
devices
EN 12094-2:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 2: Requirements
and test methods for nonelectrical automatic control and
delay devices
EN 12094-3:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 3: Requirements
and test methods for manual
triggering and stop devices
EN 12094-4:2004

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 4: Requirements
and test methods for container
valve assemblies and their
actuators
EN 12094-5:2006

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 5: Requirements
and test methods for high and low
pressure selector valves and their
actuators
EN 12094-6:2006

CEN

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 6: Requirements
and test methods for nonelectrical disable devices
EN 12094-7:2000
Fixed firefighting systems Components for gas extinguishing
systems - Part 7: Requirements
and test methods for nozzles for
CO2 systems

EN 12094-7:2000/A1:2005

Note 3

01/11/2005

01/11/2006

01/02/2007

01/05/2009

01/01/2004

01/09/2005

01/02/2004

01/05/2006

01/01/2004

01/09/2005

01/01/2004

01/09/2005

01/01/2002

01/04/2004

01/01/2010

01/01/2010

01/06/2006

01/09/2008

01/12/2006

01/09/2008

01/04/2004

01/09/2006

EN 12094-8:2006
CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 8: Requirements
and test methods for connectors
EN 12094-9:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 9: Requirements
and test methods for special fire
detectors
EN 12094-10:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 10: Requirements
and test methods for pressure
gauges and pressure switches
EN 12094-11:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 11: Requirements
and test methods for mechanical
weighing devices
EN 12094-12:2003

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 12: Requirements
and test methods for pneumatic
alarm devices
EN 12094-13:2001

CEN

Fixed firefighting systems Components for gas extinguishing

systems - Part 13: Requirements
and test methods for check valves
and non-return valves
EN 12094-13:2001/AC:2002
EN 12101-1:2005

CEN

Smoke and heat control systems Part 1: Specification for smoke

barriers
EN 12101-1:2005/A1:2006

Note 3

EN 12101-2:2003
CEN

Smoke and heat control systems Part 2: Specification for natural

smoke and heat exhaust

ventilators
EN 12101-3:2002

CEN

Smoke and heat control systems Part 3: Specification for powered

smoke and heat exhaust
ventilators

01/04/2004

01/04/2005

01/01/2006

01/01/2006

Smoke and heat control systems Part 6: Specification for pressure

differential systems - Kits

01/04/2006

01/04/2007

EN 12101-6:2005/AC:2006

01/01/2007

01/01/2007

01/02/2012

01/02/2013

01/02/2012

01/02/2013

Smoke and heat control systems Part 10: Power supplies

01/10/2006

01/05/2012

EN 12101-10:2005/AC:2007

01/01/2008

01/01/2008

01/09/2005

01/09/2006

01/12/2004

01/06/2006

01/06/2006

01/06/2006

01/04/2002

01/09/2005

EN 12101-3:2002/AC:2005
EN 12101-6:2005
CEN

EN 12101-7:2011
CEN

Smoke and heat control systems Part 7: Smoke duct sections

EN 12101-8:2011

CEN

Smoke and heat control systems Part 8: Smoke control dampers

EN 12101-10:2005

CEN

EN 12150-2:2004
CEN

Glass in building - Thermally

toughened soda lime silicate
safety glass - Part 2: Evaluation
of conformity/Product standard
EN 12209:2003

CEN

Building hardware - Locks and

latches - Mechanically operated
locks, latches and locking plates Requirements and test methods
EN 12209:2003/AC:2005

CEN

EN 12259-1:1999 + A1:2001
Fixed firefighting systems Components for sprinkler and
water spray systems - Part 1:
Sprinklers
EN 12259-1:1999 +
A1:2001/A2:2004

Note 3

01/03/2005

01/03/2006

EN 12259-1:1999 +

Note 3

01/11/2006

01/11/2007

A1:2001/A3:2006
EN 12259-2:1999
Fixed firefighting systems Components for sprinkler and
water spray systems - Part 2: Wet
alarm valve assemblies
CEN

01/01/2002

01/08/2007

EN 12259-2:1999/A1:2001

Note 3

01/01/2002

01/08/2007

EN 12259-2:1999/A2:2005

Note 3

01/09/2006

01/08/2007

01/06/2005

01/06/2005

01/01/2002

01/08/2007

EN 12259-2:1999/AC:2002
EN 12259-3:2000

CEN

Fixed firefighting systems Components for automatic

sprinkler and water spray systems
- Part 3: Dry alarm valve
assemblies
EN 12259-3:2000/A1:2001

Note 3

01/01/2002

01/08/2007

EN 12259-3:2000/A2:2005

Note 3

01/09/2006

01/08/2007

01/01/2002

01/04/2004

01/01/2002

01/04/2004

01/07/2003

01/09/2005

01/01/2008

01/01/2011

01/01/2009

01/01/2011

01/01/2006

01/01/2008

01/05/2005

01/05/2008

EN 12259-4:2000

CEN

Fixed firefighting systems Components for sprinkler and

water spray systems - Part 4:
Water motor alarms
EN 12259-4:2000/A1:2001

Note 3

EN 12259-5:2002
CEN

CEN

CEN

Fixed firefighting systems Components for sprinkler and

water spray systems - Part 5:
Water flow detectors
EN 12271:2006
Surface dressing - Requirements
EN 12273:2008
Slurry surfacing - Requirements
EN 12285-2:2005

CEN

CEN

Workshop fabricated steel tanks Part 2: Horizontal cylindrical

single skin and double skin tanks
for the aboveground storage of
flammable and non-flammable
water polluting liquids
EN 12326-1:2004
Slate and stone products for

discontinuous roofing and

cladding - Part 1: Product
specification
EN 12337-2:2004
CEN

Glass in building - Chemically

strengthened soda lime silicate
glass - Part 2: Evaluation of
conformity/Product standard

01/09/2005

01/09/2006

01/02/2007

01/02/2008

01/02/2007

01/02/2008

01/10/2003

01/10/2004

EN 12446:2003

01/04/2012

01/04/2013

EN 12467:2004

01/07/2013

01/07/2013

01/12/2004

01/12/2005

Note 3

01/12/2004

01/12/2005

EN 12566-3:2005

01/11/2009

01/11/2010

01/01/2009

01/01/2010

01/11/2013

01/11/2014

EN 12352:2006
CEN

Traffic control equipment Warning and safety light devices

EN 12368:2006

CEN

Traffic control equipment - Signal

heads
EN 12380:2002

CEN

Air admittance valves for drainage

systems - Requirements, tests
methods and evaluation of
conformity
EN 12446:2011

CEN

Chimneys - Components Concrete outer wall elements

EN 12467:2012

CEN

Fibre-cement flat sheets - Product

specification and test methods
EN 12566-1:2000

CEN

Small wastewater treatment

systems for up to 50 PT - Part 1:
Prefabricated septic tanks
EN 12566-1:2000/A1:2003
EN 12566-3:2005+A1:2009

CEN

Small wastewater treatment

systems for up to 50 PT - Part 3:
Packaged and/or site assembled
domestic wastewater treatment
plants
EN 12566-4:2007

CEN

CEN

Small wastewater treatment

systems for up to 50 PT - Part 4:
Septic tanks assembled in situ
from prefabricated kits
EN 12566-6:2013 (new)
Small wastewater treatment
systems for up to 50 PT - Part 6:

Prefabricated treatment units for

septic tank effluent
EN 12591:2009
CEN

CEN

Bitumen and bituminous binders Specifications for paving grade

bitumens

01/01/2010

01/01/2011

01/01/2009

01/01/2010

01/02/2004

01/02/2006

01/02/2004

01/02/2006

01/01/2009

01/01/2010

EN 12764:2004

01/01/2009

01/01/2010

EN 12794:2005

01/02/2008

01/02/2009

01/08/2009

01/08/2009

01/07/2005

01/07/2007

01/07/2005

01/07/2007

EN 12809:2001/AC:2006

01/01/2008

01/01/2008

EN
12809:2001/A1:2004/AC:2007

01/01/2008

01/01/2008

01/07/2005

01/07/2007

01/07/2005

01/07/2007

01/01/2007

01/01/2007

EN 12620:2002+A1:2008
Aggregates for concrete

EN 12620:2002

EN 12676-1:2000
CEN

Anti-glare systems for roads Part 1: Performance and

characteristics
EN 12676-1:2000/A1:2003

Note 3

EN 12737:2004+A1:2007
CEN

Precast concrete products - Floor

slats for livestock
EN 12764:2004+A1:2008

CEN

Sanitary appliances - Specification

for whirlpool baths
EN 12794:2005+A1:2007

CEN

Precast concrete products Foundation piles

EN
12794:2005+A1:2007/AC:2008
EN 12809:2001
Residential independent boilers
fired by solid fuel - Nominal heat
output up to 50 kW Requirements and test methods

CEN

CEN

EN 12809:2001/A1:2004

Note 3

EN 12815:2001
Residential cookers fired by solid
fuel - Requirements and test
methods
EN 12815:2001/A1:2004
EN 12815:2001/AC:2006

Note 3

EN
12815:2001/A1:2004/AC:2007

01/01/2008

01/01/2008

01/10/2012

01/10/2013

01/09/2005

01/09/2007

01/12/2011

01/12/2012

Gypsum based adhesives for

gypsum blocks - Definitions,
requirements and test methods

01/04/2002

01/04/2003

EN 12860:2001/AC:2002

01/01/2010

01/01/2010

01/03/2006

01/03/2007

01/01/2007

01/01/2007

01/01/2009

01/01/2013

01/01/2009

01/01/2013

01/01/2009

01/01/2013

01/09/2005

01/09/2006

01/08/2010

01/08/2010

EN 12839:2012
CEN

Precast concrete products Elements for fences

EN 12839:2001

EN 12843:2004
CEN

Precast concrete products - Masts

and poles
EN 12859:2011

CEN

Gypsum blocks - Definitions,

requirements and test methods

EN 12859:2008

EN 12860:2001
CEN

EN 12878:2005

CEN

Pigments for the colouring of

building materials based on
cement and/or lime Specifications and methods of test
EN 12878:2005/AC:2006
EN 12899-1:2007

CEN

Fixed, vertical road traffic signs Part 1: Fixed signs

EN 12899-2:2007

CEN

Fixed, vertical road traffic signs Part 2: Transilluminated traffic

bollards (TTB)
EN 12899-3:2007

CEN

Fixed, vertical road traffic signs Part 3: Delineator posts and

retroreflectors
EN 12951:2004

CEN

Prefabricated accessories for

roofing - Permanently fixed roof
ladders - Product specification
and test methods
EN 12966-1:2005+A1:2009

CEN

Road vertical signs - Variable

message traffic signs - Part 1:
Product standard

EN 12966-1:2005

EN 13024-2:2004
CEN

Glass in building - Thermally

toughened borosilicate safety
glass - Part 2: Evaluation of
conformity/Product standard

01/09/2005

01/09/2006

01/07/2003

01/06/2004

01/06/2006

01/06/2006

Lightweight aggregates - Part 1:

Lightweight aggregates for
concrete, mortar and grout

01/03/2003

01/06/2004

EN 13055-1:2002/AC:2004

01/01/2010

01/01/2010

01/05/2005

01/05/2006

EN 13063-1:2005

01/05/2008

01/05/2009

EN 13063-2:2005

01/05/2008

01/05/2009

01/05/2008

01/05/2009

EN 13043:2002

CEN

Aggregates for bituminous

mixtures and surface treatments
for roads, airfields and other
trafficked areas
EN 13043:2002/AC:2004
EN 13055-1:2002

CEN

EN 13055-2:2004
CEN

Lightweight aggregates - Part 2:

Lightweight aggregates for
bituminous mixtures and surface
treatments and for unbound and
bound applications
EN 13063-1:2005+A1:2007

CEN

Chimneys - System chimneys

with clay/ceramic flue liners - Part
1: Requirements and test
methods for sootfire resistance
EN 13063-2:2005+A1:2007

CEN

Chimneys - System chimneys

with clay/ceramic flue liners - Part
2: Requirements and test
methods under wet conditions
EN 13063-3:2007

CEN

Chimneys - System chimneys

with clay/ceramic flue liners - Part
3: Requirements and test
methods for air flue system
chimneys
EN 13069:2005

CEN

Chimneys - Clay/ceramic outer

walls for system chimneys Requirements and test methods

01/05/2006

01/05/2007

CEN

EN 13084-5:2005

01/04/2006

01/04/2007

Free-standing chimneys - Part 5:

Material for brick liners - Product
specifications

EN 13084-5:2005/AC:2006

01/01/2007

01/01/2007

01/09/2013

01/09/2013

01/08/2003

01/08/2004

Bituminous mixtures - Material

specifications - Part 1: Asphalt
Concrete

01/03/2007

01/03/2008

EN 13108-1:2006/AC:2008

01/01/2009

01/01/2009

Bituminous mixtures - Material

specifications - Part 2: Asphalt
Concrete for very thin layers

01/03/2007

01/03/2008

EN 13108-2:2006/AC:2008

01/01/2009

01/01/2009

Bituminous mixtures - Material

specifications - Part 3: Soft
Asphalt

01/03/2007

01/03/2008

EN 13108-3:2006/AC:2008

01/01/2009

01/01/2009

Bituminous mixtures - Material

specifications - Part 4: Hot Rolled
Asphalt

01/03/2007

01/03/2008

EN 13108-4:2006/AC:2008

01/01/2009

01/01/2009

Bituminous mixtures - Material

specifications - Part 5: Stone
Mastic Asphalt

01/03/2007

01/03/2008

EN 13108-5:2006/AC:2008

01/01/2009

01/01/2009

EN 13108-6:2006

01/03/2007

01/03/2008

EN 13084-7:2012
CEN

Free-standing chimneys - Part 7:

Product specifications of
cylindrical steel fabrications for
use in single wall steel chimneys
and steel liners

EN 13084-7:2005

EN 13101:2002
CEN

Steps for underground man entry

chambers - Requirements,
marking, testing and evaluation of
conformity
EN 13108-1:2006

CEN

EN 13108-2:2006
CEN

EN 13108-3:2006
CEN

EN 13108-4:2006
CEN

EN 13108-5:2006
CEN

CEN

Bituminous mixtures - Material

specifications - Part 6: Mastic
Asphalt

EN 13108-6:2006/AC:2008

01/01/2009

01/01/2009

Bituminous mixtures - Material

specifications - Part 7: Porous
Asphalt

01/03/2007

01/03/2008

EN 13108-7:2006/AC:2008

01/01/2009

01/01/2009

01/03/2003

01/06/2004

01/01/2010

01/01/2010

01/03/2004

01/03/2005

EN 13162:2008

01/09/2013

01/09/2013

EN 13163:2008

01/09/2013

01/09/2013

EN 13164:2008

01/09/2013

01/09/2013

EN 13165:2008

01/09/2013

01/09/2013

EN 13166:2008

01/09/2013

01/09/2013

EN 13167:2008

01/09/2013

01/09/2013

EN 13168:2008

01/09/2013

01/09/2013

EN 13108-7:2006
CEN

EN 13139:2002
CEN

Aggregates for mortar

EN 13139:2002/AC:2004
EN 13160-1:2003

CEN

Leak detection systems - Part 1:

General principles
EN 13162:2012

CEN

Thermal insulation products for

buildings - Factory made mineral
wool (MW) products Specification
EN 13163:2012

CEN

Thermal insulation products for

buildings - Factory made
expanded polystyrene (EPS)
products - Specification
EN 13164:2012

CEN

Thermal insulation products for

buildings - Factory made extruded
polystyrene foam (XPS) products
- Specification
EN 13165:2012

CEN

Thermal insulation products for

buildings - Factory made rigid
polyurethane foam (PU) products
- Specification
EN 13166:2012

CEN

Thermal insulation products for

buildings - Factory made phenolic
foam (PF) products - Specification
EN 13167:2012

CEN

CEN

Thermal insulation products for

buildings - Factory made cellular
glass (CG) products Specification
EN 13168:2012
Thermal insulation products for

buildings - Factory made wood

wool (WW) products Specification
EN 13169:2012
CEN

Thermal insulation products for

buildings - Factory made
expanded perlite board (EPB)
products - Specification

EN 13169:2008

01/09/2013

01/09/2013

EN 13170:2008

01/09/2013

01/09/2013

EN 13171:2008

01/09/2013

01/09/2013

EN
13224:2004+A1:2007

01/08/2012

01/08/2013

Precast concrete products - Linear

structural elements

01/09/2005

01/09/2007

EN 13225:2004/AC:2006

01/01/2008

01/01/2008

01/07/2005

01/07/2007

EN 13170:2012
CEN

Thermal insulation products for

buildings - Factory made products
of expanded cork (ICB) Specification
EN 13171:2012

CEN

Thermal insulation products for

buildings - Factory made wood
fibre (WF) products - Specification
EN 13224:2011

CEN

Precast concrete products Ribbed floor elements

EN 13225:2004

CEN

EN 13229:2001
Inset appliances including open
fires fired by solid fuels Requirements and test methods
EN 13229:2001/A1:2003

Note 3

01/06/2006

01/06/2007

EN 13229:2001/A2:2004

Note 3

01/07/2005

01/07/2007

EN 13229:2001/AC:2006

01/07/2007

01/07/2007

EN
13229:2001/A2:2004/AC:2007

01/01/2008

01/01/2008

01/07/2005

01/07/2007

01/07/2005

01/07/2007

01/01/2007

01/01/2007

CEN

CEN

EN 13240:2001
Roomheaters fired by solid fuel Requirements and test methods
EN 13240:2001/A2:2004
EN 13240:2001/AC:2006

Note 3

EN
13240:2001/A2:2004/AC:2007

01/01/2008

01/01/2008

01/01/2009

01/01/2010

01/07/2010

01/07/2012

01/07/2010

01/07/2010

01/10/2001

01/10/2002

01/11/2005

01/11/2006

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/10/2001

01/10/2002

EN 13242:2002+A1:2007
CEN

Aggregates for unbound and

hydraulically bound materials for
use in civil engineering work and
road construction

EN 13242:2002

EN 13245-2:2008

CEN

Plastics - Unplasticized poly(vinyl

chloride) (PVC-U) profiles for
building applications - Part 2:
PVC-U profiles and PVC-UE
profiles for internal and external
wall and ceiling finishes
EN 13245-2:2008/AC:2009
EN 13249:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in the
construction of roads and other
trafficked areas (excluding
railways and asphalt inclusion)
EN 13249:2000/A1:2005

Note 3

EN 13250:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in the
construction of railways
EN 13250:2000/A1:2005

Note 3

EN 13251:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in earthworks,
foundations and retaining
structures
EN 13251:2000/A1:2005

Note 3

EN 13252:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in drainage
systems
EN 13252:2000/A1:2005

CEN

EN 13253:2000
Geotextiles and geotextile-related

Note 3

products - Characteristics
required for use in erosion control
works (coastal protection, bank
revetments)
EN 13253:2000/A1:2005

Note 3

01/06/2006

01/06/2007

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/06/2006

01/06/2006

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/06/2006

01/06/2006

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/06/2006

01/06/2006

01/10/2001

01/10/2002

01/06/2006

01/06/2007

01/06/2006

01/06/2006

01/01/2010

01/01/2011

01/10/2001

01/10/2002

EN 13254:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in the
construction of reservoirs and
dams
EN 13254:2000/A1:2005

Note 3

EN 13254:2000/AC:2003
EN 13255:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in the
construction of canals
EN 13255:2000/A1:2005

Note 3

EN 13255:2000/AC:2003
EN 13256:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in the
construction of tunnels and
underground structures
EN 13256:2000/A1:2005

Note 3

EN 13256:2000/AC:2003
EN 13257:2000

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in solid waste
disposals
EN 13257:2000/A1:2005

Note 3

EN 13257:2000/AC:2003
EN 13263-1:2005+A1:2009
CEN

Silica fume for concrete - Part 1:

Definitions, requirements and
conformity criteria

CEN

EN 13265:2000

EN 13263-1:2005

Geotextiles and geotextile-related

products - Characteristics
required for use in liquid waste
containment projects
EN 13265:2000/A1:2005

Note 3

01/06/2006

01/06/2007

01/06/2006

01/06/2006

01/10/2009

01/10/2010

01/11/2013

01/11/2014

01/02/2004

01/02/2006

01/10/2011

01/10/2011

01/09/2005

01/09/2006

01/06/2007

01/06/2008

01/02/2006

01/02/2007

Armourstone - Part 1:
Specification

01/03/2003

01/06/2004

EN 13383-1:2002/AC:2004

01/01/2010

01/01/2010

EN 13407:2006

01/01/2008

01/01/2009

EN 13265:2000/AC:2003
EN 13279-1:2008
CEN

Gypsum binders and gypsum

plasters - Part 1: Definitions and
requirements

EN 13279-1:2005

EN 13282-1:2013 (new)
CEN

Hydraulic road binders - Part 1:

Rapid hardening hydraulic road
binders - Composition,
specifications and conformity
criteria
EN 13310:2003

CEN

Kitchen sinks - Functional

requirements and test methods
EN 13341:2005+A1:2011

CEN

Static thermoplastic tanks for

above ground storage of domestic
heating oils, kerosene and diesel
fuels - Blow moulded and
rotationally moulded polyethylene
tanks and rotationally moulded
tanks made of anionically
polymerized polyamide 6 Requirements and test methods

EN 13341:2005

EN 13361:2004

CEN

Geosynthetic barriers Characteristics required for use in

the construction of reservoirs and
dams
EN 13361:2004/A1:2006

Note 3

EN 13362:2005
CEN

Geosynthetic Barriers Characteristics required for use in

the construction of canals
EN 13383-1:2002

CEN

CEN

Wall-hung urinals - Functional

requirements and test methods
EN 13450:2002
CEN

Aggregates for railway ballast

EN 13450:2002/AC:2004

01/10/2003

01/06/2004

01/01/2007

01/01/2007

01/07/2005

01/07/2006

01/10/2005

01/10/2006

01/09/2005

01/09/2006

01/06/2007

01/06/2008

01/09/2005

01/09/2006

01/06/2007

01/06/2008

01/03/2006

01/03/2007

01/08/2003

01/08/2004

EN 13454-1:2004
CEN

Binders, composite binders and

factory made mixtures for floor
screeds based on calcium sulfate
- Part 1: Definitions and
requirements
EN 13479:2004

CEN

Welding consumables - General

product standard for filler metals
and fluxes for fusion welding of
metallic materials
EN 13491:2004

CEN

Geosynthetic barriers Characteristics required for use as

a fluid barrier in the construction
of tunnels and underground
structures
EN 13491:2004/A1:2006

Note 3

EN 13492:2004

CEN

Geosynthetic barriers Characteristics required for use in

the construction of liquid waste
disposal sites, transfer stations or
secondary containment
EN 13492:2004/A1:2006

Note 3

EN 13493:2005
CEN

Geosynthetic barriers Characteristics required for use in

the construction of solid waste
storage and disposal sites
EN 13502:2002

CEN

Chimneys - Requirements and

test methods for clay/ceramic flue
terminals
EN 13564-1:2002

CEN

Anti-flooding devices for buildings

- Part 1: Requirements

01/05/2003

01/05/2004

CEN

EN 13616:2004

01/05/2005

01/05/2006

Overfill prevention devices for

static tanks for liquid petroleum
fuels
EN 13616:2004/AC:2006

01/06/2006

01/06/2006

01/03/2006

01/03/2007

01/03/2006

01/03/2007

EN 13693:2004

01/05/2010

01/05/2011

EN 13707:2004

01/04/2010

01/10/2010

EN
13747:2005+A1:2008

01/01/2011

01/01/2011

01/06/2005

01/10/2006

01/04/2006

01/10/2006

01/06/2005

01/06/2005

01/04/2005

01/04/2006

01/01/2010

01/01/2011

EN 13658-1:2005
CEN

Metal lath and beads - Definitions,

requirements and test methods Part 1: Internal plastering
EN 13658-2:2005

CEN

Metal lath and beads - Definitions,

requirements and test methods Part 2: External rendering
EN 13693:2004+A1:2009

CEN

Precast concrete products Special roof elements

EN 13707:2004+A2:2009

CEN

Flexible sheets for waterproofing Reinforced bitumen sheets for

roof waterproofing - Definitions
and characteristics
EN 13747:2005+A2:2010

CEN

Precast concrete products - Floor

plates for floor systems
EN 13748-1:2004
Terrazzo tiles - Part 1: Terrazzo
tiles for internal use

CEN
EN 13748-1:2004/A1:2005
EN 13748-1:2004/AC:2005

Note 3

EN 13748-2:2004
CEN

Terrazzo tiles - Part 2: Terrazzo

tiles for external use
EN 13808:2005

CEN

Bitumen and bituminous binders Framework for specifying cationic

bituminous emulsions
EN 13813:2002

CEN

Screed material and floor screeds

- Screed material - Properties and
requirements

01/08/2003

01/08/2004

CEN

EN 13815:2006

01/06/2007

01/06/2008

Fibrous gypsum plaster casts Definitions, requirements and test

methods

CEN

EN 13830:2003

01/12/2004

01/12/2005

EN 138591:2005+A1:2008

01/04/2011

01/04/2012

EN 138592:2004+A1:2008

01/04/2011

01/04/2012

01/09/2005

01/09/2006

01/06/2008

01/06/2009

Bitumen and bituminous binders Specifications for hard paving

grade bitumens

01/01/2010

01/01/2011

EN 13924:2006/AC:2006

01/01/2010

01/01/2010

01/09/2006

01/09/2007

01/10/2013

01/10/2013

Jointing materials for gypsum

plasterboards - Definitions,
requirements and test methods

01/03/2006

01/03/2007

EN 13963:2005/AC:2006

01/01/2007

01/01/2007

EN 13964:2004

01/01/2005

01/07/2007

Curtain walling - Product standard

EN 13859-1:2010

CEN

Flexible sheets for waterproofing Definitions and characteristics of

underlays - Part 1: Underlays for
discontinuous roofing
EN 13859-2:2010

CEN

Flexible sheets for waterproofing Definitions and characteristics of

underlays - Part 2: Underlays for
walls
EN 13877-3:2004

CEN

Concrete pavements - Part 3:

Specifications for dowels to be
used in concrete pavements
EN 13915:2007

CEN

Prefabricated gypsum
plasterboard panels with a cellular
paperboard core - Definitions,
requirements and test methods
EN 13924:2006

CEN

EN 13950:2005
CEN

Gypsum plasterboard
thermal/acoustic insulation
composite panels - Definitions,
requirements and test methods
EN 13956:2012

CEN

Flexible sheets for waterproofing Plastic and rubber sheets for roof
waterproofing - Definitions and
characteristics

EN 13956:2005

EN 13963:2005
CEN

CEN

Suspended ceilings Requirements and test methods

EN 13964:2004/A1:2006

Note 3

01/01/2008

01/01/2009

EN 13967:2004

01/03/2013

01/07/2013

01/09/2005

01/09/2006

01/01/2008

01/01/2009

01/09/2005

01/09/2006

01/01/2008

01/01/2009

01/03/2006

01/03/2008

EN 13984:2004

01/11/2013

01/11/2013

EN 13986:2002

01/06/2005

01/06/2006

01/12/2004

01/12/2005

01/01/2011

01/01/2012

EN 13967:2012
CEN

Flexible sheets for waterproofing Plastic and rubber damp proof

sheets including plastic and
rubber basement tanking sheet Definitions and characteristics
EN 13969:2004

CEN

Flexible sheets for waterproofing Bitumen damp proof sheets

including bitumen basement
tanking sheets - Definitions and
characteristics
EN 13969:2004/A1:2006

Note 3

EN 13970:2004

CEN

Flexible sheets for waterproofing Bitumen water vapour control

layers - Definitions and
characteristics
EN 13970:2004/A1:2006

Note 3

EN 13978-1:2005

CEN

Precast concrete products Precast concrete garages - Part 1:

Requirements for reinforced
garages monolithic or consisting
of single sections with room
dimensions
EN 13984:2013 (new)

CEN

Flexible sheets for waterproofing Plastic and rubber vapour control

layers - Definitions and
characteristics
EN 13986:2004

CEN

Wood-based panels for use in

construction - Characteristics,
evaluation of conformity and
marking
EN 14016-1:2004

CEN

CEN

Binders for magnesite screeds Caustic magnesia and magnesium

chloride - Part 1: Definitions,
requirements
EN 14023:2010

Bitumen and bituminous binders Specification framework for

polymer modified bitumens
EN 14037-1:2003
CEN

Ceiling mounted radiant panels

supplied with water at
temperature below 120 C - Part
1: Technical specifications and
requirements

01/02/2004

01/02/2005

Resilient, textile and laminate

floor coverings - Essential
characteristics

01/01/2006

01/01/2007

EN 14041:2004/AC:2006

01/01/2007

01/01/2007

01/09/2011

01/09/2012

01/06/2005

01/06/2006

01/01/2008

01/01/2008

01/12/2010

01/12/2011

01/04/2006

01/12/2012

01/10/2011

31/12/2011

01/09/2005

01/09/2006

01/03/2006

01/03/2007

EN 14041:2004
CEN

CEN

EN 14055:2010
WC and urinal flushing cisterns
EN 14063-1:2004

CEN

Thermal insulation products for

buildings - In-situ formed
expanded clay lightweight
aggregate products - Part 1:
Specification for the loose-fill
products before installation
EN 14063-1:2004/AC:2006
EN 14064-1:2010

CEN

Thermal insulation products for

buildings - In-situ formed loosefill mineral wool (MW) products Part 1: Specification for the loosefill products before installation
EN 14080:2005

CEN

Timber structures - Glued

laminated timber - Requirements
EN 14081-1:2005+A1:2011

CEN

Timber structures - Strength

graded structural timber with
rectangular cross section - Part 1:
General requirements

EN 14081-1:2005

EN 14178-2:2004
CEN

CEN

Glass in building - Basic alkaline

earth silicate glass products - Part
2: Evaluation of
conformity/Product standard
EN 14179-2:2005

Glass in building - Heat soaked

thermally toughened soda lime
silicate safety glass - Part 2:
Evaluation of conformity/Product
standard
EN 14188-1:2004
CEN

Joint fillers and sealants - Part 1:

Specifications for hot applied
sealants

01/07/2005

01/01/2007

01/10/2005

01/01/2007

01/11/2006

01/11/2007

01/04/2006

01/04/2007

01/01/2006

01/01/2007

01/01/2007

01/01/2007

01/09/2006

01/09/2007

01/02/2005

01/02/2006

01/09/2011

01/09/2012

Gypsum elements for suspended

ceilings - Definitions,
requirements and test methods

01/04/2007

01/04/2008

EN 14246:2006/AC:2007

01/01/2008

01/01/2008

EN 14188-2:2004
CEN

Joint fillers and sealants - Part 2:

Specifications for cold applied
sealants
EN 14188-3:2006

CEN

Joint fillers and sealants - Part 3:

Specifications for preformed joint
seals
EN 14190:2005

CEN

Gypsum plasterboard products

from reprocessing - Definitions,
requirements and test methods
EN 14195:2005

CEN

Metal framing components for

gypsum plasterboard systems Definitions, requirements and test
methods
EN 14195:2005/AC:2006
EN 14209:2005

CEN

Preformed plasterboard cornices Definitions, requirements and test

methods
EN 14216:2004

CEN

Cement - Composition,
specifications and conformity
criteria for very low heat special
cements
EN 14229:2010

CEN

Structural timber - Wood poles for

overhead lines
EN 14246:2006

CEN

EN 14250:2010
CEN

Timber structures - Product

requirements for prefabricated
structural members assembled
with punched metal plate
fasteners

EN 14250:2004

01/11/2010

01/11/2010

01/03/2006

01/03/2008

EN 14303:2009

01/11/2013

01/11/2013

EN 14304:2009

01/11/2013

01/11/2013

EN 14305:2009

01/11/2013

01/11/2013

EN 14306:2009

01/11/2013

01/11/2013

EN 14307:2009

01/11/2013

01/11/2013

EN 14308:2009

01/11/2013

01/11/2013

EN 14309:2009

01/11/2013

01/11/2013

EN 14296:2005
CEN

Sanitary appliances - Communal

washing troughs
EN 14303:2009+A1:2013 (new)

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
mineral wool (MW) products Specification
EN 14304:2009+A1:2013 (new)

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
flexible elastomeric foam (FEF)
products - Specification
EN 14305:2009+A1:2013 (new)

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
cellular glass (CG) products Specification
EN 14306:2009+A1:2013 (new)

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
calcium silicate (CS) products Specification
EN 14307:2009+A1:2013 (new)

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
extruded polystyrene foam (XPS)
products - Specification
EN 14308:2009+A1:2013 (new)

CEN

CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made rigid
polyurethane foam (PUR) and
polyisocyanurate foam (PIR)
products - Specification
EN 14309:2009+A1:2013 (new)
Thermal insulation products for
building equipment and industrial

installations - Factory made

products of expanded polystyrene
(EPS) - Specification
EN 14313:2009+A1:2013 (new)
CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
polyethylene foam (PEF) products
- Specification

EN 14313:2009

01/11/2013

01/11/2013

EN 14314:2009

01/11/2013

01/11/2013

01/11/2013

01/11/2014

01/06/2005

01/06/2006

01/06/2005

01/06/2006

01/11/2013

01/11/2014

01/11/2013

01/11/2014

EN 14314:2009+A1:2013 (new)
CEN

Thermal insulation products for

building equipment and industrial
installations - Factory made
phenolic foam (PF) products Specification
EN 14315-1:2013 (new)

CEN

Thermal insulating products for

buildings - In-situ formed sprayed
rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam
products - Part 1: Specification
for the rigid foam spray system
before installation
EN 14316-1:2004

CEN

Thermal insulation products for

buildings - In-situ thermal
insulation formed from expanded
perlite (EP) products - Part 1:
Specification for bonded and
loose-fill products before
installation
EN 14317-1:2004

CEN

Thermal insulation products for

buildings - In-situ thermal
insulation formed from exfoliated
vermiculite (EV) products - Part
1: Specification for bonded and
loose-fill products before
installation
EN 14318-1:2013 (new)

CEN

CEN

Thermal insulating products for

buildings - In-situ formed
dispensed rigid polyurethane
(PUR) and polyisocyanurate (PIR)
foam products - Part 1:
Specification for the rigid foam
dispensed system before
installation
EN 14319-1:2013 (new)
Thermal insulating products for
building equipment and industrial

installations - In-situ formed

dispensed rigid polyurethane
(PUR) and polyisocyanurate foam
(PIR) products - Part 1:
Specification for the rigid foam
dispensed system before
installation
EN 14320-1:2013 (new)

CEN

Thermal insulating products for

building equipment and industrial
installations - In-situ formed
sprayed rigid polyurethane (PUR)
and polyisocyanurate foam (PIR)
products - Part 1: Specification
for the rigid foam spray system
before installation

01/11/2013

01/11/2014

01/06/2006

01/06/2007

01/05/2006

01/05/2007

EN 14342:2005

01/03/2009

01/03/2010

EN 14351-1:2006

01/12/2010

01/12/2010

EN 14353:2007

01/11/2010

01/11/2010

01/09/2005

01/09/2006

01/05/2006

01/05/2007

01/05/2006

01/05/2007

EN 14321-2:2005
CEN

CEN

Glass in building - Thermally

toughened alkaline earth silicate
safety glass - Part 2: Evaluation
of conformity/Product standard
EN 14339:2005
Underground fire hydrants
EN 14342:2005+A1:2008

CEN

Wood flooring - Characteristics,

evaluation of conformity and
marking
EN 14351-1:2006+A1:2010

CEN

Windows and doors - Product

standard, performance
characteristics - Part 1: Windows
and external pedestrian doorsets
without resistance to fire and/or
smoke leakage characteristics
EN 14353:2007+A1:2010

CEN

Metal beads and feature profiles

for use with gypsum
plasterboards - Definitions,
requirements and test methods
EN 14374:2004

CEN

CEN

CEN

Timber structures - Structural

laminated veneer lumber Requirements
EN 14384:2005
Pillar fire hydrants
EN 14388:2005
Road traffic noise reducing

devices - Specifications
EN 14388:2005/AC:2008

CEN

01/01/2009

01/01/2009

01/12/2004

01/12/2005

01/01/2006

01/10/2007

EN 14411:2006

01/07/2013

01/07/2014

EN 14428:2004

01/01/2009

01/01/2010

01/03/2006

01/03/2007

01/06/2006

01/06/2006

01/06/2006

01/06/2007

01/09/2006

01/09/2007

Self-supporting double skin metal

faced insulating panels - Factory
made products - Specifications

01/01/2009

01/10/2010

EN 14509:2006/AC:2008

01/01/2009

01/01/2009

01/05/2011

01/05/2012

01/05/2011

01/05/2012

EN 14396:2004
Fixed ladders for manholes
EN 14399-1:2005

CEN

High-strength structural bolting

assemblies for preloading - Part
1: General requirements
EN 14411:2012

CEN

Ceramic tiles - Definitions,

classification, characteristics,
evaluation of conformity and
marking
EN 14428:2004+A1:2008

CEN

Shower enclosures - Functional

requirements and test methods
EN 14449:2005

CEN

Glass in building - Laminated

glass and laminated safety glass Evaluation of conformity/Product
standard
EN 14449:2005/AC:2005
EN 14471:2005

CEN

Chimneys - System chimneys

with plastic flue liners Requirements and test methods
EN 14496:2005

CEN

Gypsum based adhesives for

thermal/acoustic insulation
composite panels and
plasterboards - Definitions,
requirements and test methods
EN 14509:2006

CEN

CEN

CEN

EN 14516:2006+A1:2010
Baths for domestic purposes
EN 14527:2006+A1:2010
Shower trays for domestic

purposes
EN 14528:2007
CEN

01/01/2008

01/01/2009

01/08/2009

01/08/2010

EN 14566:2008

01/05/2010

01/11/2010

EN 14592:2008

01/03/2013

01/07/2013

01/05/2006

01/08/2008

01/08/2009

01/08/2009

Calcium aluminate cement Composition, specifications and

conformity criteria

01/08/2006

01/08/2007

EN 14647:2005/AC:2006

01/01/2008

01/01/2008

01/01/2008

01/01/2009

01/01/2008

01/01/2009

01/10/2010

01/10/2011

Bidets - Functional requirements

and test methods

EN 14528:2005

EN 14545:2008
CEN

Timber structures - Connectors Requirements

EN 14566:2008+A1:2009

CEN

Mechanical fasteners for gypsum

plasterboard systems Definitions, requirements and test
methods
EN 14592:2008+A1:2012

CEN

Timber structures - Dowel-type

fasteners - Requirements
EN 14604:2005

CEN

Smoke alarm devices

EN 14604:2005/AC:2008
EN 14647:2005

CEN

EN 14680:2006
CEN

Adhesives for non-pressure

thermoplastic piping systems Specifications
EN 14688:2006

CEN

Sanitary appliances - Wash basins

- Functional requirements and
test methods
EN 14695:2010

CEN

Flexible sheets for waterproofing Reinforced bitumen sheets for

waterproofing of concrete bridge
decks and other trafficked areas
of concrete - Definitions and
characteristics
EN 14716:2004

CEN

Stretched ceilings - Requirements

and test methods

01/10/2005

01/10/2006

CEN

EN 14782:2006

01/11/2006

01/11/2007

Self-supporting metal sheet for

roofing, external cladding and
internal lining - Product
specification and requirements
EN 14783:2006
CEN

Fully supported metal sheet and

strip for roofing, external cladding
and internal lining - Product
specification and requirements

01/07/2007

01/07/2008

01/01/2010

01/01/2011

01/01/2008

01/01/2009

01/01/2008

01/01/2009

01/01/2008

01/01/2009

01/09/2012

01/09/2013

01/09/2011

01/09/2012

01/06/2007

01/06/2008

EN 14785:2006
CEN

Residential space heating

appliances fired by wood pellets Requirements and test methods
EN 14800:2007

CEN

Corrugated safety metal hose

assemblies for the connection of
domestic appliances using
gaseous fuels
EN 14814:2007

CEN

CEN

Adhesives for thermoplastic

piping systems for fluids under
pressure - Specifications
EN 14843:2007
Precast concrete products - Stairs
EN 14844:2006+A2:2011

CEN

Precast concrete products - Box

culverts

EN
14844:2006+A1:2008

EN 14846:2008
CEN

Building hardware - Locks and

latches - Electromechanically
operated locks and striking plates
- Requirements and test methods
EN 14889-1:2006

CEN

Fibres for concrete - Part 1: Steel

fibres - Definitions, specifications
and conformity
EN 14889-2:2006

CEN

Fibres for concrete - Part 2:

Polymer fibres - Definitions,
specifications and conformity

01/06/2007

01/06/2008

CEN

EN 14891:2012

01/03/2013

01/03/2014

Liquid-applied water impermeable

products for use beneath ceramic
tiling bonded with adhesives Requirements, test methods,
evaluation of conformity,

classification and designation

EN 14891:2012/AC:2012

01/03/2013

01/03/2013

01/02/2007

01/02/2008

01/03/2013

01/07/2013

Solid wood panelling and cladding

- Characteristics, evaluation of
conformity and marking

01/06/2007

01/06/2008

EN 14915:2006/AC:2007

01/01/2008

01/01/2008

01/07/2008

01/07/2009

01/07/2008

01/07/2009

01/08/2009

01/08/2012

01/01/2008

01/01/2009

EN 14904:2006
CEN

Surfaces for sports areas - Indoor

surfaces for multi-sports use Specification
EN 14909:2012

CEN

Flexible sheets for waterproofing Plastic and rubber damp proof

courses - Definitions and
characteristics

EN 14909:2006

EN 14915:2006
CEN

EN 14933:2007
CEN

Thermal insulation and light

weight fill products for civil
engineering applications - Factory
made products of expanded
polystyrene (EPS) - Specification
EN 14934:2007

CEN

Thermal insulation and light

weight fill products for civil
engineering applications - Factory
made products of extruded
polystyrene foam (XPS) Specification
EN 14963:2006

CEN

Roof coverings - Continuous

rooflights of plastics with or
without upstands - Classification,
requirements and test methods
EN 14964:2006

CEN

Rigid underlays for discontinuous

roofing - Definitions and
characteristics
EN 14967:2006

CEN

Flexible sheets for waterproofing Bitumen damp proof courses Definitions and characteristics

01/03/2007

01/03/2008

CEN

EN 14989-1:2007

01/01/2008

01/01/2009

Chimneys - Requirements and

test methods for metal chimneys

and material independent air

supply ducts for roomsealed
heating applications - Part 1:
Vertical air/flue terminals for C6type appliances
EN 14989-2:2007

CEN

Chimneys - Requirements and

test methods for metal chimneys
and material independent air
supply ducts for roomsealed
heating applications - Part 2: Flue
and air supply ducts for room
sealed appliances

01/01/2009

01/01/2010

01/01/2008

01/01/2009

01/04/2013

01/07/2013

01/01/2010

01/01/2011

01/12/2011

01/12/2012

01/12/2011

01/12/2012

01/11/2010

01/11/2011

01/01/2008

01/10/2009

01/12/2012

01/12/2012

01/01/2009

01/01/2010

EN 14991:2007
CEN

Precast concrete products Foundation elements

EN 14992:2007+A1:2012

CEN

Precast concrete products - Wall

elements

EN 14992:2007

EN 15037-1:2008
CEN

Precast concrete products Beam-and-block floor systems Part 1: Beams

EN 15037-2:2009+A1:2011

CEN

Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks

EN 15037-3:2009+A1:2011

CEN

Precast concrete products Beam-and-block floor systems Part 3: Clay blocks

EN 15037-4:2010

CEN

Precast concrete products Beam-and-block floor systems Part 4: Expanded polystyrene

blocks
EN 15048-1:2007

CEN

Non-preloaded structural bolting

assemblies - Part 1: General
requirements
EN 15050:2007+A1:2012

CEN

Precast concrete products Bridge elements

CEN

EN 15069:2008
Safety gas connection valves for
metal hose assemblies used for

EN 15050:2007

the connection of domestic

appliances using gaseous fuel
EN 15088:2005
CEN

Aluminium and aluminium alloys Structural products for

construction works - Technical
conditions for inspection and
delivery

01/10/2006

01/10/2007

01/07/2012

01/07/2012

01/08/2010

01/08/2011

01/01/2008

01/01/2009

01/01/2008

01/01/2010

01/01/2010

01/01/2011

01/04/2010

01/04/2011

01/04/2010

01/04/2011

01/01/2011

01/01/2011

EN 15283-1:2008

01/06/2010

01/06/2011

EN 15283-2:2008

01/06/2010

01/06/2011

EN 15102:2007+A1:2011
CEN

CEN

Decorative wall coverings - Roll

and panel form

EN 15102:2007

EN 15129:2009
Anti-seismic devices
EN 15167-1:2006

CEN

Ground granulated blast furnace

slag for use in concrete, mortar
and grout - Part 1: Definitions,
specifications and conformity
criteria
EN 15250:2007

CEN

Slow heat release appliances fired

by solid fuel - Requirements and
test methods
EN 15258:2008

CEN

Precast concrete products Retaining wall elements

EN 15274:2007

CEN

General purpose adhesives for

structural assembly Requirements and test methods
EN 15275:2007

CEN

Structural adhesives Characterisation of anaerobic

adhesives for co-axial metallic
assembly in building and civil
engineering structures
EN 15275:2007/AC:2010
EN 15283-1:2008+A1:2009

CEN

CEN

Gypsum boards with fibrous

reinforcement - Definitions,
requirements and test methods Part 1: Gypsum boards with mat
reinforcement
EN 15283-2:2008+A1:2009

Gypsum boards with fibrous

reinforcement - Definitions,
requirements and test methods Part 2: Gypsum fibre boards
EN 15285:2008
CEN

Agglomerated stone - Modular

tiles for flooring and stairs
(internal and external)

01/01/2009

01/01/2010

EN 15285:2008/AC:2008

01/01/2009

01/01/2009

01/06/2010

01/06/2011

01/09/2011

01/09/2012

01/01/2010

01/01/2011

01/01/2010

01/01/2011

01/02/2009

01/02/2010

01/02/2009

01/02/2010

01/04/2011

01/04/2012

EN 15322:2009
CEN

Bitumen and bituminous binders Framework for specifying cutback and fluxed bituminous
binders
EN 15368:2008+A1:2010

CEN

Hydraulic binder for nonstructural applications Definition, specifications and

conformity criteria
EN 15381:2008

CEN

Geotextiles and geotextile-related

products - Characteristics
required for use in pavements
and asphalt overlays
EN 15382:2008

CEN

Geosynthetic barriers Characteristics required for use in

transportation infrastructure
EN 15435:2008

CEN

Precast concrete products Normal weight and lightweight

concrete shuttering blocks Product properties and
performance
EN 15498:2008

CEN

Precast concrete products Wood-chip concrete shuttering

blocks - Product properties and
performance
EN 15599-1:2010

CEN

Thermal insulation products for

building equipment and industrial
installations - In-situ thermal
insulation formed from expanded
perlite (EP) products - Part 1:
Specification for bonded and
loose-fill products before
installation

EN 15600-1:2010

CEN

Thermal insulation products for

building equipment and industrial
installations - In-situ thermal
insulation formed from exfoliated
vermiculite (EV) products - Part
1: Specification for bonded and
loose-fill products before
installation

01/04/2011

01/04/2012

01/09/2011

01/09/2012

01/07/2013

01/07/2014

01/07/2013

01/07/2014

01/07/2013

01/07/2014

01/07/2013

01/07/2014

01/08/2013

01/08/2014

01/11/2010

01/11/2011

EN 15650:2010
CEN

Ventilation for buildings - Fire

dampers
EN 15651-1:2012

CEN

Sealants for non-structural use in

joints in buildings and pedestrian
walkways - Part 1: Sealants for
facade elements
EN 15651-2:2012

CEN

Sealants for non-structural use in

joints in buildings and pedestrian
walkways - Part 2: Sealants for
glazing
EN 15651-3:2012

CEN

Sealants for non-structural use in

joints in buildings and pedestrian
walkways - Part 3: Sealants for
sanitary joints
EN 15651-4:2012

CEN

Sealants for non-structural use in

joints in buildings and pedestrian
walkways - Part 4: Sealants for
pedestrian walkways
EN 15732:2012

CEN

Light weight fill and thermal

insulation products for civil
engineering applications (CEA) Expanded clay lightweight
aggregate products (LWA)
EN 15743:2010

CEN

Supersulfated cement Composition, specifications and

conformity criteria
EN 15814:2011+A1:2012

CEN

Polymer modified bituminous

thick coatings for waterproofing Definitions and requirements

01/08/2013

01/08/2014

CEN

EN 15821:2010

01/07/2011

01/07/2012

Multi-firing sauna stoves fired by

natural wood logs - Requirements
and test methods
EN 15824:2009
CEN

Specifications for external renders

and internal plasters based on
organic binders

01/04/2010

01/04/2011

01/09/2013

01/09/2014

01/01/2014

01/01/2015

EN 13241-1:2003

01/01/2012

01/01/2013

EN 13561:2004

01/08/2009

01/08/2010

EN 13659:2004

01/08/2009

01/08/2010

EN 16069:2012
CEN

Thermal insulation products for

buildings - Factory made products
of polyethylene foam (PEF) Specification
EN 16153:2013 (new)

CEN

Light transmitting flat multiwall

polycarbonate (PC) sheets for
internal and external use in roofs,
walls and ceilings - Requirements
and test methods
EN 13241-1:2003+A1:2011

CEN

Industrial, commercial and garage

doors and gates - Product
standard - Part 1: Products
without fire resistance or smoke
control characteristics
EN 13561:2004+A1:2008

CEN

External blinds - Performance

requirements including safety
EN 13659:2004+A1:2008

CEN

Shutters - Performance
requirements including safety