INTECH PULTRUDED FRP CABLE LADDER & TRAY
The Material of The Future
FRP (Fiberglass Reinforced Plastic)
is produced from a combination
of fiberglass reinforcements and
thermosetting resins.
Since its introduction, this special
millennium product has gained
wide acceptance for its superior
benefits and is presently used all
over the world.
PULTRUSION is a process whereby glass fibre (Roving) is continuously pulled through a liquid resin bath until it
reaches a heated die at the exit of the line. Here, the resin solidifies into the different profiles according to the
various moulds. (Refer to diagram on page 2)
Load
This continuous process gives added resistance to the
tension, compression and flexibility of its products.
Deflection
It also provides higher strength resulting in a
reinforced structure system that is capable of
Reflect
taking high loads. (For details, please refer
to the safe working load graph).
Benefits of Pultrusion FRP Products
Corrosion Resistant
-
No rusting, peeling or flaking even under the most
High Impact Resistant & Elastic
-
aggressive conditions in any part of the world.
Returns to original position without any permanent
deflection or distortion within recommended
allowable loads.
Lightweight and Durable
-
Allows easy handling and cutting.
Reduces size of platform structure.
Superior UV Protection
-
INTECHs integral UV protection system gives long-term
shield against the damaging effects of UV rays.
Cost Effective
-
Extremely long life compared to metal and
Complies to international electrical safety specifications.
Completely maintenance-free.
Allows transmission of radio waves.
Non-magnetic.
High Strength and Stiffness
-
Non-Conductive & Non-Interfering
other plastic materials.
High glass content and continuous reinforcement,
Low Thermal Conductivity & Expansion Rate
pultruded FRP products give extremely high strength
Will not transfer heat unlike metal.
and stiffness compared to molded FRP and other
No problem of expansion under heat.
engineering plastic.
Fire Retardant
-
INTRALINK TECHNO SDN BHD
Complies to ASTM-E84 and BS 476 standards.
INTECH PULTRUDED FRP CABLE LADDER & TRAY
FRP Pultrusion Process
CONTINUOUS PULTRUSION
CONTINUOUS
FILAMENT MATS
SURFACE
VEILS
AUTOMATIC
CUTTER
PREFORMER
PULLERS
HEATED DIE
FIBREGLASS
ROVING
Roving & Mat
Unidirectional glass
roving fibres give
longitudinal
reinforcement of the
profile while mats give
transverse strength
PULTRUSION PROCESS
RESIN
IMPREGNATION
Resin
Bonds with the
reinforcement,
and provide
resistance to
chemicals.
Pultrusion is a continuous moulding process fabricating
products of uniform cross section such as I Beams,
Channels, Flat Bars, Rods, Hollow Sections, etc. utilising
glass fibre, resin, filler, peroxide and a release agent. The
glass reinforcement is drawn into a resin impregnation
zone where the glass substrate is thoroughly impregnated
with the resin mixture. The wet fibrous material will be
pulled through a preformer into a heated die. The shape of
the end product is determined by the configuration of the
die and the resin is then polymerised. This continuous
and uniform method ensures consistency throughout the
entire product length, therefore eliminating the possibility
of weak spots.
INTRALINK TECHNO SDN BHD
Heated Die
Where
polymerisation or
curing takes place
and product forms
into the shape of the
profile.
Pullers
Assures
continuous
drawing of the
profile.
Automatic
Cutter
Cuts product to
the pre-set
length.
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Standards and Certification
INTECHs dedication towards excellent quality is reflected in all its FRP products that have been tested to comply with
major international standards such as the ASTM, BS, NEMA and UL. The companys focus has always been to provide
products and services that not only meet customers requirements but also exceed their expectations, both locally and
around the world.
Certification that stand as testimony of this commitment over the years include those conducted by following independant
testing inspection organisation:
SIRIM
SGS
ABS
Lloyds
PSB
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Safe Working Load-Cable Ladder
FRP Cable Ladder Load Test
INTECH LSH Series, 152 Ht
FRP Cable Ladder Load Test
INTECH LMH Series, 152 Ht
SWL
lb/ft kg/m
SWL
lb/ft kg/m
400
400
250
x
350
200
250
CLASS C : 148.8 kg/m and above
: 100 lb/ft and above
300
200
250
300
250
150
150
x
200
100
CLASS C : 148.8 kg/m and above
: 100 lb/ft and above
350
150
CLASS B :
:
CLASS A :
:
100
50
200
100
111.6 kg/m and above
75 lb/ft and above
74.4 kg/m and above
50 lb/ft and above
150
100
50
50
x
CLASS B : 111.6 kg/m and above
: 75 lb/ft and above
CLASS A : 74.4 kg/m and above
: 50 lb/ft and above
50
Span, m
0
2.44
3.05
3.66
4.27
4.88
5.49
6.10
10
12
14
16
18
20
Span, m
Span, ft
2.44
3.05
3.66
4.27
4.88
5.49
6.10
10
12
14
16
18
20
FRP Cable Ladder Load Test
INTECH LH Series, 152 Ht
FRP Cable Ladder Load Test
INTECH LM Series, 102 Ht
SWL
lb/ft kg/m
SWL
lb/ft kg/m
400
250
350
200
Span, ft
400
x
250
CLASS C : 148.8 kg/m and above
: 100 lb/ft and above
300
CLASS C : 148.8 kg/m and above
: 100 lb/ft and above
350
200
250
300
250
150
150
200
200
x
100
150
100
50
CLASS B :
:
CLASS A :
:
100
111.6 kg/m and above
75 lb/ft and above
74.4 kg/m and above
50 lb/ft and above
150
CLASS B : 111.6 kg/m and above
: 75 lb/ft and above
100
50
50
CLASS A : 74.4 kg/m and above
: 50 lb/ft and above
50
Span, m
0
2.44
3.05
3.66
4.27
4.88
5.49
6.10
10
12
14
16
18
20
Span, m
Span, ft
2.44
3.05
3.66
4.27
4.88
5.49
6.10
10
12
14
16
18
20
Span, ft
INTECH FRP Cable Ladder Classification (NEMA FG1)
1
LSH Series
152 Ht,
LH Series
152 Ht,
Span, ft
8
12
16
20
8
12
16
20
Class
8C
12C
16C
20C
8C
12C
16C
20B
*Other range available upon request
INTRALINK TECHNO SDN BHD
Classification
*NEMA FG1 20C
3 LMH Series
152 Ht,
4
*NEMA FG1 20B
LM Series
102 Ht,
Span, ft
8
12
16
Class
8C
12C
16A
8
12
16
8C
12B
16A
Classification
*NEMA FG1 12C
*NEMA FG1 12B
* SWL determined from load test in accordance with
item 4.1 of NEMA FG1 with Safety Factor of 1.5.
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Safe Working Load-Cable Tray
INTECH C Type Cable Tray ,50Ht & 110Ht
200
180
160
SWL, kg/m
140
120
100
600W x 110Ht
300W x 110Ht
400W x 50Ht
300W x 50Ht
200W x 50Ht
150W x 50Ht
100W x 50Ht
50W x 50Ht
80
60
40
20
0
0.5
1.5
2.5
3.5
Span, meter
INTECH C Type Cable Tray, 50Ht & 110Ht
Thk, mm
Width, mm
Height.mm
Safe Working Load for Span 1500, kg/m
3
3
3
3
3
4
3
3
50
100
150
200
300
400
300
600
50
50
50
50
50
50
110
110
39.5
57.9
60.2
63.8
111.1
155.6
114.7
171.5
INTECH U Type Cable Tray ,50Ht & 55Ht
70
60
SWL, kg/m
50
40
30
110W x 55Ht
85W x 55Ht
150W x 50Ht
100W x 50Ht
75W x 50Ht
20
10
0
0.5
1.5
2.5
3.5
Span, meter
INTECH U Type Cable Tray, 50Ht & 55Ht
Thk, mm
Width, mm
Height,mm
Safe Working Load for Span 1500, kg/m
3
3
3
5
5
75
100
150
85
110
50
50
50
55
55
28.5
32.4
33.0
53.3
64.0
INTRALINK TECHNO SDN BHD
* SWL determined from load
test in accordance with
item 4.1 of NEMA FG1
with Safety Factor of 1.5.
* Other range available upon request
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LH Series
10 HOLES
3000
150
300
150
LH Series-Straight Run
t
H
SECTION A-A
REMARKS
LH
152
41
6.0
24
50
60
W=150, 300, 450, 600, 750, 900
15
15
TYPE
5.0
3000mm
C
C
W=150, 300
LH Series-Cover
FLAT COVER
15
150
9 x 300 (2700)
150
30
W-60
30
15
SECTION C-C
W (450 AND ABOVE)
15
2.0
3.0
70
15
5.0
3000mm
C
C
W=450, 600, 750, 900
FRP RIBBED COVER FOR CABLE LADDER
INTRALINK TECHNO SDN BHD
* Thickness of FRP side rail for LH Series is 6mm unless otherwise specified.
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
150 60
Cable Ladder - LH Series
150
150
W
A
LH Series-Horizontal Bend
R
150
30/45 HORIZONTAL BEND
(30/45 HB)
W
A
90 HORIZONTAL BEND
(90 HB)
90 HB
R = 300
R = 600
R = 900
45 HORIZONTAL BEND
30 HORIZONTAL BEND
REF NO
REF NO
REF NO
LH 90 HB 150
LH 90 HB 300
LH 90 HB 450
LH 90 HB 600
LH 90 HB 750
LH 90 HB 900
150
300
450
600
750
900
600
750
900
1050
1200
1350
849
1061
1273
1485
1697
1909
900
1050
1200
1350
1500
1650
1273
1485
1697
1909
2121
2333
1200
1350
1500
1650
1800
1950
1697
1909
2121
2333
2546
2758
LH 45 HB 150
LH 45 HB 300
LH 45 HB 450
LH 45 HB 600
LH 45 HB 750
LH 45 HB 900
150
300
450
600
750
900
405
555
705
855
1005
1155
721
827
933
1039
1145
1251
LH 30 HB 150
LH 30 HB 300
LH 30 HB 450
LH 30 HB 600
LH 30 HB 750
LH 30 HB 900
150
300
450
600
750
900
320
480
630
780
930
1080
747
822
897
972
1047
1122
150
150
60 150
150
45/30 INSIDE VERTICAL BEND
(45/30 IVE)
LH Series-Inside Vertical Bend
90 INSIDE VERTICAL BEND
(90 IVE)
90 IVE
R = 300
R = 600
R = 900
45 INSIDE VERTICAL BEND
30 INSIDE VERTICAL BEND
REF NO
REF NO
REF NO
LH 90 IVE 150
LH 90 IVE 300
LH 90 IVE 450
LH 90 IVE 600
LH 90 IVE 750
LH 90 IVE 900
150
300
450
600
750
900
482
482
482
482
482
482
682
682
682
682
682
682
782
782
782
782
782
782
1106
1106
1106
1106
1106
1106
1082
1082
1082
1082
1082
1082
1530
1530
1530
1530
1530
1530
LH 45 IVE 150
LH 45 IVE 300
LH 45 IVE 450
LH 45 IVE 600
LH 45 IVE 750
LH 45 IVE 900
150
300
450
600
750
900
299
299
299
299
299
299
722
722
722
722
722
722
LH 30 IVE 150
LH 30 IVE 300
LH 30 IVE 450
LH 30 IVE 600
LH 30 IVE 750
LH 30 IVE 900
150
300
450
600
750
900
200
200
200
200
200
200
748
748
748
748
748
748
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LH Series
L
A
L
150
A
150 60
150
30/45 OUTSIDE VERTICAL BEND
(30/45 OVE)
LH Series-Outside Vertical Bend
R
150
90 OUTSIDE VERTICAL BEND
(90 OVE)
90 OVE
R = 300
R = 600
R = 900
45 OUTSIDE VERTICAL BEND
30 OUTSIDE VERTICAL BEND
REF NO
REF NO
REF NO
LH 90 OVE 150
LH 90 OVE 300
LH 90 OVE 450
LH 90 OVE 600
LH 90 OVE 750
LH 90 OVE 900
150
300
450
600
750
900
602
602
602
602
602
602
851
851
851
851
851
851
902
902
902
902
902
902
1276
1276
1276
1276
1276
1276
1202
1202
1202
1202
1202
1202
1700
1700
1700
1700
1700
1700
LH 45 OVE 150
LH 45 OVE 300
LH 45 OVE 450
LH 45 OVE 600
LH 45 OVE 750
LH 45 OVE 900
150
300
450
600
750
900
407
407
407
407
407
407
722
722
722
722
722
722
LH 30 OVE 150
LH 30 OVE 300
LH 30 OVE 450
LH 30 OVE 600
LH 30 OVE 750
LH 30 OVE 900
150
300
450
600
750
900
332
332
332
332
332
332
748
748
748
748
748
748
W2
60
LH Series-Horizontal Tee
60
150
150
150
150
W1
HORIZONTAL EQUAL TEE
(HT)
90 HT
INTRALINK TECHNO SDN BHD
R = 300
R = 600
R = 900
REF NO
LHHT 150
LHHT 300
LHHT 450
LHHT 600
LHHT 750
LHHT 900
150
300
450
600
750
900
810
960
1110
1260
1410
1560
1470
1620
1770
1920
2070
2220
1110
1260
1410
1560
1710
1860
2070
2220
2370
2520
2670
2820
1410
1560
1710
1860
2010
2160
2670
2920
2970
3120
3270
3420
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
Cable Ladder - LH Series
W2
150 150 60
150 150 60
LH Series-Horizontal Cross
R
W1
HORIZONTAL EQUAL CROSS
(HC)
90 HC
R = 300
R = 600
REF NO
LHHC 150
LHHC 300
LHHC 450
LHHC 600
LHHC 750
LHHC 900
150
300
450
600
750
900
1470
1620
1770
1920
2070
2220
1470
1620
1770
1920
2070
2220
2070
2220
2370
2520
2670
2820
2070
2220
2370
2520
2670
2820
2670
2920
2970
3120
3270
3420
2670
2920
2970
3120
3270
3420
W1
150
150
150
150
150
LH Series-Left/Right
Hand Reducer
(W1-W2)
60
60
(W1-W2)
60
60
150
150
150
W1
W2
W2
RIGHT HAND REDUCER
(RHR)
LEFT HAND REDUCER
(LHR)
RHR AND LHR
INTRALINK TECHNO SDN BHD
R = 900
RHR AND LHR
REF NO
W1
W2
REF NO
W1
W2
LH RHR (LHR) 900-750
LH RHR (LHR) 900-600
LH RHR (LHR) 900-450
LH RHR (LHR) 900-300
LH RHR (LHR) 900-150
LH RHR (LHR) 750-600
LH RHR (LHR) 750-450
LH RHR (LHR) 750-300
900
900
900
900
900
750
750
750
750
600
450
300
150
600
450
300
870
1020
1170
1320
1470
870
1020
1170
LH RHR (LHR) 750-150
LH RHR (LHR) 600-450
LH RHR (LHR) 600-300
LH RHR (LHR) 600-150
LH RHR (LHR) 450-300
LH RHR (LHR) 450-150
LH RHR (LHR) 300-150
750
600
600
600
450
450
300
150
450
300
150
300
150
150
1320
870
1020
1170
870
1020
870
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
Cable Ladder - LH Series
W1
60
150
150
STRAIGHT REDUCER (SR)
150
60
(W1-W2)/2
150
LH Series-Straight Reducer
W2
STRAIGHT REDUCER
(SR)
REF NO
W1
W2
LH SR 900-750
LH SR 900-600
LH SR 900-450
LH SR 900-300
LH SR 900-150
LH SR 750-600
LH SR 750-450
LH SR 750-300
LH SR 750-150
LH SR 600-450
LH SR 600-300
LH SR 600-150
LH SR 450-300
LH SR 450-150
LH SR 300-150
900
900
900
900
900
750
750
750
750
600
600
600
450
450
300
750
600
450
300
150
600
450
300
150
450
300
150
300
150
150
795
870
945
1020
1095
795
870
945
1070
795
870
945
795
870
795
214
32
50
50
50
32
4 NOS. 10 HOLES
LADDER TYPE
LH
125
32.5
60
LH-ESP DIMENSIONS
FRP : 6mm
4 NOS. 10 x 18 SLOTS
LH-EXPANSION SPLICE PLATE (ESP)
LH Series-Splice Plate
4 NOS. 10 HOLES
50
50
32
1 NOS M10 B&N, FW, SW
B
C
B
50
32
4 NOS. 10 HOLES
4 NOS. 10 x 18 SLOTS
4 NOS. 10 x 18 SLOTS
HORIZONTAL ADJUSTABLE SPLICE PLATE
(HESP)
VERTICAL ADJUSTABLE SPLICE PLATE
(VESP)
LH-HESP DIMENSIONS
10
LH-VESP DIMENSIONS
LADDER TYPE
LADDER TYPE
LH
125
32.5
60
LH
125
32.5
60
75
16
15
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LH Series
LH Series-Cover Clamp-SS316 (CC-SS)
M8 THREADED HOLE
FOR SS316 HEXAGON BOLT
M8 x 10 & SPRING WASHER
LH Series-Hold Down Clamp (HDC)
16 UT
S3 &N
R S LT
FO 0 BO
S
4
E
OL 0 x
2 H M1
1 AD
HE
.
X
HE
CC-SS
HDC
LADDER TYPE
LADDER TYPE
LH
160
30
2.0
48
24
LH
27
40
40
12.2
25
LH Series-Blind End Plate (BEP)
LH Series-Vertical Fixing Clamp (VFC)
EW
CR
6
S
31 G
SS PIN
OR TAP
S F LF
E
L SE
HO .5
3 x 12
#6
X.
HE
16 UT
S3T&N
S
L
R
FO BO
ES 40
OL 0 x
2 H M1
1
D
A
HE
10 HOLES FOR M8 x 25
PAN HEAD BOLT, NUT, SW, FW
150
60
45
45
25
64
+1
39
VFC
11
INTRALINK TECHNO SDN BHD
LADDER TYPE
LH
27
40
40
12.2
25
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LM Series
10 HOLES
3000
150
300
150
LM Series-Straight Run
25
SECTION A-A
REMARKS
LM
102
41
4.8
24
50
40
W=150, 300, 450, 600, 750, 900
15
15
TYPE
5.0
3000mm
C
C
W=150, 300
LM Series-Cover
FLAT COVER
15
150
9 x 300 (2700)
150
30
W-60
30
15
SECTION C-C
W (450 AND ABOVE)
15
2.0
3.0
70
15
5.0
3000mm
C
C
W=450, 600, 750, 900
FRP RIBBED COVER FOR CABLE LADDER
12
INTRALINK TECHNO SDN BHD
* Thickness of FRP side rail for LM Series is 4.8mm unless otherwise specified.
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
150 60
Cable Ladder - LM Series
150
150
W
A
LM Series-Horizontal Bend
R
150
30/45 HORIZONTAL BEND
(30/45 HB)
W
A
90 HORIZONTAL BEND
(90 HB)
90 HB
R = 300
R = 600
R = 900
45 HORIZONTAL BEND
30 HORIZONTAL BEND
REF NO
REF NO
REF NO
LM 90 HB 150
LM 90 HB 300
LM 90 HB 450
LM 90 HB 600
LM 90 HB 750
LM 90 HB 900
150
300
450
600
750
900
600
750
900
1050
1200
1350
849
1061
1273
1485
1697
1909
900
1050
1200
1350
1500
1650
1273
1485
1697
1909
2121
2333
1200
1350
1500
1650
1800
1950
1697
1909
2121
2333
2546
2758
LM 45 HB 150
LM 45 HB 300
LM 45 HB 450
LM 45 HB 600
LM 45 HB 750
LM 45 HB 900
150
300
450
600
750
900
405
555
705
855
1005
1155
721
827
933
1039
1145
1251
LM 30 HB 150
LM 30 HB 300
LM 30 HB 450
LM 30 HB 600
LM 30 HB 750
LM 30 HB 900
150
300
450
600
750
900
320
480
630
780
930
1080
747
822
897
972
1047
1122
150
102
102
150
60 150
150
30/45 INSIDE VERTICAL BEND
(30/45 IVE)
LM Series-Inside Vertical Bend
90 INSIDE VERTICAL BEND
(90 IVE)
90 IVE
R = 300
R = 600
R = 900
45 INSIDE VERTICAL BEND
30 INSIDE VERTICAL BEND
REF NO
REF NO
REF NO
LM 90 IVE 150
LM 90 IVE 300
LM 90 IVE 450
LM 90 IVE 600
LM 90 IVE 750
LM 90 IVE 900
150
150
150
150
150
150
482
482
482
482
482
482
682
682
682
682
682
682
782
782
782
782
782
782
1106
1106
1106
1106
1106
1106
1082
1082
1082
1082
1082
1082
1530
1530
1530
1530
1530
1530
LM 45 IVE 150
LM 45 IVE 300
LM 45 IVE 450
LM 45 IVE 600
LM 45 IVE 750
LM 45 IVE 900
150
300
450
600
750
900
284
284
284
284
284
284
686
686
686
686
686
686
LM 30 IVE 150
LM 30 IVE 300
LM 30 IVE 450
LM 30 IVE 600
LM 30 IVE 750
LM 30 IVE 900
150
300
450
600
750
900
194
194
194
194
194
194
724
724
724
724
724
724
13
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LM Series
L
A
L
150
A
150 60
150
30/45 OUTSIDE VERTICAL BEND
(30/45 OVE)
LM Series-Outside Vertical Bend
R
150
90 OUTSIDE VERTICAL BEND
(90 OVE)
90 OVE
R = 300
R = 600
R = 900
45 OUTSIDE VERTICAL BEND
30 OUTSIDE VERTICAL BEND
REF NO
REF NO
REF NO
LM 90 OVE 150
LM 90 OVE 300
LM 90 OVE 450
LM 90 OVE 600
LM 90 OVE 750
LM 90 OVE 900
150
300
450
600
750
900
552
552
552
552
552
552
781
781
781
781
781
781
852
852
852
852
852
852
1205
1205
1205
1205
1205
1205
1152
1152
1152
1152
1152
1152
1629
1629
1629
1629
1629
1629
LM 45 OVE 150
LM 45 OVE 300
LM 45 OVE 450
LM 45 OVE 600
LM 45 OVE 750
LM 45 OVE 900
150
300
450
600
750
900
357
357
357
357
357
357
687
687
687
687
687
687
LM 30 OVE 150
LM 30 OVE 300
LM 30 OVE 450
LM 30 OVE 600
LM 30 OVE 750
LM 30 OVE 900
150
300
450
600
750
900
282
282
282
282
282
282
723
723
723
723
723
723
W2
60
LM Series-Horizontal Tee
60
150
150
150
150
W1
HORIZONTAL EQUAL TEE
(HT)
90 HT
14
INTRALINK TECHNO SDN BHD
R = 300
R = 600
R = 900
REF NO
LMHT 150
LMHT 300
LMHT 450
LMHT 600
LMHT 750
LMHT 900
150
300
450
600
750
900
810
960
1110
1260
1410
1560
1470
1620
1770
1920
2070
2220
1110
1260
1410
1560
1710
1860
2070
2220
2370
2520
2670
2820
1410
1560
1710
1860
2010
2160
2670
2920
2970
3120
3270
3420
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
Cable Ladder - LM Series
W2
150 150 60
150 150 60
LM Series-Horizontal Cross
R
W1
HORIZONTAL EQUAL CROSS
(HC)
90 HC
R = 300
R = 600
REF NO
LMHC 150
LMHC 300
LMHC 450
LMHC 600
LMHC 750
LMHC 900
150
300
450
600
750
900
1470
1620
1770
1920
2070
2220
1470
1620
1770
1920
2070
2220
2070
2220
2370
2520
2670
2820
2070
2220
2370
2520
2670
2820
2670
2920
2970
3120
3270
3420
2670
2920
2970
3120
3270
3420
W1
150
150
150
150
150
LM Series-Left/Right
Hand Reducer
(W1-W2)
60
60
(W1-W2)
60
60
150
150
150
W1
W2
W2
RIGHT HAND REDUCER
(RHR)
LEFT HAND REDUCER
(LHR)
RHR AND LHR
15
INTRALINK TECHNO SDN BHD
R = 900
RHR AND LHR
REF NO
W1
W2
REF NO
W1
W2
LM RHR (LHR) 900-750
LM RHR (LHR) 900-600
LM RHR (LHR) 900-450
LM RHR (LHR) 900-300
LM RHR (LHR) 900-150
LM RHR (LHR) 750-600
LM RHR (LHR) 750-450
LM RHR (LHR) 750-300
900
900
900
900
900
750
750
750
750
600
450
300
150
600
450
300
870
1020
1170
1320
1470
870
1020
1170
LM RHR (LHR) 750-150
LM RHR (LHR) 600-450
LM RHR (LHR) 600-300
LM RHR (LHR) 600-150
LM RHR (LHR) 450-300
LM RHR (LHR) 450-150
LM RHR (LHR) 300-150
750
600
600
600
450
450
300
150
450
300
150
300
150
150
1320
870
1020
1170
870
1020
870
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
Cable Ladder - LM Series
W1
60
150
150
STRAIGHT REDUCER (SR)
150
60
(W1-W2)/2
150
LM Series-Straight Reducer
W2
STRAIGHT REDUCER
(SR)
REF NO
W1
W2
LM SR 900-750
LM SR 900-600
LM SR 900-450
LM SR 900-300
LM SR 900-150
LM SR 750-600
LM SR 750-450
LM SR 750-300
LM SR 750-150
LM SR 600-450
LM SR 600-300
LM SR 600-150
LM SR 450-300
LM SR 450-150
LM SR 300-150
900
900
900
900
900
750
750
750
750
600
600
600
450
450
300
750
600
450
300
150
600
450
300
150
450
300
150
300
150
150
795
870
945
1020
1095
795
870
945
1070
795
870
945
795
870
795
214
32
50
50
50
32
4 NOS. 10 HOLES
LADDER TYPE
LM
76
18
40
LM-ESP DIMENSIONS
FRP : 6mm
4 NOS. 10 x 18 SLOTS
LM-EXPANSION SPLICE PLATE (ESP)
LM Series-Splice Plate
4 NOS. 10 HOLES
50
50
32
1 NOS M10 B&N, FW, SW
B
C
B
50
32
4 NOS. 10 HOLES
4 NOS. 10 x 18 SLOTS
4 NOS. 10 x 18 SLOTS
HORIZONTAL ADJUSTABLE SPLICE PLATE
(HESP)
VERTICAL ADJUSTABLE SPLICE PLATE
(VESP)
LM-HESP DIMENSIONS
16
LM-VESP DIMENSIONS
LADDER TYPE
LADDER TYPE
LM
76
18
40
LM
76
18
40
75
16
15
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Ladder - LM Series
LM Series-Cover Clamp-SS316 (CC-SS)
M8 THREADED HOLE
FOR SS316 HEXAGON BOLT
M8 x 10 & SPRING WASHER
LM Series-Hold Down Clamp (HDC)
T
6
31 NU
SS T &
OR BOL
F
ES 40
OL 0 x
2 H M1
1 AD
E
.H
EX
CC-SS
HDC
LADDER TYPE
LADDER TYPE
LM
111
30
2.0
48
24
LM
27
37
40
10.7
25
LM Series-Blind End Plate (BEP)
LM Series-Vertical Fixing Clamp (VFC)
W
RE
6
SC
31 G
SS PPIN
R
FO F TA
S
LE SEL
HO .5
3 x 12
#6
X.
HE
16 UT
S3T&N
S
OR OL
SF 0B
LE x 4
HO M10
2
1 AD
HE
10 HOLES FOR M8 x 25
PAN HEAD BOLT, NUT, SW, FW
100
40
30
30
64
+1
25
39
VFC
17
INTRALINK TECHNO SDN BHD
LADDER TYPE
LM
27
37
40
10.7
25
INTECH PULTRUDED FRP
Cable Tray
3000
7.5 x 50 SLOT
7.5 x 12 SLOT
12
15
50
20
15
50
25
50
50
50
50
250
290
50
A
Cable Tray Pultruded Type,
"C" Shape
TP 050 50 C-STRAIGHT RUN
3000
8
100
62.5
31.25
31.25
50
18.75
18.75
50
7.5 x 50 SLOT
25
50
50
50
50
50
290
250
SECTION A-A
TP 100 50 C-STRAIGHT RUN
8
3000
A
21.75
50
35.5
7.5 x 50 SLOT
21.75
35.5
150
SECTION A-A
106.5
35.5
100
25
50
50
50
50
50
290
250
A
50
TP 150 50 C-STRAIGHT RUN
150
SECTION A-A
3000
24.25
7.5 x 50 SLOT
3
50
200
SECTION A-A
24.25
50
50.50 50.50 50.50
200
25
50
50
50
50
50
290
250
TP 200 50 C-STRAIGHT RUN
* Thickness of Cable Tray = 3mm
18
INTRALINK TECHNO SDN BHD
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Tray
50
50
100
150
SECTION A-A
SECTION A-A
SECTION A-A
3000
22.5
7.5 x 12 SLOT
7.5 x 50 SLOT
22.5
75
30
12
25
50
50
50
50
50
290
250
TP 075 50 U-STRAIGHT RUN
3000
31.25
7.5 x 50 SLOT
31.25
100
18.75
62.5
18.75
25
50
50
50
50
50
290
250
TP 100 50 U-STRAIGHT RUN
3000
35.5
35.5
7.5 x 50 SLOT
21.75
150
106.5
35.5
21.75
25
50
50
50
50
50
290
250
TP 150 50 U-STRAIGHT RUN
19
INTRALINK TECHNO SDN BHD
50
75
Cable Tray Pultruded Type,
"U" Shape
50
CABLE LADDER & TRAY
INTECH PULTRUDED FRP
Cable Tray
55
55
85
110
SECTION A-A
SECTION A-A
Cable Tray Pultruded Type
(Heavy Duty), "U" Shape
3000
27.5
7.5 x 12 SLOT
30
12
7.5 x 50 SLOT
27.5
85
50
25
50
50
50
50
50
290
250
TP (HD) 075 50 U-STRAIGHT RUN
7.5 x 50 SLOT
100
110
31.25 31.25
23.75
62.5
23.75
3000
25
50
50
50
50
50
290
250
TP (HD) 100 50 U-STRAIGHT RUN
25
7 x 12 Slot
50
25
16
FRP CONNECTOR PLATE FOR CABLE TRAY (HEAVY DUTY)
TRAY W :
TP (HD) 75
TP (HD) 100
CP, W :
93
118
32
48
FRP CONNECTOR THICKNESS = 4 MM
100
TRAY CONNECTOR PLATE
20
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Tray
3
18
SECTION A-A
COVER TYPE
TP 050 50 C
TP 100 50 C
TP 150 50 C
TP 200 50 C
50
100
150
200
3000
COVER TYPE
TP 075 50 U
TP 100 50 U
TP 150 50 U
75
100
150
Cable Tray-C Series &
U Series-Cover
TPU/TPC 90 HB
100
TRAY TYPE
TP 200 50 C
TP 150 50 U/C
TP 100 50 U/C
TP 075 50 U
TP 050 50 C
200
150
100
75
50
600
550
500
475
450
300
300
300
300
300
Cable Tray-Horizontal Bend
50
25
100
TPU/TPC 90 IVB
TRAY TYPE
TP 200 50 C
TP 150 50 U/C
TP 100 50 U/C
TP 075 50 U
TP 050 50 C
200
150
100
75
50
450
450
450
450
450
300
300
300
300
300
Cable Tray-Inside Vertical Bend
100
25
50
TPU/TPC 90 OVB
Cable Tray-Outside Vertical Bend
21
INTRALINK TECHNO SDN BHD
TRAY TYPE
TP 200 50 C
TP 150 50 U/C
TP 100 50 U/C
TP 075 50 U
TP 050 50 C
200
150
100
75
50
450
450
450
450
450
300
300
300
300
300
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Tray
Cable Tray-Horizontal
Equal Tee
150
150
300
TPU/TPC 90 ET
TRAY TYPE
TP 200 50 C
TP 150 50 U/C
TP 100 50 U/C
TP 075 50 U
TP 050 50 C
200
150
100
75
50
650
600
550
525
500
1100
1050
1000
975
950
TPU/TPC 90 UET
Cable Tray-Horizontal
Unequal Tee
W2
150
150
300
W1
22
INTRALINK TECHNO SDN BHD
TRAY TYPE
W1
W2
TP 050 50/075 50 C/U
TP 050 50/100 50 C/U
TP 050 50/150 50 C/U
TP 050 50/200 50 C/U
TP 075 50/050 50 C/U
TP 075 50/100 50 C/U
TP 075 50/150 50 C/U
TP 075 50/200 50 C/U
TP 100 50/050 50 C/U
TP 100 50/075 50 C/U
TP 100 50/150 50 C/U
TP 100 50/200 50 C/U
TP 150 50/050 50 C/U
TP 150 50/075 50 C/U
TP 150 50/100 50 C/U
TP 150 50/200 50 C/U
TP 200 50/050 50 C/U
TP 200 50/075 50 C/U
TP 200 50/100 50 C/U
TP 200 50/150 50 C/U
50
50
50
50
75
75
75
75
100
100
100
100
150
150
150
150
200
200
200
200
75
100
150
200
50
100
150
200
50
75
150
200
50
75
100
200
50
75
100
150
525
550
600
650
500
550
600
650
500
525
600
650
500
525
550
650
500
525
550
600
950
950
950
950
975
975
975
975
1000
1000
1000
1000
1050
1050
1050
1050
1100
1100
1100
1100
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Tray
W1-W2
2
150
W1
150
Cable Tray-Straight Reducer
W2
TPU, TPC, SR
TRAY TYPE
W1
W2
TP 075 50/050 50 C/U
TP 100 50/075 50 C/U
TP 100 50/050 50 C/U
TP 150 50/100 50 C/U
TP 150 50/075 50 C/U
TP 150 50/050 50 C/U
TP 200 50/150 50 C/U
TP 200 50/100 50 C/U
TP 200 50/075 50 C/U
TP 200 50/050 50 C/U
75
100
100
150
150
150
200
200
200
200
50
75
50
100
75
50
150
100
75
50
TPU, TPC, RHR/LHR
Cable Tray-Right/Left
Hand Reducer
W2
75
100
100
150
150
150
200
200
200
200
50
75
50
100
75
50
150
100
75
50
150
W1-W2
2
150
W1-W2
2
150
W2
LEFT HAND REDUCER (LHR)
23
W1
W1
150
W1
TRAY TYPE
TP 075 50/050 50 C/U
TP 100 50/075 50 C/U
TP 100 50/050 50 C/U
TP 150 50/100 50 C/U
TP 150 50/075 50 C/U
TP 150 50/050 50 C/U
TP 200 50/150 50 C/U
TP 200 50/100 50 C/U
TP 200 50/075 50 C/U
TP 200 50/050 50 C/U
INTRALINK TECHNO SDN BHD
W2
RIGHT HAND REDUCER (RHR)
INTECH PULTRUDED FRP
CABLE LADDER & TRAY
Cable Tray
Cable Tray-Horizontal
Equal Cross
150
150
300
TPU, TPC, 90 EC
50
200
150
100
75
50
650
600
550
525
500
1100
1050
1000
975
950
1 NOS. M10 B&N, FW, SW
50
20
40
23
TRAY TYPE
TP 200 50 C
TP 150 50 U/C
TP 100 50 U/C
TP 075 50 U
TP 050 50 C
2 NOS. 7 x 12mm SLOT
2 NOS. 7 HOLES
TPC &TPU VERTICAL ADJUSTABLE SPLICE PLATE-TRAY
(TPC, TPU VESP)
Cable Tray-Splice Plate
196
4
50
50
23
50
50
50
20
20
4 NOS. 7 x 12 SLOT
TRAY EXPANSION SPLICE PLATE
(TPC, TPU ESP)
24
40
40
20
23
INTRALINK TECHNO SDN BHD
2 NOS. 7 HOLES
2 NOS. 7 x 12mm SLOT
TPC & TPU HORIZONTAL ADJUSTABLE SPLICE PLATE-TRAY
(TPC, TPU HESP)
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Recommended Support As Per NEMA Standard
SPLICE PLATE LOCATION
As per NEMA FG1, splice plate is recommended
to be located at 1/4 of the span from the support,
where the bending moment is zero.
L/4
L
SUPPORT LOCATION
2'0" max
(600mm)
(600mm)
0"
m
00
(6
2'
ax
2'0" max
Offset Reducer
1/2
2'0" max
(600mm)
= 30, 45, 60, 90
Horizontal Elbows
2'0" max
2'0" max
(600mm)
(600mm)
1/2 L
2'0" max
(600mm)
TYP
2/3 R
2'0" max
(600mm)
(600mm)
2'0" max
= 30, 45, 60, 90
Vertical Elbows
Horizontal Tee
2/3 R
TYP
(600mm)
2'0" max
R
(600mm)
Horizontal Cross
Vertical Tee
25
INTRALINK TECHNO SDN BHD
(600mm)
(600mm)
2'0" max
(600mm)
2'0" max
2'0" max
2'0" max
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Chemical Resistance Data
26
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Typical Properties of Pultrusion FRP Products
The information given is a guide to the typical properties of Pultruded Glass Reinforced Plastic sections. The
pultruded profiles are made from a combination of continuous Logitudinal Rovings, Continuous Filament Mats
and Resin, thus properties will vary depending on reinforcement and resin choice.
COMPARISONS
N/mm2
Tensile Strength
Relative Weight
500
4
10-6/0C
25
20
400
3
15
200
10
100
300
Coefficient of Expansion
0
Pultrusion
Steel
Aluminium
Pultrusion
Steel
Aluminium
Pultrusion
PROPERTIES
Mechanical:
Tensile Strength, Longitudinal:
Flexural Stress, Longitudinal:
Elastic Modulus, Flexural, Longitudinal:
Compressive Strength:
Impact Strength:
Elongation at Rupture
Hardness (Barcol 934-1):
Specific Gravity:
250 - 350
250 - 350
15,000 - 30,000
150 - 300
1-2
2
40 - 60
1.7 - 1.9
N/mm2
N/mm2
N/mm2
N/mm2
kJ/M
%
Electrical:
Dielectric Strength:
Volume Resistivity:
12
1010 - 1012
kV/mm
/cm2
Thermal:
Coefficient of Thermal Expansion:
Thermal Conductivity:
Operating Temperature Range (Resin dependent):
8 - 10
0.2 - 0.3
-70 to +120
10-6/0K
W/0K.M
0
C
Fire:
B.S.476
ASTM E84
IEC 60695
- Class 1
- Class A
- 960C Max
Smoke:
ASTM E662
ASTM E84
- Ds at 1.5 min = 0.68
- Class A
Antistatic (optional)
BS EN 50014 - 2.27 M
27
INTRALINK TECHNO SDN BHD
Steel
Aluminium
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Typical Applications
TYPICAL APPLICATIONS
INTECH products can be used in either new application
or for replacing existing application which is exposed to
corrosive environment. The application can be found in
all type of industrial such as:-
FRP Cable Ladder & Tray For Chemical Complex
FRP Cable Ladder & Tray For Offshore Platform
FRP Cable Ladder For Gas Processing Plant
FRP Cable Ladder & Tray For Offshore Platform
28
INTRALINK TECHNO SDN BHD
Offshore and Onshore
Food
Power Plants
Electrical
Pollution Control
Water / Waste Treatment
Recreation
Public Facilities
Government Properties
Oil & Gas
Chemical
Marine
District Cooling System
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Applications of other INTECH FRP Pultruded Products
FRP Grating For Recreation Park (Malaysia)
FRP Profiles For Cooling Tower Structure (Singapore)
FRP Grating For Perimeter Drain (Malaysia)
FRP Grating & Handrails For FPSO (Brazil)
FRP Prefab. Platform For Power Plant (Taiwan)
FRP Handrail For Offshore Platform (Brazil)
FRP Grating For Chemical Plant (Malaysia)
Installation Of FRP Grating On Offshore Platform (Brunei)
29
INTRALINK TECHNO SDN BHD
INTECH PULTRUDED FRP CABLE LADDER & TRAY
Full Range of INTECH FRP Products
Assisting you to make a better choice from the best for your successful project with INTECH FRP composite
industrial products.
INTECH GRATING & STAIRTREAD
INTECH CABLE LADDER & CABLE TRAY
INTECH HANDRAIL & CAGED LADDER SYSTEM
INTECH STRUCTURAL SUPPORT SYSTEM
OTHER ARCHITECTURAL HAND-LAY UP PRODUCTS
30
INTRALINK TECHNO SDN BHD
