Serial Media Converters
TCF-142 Series
RS-232/422/485 to fiber converters
Ring and Point- to-Point transmission
Extends RS-232/422/485 transmission up to:
40 km with single-modeTCF-142-S
5 km with multi-modeTCF-142-M
Decreases signal interference
Protects against electrical interference and chemical corrosion
Supports baudrates up to 921.6 kbps
Wide temperature models available (-40 to 75C)
Introduction
The TCF-142 media converters are equipped with a multiple interface
circuit that can handle RS-232 or RS-422/485 serial interfaces and
multi-mode or single-mode fiber. TCF-142 converters are used to
extend serial transmission up to 5 km (TCF-142-M with multi-mode
fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142
converters can be configured to convert either RS-232 signals, or RS422/485 signals, but not both at the same time.
Automatic Baudrate Detection
The TCF-142 converters can automatically detect the serial baudrate.
This is an extremely convenient feature. Even if a devices baudrate
is changed, the signal will still be transmitted through the media
converter without any data loss.
Ring Operation
RS-422/485
V-
V+
T+
R-/D-
R+/D+
T-
GND
Rx
RS-232
Tx
12-48V
RS-232
RS-232/422/485
Serial to Fiber Converter
TCF-142-S
5210
Fiber Rx
TCF-142
Fiber Tx
PWR
Rx
Tx
Rx
Rx
PWR
Fiber Tx
Fiber Rx
Fiber Rx
5210
TCF-142-S
RS-232/422/485
Serial to Fiber Converter
R+/D+
V-
V+
RS-485
Tx
Rx
RS-422/485
T-
TCF-142
12-48V
GND
Rx
Tx
R-/D-
RS-232
T+
5210
TCF-142-S
RS-232/422/485
Serial to Fiber Converter
RS-422/485
R+/D+
TCF-142
T-
V-
V+
12-48V
GND
Rx
Tx
R-/D-
R+/D+
T-
T+
RS-422
RS-232
T+
5210
TCF-142-S
RS-232/422/485
Serial to Fiber Converter
RS-422/485
Tx
sw
Tx
Fiber Tx
RS-232
TCF-142
12-48V
V-
Tx
sw
PWR
V+
Rx
Tx
Fiber Rx
GND
Rx
Fiber Tx
Rx
Tx
sw
PWR
Tx
Rx
Rx
R-/D-
Tx
sw
The TCF-142 converters can be used to connect serial devices to a
fiber ring. To form the ring, connect the Tx port of one TCF-142 to the
Rx port of a neighboring converter. Once the ring is set up, simply use
the DIP switches to configure the TCF-142 converters for ring mode.
When one node transmits a signal, the signal travels around the ring
until it returns back to the transmitting unit, which then blocks the
signal. With the TCF-142, you can set up fiber rings that have a total
circumference of up to 100 km.
RS-485
Automatic Data Direction Control (ADDC)
ADDC is a patented hardware data flow solution developed by Moxa
to handle RS-485 data direction control. ADDC senses and controls
RS-485 data direction automatically, making it unnecessary to use the
hand shaking signal.
w w w. m o x a . c o m
Serial Media Converters
Specifications
Optical Fiber Side
Environmental Limits
Fiber Connector: SC or ST
Cable Requirements:
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 m
Multi-mode: 50/125, 62.5/125, or 100/140 m
Transmission Distance:
Single-mode: 40 km
Multi-mode: 5 km
Wavelength:
Single-mode: 1310 nm
Multi-mode: 850 nm
Tx Output:
Single-mode: > -5 dBm
Multi-mode: > -5 dBm
Rx Sensitivity:
Single-mode: -25 dBm
Multi-mode: -20 dBm
Ring Transmission: Half-duplex
Point-to-Point Transmission: Half-duplex or full-duplex
Operating Temperature:
Standard Models: 0 to 60C (32 to 140F)
Wide Temp. Models: -40 to 75C (-40 to 167F)
Storage Temperature: -40 to 75C (-40 to 167F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 140 mA @ 12 V
Power Line Protection:
2 kV Burst (EFT), EN61000-4-4
2 kV Surge, EN61000-4-5
Voltage Reversal Protection: Protects against V+/V- reversal
Over Current Protection: 1.1 A (protects against two signals shorted
together)
Standards and Certifications
Safety: UL 60950-1
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class B, EN 55022 Class B
EMS:
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (SFMF) Level 1
Green Product: RoHS, CRoHS, WEEE
RS-232/422/485 Side
Connector: Terminal Block
RS-232 Signals: Tx, Rx, GND
RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals: Data+, Data-, GND
Baudrate: 50 bps to 921.6 kbps
ESD Protection: 15 kV for all signals
Physical Characteristics
MTBF (mean time between failures)
Housing: Metal
Dimensions:
Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)
Weight: 320 g
Time: 780,480 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
DIP Switch Settings
Serial Connection
SW1
SW2
Built-in 120-ohm Terminator
SW3
Fiber Mode
RS-232
ON
OFF
Enable
ON
Ring mode
SW4
ON
RS-422
ON
ON
Disable
OFF
Point-to-Point mode
OFF
RS-485-4w
OFF
OFF
RS-485-2w
OFF
ON
Dimensions
Unit: mm (inch)
TCF-142-M/S-ST
22.0 (0.87)
6 (0.24)
67 (2.64)
78 (3.07)
22.0 (0.87)
7 (0.28)
21.3 (0.8)
42.3 (1.67)
25 (0.98)
12.5 (0.49)
100.4 (3.95)
4 (0.16)
67 (2.64)
90.2 (3.55)
w w w. m o x a . c o m
Serial Media Converters
Dimensions
Unit: mm (inch)
TCF-142-M/S-SC
22.0 (0.87)
6 (0.24)
25 (0.98)
12.5 (0.49)
100.4 (3.95)
4 (0.16)
7 (0.28)
22.0 (0.87)
21.3 (0.8)
42.3 (1.67)
67 (2.64)
67 (2.64)
78 (3.07)
90.2 (3.55)
Ordering Information
Available Models
TCF-142-M-SC: RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC
connector, 0 to 60C operating temperature
TCF-142-M-ST: RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST
connector, 0 to 60C operating temperature
TCF-142-S-SC: RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC
connector, 0 to 60C operating temperature
TCF-142-S-ST: RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST
connector, 0 to 60C operating temperature
TCF-142-M-SC-T: RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and
SC connector, -40 to 75C operating temperature
TCF-142-M-ST-T: RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and
ST connector, -40 to 75C operating temperature
TCF-142-S-SC-T: RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and
SC connector, -40 to 75C operating temperature
TCF-142-S-ST-T: RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and
ST connector, -40 to 75C operating temperature
Package Checklist
1 TCF-142 media converter
Power jack to 3-pin terminal
block adaptor
Stick-on pads
Quick installation guide (printed)
Warranty card
Moxa Inc. All rights reserved. Updated Apr. 9, 2015. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
