National Fire Fighting Manufacturing FZCo, one of the leading manufacturer of firefighting equipment in the world, situated in Jebel

Ali - Dubai, U.A.E., boasts state-ofthe-art manufacturing plant in order to achieve the highest level of quality in all the
products. NAFFCOs range of Portable Fire Extinguishers displays the BSI Kite Mark
confirming to BS EN3 standards and European equipment directives. The Fire
Extinguishers are subjected to stringent test conditions conforming to the
requirements of EN3.

NAFFCO is one among the first Asian manufacturers of Fire Extinguishers to

achieve the new CE marking under the Pressure Equipment Directive (PED).

NAFFCO High Pressure Carbon Dioxide extinguisher cylinders are manufactured

according to EN 1964-1:1999 and tests have been conducted by TUV
Suddeutschland, Germany.

NAFFCO wet chemical extinguishers for kitchen fires are approved as per BS 7937 : 2000
and bears the Kite Mark.

NAFFCO range of extinguishers have been approved by BSI for CE marking under
category III and modules B + E.

NAFFCO range of Extinguishers have been approved by BSI under Marine

equipment directive 96/98/EC as amended 2002/75.

NAFFCO range of extinguishers bears the British Approval of Fire Equipment

(BAFE).

NAFFCO range of Fire Fighting Equipment have been approved by BSI & bears the
Kite Mark.

NAFFCO quality management system is certified for ISO 9001 : 2000 by M/S BVQI Dubai,
M/S LPCB U.K & M/S BSI U.K.

NAFFCO ranges of fire extinguishers possess minimum residual charge after

operation and achieve higher Fire Ratings.

NAFFCO products are exported all over Europe, Middle east and African countries.

NAFFCO is represented through distributor network all over the world.

Carbon Dioxide Fire Extinguishers

Product description
NAFFCO
CO 2
gas
extinguishers are characterised
by their high performance for
fires involving an electrical risk
like
computers,
office
equipment and generators etc.
Co2 is non-conductive, clean
and safe, ensuring minimal
damage
to
electrical
equipment and furnishings.
Suitable for Class B fire risks

Features:

Model

NC2

NCS2

NCZ2

NC5

Extinguisher Capacity

2Kg

2Kg

2Kg

5Kg

Fire Rating

34B

34B

55B

55B

Working Pressure

55-60 Bar @ 25 C

Max. Operating Pressure

169 Bar @ 60C

Test Pressure

250Bar

Total Weight

8.3Kg

8.3Kg

8.5Kg

17Kg

Range of Discharge

4-5m

4-5m

4-5m

5-6m

Duration of Discharge

8-9Sec

9-10Sec

9-10Sec

9-10Sec

Height with Valve

63.5cm

63.5cm

63.5cm

74cm

N/A

N/A

N/A

75cm

Hose Length with Horn

Operating Temperature

-20C to +60C

Carbon Dioxide in gaseous

agent, colorless, odorless/
non-Toxic and provide rapid
knock down of industrial
fire. It is capable of fighting
Class B fire effectively.
Kite Mark Certified to BS EN3
CE mark Certified by BSI
under pressure equipment
directive
Certified by BSI under
Marine equipment directive
Seamless Steel body
(Lightweight)
High quality polyster paint
Controlled Discharge
Brass head valve with
simple squeeze operations
provided with pressure
relieve disc.
Rechargeable & easy to
service.
Non conductive agent for
electrical use without risk to
operator
CO2 gas disappears quickly
leaving no residue
Swivel horn with no freeze
burn, with greater
directional control of CO2
discharge through horn
rotation feature.
2Kg is available with the 55B
Fire rating as efficient as
5Kg unit.

Ideal
Use:
Chemical
Manufacturing Plant, Oil Rigs,
Rail
Yards,
Wa r e h o u s e s ,
Construction sites, parking
garages, Airport, Boat & Docks
and Large
laboratories.

1. Valve / Extn. Lever

2. Safety Pin with chain
3. Valve Handle
4. Discharge Horn

Model
5. Syphon Tube

Wall Bracket

NC2

34B

NCS2

34B

NCZ2

55B

NC5

55B

Carbon Dioxide High Pressure Cylinders

Product description
NAFFCO
CO2
Cylinders
manufactured are suitable to
use as extinguishers for fire
fighting purpose.
The
CO2
cylinder
are
manufactured by carbon steel
seamless pipes conforming to
DIN 2448/1629 standards of
grade ST 52.0
The CO2 cylinders are made
by Automatic CNC forming
machine to required sizes.
The cylinders are designed and
manufactured to comply BS
1964-1: 1999 standards.

Features:

Dimentions of Cylinder in mm
Capacity

2 Kg

3 Kg

5 Kg

6 Kg

10 Kg

101.60

139.70

139.70

139.70

139.70

D1

36.00

40.00

40.00

40.00

40.00

D2

TAP (W 28.8 x 14 TPI)*

+10.0

435

+10.0
- 0.0

+10.0

715

9.5 min

h1

32.00

34.00

34.00

34.00

34.00

a1

8 min

10.0 min

10.0 min

10.0 min

10.0 min

a2

8 min

10.0 min

10.0 min

10.0 min

10.0 min

4.00

5.00

5.00

5.00

5.00

R1

50.8

79.85

79.85

79.85

79.85

R2

74

69.85

69.85

69.85

69.85

R3

7 min

8.5 min

8.5 min

8.5 min

8.5 min

R4

13.5

17 min

17 min

17 min

17 min

15 min

15 min

Note: Reference Standard 97/23/EEC

Mechanical Properties Material Data

Yield Strength

Re min.

450 N/mm2

Tensile Sterngth

Rm min.

600 N/mm2

Rm max.

700 N/mm2

Test Pressure

A min.

14%

Ph

250 Bar

1130

+10.0
- 0.0

520 - 0.0

15 min

625 - 0.0

+10.0
- 0.0

* Thread Size Complying to BS 5423 : 1987

Elongation

15 min

Complaince to
CE 0036 is Certified by M/s
TUV, Suddeutschland,
Germany.
The inlet thread size is
made in accordance to
meet BS 5423 : 1987
standards using
W 28.8X14 TPI tap.
Each cylinders are
subjected to heat treatment
to meet the design criteria
for mechanical properties.
Each cylinders are shot
blasted to SA 2-1/2 grade
and painted RED

Option:
Convex shaped CO2 Cylinders
with bottom ring available upon
request

Dry Powder Fire Extinguishers

Product description
NAFFCO stored pressure type
Dry Powder extinguishers are
characterised by their high
performance, simple method of
operation and rapid fire knock
down capability. They are
suitable for tackling fires
involving
freely
burning
materials, petrol, oil, gas &
electrical equipment. They are
ideal for vehicle & marine risks.
NAFFCO
ABC
powder
extinguishers contain high
performance powder and are
one of the most powerful
powder extinguishers in the
world.

Features:

Model

NP1

NP2

NP4

NP6

NP9

NP12

Extinguisher Capacity

1Kg

2Kg

4Kg

6Kg

9Kg

12Kg

8A 34B

13A 70B

21A 113B

34A 183B

43A 233B

55A 233B

14Bar

14Bar

15Bar

15Bar

15Bar

15Bar

Fire Rating
Working Pressure

16.5 Bar @ 60C

Max. Operating Pressure

Test Pressure

30Bar

Total Weight

1.8Kg

3.7Kg

7.5Kg

10Kg

14Kg

17.8Kg

Range of Discharge

4-5m

5-7m

6-8m

6-8m

6-8m

6-8m

7-9Sec

10-12Sec

13-15Sec

18-20Sec

22-24Sec

28-30 Sec

Duration of Discharge
Operating Temperature

Monoammonium Phosphate
based Dry Chemical agent.
Capable of fighting class A,
B, C & E Fires.
Kite Mark Certified to BS EN3
CE mark Certified by BSI
under pressure equipment
directive
Certified by BSI under
Marine equipment directive
High Quality Polyster Paint
Controlled Discharge
Brass Nickel Plated Head
Valve with simple squeeze
operation.
Unique gauge testing
system
Unique colour coded handle
and base (Optional)
Rechargeable and easy to
service
Choice of capacity from 1 to
12 Kg.

Ideal Use : Houses, Office,

Buildings, warehouses, Farms,
Wood working area etc.

-20C to +60C

Note: Not recommended for

use on expensive and delicate
equipments like computer etc.

1. Valve / Extn. Lever

2. Safety Pin with chain
3. Valve Handle
4. Pressure Gauge

Pressure Gauge
W/Testing Hole

5. Discharge Hose
6. Syphon Tube

Model

7. Hose Holder
8. Discharge Nozzle
9. PVC Base

1Kg, 2Kg Bracket

Wall Bracket

NP1
NP2
NP4
NP6
NP9
NP12

8A
13A
21A
34A
43A
55A

34B
70B
113B
183B
233B
233B

Foam Fire Extinguishers

Product description
NAFFCO stored pressure type
Foam extinguishers are multipurpose, ideal for fires
involving volatile liquids and
freely burning materials such
as paper, cloth, wood and
furniture.
Suitable for Class A and Class
B fire risk
Note: Foam extinguishers are
not suitable for fire involving
electrical risk.

Features:

Model

NF6

NF9

6Litres

9Litres

21A 144B

21A 183B

14Bar

14Bar

Extinguisher Capacity
Fire Rating
Working Pressure
Max. Operating Pressure

15.5 Bar @ 60C

Test Pressure

30Bar

30Bar

Total Weight

11Kg

15.5Kg

Range of Discharge

6-8m

8-9m

21-23Sec

27-30Sec

Duration of Discharge

Operating Temperature

+ 5C to + 60C

1. Valve / Extn. Lever

2. Safety Pin with chain
3. Valve Handle
4. Pressure Gauge
5. PVC Internal Coating
6. Discharge Hose
7. Syphon Tube
8. Hose Holder
9. Filter
10. Discharge Nozzle
11. PVC Base

AFFF (6%) Synthetic

Aqueous Film Forming
Foam Agent capable of
fighting class A, B Fire
Kite Mark Certified to BS EN 3
CE mark Certified by BSI
under pressure equipment
directive
Certified by BSI under
Marine equipment directive
High Quality External
Polyster Paint
Thermoplastic Internal
Coating to prevent corrosion
Spray Nozzle to provide
high Fire Rating
Controlled Discharge
Brass Nickel Chrome Plated
head valve with simple
squeeze operation.
Unique gauge testing
system
Unique colour code handle
& Base (Optional)
Rechargeable & Easy to
Service.

Ideal Use: Petrol

Restaurants, etc.

Stations,

Caution:

Dont use on Electrical

Fire.

Pressure Gauge
W/Testing Hole

Wall Bracket

Model
NF6

21A

144B

NF9

21A

183B

Water Fire Extinguishers

Product description
NAFFCO stored pressure type
Water
extinguishers
are
characterised by their high
performance,simple method of
operation ideal for tackling
freely burning materials such
as paper, cloth, wood and
furniture. These are good
general
purpose
fire
extinguishers and widely used
as they are useful and costeffective.
Suitable for Class A fire risks
Note: Water extinguishers are not
suitable for fire involving electrical
risk.

Features:

Model
Extinguisher Capacity
Fire rating
Working Pressure

NW6

NW9

NWN6

6Litres

9Litres

6Litres

13A

21A

13A

14Bar

14Bar

14Bar

Max. Operating Pressure

15.5 Bar @ 60C

Test Pressure
Total Weight

30Bar
11Kg

15.5Kg

11Kg

6m

6-7m

7-8m

37-40Sec

47-50Sec

27-30sec

Range of Discharge
Duration of Discharge
Operating Temperature

+5C to +60C

1. Valve / Extn. Lever

2. Safety Pin with chain
3. Valve Handle
4. Pressure Gauge
5. PVC Internal Coating
6. Discharge Hose
7. Syphon Tube
8. Hose Holder
9. Filter
10. Discharge Nozzle
11. PVC Base

Water, a liquid agent only

recommended for fighting
class A Fire.
Kite Mark certified to BS
EN3
CE mark Certified by BSI
under pressure equipment
directive
Certified by BSI under
Marine equipment directive
High quality external
polyster paint
Thermoplastic internal
coating to prevent corrosion
Spray Nozzle to provide
high fire rating
Controlled discharge
Brass Nickel chrome plated
head valve with simple
squeeze operation
Unique gauge testing
system
Unique colour code handle
and base (Optional)
Rechargeable & easy to
service.

Ideal Use: Schools, Theaters,

Apartments and Office, Dry
goods store.
Caution:

Dont use on Electrical

Fire.

Pressure Gauge
W/Testing Hole

Wall Bracket

Model
NW6

13A

NW9

21A

NWN6

13A

FE-36 Fire Extinguishers

Product description
NAFFCO
clean
agent
extinguishers have effective
extinguishing
action,
environmentally acceptable
and excellent alternative for
Halon 1211. FE-36 is a non
corrosive, electrically non
conductive and free of residue.
It is ideally suited for protecting
high value equipment.

Features:

Model

NFE36-1

NFE36-2

NFE36-4

NFE36-6

Extinguisher Capacity

1Kg

2Kg

4Kg

6Kg

Fire Rating

21B

34B

5A 55B

8A 70B

14Bar

14Bar

14Bar

14Bar

Working Pressure
Max. Operating Pressure

15.5 Bar @ 60C

Test Pressure

30Bar

30Bar

30Bar

30Bar

Total Weight

1.92Kg

3.5Kg

7.1Kg

10Kg

Range of Discharge

3-4m

3-4m

4-5m

5-6m

Duration of Discharge

7Sec

8Sec

10Sec

15Sec

Operating Temperature

-20C to + 60C

Dupont FE 36
Hexafluoropropan Gas
Based Extinguishing Agent
capable of fighting class A,
B, & C Fire
CE Approved Fire
Extinguisher Assemblies.
High Performance
Extinguishing agent
High Quality polyster paint
Clean agent. Electrically
Non conductive, low in
toxicity
Controlled discharge
Brass Nickel plated head
valve with simple squeeze
operation
Unique gauge testing
system
Unique colour coded handle
and nozzle (Optional)
Environmental friendly, zero
ozone depletion potential
Rechargeable & easy to
service

Ideal
Use:
Computers,
Telephone, Switchgears &
Sensitive data storage.

1. Valve / Extn. Lever

2. Safety Pin with chain
3. Valve Handle
4. Pressure Gauge

Pressure Gauge
W/Testing Hole

5. Discharge Hose
6. Syphon Tube
7. Hose Holder

Model

8. Discharge Nozzle
NFE36-1

9. PVC Base

21B

NFE36-2
1Kg, 2Kg Bracket

Wall Bracket

34B

NFE36-4

5A

55B

NFE36-6

8A

70B

Wet Chemical Fire Extinguishers

Product description
NAFFCO stored pressure type
Water
extinguishers
are
characterised by their high
performance,simple method of
operation ideal for tackling
freely burning materials such
as paper, cloth, wood and
furniture. These are good
general
purpose
fire
extinguishers and widely used
as they are useful and costeffective.
Suitable for Class A fire risks
Note: Water extinguishers are not
suitable for fire involving electrical
risk.

Features:

Model

NKE6

Extinguisher Capacity

6Litres

Fire rating

13A 75F

Working Pressure

10Bar

Max. Operating Pressure

11.5 Bar @ 60C

Test Pressure

30Bar

Total Weight

11Kg

Range of Discharge

2-3m

Duration of Discharge

50-55Sec

Operating Temperature

+0C to +60C

1. Valve / Extn. Lever

2. Discharge Hose
3. Safety Pin with chain
4. Valve Handle
5. Pressure Gauge
6. Hose Holder
7. Syphon Tube
8. PVC Internal Coating
9. Filter
10. Discharge Nozzle
11. PVC Base

Water, a liquid agent only

recommended for fighting
class A Fire.
Kite Mark certified to BS
EN3
CE mark Certified by BSI
under pressure equipment
directive
Certified by BSI under
Marine equipment directive
High quality polyster paint
Thermoplastic internal
coating to prevent corrosion
Spray Nozzle to provide
high fire rating
Controlled discharge
Brass Nickel chrome plated
head valve with simple
squeeze operation
Unique gauge testing
system
Unique colour code handle
and base (Optional)
Rechargeable & easy to
service.
Passed 35KV Electrical
Conductivity Test

Ideal Use: Schools, Theaters,

Apartments and Office, Dry
goods store.
Caution:

Dont use on Electrical

Fire.

Pressure Gauge
W/Testing Hole

Wall Bracket

Model
NKE6

13A

75F

Fire Hose Reel with Semi-Rigid Hose

Product description
NAFFCO Fire hose reels
provide a very effective fire
fighting
facility
with
a
continuous supply of water
available immediately.
The
construction
and
performance of fire hose reel
with semi-rigid hose ensures
suitable installation in buildings
and other Construction works
for use by the occupants.
The Fire hose reels are
manufactured in both Manual &
Automatic version to comply
EN 671-1:2001 standard with
semi-rigid hose complying with
EN694:2001 standards.

Features:

Type

Model No.

Hose Diameter & Length

Reel Height (A in mm)

Reel Width (B in mm)

Reel Depth (C in mm)

Swinging Arm

19 NFH-020M

19mm (3/4) & 30mtr.

580

645

205

Manual

25 NFH-020M

25mm (1) & 30mtr.

580

645

235

Swinging Arm

19 NFH-020A

19mm (3/4) & 30mtr.

580

645

235

Manual

25 NFH-020A

25mm (1) & 30mtr.

580

645

235

Swinging Pipe

19 NFH-030M

19mm (3/4) & 30mtr.

665

580

200

Manual

25 NFH-030M

25mm (1) & 30mtr.

665

580

245

Swinging Pipe

19 NFH-030A

19mm (3/4) & 30mtr.

665

580

250

Manual

25 NFH-030A

25mm (1) & 30mtr.

665

580

250

Fixed

19 NFH-040M

19mm (3/4) & 30mtr.

625

580

220

Manual

25 NFH-040M

25mm (1) & 30mtr.

625

580

265

Fixed

19 NFH-040A

19mm (3/4) & 30mtr.

625

580

220

Manual

25 NFH-040A

25mm (1) & 30mtr.

625

580

260

BSI KITE Mark certified

The Fire hose reels are
capable of rotating in one
plane(Fixed type)or rotating
in more than one plane with
mounting on one of the
following, Swinging arm,
Swinging pipe or Swinging
door in Manual & Automatic
version.
The Automatic Fire hose
reels will open fully within 3
revolution of the reel
The Nozzle have SHUT, JET
& SPRAY control settings.
The minimum flow rate of
hose reels in JET & SPRAY
setting is 41 L/MIN. at 0.6
MPa (6 bar) pressure.
The effective throw range of
discharge at 0.2 MPa( 2 bar)
pressure is 10 mtrs. in JET
Setting.
The reel discs are painted
RED with printed
Instructions to use label.

Semi-Rigid Reel Hose

Product description
NAFFCO semi-rigid reel hoses
are suitable for use in fixed fire
fighting system.
The Hoses are available in size
of 19 mm & 25 mm inside
diameter.The hoses are flexible
so that it can be rolled and kept
on a drum.
The hose are intended for use
at a maximum working
pressure of 12 bar (1.2 MPa)
and temperature range -20C
to
+60C
at
ambient
temperature condition in nonaggresive or non-corrosive
atmosphere.
The semi-rigid reel hoses are
manufactured to comply with
BSEN 692 : 2001 standards.

Features:

Model
Hose Classification
Color of Hose
Bore
Length of Hose

Type A, Class 2
Red
19 mm & 25 mm
30 mtr.

Hydrostatic Properties
Maximum Working Pressure

12 Bar

Proof Pressure

24 Bar

Min. Burst Pressure

42 Bar

BSI KITE mark certified.

Materials for inner lining &
cover of hose is plasticized
PVC compound
High tensile textile polyester
yarn is used for
reinforcement of hose

Delivery Hose Couplings

Product description
NAFFCO
Couplings
are
suitable for use with delivery
hose and for fire fighting
purposes.
The delivery hose couplings are
of Instantaneous pattern, pullrelease type with ribbed tail and
are manufactured to comply BS
336 : 1989 standards.
The couplings are suitable for
use at working pressure not
exceeding 15 bar.

Features:

Model : NFAC -65 RT(For Aluminium Coupling)

Model : NFCC -65 RT(For Copper Alloy Coupling)
Type

Instantaneous Male/Female Coupling with Pull Release

Tail Ends

Ribbed Type

Test Pressure

22.5 Bar for 2 min.

Bill of Material
S.No.

Description

Material

Body of Male/Female Coupling

a. Aluminium to BS 1706 : 1998

Washer

Rubber

Spring

Spring Steel

Self Locking Nut

Aluminium

b. Copper Alloy to BS EN 12163 : 1998

BSI KITE MARK certified.

Castings are clean, sound
and free from gross
porosity.
Machined surface are within
tolerance and are in
accordance to BS 1134 -2
Coupling washers are made
of natural rubber to BS 1154
Locking of plungers is of
self-locking type.

4x2 Way Breeching Inlet

Product description
NAFFCO Breeching inlets are
suitable for installation on dry
risers only, in a building for fire
fighting purposes, fitted with
inlet connection at fire brigade
access level
and outlet
connection at specified points,
which is normally dry but
capable of being charged with
water by pumping from fire
service appliances.

Model

The Breeching inlets are

manufactured to comply BS
5041 PART-3: 1975 standard
comprising
of
Male
instantaneous
connections
complying with BS 336:1989,
drain valves complying with BS
5154,PN16 rated and nonreturn valves.

NDR095

Inlet Connection

2 Nos. Male Instantaneous Connector Complying to BS 336

Pressure Rating

Normal Working Pressure of 10 Bar

Nominal Size

100 mm Flanged Outlet

Test Pressure

20 Bar

Flange Drilling

BS 4504 part : 2 : 1974 table : 16/21

The Breeching inlets and its

fittings are suitable for a normal
working pressure of 10 bar and
for working temperature range
from 0C to 38C

Features:

Bill of Material
S.No.

Description

Material

Body

Spheroidal Graphite Cast Iron to BS EN 1563:1997

Inlet Connection & Non-Return Valves

Copper Alloy to BS EN 12163:1998

Drain Valve

Copper Alloy to BS EN 12163:1998

Blank Cap for Drain Valve

Copper Alloy to BS EN 12163:1998

Blank Cap for Inlet Connector

Plastic

BSI KITE Mark certified.

Body material made of
Spheroidal Graphite iron to
BS 1563 : 1997
Inlet connection and Nonreturn valves material made
of Copper alloy to BS
12163: 1998
Each Inlet connections are
fitted with non - return valve
and are of spring loaded
mushroom type.
Each breeching inlet are
painted RED internally and
externally.

6x4 Way Breeching Inlet

Product description
NAFFCO Breeching inlets are
suitable for installation on dry
risers only, in a building for fire
fighting purposes, fitted with
inlet connection at fire brigade
access level
and outlet
connection at specified points,
which is normally dry but
capable of being charged with
water by pumping from fire
service appliances.

Model

The Breeching inlets are

manufactured to comply BS
5041 PART-3: 1975 standard
comprising
of
Male
instantaneous
connections
complying with BS 336:1989,
drain valves complying with BS
5154,PN16 rated and nonreturn valves.

NWR115

Inlet Connection

4 Nos. Male Instantaneous Connector Complying to BS 336

Pressure Rating

Normal Working Pressure of 10 Bar

Nominal Size

150 mm Flanged Outlet

Test Pressure

20 Bar

Flange Drilling

BS 4504 part : 2 : 1974 table : 16/21

The Breeching inlets and its

fittings are suitable for a normal
working pressure of 10 bar and
for working temperature range
from 0C to 38C

Features:

Bill of Material
S.No.

Description

Material

Body

Spheroidal Graphite Cast Iron to BS EN 1563:1997

Inlet Connection & Non-Return Valves

Copper Alloy to BS EN 12163:1998

Drain Valve

Copper Alloy to BS EN 12163:1998

Blank Cap for Drain Valve

Copper Alloy to BS EN 12163:1998

Blank Cap for Inlet Connector

Plastic

BSI KITE Mark certified.

Body material made of
Spheroidal Graphite iron to
BS 1563 : 1997
Inlet connection and Nonreturn valves material made
of Copper alloy to BS
12163: 1998
Each Inlet connections are
fitted with non - return valve
and are of spring loaded
mushroom type.
Each breeching inlet are
painted RED internally and
externally.

Under Ground Hydrant

Product description
NAFFCO Under ground fire
hydrants are valves of screw
down type and are suitable for
a maximum working pressure
of 16 bar
The Under ground fire hydrants
are manufactured to comply
BS 750 : 1984 standard with
screwed outlet threaded to BS
336 : 1989 standard.

Features:

Model

NHYD 058

Nominal Size &

Flange-X

DN 80, Drilled to table 16/11 of BS 4504-1: 1969

Flange Drilling

Flange-Y

DN 50, Drilled to table 16/11 of BS 4504-1: 1969

Flange-Z

DN 50, Drilled to table 16/21 of BS 4504-2: 1969

Working Pressure
Test Pressure

16 Bar Maximum
Body

24 Bar

Seat

16 Bar

Bill of Material
S.No.

Description

Material

Body

Grey Cast Iron(C.I) to BS 1561 : 1997

Body Seating Seal

Rubber to BS 1154

Spindle

High Tensile Brass to BS 1561 : 1998

Bonnet

Grey Cast Iron(C.I) to BS 1561 : 1997

Spindle Cap

Grey Cast Iron to BS 1561 : 1997

Spindle (Stem) Seal

Rubber to BS 1154

Gland

Grey Cast Iron to BS 1561 : 1997

Gland Wiper Ring

Teflon

Outlet

High Tensile Brass to BS 1561 : 1998

10

Outlet Cap

Grey Cast Iron to BS 1561 : 1997

11

Outlet Gasket

Rubber to BS 1154

12

Drain Bolt

Forged Steel

BSI KITE Mark certified.

Body material made of Cast
iron to BS 1561 : 1997
of spindle & threaded part
of valves which engages
with it is made of High
tensile brass to BS 12163:
1998.
Material for the screwed
outlet is made of High
tensile brass to BS 12163:
1998.
Spindle sealings (two seals)
is of the toroidal sealing ring
('O' ring) type and are
capable of changing while
the valve is under pressure
and fully closed.
A Wiper ring is positioned
above the spindle sealings
to prevent the ingress of
foreign matter.
All Cast iron parts are
thoroughly cleaned and
BLACK painted.

QUALITY SYSTEM
National Fire Fighting Manufacturing FZCO. is certified to ISO 9001 Quality System by Loss
Prevention Certification Board, U.K. and Bureau Veritas Quality International. Manufacturing
process are based on a quality control system, that ensures conformity of raw materials,
well monitored process control techniques and vigilant final inspection, giving a
consistently high quality finished product.

APPROVALS
Quality assurance is of paramount importance in NAFFCOs priorities. NAFFCO has been
awarded with product approvals like Kite Mark, CE Mark etc. against a wide range of Fire
Extinguishers, Fire Hose Reels and Fire Fighting Equipments.

ENGINEERING CAPABILITIES
NAFFCO is backed by a team of professionals who are well qualified and specialized in
their respective field viz - Design, Development, Production and Project Implementation.
Our investment in applied research and development program concentrates on innovations
which meets customer needs.

PRODUCT RANGE

We reserve the right to modify specifications without prior notice

Our Aim is to become your supplier of choice while focusing

on value added products and services that matter most to you

NATIONAL FIRE FIGHTING MANUFACTURING FZCO

PO Box 17014, Dubai, United Arab Emirates.
Tel 971 4 881 5653, Fax 971 4 881 6229
Email: [email protected]
www.naffco.com