Scribd
Upload
203 views35 pages

DDCA Ch4 VHDL

This chapter discusses digital design and computer architecture topics including combinational logic, sequential logic, finite state machines, and hardware description languages. It introduces VHDL as a hardware description language used to specify logic functions and simulate and synthesize digital circuits. The chapter describes how VHDL code can be used to model combinational logic functions, sequential logic like flip-flops and latches, and finite state machines. It provides examples of VHDL code for basic gates, flip-flops, and other digital components.

Uploaded by

Yerhard Lalangui Fernández
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
203 views35 pages

DDCA Ch4 VHDL

This chapter discusses digital design and computer architecture topics including combinational logic, sequential logic, finite state machines, and hardware description languages. It introduces VHDL as a hardware description language used to specify logic functions and simulate and synthesize digital circuits. The chapter describes how VHDL code can be used to model combinational logic functions, sequential logic like flip-flops and latches, and finite state machines. It provides examples of VHDL code for basic gates, flip-flops, and other digital components.

Uploaded by

Yerhard Lalangui Fernández
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

Chapter 4

Digital Design and Computer Architecture, 2nd Edition


David Money Harris and Sarah L. Harris

Chapter 4 <1>

Chapter 4 :: Topics

Introduction
Combinational Logic
Structural Modeling
Sequential Logic
More Combinational Logic
Finite State Machines
Parameterized Modules
Testbenches
Chapter 4 <2>

Introduction
Hardware description language (HDL):
specifies logic function only
Computer-aided design (CAD) tool produces or
synthesizes the optimized gates

Most commercial designs built using HDLs


Two leading HDLs:
SystemVerilog
developed in 1984 by Gateway Design Automation
IEEE standard (1364) in 1995
Extended in 2005 (IEEE STD 1800-2009)

VHDL 2008
Developed in 1981 by the Department of Defense
IEEE standard (1076) in 1987
Updated in 2008 (IEEE STD 1076-2008)
Chapter 4 <3>

HDL to Gates
Simulation
Inputs applied to circuit
Outputs checked for correctness
Millions of dollars saved by debugging in simulation
instead of hardware

Synthesis
Transforms HDL code into a netlist describing the
hardware (i.e., a list of gates and the wires connecting
them)

IMPORTANT:
When using an HDL, think of the hardware the HDL
should produce
Chapter 4 <4>

VHDL Modules
a
b
c

VHDL
Module

Two types of Modules:


Behavioral: describe what a module does
Structural: describe how it is built from simpler
modules

Chapter 4 <5>

VHDL: example
VHDL:
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity sillyfunction is
port(a, b, c: in STD_LOGIC;
y:
out STD_LOGIC);
end;
architecture synth of sillyfunction is
begin
y <= (not a and not b and not c) or
(a and not b and not c) or
(a and not b and c);
end;

Chapter 4 <6>

HDL Simulation
VHDL:
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity sillyfunction is
port(a, b, c: in STD_LOGIC;
y:
out STD_LOGIC);
end;
architecture synth of sillyfunction is
begin
y <= (not a and not b and not c) or (a and not b and not
c) or (a and not b and c);
end;

Chapter 4 <7>

HDL Synthesis
VHDL:
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity sillyfunction is
port(a, b, c: in STD_LOGIC;
y:
out STD_LOGIC);
end;
architecture synth of sillyfunction is
begin
y <= (not a and not b and not c) or (a and not b and not
c) or (a and not b and c);
b
end;
c

un5_y

Synthesis:

un8_y

Chapter 4 <8>

VHDL Syntax
Case sensitive
Example: reset and Reset are not the same signal.

No names that start with numbers


Example: 2mux is an invalid name

Whitespace ignored
Comments:
-- single line comment
/* multiline
comment */

Chapter 4 <9>

Bitwise Operators
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity inv is
port(a: in STD_LOGIC_VECTOR(3 downto 0);
y: out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture synth of inv is
begin
y <= not a;
end;

-single line comment


/**/ multiline comment

Chapter 4 <10>

Bitwise Operators
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity gates is
port(a, b: in STD_LOGIC_VECTOR(3 downto 0);
y1, y2, y3, y4,
y5: out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture synth of gates is
begin
y1 <= a and b;
y2 <= a or b;
y3 <= a xor b;
y4 <= a nand b;
y5 <= a nor b;
end;
Chapter 4 <11>

Reduction Operators
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity and8 is
port(a: in STD_LOGIC_VECTOR(7 downto 0);
y: out STD_LOGIC);
end;
architecture synth of and8 is
begin
y <= and a;
and a is much easier to write than
y <= a(7) and a(6) and a(5) and a(4) and

a(3) and a(2) and a(1) and a(0);


end;

Chapter 4 <12>

Conditional Assignment
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity mux2 is
port(d0, d1: in STD_LOGIC_VECTOR(3 downto 0);
s:
in STD_LOGIC;
y:
out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture synth of mux2 is
begin
y <= d1 when s else d0;
end;

Chapter 4 <13>

Internal Variables
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity fulladder is
port(a, b, cin: in STD_LOGIC;
s, cout:
out STD_LOGIC);
end;
architecture synth of fulladder is
signal p, g: STD_LOGIC;
begin
p <= a xor b;
g <= a and b;
s <= p xor cin;
cout <= g or (p and cin);
end;

cin

cout

a
b

un1_cout

Chapter 4 <14>

cout

Precedence
Order of operations

Highest

Lowest
Chapter 4 <15>

Numbers
Format: NBvalue
N = number of bits, B = base (B binary, D decimal, X hexadecimal)
NB is optional but recommended (default is binary)

Chapter 4 <16>

Z: Floating Output
VHDL:
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity tristate is
port(a: in STD_LOGIC_VECTOR(3 downto 0);
en: in STD_LOGIC;
y: out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture synth of tristate is
begin
y <= a when en else ZZZZ;
end;

en
a[3:0]

[3:0]

[3:0]

[3:0]

[3:0]

y[3:0]

y_1[3:0]
Chapter 4 <17>

Delays
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity example is
port(a, b, c: in STD_LOGIC;
y:
out STD_LOGIC);
end;
architecture synth of example is
signal ab, bb, cb, n1, n2, n3: STD_LOGIC;
begin
ab <= not a after 1 ns;
bb <= not b after 1 ns;
cb <= not c after 1 ns;
n1 <= ab and bb and cb after 2 ns;
n2 <= a and bb and cb after 2 ns;
n3 <= a and bb and c after 2 ns;
y <= n1 or n2 or n3 after 4 ns;
end;

In VHDL, the after clause is used to indicate delay.


The units, in this case, are specified as nanoseconds.
Chapter 4 <18>

Sequential Logic
VHDL uses Idioms to describe latches,
flip-flops and FSMs
Other coding styles may simulate correctly
but produce incorrect hardware

Chapter 4 <19>

Behaviour Description
Behaviour description is done with the aid of:
Processes (sensitivity list)
Control structures
Functions

Process

Statements are actually


concurrent

Process Statement
General Structure:
process(sensitivity list) begin
statement;
end process;
Whenever the event in sensitivity list occurs,
statement is executed

Chapter 4 <22>

D Flip-Flop
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity flop is
port(clk: in STD_LOGIC;
d: in STD_LOGIC_VECTOR(3 downto 0);
q: out STD_LOGIC_VECTOR(3 downto 0));
end;

architecture synth of flop is


begin
process(clk) begin
if rising_edge(clk) then
q <= d;
end if;
end process;
end;

Chapter 4 <23>

Resettable D Flip-Flop
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity flopr is
port(clk, reset: in STD_LOGIC;
d:
in STD_LOGIC_VECTOR(3 downto 0);
q:
out STD_LOGIC_VECTOR(3 downto 0));
end;

architecture synchronous of flopr is


begin
process(clk) begin
if rising_edge(clk) then
if reset then q <= 0000;
else q <= d;
end if;
end if;
end process;
end;

clk
d[3:0]
reset

[3:0]

[3:0]

D[3:0]
R

Q[3:0]

[3:0]

[3:0]

q[3:0]
Chapter 4 <24>

q[3:0]

Resettable D Flip-Flop
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity flopr is
port(clk, reset: in STD_LOGIC;
d:
in STD_LOGIC_VECTOR(3 downto 0);
q:
out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture asynchronous of flopr is
begin
process(clk, reset) begin
if reset then
q <= "0000";
elsif rising_edge(clk) then
q <= d;
end if;
end process;
end;

clk
d[3:0]

[3:0]

[3:0]

D[3:0]

Q[3:0]
R

reset

q[3:0]
Chapter 4 <25>

[3:0]

[3:0]

q[3:0]

D Flip-Flop with Enable


library IEEE; use IEEE.STD_LOGIC_1164.all;
entity flopenr is
port(clk,
reset,
en: in STD_LOGIC;
d: in STD_LOGIC_VECTOR(3 downto 0);
q: out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture asynchronous of flopenr is
asynchronous reset
begin
process(clk, reset) begin
if reset then
q <= "0000";
elsif rising_edge(clk) then
if en then
q <= d;
end if;
end if;
end process;
end;

Chapter 4 <26>

Multiple D Flip-Flop
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity sync is
port(clk: in STD_LOGIC;
d: in STD_LOGIC;
-- WHAT ELSE?
q: out STD_LOGIC);
end;
architecture good of sync is
signal n1: STD_LOGIC;
begin
process(clk) begin
if rising_edge(clk) then
n1 <= d;
q <= n1;
end if;
end process;
end;

n1 must be declared as a signal because it is an internal signal used in the


module.

Chapter 4 <27>

Latch
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity latch is
port (clk: in STD_LOGIC;
d: in STD_LOGIC_VECTOR (3 downto 0);
q: out STD_LOGIC_VECTOR (3 downto 0));
end;
architecture synth of latch is
begin
process (clk, d) begin
if clk == 1 then q <= d;
end if;
end process;
d[3:0]
clk
end;

[3:0]

[3: 0]

lat
D[3:0]
C

Q[ 3:0]

[3:0] [ 3: 0]

q[3:0]

q[3:0]
The sensitivity list contains both clk and d, so the process
evaluates anytime clk or d changes. If clk is HIGH, d flows
through to q.

Chapter 4 <28>

Other Behavioral Statements


Statements that must be inside process
statements:
if / else
case, casez

Chapter 4 <29>

Combinational Logic using process


library IEEE; use IEEE.STD_LOGIC_1164.all;
entity inv is
port(a: in STD_LOGIC_VECTOR(3 downto 0);
y: out STD_LOGIC_VECTOR(3 downto 0));
end;
architecture proc of inv is
begin
process(all) begin
y <= not a;
end process;
end;
process(all) reevaluates the statements inside the process any time any of the signals
in the process change. It is equivalent to process(a) but is better because it avoids
mistakes if signals in the process are renamed or added.
The begin and end process statements are required in VHDL even though the process
contains only one assignment.
Chapter 4 <30>

Combinational Logic using case


library IEEE; use IEEE.STD_LOGIC_1164.all;
entity seven_seg_decoder is
port(data:
in STD_LOGIC_VECTOR(3 downto 0);
end;

segments: out STD_LOGIC_VECTOR(6 downto 0));

architecture synth of seven_seg_decoder is


begin
process(all) begin

case data is
when X"0" => segments <= "1111110";
when X"1" => segments <= "0110000";
when X"2" => segments <= "1101101";
when X"3" => segments <= "1111001";
when X"4" => segments <= "0110011";
when X"5" => segments <= "1011011";
when X"6" => segments <= "1011111";
when X"7" => segments <= "1110000";
when X"8" => segments <= "1111111";
when X"9" => segments <= "1110011";
when others => segments <= 0000000;
end case;
end process;
end;
The case statement checks the value of data. When data is 0, the statement performs the action after the
=>, setting segments to 1111110. The case statement similarly checks other data values up to 9 (note
the use of X for hexadecimal numbers). The others clause is a convenient way to define the output for
all cases not explicitly listed, guaranteeing combinational logic.

Chapter 4 <31>

Combinational Logic using case


case statement implies combinational logic
only if all possible input combinations described
Remember to use others statement

Chapter 4 <32>

Finite State Machines (FSMs)


Three blocks:
next state logic
state register
output logic

inputs

next
state
logic

CLK
next
k state
k

state

output
logic

Chapter 4 <33>

outputs

FSM Example: Divide by 3

The double circle indicates the reset state


Chapter 4 <34>

FSM in VHDL
library IEEE; use IEEE.STD_LOGIC_1164.all;
entity divideby3FSM is
port(clk, reset: in STD_LOGIC;
y:
out STD_LOGIC);
end;
architecture synth of divideby3FSM is
type statetype is (S0, S1, S2);
signal state, nextstate: statetype;
begin
state register
process(clk, reset) begin
if reset then state <= S0;
elsif rising_edge(clk) then
state <= nextstate;
end if;
end process;
next state logic
nextstate <= S1 when state = S0 else
S2 when state = S1 else
S0;
output logic
y <= 1 when state = S0 else 0;
end;

This example defines a new


enumeration data type, statetype,
with three possibilities: S0, S1,
and S2. state and nextstate are
statetype signals. By using an
enumeration instead of choosing
the state encoding, VHDL frees
the synthesizer to explore
various state encodings to
choose the best one.
The output, y, is 1 when the state
is S0. The inequality comparison
uses /=. To produce an output of
1 when the state is anything but
S0, change the comparison to
state /= S0.
Chapter 4 <35>

You might also like