Scribd
Upload
629 views2 pages

ABB Cast Iron Motors Specifications

This document provides specifications for ABB cast iron motors in various sizes ranging from 71mm to 400mm. It includes details on materials, paint coatings, bearings, seals, lubrication, terminal boxes, connections, fans, windings, rotors, balancing, heating elements, and enclosures. The motors use cast iron, painted blue as the main material. Bearings, seals, and lubrication vary by motor size. Terminal boxes and connections also vary in size depending on the motor. Stator and rotor windings use copper and are insulation class F. Balancing is typically half key and keyways can be open or closed depending on size. Heating elements and drain holes are optional on some motor sizes. Enc

Uploaded by

Ngoãn Nguyễn Đức
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
629 views2 pages

ABB Cast Iron Motors Specifications

This document provides specifications for ABB cast iron motors in various sizes ranging from 71mm to 400mm. It includes details on materials, paint coatings, bearings, seals, lubrication, terminal boxes, connections, fans, windings, rotors, balancing, heating elements, and enclosures. The motors use cast iron, painted blue as the main material. Bearings, seals, and lubrication vary by motor size. Terminal boxes and connections also vary in size depending on the motor. Stator and rotor windings use copper and are insulation class F. Balancing is typically half key and keyways can be open or closed depending on size. Heating elements and drain holes are optional on some motor sizes. Enc

Uploaded by

Ngoãn Nguyễn Đức
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cast iron motors in brief, basic design

Motor size
Stator

71

80

90

100

112

Material
Paint colour shade

Cast iron GG 20/GRS 200


Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack PUR-paint, thickness 60 m

Bearing end shields Material

132

160

180

Two-pack epoxy
paint,thickness 70m

Cast iron GG 15/GRS 150

Paint colour shade

Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack PUR-paint, thickness 60 m

Bearings

D-end = N-end

6202
2RS C3

Axially-locked
bearings

Inner bearing cover

On request

As standard, locked
at D-end

Bearing seal

2RS-integral seals

Axial seal as standard,


radial seal on request

Lubrication

Greased for life.


Regreasing nipples optional in sizes 160 to 180

SPM-nipples

Optional

Stainless steel 0.80 Cr 18 Ni9

Stainless steel,
SS-EN 10088, 0.5mm

6204
2RS C3

6205
2RS C3

6206
2RS C3

Two-pack epoxy
paint,thickn. 70m
6207
2RS C3

Rating plate

Material

Terminal box

Frame material
Cast iron GG 15/GRS 150
Cover material
Cast iron GG 15/GRS 150
Cover screws material Steel 5G, coated with zinc and yellow cromated

Connections

Cable entries

2xPg11

Terminals

6 terminals for connection with cable lugs (not included)

Fan

Material

Reinforced glass fiber

Fan cover

Material
Paint colour shade

Steel
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack PUR-paint, thickness 60 m

Material
Insulation

Copper
Insulation class F

Winding protection

On request

Material

Pressure die-cast aluminium

Stator winding

Rotor winding

2xPg16

2xPg16

Balancing method

Half key balancing as standard

Key ways

Open key way

Heating elements

On request

25 W

25 W

2xPg21

2xPg21

6309
Z/C3

2xPg29

6310Z/C3

2xPg29

Two-pack epoxy
polyester paint,
thickness 50 m

Closed key-way
25 W

Drain holes

Optional

Enclosure

IP 55, higher protection on request

Cooling method

IC 411

56

2xPg21

6208
2RS C3

25 W

25 W

25 W

25 W

25 W

ABB Motors / Graugu / Kat. BA/M2BA GB 98-09

Cast iron motors in brief, basic design


Motor size
Stator

200

Axially-locked
bearings

250

280

315

355

Material
Paint colour shade

Cast iron GG 15/GRS 150


Cast iron GG 20/GRS 200
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack epoxy paint, thickness 70 m

Bearing end shields Material

Bearings

225

400

Cast iron GG 15/GRS 150

Paint colour shade

Cast iron GG 20/GRS 200, except flange-mounted


sizes 355-400 Spheroidal graphit GGG40/GRP400
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack epoxy paint, thickness 70 m

D-end

2-pole
4-12 -pole

6312-Z/C3 6313-Z/C3 6315-Z/C3 6316-C4


6316-C3

6316-C4
6319-C3

6319M/C4
6322-C3

6319M/C4
6322-C3

N-end

2-pole
4-12 -pole

6312-Z/C3 6313-Z/C3 6315-Z/C3 6316-C4


6316-C3

6316-C4
6316-C3

6319M/C4
6319-C3

6319M/C4
6319-C3

Inner bearing cover

As standard, locked at D-end

Bearing seals

Axial seal as standard,


radial seal on request

V-ring as standard, radial seal on request

Lubrication

Greased for life or regreasable


bearings

Regreasable bearings, regreasing nipples, M10x1

SPM-nipples

Optional

As standard

Rating plate

Material

Stainless steel, SS-EN 10088,


thickness 0.5 mm

Terminal box

Frame material
Cover material
Cover screws material

Cast iron GG 15/GRS 150


Cast iron GG 15/GRS 150
Steel 5G, coated with zinc and yellow cromated

Connections

Cableentries

2xPg36

2-, 4-pole
6-pole

2xPg36

2xPg42

Acid proof stainless steel AISI 316


thickness 0.6 mm

2xPg42
2xPg36

2xPg48
2xPg42

Terminals

6 terminals for connection with cable lugs (not included)

Fan

Material

Reinforced glass fiber

Fan cover

Material
Paint colour shade

Steel
Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G, RAL 5014

Paint thickness

Two-pack epoxypolyesterpaint,
thickness 50 m

Material
Insulation

Copper
Insulation class F

Winding protection

3 pcs thermistors as standard

Material

Pressure die-cast aluminium

Stator winding

Rotor winding

Half key balancing as standard

Key way

Closed key way


On request

25 W

50 W

Two-pack epoxypolyesterpaint,
thickness 80 m

Pressure die-cast aluminium or copper

Open key way


50 W

Drain holes

Optional

Enclosure

IP 55, higher protection on request

Cooling method

IC 411

ABB Motors / Graugu / Kat. BA/M2BA GB 98-09

2x80
2x60/80

Reinforced glass fiber, aluminium


or polypropylene with metal hub

Balancing method

Heating elements

2x60/80
2x60

50 W

2x50 W

2x65 W

2x65 W

As standard, open on delivery

57

You might also like