Scribd
Upload
447 views6 pages

Digital Object Counter: A Mini Project Report On

This document is a mini project report submitted by Mohd Sajid to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report describes a digital object counter circuit designed under the guidance of Associate Professor Hilal Ahmed Malik. The circuit uses a 555 timer in monostable and astable modes along with a 7490 decade counter and 7447 display driver to count objects blocking a light sensor and display the count on a 7-segment display from 0 to 9.

Uploaded by

Haniya Princexx Kousar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
447 views6 pages

Digital Object Counter: A Mini Project Report On

This document is a mini project report submitted by Mohd Sajid to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report describes a digital object counter circuit designed under the guidance of Associate Professor Hilal Ahmed Malik. The circuit uses a 555 timer in monostable and astable modes along with a 7490 decade counter and 7447 display driver to count objects blocking a light sensor and display the count on a 7-segment display from 0 to 9.

Uploaded by

Haniya Princexx Kousar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

A

MINI PROJECT REPORT ON

DIGITAL OBJECT COUNTER


IN THE PARTIAL FULFILLMENT OF
BACHELOR OF TECHNOLOGY
IN
ELECTRONICS AND COMMUNICATION ENGINEERING

BY
MOHD SAJID
12081A0452

UNDER THE GUIDANCE OF


Associate Prof. HILAL AHMED MALIK

SHADAN COLLEGE OF ENGINEERING AND TECHNOLOGY


HIMAYATSAGAR ROAD, PEERANCHERU, HYDERABAD-500 008
(AFFILIATED TO J.N.T.U. HYDERABAD)
2014-2015

CERTIFICATE

This is to certify that the report on the mini project entitled DIGITAL

OBJECT COUNTER has been submitted By MOHD SAJID bearing Roll


No. 12081A0452, under the guidance of Associate Prof. HILAL AHMED MALIK
in the partial fulfilment of the requirement for the award of the degree of Bachelor of
Technology in Electronics and Communication Engineering affiliated to Jawaharlal
Nehru Technological University, Kukatpally, Hyderabad.

Date:
Place: HYDERABAD

INTERNAL GUIDE

Prof. M.A.MUBEEN

Associate Prof. HILAL MALIK

HOD, Department of

ECE,
SCET, Hyderabad.

DECLARATION

I hereby declare that the mini project entitled, DIGITAL OBJECT

COUNTER completed and written by me has not previously formed the basis for
the award of the degree of Bachelor of Technology in Electronics and Communication
Engineering.

Date:

MOHD SAJID

Place: HYDERABAD

12081A0452

Signature of the Student

ACKNOWLEDGMENT
I am immensely grateful to my mini project guide Mr. HILAL AHMED
MALIK, Associate professor in Shadan College of Engineering & Technology,
Hyderabad for all the support, encouragement and valuable guidance offered by him
and valuable advice by our Mini-Project Co-ordinator Mr. MOHAMMED ABDUL
MUBEEN, Associate Prof. throughout the course of my mini project.

Finally I am thankful to one and all who have helped me directly or indirectly
to complete this mini project successfully.

MOHD SAJID
12081A0452

Examination Approval Sheet


The mini project report entitled "DIGITAL OBJECT COUNTER" By
MOHD SAJID bearing Roll No.12081A0452 is approved for the degree of Bachelor
of Technology (Electronics and Communication Engineering) of Jawaharlal Nehru
Technological University, Kukatpally, Hyderabad.

Examiners
1

Head of the Department

External Examiner

Internal Examiner

Mini-Project Co-ordinator

Date

Place : HYDERABAD

ABSTRACT
5

555timer configured in monostable mode is a simple automatic dark


sensor that gives output when light falling on LDR is blocked. Pin 3 of monostable
circuit has been connected to pin 4 of astable timer. When monostable circuit
generates output, astable mode timer starts giving pulses to the counter module
Frequency for counter module is set up using R4, R3 and C2. 7490 acts as a decade
counter and 7447 uses the output of 7490 to display numbers on seven segment
display.
This circuit counts from 0 to 9. The 555-astable multivibrator gives pulse to
7490, for each pulse it outputs 4 bits which are interpreted by 7447 and displayed as
numbers on seven segment display.

You might also like