PowerTech
6090HFU84 Diesel Engine - 300 KvA
GENERATORSETPOWERUNITSPECIFICATIONS
Pictures
General data
Model
y
Number of cylinders
Displacement L (cu in)
Bore and stroke mm (in)
Compression ratio
Corresponding bare engine
6090HFU84
In-Line 6
9.0 (549)
118.4 x 136 (4.66 x 5.35)
16.0 : 1
Injection Type
p
Aspiration
Length mm (in)
Width mm (in)
Height mm (in)
Weight, dry kg (lb)
High Pressure Common Rail
g (Air
( cooled))
Turbocharged
1755 (69)
1072 (42.2)
1625 (64)
1089 (2400)
6090HFG84
Ratings
Prime power at 50 Hz (1500 rpm)
Standby power at 50 Hz (1500 rpm)
277 kW (376 hp)
304 kW (413 hp)
Prime power at 60 Hz (1800 rpm)
Standby power at 60 Hz (1800 rpm)
282 kW (378 hp)
315 kW (428 hp)
Prime power is the nominal power an engine is capable of delivering with a variable load for an unlimited number of hours per year. This rating
conforms to ISO 3046 and SAE J1995.
Standby power is the nominal engine power available at varying load factors for up to 500 hours per year. This rating conforms to ISO 3046 and SAE
J1995. The calculated generator set rating range for standby applications is based on minimum engine power (nominal -5%) to provide 100% meetor-exceed performance for assembled standby generator sets.
Certification
EU Stage III A
Photographs may show non-standard equipment.
PowerTech
TM
6090HFU84 Diesel Engine
for Generator Set Applications
Performance data
Fan power
Engine Model
Hz (rpm)
Generator
efficiency %
kW
hp
6090HFU84
6090HFU84
50
60
90 - 94
90 - 94
5.0
8.8
8
8
8
11.8
11
8
Power factor
0.8
0.8
0
8
Calculated generator set output
Prime
Standby
kWe
kVA
kWe
kVA
244 - 255
305 - 319
269 - 281
336 - 351
249 - 261
311 - 326
274 - 287
343 - 359
Dimensions
Length : 1755 mm
Height : 1625 mm
Width : 1072 mm
Features and benefits
High performance
Maintenance and service
4 valves head, High Pressure Common Rail System with electronic
control and air to air after cooling provides exceptional power density,
load response characteristics and fuel efficiency
Turbocharger characteristics matched for optimum performance
at 1500 rpm
Cooling package optimised to enhance performance and fuel
efficiency
ffi i
Fan designed to minimise power consumption and thus maximise
fuel efficiency
Direct injection system for better fuel efficiency
All control and maintenance points located on
RH side and easily accessible
Control and diagnostic via CAN bus communication
500 hours oil change interval as standard
Oil drain valve available
Developped for prime power usage
R
Replaceable
l
bl cylinder
li d liliners ffor easy engine
i overhaul
h l
Reliability and durability
Off highway industrial engine base
Heavy duty air cleaner available for the most severe working
environments
Two stage fuel filtration with water detection
Default
a monitoring
o o g by electronic
o control
o o and
a d possibility
poss b y
of alarms, derates or shut-down
Ease of integration
Standard fan guard and belt guard conform to EU
machinary directive
Cooling package designed for enclosures up to 200 Pa
air restrictions and 47C ambient air temperature
Blower fan as standard
Same Power Unit for 50 and 60 Hz applications
Front feet design includes cooling package mountings
g
radiator and charge
g air cooler enable a
Integrated
compact design
Specific options available for marine applications.
Cost efficient design
Environment friendly
Simple turbocharger
Easy to use
50 / 60 Hz frequency switchable
See through expansion tank for quick coolant level
check
Easy modification of governing parameters in case of
multiple Genset Usage (paralleling)
Electronic systems allows engine performances monitoring
and easy diagnostic
Direct injection provides excellent cold start-ability
High Pressure Common Rail system : higher injection
pressure variable timing control and multiple injections
enable to meet emissions while reducing fuel
consumption, noise and vibrations levels
Clean engine environment with optional crankcase
ventilation system
Low noise fan design
Usine de Saran
3601 W. Ridgeway Ave.
All values at rated speed and power with standard options unless otherwise noted.
La Foulonnerie - B.P. 11013
PO Box 5100
Specifications and design subject to change without notice.
45401 Fleury les Aubrais Cedex - France
Waterloo, IA 50704-5100
Phone: 33.2.38.82.61.19
Phone : 800.553.6446
Fax: 33.2.38.82.60.00
Fax : 319.292.5075
2010 JOHN DEERE
