EN - For pricing and availability in your local country please visit one of the below links:

DE - Informationen zu Preisen und Verfgbarkeit in Ihrem Land erhalten Sie ber die unten aufgefhrten Links:
FR - Pour connatre les tarifs et la disponibilit dans votre pays, cliquez sur l'un des liens suivants:
6ED1 052-1FB00-0BA6

EN
This Datasheet is presented by
the manufacturer

6ED1 052-1HB00-0BA6

DE
Dieses Datenblatt wird vom
Hersteller bereitgestellt

6ED1 052-1MD00-0BA6

FR
Cette fiche technique est
prsente par le fabricant

Siemens AG 2011

LOGO! logic module

2/2
2/2

Introduction
LOGO! logic module

2/3
2/3
2/6
2/8
2/11
2/13
2/18

2/22

LOGO! modular
LOGO! modular basic versions
SIPLUS LOGO! modular basic versions
LOGO! modular pure versions
SIPLUS LOGO! modular pure versions
LOGO! modular expansion modules
SIPLUS LOGO! modular expansion
modules
LOGO! CM EIB/KNX communication
module
AS-Interface connection for LOGO!

2/23
2/23
2/33

LOGO!Power
LOGO!Power
SIPLUS LOGO!Power

2/35

LOGO!Contact

2/36

LOGO! software

2/21

Brochures
For brochures serving as selection
guides for SIMATIC products refer to:
http://www.siemens.com/simatic/
printmaterial
Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

Introduction
LOGO! logic module

Overview

General technical data of the SIPLUS LOGO

Ambient temperature range

-40/-25 ... +70 C

Conformal coating

Coating of the printed circuit

boards and the electronic components

Technical data

The technical data of the

standard product applies except
for the ambient conditions.

Ambient conditions

LOGO! logic module

The compact, easy-to-use and low-cost solution for simple
control tasks
Compact, easy to operate, universally applicable without
accessories
"All in one": Integrated display and operator panel
36 different functions can be connected at the click of a button
or by means of PC software; up to 130 times over
Functions are easily changed at the press of a key. No more
time-consuming rewiring
SIPLUS LOGO!
The controller for use in the toughest ambient conditions
With extended temperature range from -40/-25 C to +70 C
Suitable for medial exposure (harmful gas atmosphere)
Condensation permissible
With the proven PLC technology of LOGO!
Easy to handle, program, maintain, and service
Ideal for use in automotive engineering, environmental
engineering, mining, chemical plants, conveying technology,
food industry, etc.
Accessories:
The front plate mounting set also allows simple and reliable
installation of the logic modules in front plates; IP65 protection
is thus possible.
In order to ensure dependable operation of SIPLUS devices
supplied by the battery in conjunction with combustion
engines, it is necessary to put in a SIPLUS upmiter upstream
device between the battery and the SIPLUS LOGO!.
For further information, please go to:
www.siemens.com/siplus-extreme
For brochures serving as selection guides for SIMATIC products
refer to:
www.siemens.com/simatic/printmaterial

2/2

Siemens ST 70 2011

Relative humidity

5 ... 100%, condensation allowed

Biologically active substances

Conformity with EN 60721-3-3,

Class 3B2 mold and fungal
spores (except fauna)

Chemically active substances

Conformity with EN 60721-3-3,

Class 3C4 incl. salt mist and ISA
S71.04 severity level G1; G2; G3;
GX 1)2)

Mechanically active substances

Conformity with EN 60721-3-3,

Class 3S4 including conductive
sand, dust 2)

Air pressure (depending on the

highest positive temperature range
specified)

1080 ... 795 hPa

(-1000 ... +2000 m)
see ambient temperature range
795 ... 658 hPa (+2000 ... 3500 m)
derating 10 K
658 ... 540 hPa
(+3500 ... +5000 m)
derating 20 K

1)

2)

ISA-S71.04 severity level GX:

Long-term load:
SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm;
HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d):
SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm;
HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
The supplied plug covers must remain in place over the unused
interface when operated in atmospheres containing corrosive gases!

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular basic versions

Overview
The space-saving basic versions
Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
With connection option for LOGO! TD text display (can be
connected to all LOGO! 0BA6 basic versions)

Technical specifications
Supply voltages
Rated value
12 V DC
24 V DC
115 V DC
230 V DC
Permissible range, lower
limit (DC)
Permissible range, upper
limit (DC)
24 V AC
115 V AC
230 V AC
Permissible range, lower
limit (AC)
Permissible range, upper
limit (AC)
Time
Time switching clocks
Power reserve

6ED1 052-1CC01-0BA6

6ED1 052-1MD00-0BA6

6ED1 052-1HB00-0BA6

Yes

Yes
Yes

Yes

6ED1 052-1FB00-0BA6

20.4 V

10.8 V

20.4 V

Yes
Yes
100 V

28.8 V

28.8 V

28.8 V

253 V

Yes

20.4 V

Yes
Yes
85 V

26.4 V

265 V

80 h

80 h

80 h

80 h

8; of which 4 can be used

in analog mode (0 to 10 V)

8; of which 4 can be used

in analog mode (0 to 10 V)

Digital outputs
Number of digital outputs

4; Transistor

4; Relay

4; Relay

4; Relay

Short-circuit protection

Yes; electrical (1 A)

No; external fusing

necessary

No; external fusing

necessary

No; external fusing

necessary

Output current
for signal "1" permissible
range for 0 to 55 C, max.

0.3 A

3A
10 A

3A
10 A

3A
10 A

Yes

Yes

Yes

Digital inputs
Number of digital inputs

Relay outputs
Switching capacity of
contacts
with inductive load, max.
with resistive load, max.
EMC
Emission of radio interference
acc. to EN 55 011
Emission of radio interference acc. to EN 55 011
(limit value class B)

Yes; Radio interference

suppression according to
EN55011, limit value
class B

Siemens ST 70 2011

2/3

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular basic versions

Technical specifications (continued)

6ED1 052-1CC01-0BA6

6ED1 052-1MD00-0BA6

6ED1 052-1HB00-0BA6

6ED1 052-1FB00-0BA6

Environmental
requirements
Operating temperature
Min.
Max.

0 C
55 C

0 C
55 C

0 C
55 C

0 C
55 C

Degree of protection
IP20

Yes

Yes

Yes

Yes

Standards, approvals,
certificates
CSA approval

Yes

Yes

Yes

Yes

Developed according to
IEC1131

Yes

Yes

Yes

Yes

FM approval

Yes

Yes

Yes

Yes

According to VDE 0631

Yes

Yes

Yes

Yes

Marine approval

Yes

Yes

Yes

Yes

UL approval

Yes

Yes

Yes

Yes

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

Ordering data
LOGO! logic module 24C

Order No.
I

6ED1 052-1CC01-0BA6

SIPLUS LOGO! TD text display

6ED1 052-1MD00-0BA6

6AG1 055-4MH00-2BA0

(extended temperature range

-10 ... +60 C and medial
exposure)
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable
LOGO! manual

6ED1 052-1HB00-0BA6

24 V AC/DC power supply,

8x 24 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! logic module 230RC

6ED1 055-4MH00-0BA0

4-line text display, can be

connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable

12/24 V DC power supply,

8 x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V),
4 x 10 A relay outputs,
integrated time switch;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! logic module 24RC

Accessories
LOGO! TD text display

12/24 V DC power supply,

8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V),
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! logic module 12/24RC

Order No.

German

6ED1 050-1AA00-0AE7

English

6ED1 050-1AA00-0BE7

French

6ED1 050-1AA00-0CE7

Spanish

6ED1 050-1AA00-0DE7

Italian

6ED1 050-1AA00-0EE7

Chinese

6ED1 050-1AA00-0KE7

6ED1 052-1FB00-0BA6

115/230 V AC/DC power supply,

8x 115/230 V AC/DC digital
inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
I: Subject to export regulations AL: N and ECCN: EAR99H

2/4

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular basic versions

Ordering data

Order No.

LOGO! Memory Card

6ED1 056-1DA00-0BA0

Program module for copying, with

know-how protection
6ED1 056-6XA00-0BA0

Battery module for backing up the

integral real-time clock (not
LOGO! 24)
LOGO! memory/battery card

6ED1 056-7DA00-0BA0

Combined program and battery

module, with know-how protection
and for backing up the integral
real-time clock (not LOGO! 24)
6AG1 057-1AA01-0BA6

6ED1 058-0BA02-0YA0

For programming on the PC in

LAD/FBD; executes on Windows
98 SE and higher, Linux, MAC
OSX; on CD-ROM
LOGO!Soft Comfort V6.0
upgrade

LOGO! PC cable

6ED1 058-0CA02-0YE0

6ED1 057-1AA00-0BA0

For program transfer between

LOGO! and the PC
For transferring the program
between LOGO! and PC,
including driver on CD-ROM

Width 4 modular spacings

6AG1 057-1AA00-0AA0

Width 4 modular spacings,

with keys

6AG1 057-1AA00-0AA3

Width 8 modular spacings

6AG1 057-1AA00-0AA1

Width 8 modular spacings,

with keys

6AG1 057-1AA00-0AA2

Contains LOGO! 12/24RC,

LOGO! USB PC cable,
LOGO!Soft Comfort V6.0, manual,
screwdriver, information material
German

6ED1 057-3BA00-0AA5

English

6ED1 057-3BA00-0BA5

German

6ED1 057-3AA02-0AA0

English

6ED1 057-3AA02-0BA0

German

6ED1 057-3BA10-0AA0

English

6ED1 057-3BA10-0BA0

LOGO! News Box, 230 V

Upgrade from V1.0 to V6.0

LOGO! USB PC cable

Front plate mounting set

LOGO! News Box, 12/24 V

L

Programming device used to

simultaneously reproduce
program module contents on up
to 8 program modules
LOGO!Soft Comfort V6.0

6ED1 057-1CA00-0BA0

Adapter cable for analog modem

communication

LOGO! battery card

LOGO! PROM

Order No.
LOGO! modem cable

6ED1 057-1AA01-0BA0

Contains LOGO! 230RC, LOGO!

USB PC cable, LOGO!Soft
Comfort V6.0, manual, screwdriver, information material

LOGO! TD News Box, 12/24 V

Contains LOGO! 12/24RCo,
LOGO! TD, LOGO! USB PC
cable, LOGO! Soft Comfort V6.0,
manual, screwdriver, information
material

J: Subject to export regulations AL: N and ECCN: EAR99S

L: Subject to export regulations AL: 9I999 and ECCN: N

Siemens ST 70 2011

2/5

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular basic versions

Overview
The space-saving basic versions
Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
With connection option for LOGO! text display TD (can be
connected to all LOGO! 0BA6 basic versions)

Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific information was added.

SIPLUS LOGO! 24

SIPLUS LOGO! 12/24RC

SIPLUS LOGO! 24RC

SIPLUS LOGO! 230RC

Order number

6AG1 052-1CC01-2BA6

6AG1 052-1FB00-2BA6

6AG1 052-1HB00-2BA6

6AG1 052-1MD00-2BA6

Order No. based on

6ED1 052-1CC01-0BA6

6ED1 052-1FB00-0BA6

6ED1 052-1HB00-0BA6

6ED1 052-1MD00-0BA6

Ambient temperature range

-25C to +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

Ambient conditions
Relative humidity

5 ... 100 %
Condensation permissible

Biologically active
substances

Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna)

Chemically active
substances

Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2)

Mechanically active
substances

Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 2)

Air pressure (depending on 1080 ... 795 hPa (-1000 ... +2000 m)
the highest positive temper- see ambient temperature range
ature range specified)
795 ... 658 hPa (+2000 ... +3500 m)
derating 10 K
658 ... 540 hPa (+3500 ... +5000 m)
derating 20 K
1)

2)

ISA-S71.04 severity level GX: Long-term load:

SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d):
SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!

The technical documentation on SIPLUS can be found here:

www.siemens.com/siplus-extreme

2/6

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular basic versions

Ordering data
SIPLUS LOGO! 24

Order No.
I

6AG1 052-1CC01-2BA6

Order No.
Accessories

(extended temperature range and

medial exposure)

SIPLUS Upmiter upstream

device

24 V DC power supply,
8x 24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V),
4x 24 V DC digital outputs, 0.3 A;
integrated time switch;
200 function blocks can be
interlinked,
modular expansion capability

for reliable operation at the

battery of combustion engines

SIPLUS LOGO! 12/24RC

Additional accessories

6AG1 053-1AA00-2AA0

See LOGO! modular basic

versions

6AG1 052-1MD00-2BA6

(extended temperature range and

medial exposure)
12/24 V DC power supply,
8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V),
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
SIPLUS LOGO! 24RC

6AG1 052-1HB00-2BA6

(extended temperature range and

medial exposure)
24 V AC/DC power supply,
8x 24 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
SIPLUS LOGO! 230RC

6AG1 052-1FB00-2BA6

(extended temperature range and

medial exposure)
115/230 V AC/DC power supply,
8x 115/230 V AC/DC digital
inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
I: Subject to export regulations AL: N and ECCN: EAR99H
L: Subject to export regulations AL: 9I999 and ECCN: N

Siemens ST 70 2011

2/7

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular pure versions

Overview
The cost-optimized basic versions
Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
With connection option for LOGO! TD text display (can be
connected to all LOGO! 0BA6 basic versions)

Technical specifications
Supply voltages
Rated value
12 V DC
24 V DC
115 V DC
230 V DC
permissible range, lower
limit (DC)
permissible range, upper
limit (DC)
24 V AC
115 V AC
230 V AC
permissible range, lower
limit (AC)
permissible range, upper
limit (AC)
Time of day
Time switching clocks
Number
Power reserve

6ED1 052-2CC01-0BA6

6ED1 052-2MD00-0BA6

6ED1 052-2HB00-0BA6

Yes

Yes
Yes

Yes

6ED1 052-2FB00-0BA6

20.4 V

10.8 V

20.4 V

Yes
Yes
100 V

28.8 V

28.8 V

28.8 V

253 V

Yes

20.4 V

Yes
Yes
85 V

26.4 V

265 V

190
80 h

8
80 h

8
80 h

8
80 h

8; of which 4 can be used

in analog mode (0 to 10 V)

8; of which 4 can be used

in analog mode (0 to 10 V)

Digital outputs
Number of digital outputs

4; Transistor

4; Relay

4; Relay

4; Relay

Short-circuit protection

Yes; electrical (1 A)

No; external fusing

necessary

No; external fusing

necessary

No; external fusing

necessary

Output current
for signal "1" permissible
range for 0 to 55 C, max.

0.3 A

3A
10 A

3A
10 A

3A
10 A

Digital inputs
Number of digital inputs

Relay outputs
Switching capacity of
contacts
with inductive load, max.
with resistive load, max.

2/8

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular pure versions

Technical specifications (continued)

6ED1 052-2CC01-0BA6
EMC
Emission of radio interference
acc. to EN 55 011
Emission of radio interference acc. to EN 55 011
(limit value class B)

6ED1 052-2MD00-0BA6

6ED1 052-2HB00-0BA6

6ED1 052-2FB00-0BA6

2
Yes; Radio interference
suppression according to
EN55011, limit value
class B

Yes

Yes

Yes

Environmental
requirements
Operating temperature
Min.
Max.

0 C
55 C

0 C
55 C

0 C
55 C

0 C
55 C

Degree of protection
IP20

Yes

Yes

Yes

Yes

Standards, approvals,
certificates
CSA approval

Yes

Yes

Yes

Yes

Developed according to
IEC1131

Yes

Yes

Yes

Yes

FM approval

Yes

Yes

Yes

Yes

According to VDE 0631

Yes

Yes

Yes

Yes

Marine approval

Yes

Yes

Yes

Yes

UL approval

Yes

Yes

Yes

Yes

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

on 35 mm DIN rail,
4 spacing units wide
72 mm
90 mm
55 mm

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

Ordering data
LOGO! logic module 24Co

Order No.
I

6ED1 052-2CC01-0BA6

Order No.
LOGO! logic module 24RCo

24 V DC power supply,
8 digital inputs 24 V DC, of which
4 can be used in analog mode
(0 to 10 V), 4 digital outputs
24 V DC, 0.3 A, integrated time
switch; without display and
keyboard; 200 function blocks
can be interlinked, modular
expansion capability

24 V AC/DC power supply,

8 digital inputs 24 V AC/DC,
4 relay outputs 10 A, integral time
switch; without display and
keyboard; 200 function blocks
can be interlinked, modular
expansion capability

LOGO! logic module 12/24RCo

115/230 V AC/DC power supply,

8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time clock;
without display and keyboard;
200 function blocks can be interlinked,
modular expansion capability

12/24 V DC power supply,

8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be interlinked,
modular expansion capability

LOGO! logic module 230RCo

6ED1 052-2MD00-0BA6

6ED1 052-2HB00-0BA6

6ED1 052-2FB00-0BA6

I: Subject to export regulations AL: N and ECCN: EAR99H

Siemens ST 70 2011

2/9

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular pure versions

Ordering data

Order No.

Accessories

Order No.
LOGO! memory/battery card

LOGO! TD text display

6ED1 055-4MH00-0BA0

4-line text display, can be

connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable
SIPLUS LOGO! TD text display

Combined program and battery

module, with know-how protection
and for backing up the integral
real-time clock (not LOGO! 24o)
LOGO! PROM

6AG1 055-4MH00-2BA0

(extended temperature range

-10 ... +60 C and medial
exposure)

German

6ED1 050-1AA00-0AE7

LOGO!Soft Comfort V6.0

upgrade

English

6ED1 050-1AA00-0BE7

Upgrade from V1.0 to V6.0

French

6ED1 050-1AA00-0CE7

LOGO! PC cable

Spanish

6ED1 050-1AA00-0DE7

Italian

6ED1 050-1AA00-0EE7

For program transfer between

LOGO! and the PC

Chinese

6ED1 050-1AA00-0KE7

LOGO! USB PC cable

6ED1 056-1DA00-0BA0

For transferring the program

between LOGO! and PC,
including driver on CD-ROM

Program module for copying, with

know-how protection
LOGO! battery card
Battery module for backing up the
integral real-time clock (not
LOGO! 24)

6AG1 057-1AA01-0BA6

6ED1 058-0BA02-0YA0

6ED1 058-0CA02-0YE0

For programming on the PC in

LAD/FBD; executes on Windows
98 SE and higher, Linux, MAC
OSX; on CD-ROM

LOGO! manual

LOGO! Memory Card

Programming device used to

simultaneously reproduce
program module contents on up
to 8 program modules
LOGO!Soft Comfort V6.0

4-line text display, can be

connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable

6ED1 056-7DA00-0BA0

6ED1 056-6XA00-0BA0

LOGO! modem cable

6ED1 057-1AA00-0BA0

6ED1 057-1AA01-0BA0

6ED1 057-1CA00-0BA0

Adapter cable for analog modem

communication

J: Subject to export regulations AL: N and ECCN: EAR99S

L: Subject to export regulations AL: 9I999 and ECCN: N

2/10

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular pure versions

Overview
Basic versions optimized for costs
Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
With connection option for LOGO! text display TD (can be
connected to all LOGO! 0BA6 basic versions)
Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific information was added.

SIPLUS LOGO! 24o

SIPLUS LOGO! 12/24RCo

SIPLUS LOGO! 24RCo

SIPLUS LOGO! 230RCo

Order number

6AG1 052-2CC01-2BA6

6AG1 052-2MD00-2BA6

6AG1 052-2HB00-2BA6

6AG1 052-2FB00-2BA6

Order No. based on

6ED1 052-2CC01-0BA6

6ED1 052-2MD00-0BA6

6ED1 052-2HB00-0BA6

6ED1 052-2FB00-0BA6

Ambient temperature range

-40 C to +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

Ambient conditions
Relative humidity

5 ... 100 %
Condensation permissible

Biologically active
substances

Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna)

Chemically active
substances

Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISAS71.04 severity level G1; G2; G3; GX 1) 2)

Mechanically active
substances

Conformity with EN 60721-3-3, Class 3S4 including conductive sand, dust 2)

Air pressure (depending on

the highest positive temperature range specified)

1080 ... 795 hPa (-1000 ... +2000 m)

see ambient temperature range
795 ... 658 hPa (+2000 ... +3500 m)
derating 10 K
658 ... 540 hPa (+3500 ... +5000 m)
derating 20 K

1)

2)

ISA-S71.04 severity level GX: Long-term load:

SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d):
SO2 < 17.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!

The technical documentation on SIPLUS can be found here:

www.siemens.com/siplus-extreme

Siemens ST 70 2011

2/11

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular pure versions

Ordering data

Order No.

Order No.

SIPLUS LOGO! 24o

Accessories

(extended temperature range and

medial exposure)

SIPLUS Upmiter upstream

device

I
24 V DC power supply,
8 digital inputs 24 V DC, of which
4 can be used in analog mode
(0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability

6AG1 052-2CC01-2BA6

6AG1 053-1AA00-2AA0

for reliable operation at the

battery of combustion engines
Additional accessories

See LOGO! modular pure

versions, page 2/10

SIPLUS LOGO! 12/24RCo

(extended temperature range and
medial exposure)
12/24 V DC power supply,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability

6AG1 052-2MD00-2BA6

SIPLUS LOGO! 24RCo

(extended temperature range and
medial exposure)
24 V AC/DC power supply,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability

6AG1 052-2HB00-2BA6

SIPLUS LOGO! 230RCo

(extended temperature range and
medial exposure)
115/230 V AC/DC power supply,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time clock;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability

6AG1 052-2FB00-2BA6

I: Subject to export regulations AL: N and ECCN: EAR99H

L: Subject to export regulations AL: 9I999 and ECCN: N

2/12

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular expansion modules

Overview
Expansion modules for the connection to LOGO! Modular
With digital inputs and outputs, analog inputs or analog
outputs

Technical specifications
Supply voltages
Rated value
12 V DC
24 V DC
115 V DC
230 V DC
Permissible range,
lower limit (DC)
Permissible range,
upper limit (DC)
24 V AC
115 V AC
230 V AC
Permissible range,
lower limit (AC)
Permissible range,
upper limit (AC)

6ED1 055-1CB00-0BA0

6ED1 055-1HB00-0BA0

6ED1 055-1MB00-0BA1

Yes

Yes

Yes
Yes

6ED1 055-1FB00-0BA1

20.4 V

20.4 V

10.8 V

Yes
Yes
100 V

28.8 V

28.8 V

28.8 V

253 V

Yes

20.4 V

Yes
Yes
85 V

26.4 V

265 V

Digital inputs
Number of digital inputs

Digital outputs
Number of digital outputs

4; Relay

4; Relay

4; Relay

Short-circuit protection

Yes; electrical (1 A)

No; external fusing

necessary

No; external fusing

necessary

No; external fusing

necessary

3A
5A

3A
5A

3A
5A

Yes

Yes

Yes

Relay outputs
Switching capacity of
contacts
with inductive load, max.
with resistive load, max.
thermal continuous current,
max.
EMC
Emission of radio interference
acc. to EN 55 011
Emission of radio interference acc. to EN 55 011
(limit value class B)

0.3 A

Yes

Siemens ST 70 2011

2/13

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular expansion modules

Technical specifications (continued)

6ED1 055-1CB00-0BA0

6ED1 055-1HB00-0BA0

6ED1 055-1MB00-0BA1

6ED1 055-1FB00-0BA1

Environmental
requirements
Operating temperature
Min.
Max.

0 C
55 C

0 C
55 C

0 C
55 C

0 C
55 C

Degree of protection
IP20

Yes

Yes

Yes

Yes

Standards, approvals,
certificates
CSA approval

Yes

Yes

Yes

Yes

Developed according to
IEC1131

Yes

Yes

Yes

Yes

FM approval

Yes

Yes

Yes

Yes

According to VDE 0631

Yes

Yes

Yes

Yes

Marine approval

Yes

Yes

Yes

Yes

UL approval

Yes

Yes

Yes

Yes

on 35 mm DIN rail,
2 spacing units wide
36 mm; 2 DU
90 mm
55 mm

on 35 mm DIN rail,
2 spacing units wide
36 mm; 2 DU
90 mm
55 mm

on 35 mm DIN rail,
2 spacing units wide
36 mm; 2 DU
90 mm
55 mm

on 35 mm DIN rail,
2 spacing units wide
36 mm; 2 DU
90 mm
55 mm

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

Supply voltages
Rated value
24 V DC
115 V DC
230 V DC
Permissible range, lower limit (DC)
Permissible range, upper limit (DC)
115 V AC
230 V AC
Permissible range, lower limit (AC)
Permissible range, upper limit (AC)
Permissible frequency range,
lower limit
Permissible frequency range,
upper limit

6ED1 055-1CB10-0BA0

6ED1 055-1NB10-0BA0

Yes

Yes

20.4 V
28.8 V

20.4 V
28.8 V

6ED1 055-1FB10-0BA0

Yes
Yes
100 V
253 V
Yes
Yes
85 V
265 V
47 Hz
63 Hz

Digital inputs
Number of digital inputs

Input voltage
for signal "0"
for signal "1"

< 5 V DC
> 12 V DC

< 5 V DC
> 12 V DC

< 40 V AC; < 30 V DC

> 79 V AC; > 79 V DC

1 mA

1 mA

0.03 mA

2 mA

2 mA

0.08 mA

1.5 ms
1.5 ms

1.5 ms
1.5 ms

50 ms
50 ms

Input current
for signal "0", max. (permissible
quiescent current)
for signal "1", typ.
Input delay (for rated value of input
voltage)
for standard inputs
- at "0" to "1", max.
- at "1" to "0", max.

2/14

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular expansion modules

Technical specifications (continued)

6ED1 055-1CB10-0BA0

6ED1 055-1NB10-0BA0

6ED1 055-1FB10-0BA0

Digital outputs
Number of digital outputs

8; Relay

8; Relay

Short-circuit protection

Yes; electrical (1 A)

No; external fusing necessary

external fusing necessary

Lamp load, max.

1 000 W; 500 W at 115 V AC

1 000 W; 500 W at 115 V AC

Controlling a digital input

Yes

Yes

Yes

Parallel switching of 2 outputs

for increased power

No

No

No

10 Hz
0.5 Hz

2 Hz
0.5 Hz
10 Hz

2 Hz
0.5 Hz
10 Hz

3A
5A

3A
5A

Yes

Yes

Yes

Environmental requirements
Operating temperature
Min.
Max.

0 C
55 C

0 C
55 C

0 C
55 C

Degree of protection
IP20

Yes

Yes

Yes

Standards, approvals, certificates

CSA approval

Yes

Yes

Yes

Developed according to IEC1131

Yes

Yes

Yes

FM approval

Yes

Yes

Yes

According to VDE 0631

Yes

Yes

Yes

Marine approval

Yes

Yes

Yes

UL approval

Yes

Yes

Yes

on 35 mm DIN rail, 4 spacing units

wide
72 mm; 4 DU
90 mm
53 mm

on 35 mm DIN rail, 4 spacing units

wide
72 mm; 4 DU
90 mm
53 mm

on DIN rail 25 mm, 4 module

spaces wide
72 mm; 4 DU
90 mm
53 mm

Switching frequency
with resistive load, max.
with inductive load, max.
mechanical, max.
Relay outputs
Switching capacity of contacts
with inductive load, max.
with resistive load, max.
thermal continuous current, max.
EMC
Emission of radio interference acc. to
EN 55 011
Emission of radio interference acc.
to EN 55 011 (limit value class B)

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

0.3 A

6ED1 055-1MA00-0BA0
Supply voltages
Rated value
12 V DC
24 V DC

6ED1 055-1MD00-0BA1
LOGO! AM2 RTD

Product type designation

Yes
Yes

Yes; 10,8 ... 28.8 V DC

Yes; 10.8 ... 28.8 V DC

Siemens ST 70 2011

2/15

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular expansion modules

Technical specifications (continued)

Analog inputs
Number of analog inputs
Input ranges
Voltage
Current
Resistance thermometer

6ED1 055-1MA00-0BA0

6ED1 055-1MD00-0BA1

2; 2 or 3 wire connection

Yes
Yes
Yes; for PT100/PT1000 sensors

Input ranges (rated values), voltages

0 to +10 V

Yes

Input ranges (rated values), currents

0 to 20 mA

Yes

EMC
Emission of radio interference acc. to
EN 55 011
Emission of radio interference acc.
to EN 55 011 (limit value class B)

Yes

Yes; Radio interference suppression according to

EN55011, limit value class B

Environmental requirements
Operating temperature
Min.
Max.

0 C
55 C

0 C
55 C

Degree of protection
IP20

Yes

Yes

Standards, approvals, certificates

CSA approval

Yes

Yes; C22.2 Number 142

Developed according to IEC1131

Yes

Yes; EN 61131-2 (IEC 1131-2)

FM approval

Yes

Yes; FM-Standards No. 3611, 3600,

3810 Class I, Division 2, Group A, B, C, D

According to VDE 0631

Yes

Marine approval

Yes

Yes; ABS, BV, DNV, GL, LRS, Class NK

UL approval

Yes

Yes; UL 508

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

on 35 mm DIN rail, 2 spacing units wide

36 mm
90 mm
55 mm

36 mm
90 mm
53 mm

6ED1 055-1MM00-0BA1

6ED1 055-1MM00-0BA1
Supply voltages
Rated value
12 V DC
24 V DC
Analog outputs
Number of analog outputs
Output ranges, voltage
0 to 10 V
EMC
Emission of radio interference acc.
to EN 55 011
Emission of radio interference acc.
to EN 55 011 (limit value class B)
Environmental requirements
Operating temperature
Min.
Max.

2/16

Siemens ST 70 2011

No
Yes
2
Yes

Yes; Radio interference

suppression according to
EN55011, limit value class B

0 C
55 C

Degree of protection
IP20

Yes

Standards, approvals, certificates

CSA approval

Yes

Developed according to IEC1131

Yes

FM approval

Yes

According to VDE 0631

Yes

Marine approval

Yes

UL approval

Yes

Dimensions and weight

Dimensions
Mounting
Width
Height
Depth

on 35 mm DIN rail, 2 spacing

units wide
36 mm
90 mm
55 mm

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! modular expansion modules

Ordering data

Order No.
6ED1 055-1CB00-0BA0

LOGO! DM8 24
Supply voltage 24 V DC,
4 digital inputs 24 V DC,
4 digital outputs 24 V DC, 0.3 A

Order No.
Accessories

LOGO! Manual

LOGO! DM16 24

6ED1 055-1CB10-0BA0

Supply voltage 24 V DC,

8 digital inputs 24 V DC,
8 digital outputs 24 V DC, 0.3 A
LOGO! DM8 12/24R

6ED1 055-1MB00-0BA1

Supply voltage 12/24 V DC,

4 digital inputs 12/24 V DC,
4 relay outputs 5 A
LOGO! DM8 24R

6ED1 055-1HB00-0BA0

German

6ED1 050-1AA00-0AE7

English

6ED1 050-1AA00-0BE7

French

6ED1 050-1AA00-0CE7

Spanish

6ED1 050-1AA00-0DE7

Italian

6ED1 050-1AA00-0EE7

Chinese

6ED1 050-1AA00-0KE7

LOGO! memory card

6ED1 056-1DA00-0BA0

for copying, with know-how

protection
LOGO!Soft Comfort V6.0

Supply voltage24 V AC/DC,

4 digital inputs 24 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 24R

6ED1 055-1NB10-0BA0

Supply voltage 24 V DC,

8 digital inputs 24 V DC,
8 relay outputs 5 A

LOGO!Soft Comfort V6.0

upgrade

LOGO! DM8 230R

6ED1 055-1FB00-0BA1

6ED1 058-0BA02-0YA0

6ED1 058-0CA02-0YE0

Upgrade from V1.0 to V6.0

LOGO! PC cable

Supply voltage 115/230 V AC/DC,

4 digital inputs 115/230 V AC/DC,
4 relay outputs 5 A

For programming on the PC in

LAD/FBD; executes on Windows
98 SE and higher, Linux, MAC
OSX; on CD-ROM

6ED1 057-1AA00-0BA0

For program transfer between

LOGO! and PC

LOGO! DM16 230R

6ED1 055-1FB10-0BA0

Supply voltage 115/230 V AC/DC,

8 digital inputs 115/230 V AC/DC,
8 relay outputs 5 A
LOGO! AM2

6ED1 055-1MA00-0BA0

Supply voltage 12/24 V DC, two

analog inputs 0 ... 10 V or
0 ... 20 mA, 10-bit resolution
LOGO! AM2 PT 100

6ED1 055-1MD00-0BA1

6ED1 055-1MM00-0BA1

Supply voltage 12/24 V DC,

2 analog inputs Pt100, temperature range -50 C ... 200 C
LOGO! AM2 AQ
Supply voltage 24 V DC, 2 analog
outputs 0 to 10 V, 0/4 to 20 mA
I: Subject to export regulations AL: N and ECCN: EAR99H
J: Subject to export regulations AL: N and ECCN: EAR99S

Siemens ST 70 2011

2/17

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular expansion modules

Overview
Expansion modules for connection to LOGO! Modular
With digital inputs and outputs, analog inputs, or analog
outputs

Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific information was added.

SIPLUS LOGO! DM8 24

Order No.

6AG1 055-1CB00-2BY0

Order No. based on

6ED1 055-1CB00-0BA0

6AG1 055-1CB00-2XB0

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

-25 ... +70 C

SIPLUS LOGO! DM8 24

Order No.

6AG1 055-1PB00-2BY0

Order No. based on

6ED1 055-1CB00-0BA0

6AG1 055-1PB00-2XB0

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

-25 ... +70 C

Technical data

The technical data of the standard product applies except for the ambient conditions.

SIPLUS LOGO! DM8 24 R

Order Nor

6AG1 055-1HB00-2BY0

Order No. based on

6ED1 055-1HB00-0BA0

6AG1 055-1HB00-2XB0

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

-25 ... +70 C

SIPLUS LOGO! DM8 12/24R

Order No.

6AG1 055-1MB00-2BY1

Order No. based on

6ED1 055-1MB00-0BA1

6AG1 055-1MB00-2XB1

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

2/18

Siemens ST 70 2011

-25 ... +70 C

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular expansion modules

Overview (continued)
SIPLUS LOGO! DM8 230R
Order No.

6AG1 055-1FB00-2BY1

Order No. based on

6ED1 055-1FB00-0BA1

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

6AG1 055-1FB00-2XB1
-25 ... +70 C

SIPLUS LOGO! AM2

Order number

6AG1 055-1MA00-2BY0

Order No. based on

6ED1 055-1MA00-0BA0

6AG1055-1MA00-2XB0

Ambient temperature range

-40 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

-25 ... +70 C

Technical data

The technical data of the standard product applies except for the ambient conditions.

SIPLUS LOGO! AM2 AQ

SIPLUS LOGO! DM16 24R

Order number

6AG1 055-1MM00-2BY1

6AG1 055-1NB10-2BA0

Order No. based on

6ED1 055-1MM00-0BA1

6ED1 055-1CB10-0BA0

Ambient temperature range

-40 ... +70 C

-25 ... +70 C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies except for the ambient conditions.

Ambient conditions

Ambient conditions

Relative humidity

5 ... 100 %
Condensation permissible

Biologically active substances

Conformity with EN 60721-3-3,

Class 3B2 mold and fungal
spores (except fauna)

Chemically active substances

Conformity with EN 60721-3-3,

Class 3C4 incl. salt mist and ISA
S71.04 severity level G1; G2; G3;
GX 1 )2)

Mechanically active substances

Conformity with EN 60721-3-3,

Class 3S4 including conductive
sand, dust 2)

Air pressure (depending on the

highest positive temperature range
specified)

1)

2)

1080 ... 795 hPa

(-1000 ... +2000 m)
see ambient temperature range
795 ... 658 hPa
(+2000 ... +3500 m)
derating 10 K
658 ... 540 hPa
(+3500 ... +5000 m)
derating 20 K

ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm;
H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm;
NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d): SO2 < 17.8 ppm; H2S < 49.7 ppm;
Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm;
O3 < 1.0 ppm; NOX < 10.4 ppm
The supplied plug covers must remain in place over the unused
interface when operated in atmospheres containing corrosive gases!

The technical documentation on SIPLUS can be found here:

www.siemens.com/siplus-extreme

Siemens ST 70 2011

2/19

 Siemens AG 2011

LOGO! logic module

LOGO! modular
SIPLUS LOGO! modular expansion modules

Ordering data

Order No.

Order No.

SIPLUS LOGO! DM8 24

SIPLUS LOGO! AM2

(extended temperature range and

medial exposure)

(extended temperature range and

medial exposure)

24 V DC power supply,
four 24 V DC digital inputs,
four 24 V DC digital outputs, 0.3 A

12/24 V DC power supply,

two analog inputs 0 ... 10 V or
0 ... 20 mA, 10 bit resolution

Temperature range -25 ... +70 C H 6AG1 055-1CB00-2XB0

Temperature range -25 ... +70 C H 6AG1 055-1MA00-2XB0

Temperature range -40 ... +70 C L 6AG1 055-1CB00-2BY0

Temperature range -40 ... +70 C L 6AG1 055-1MA00-2BY0

SIPLUS LOGO! DM8 12/24

SIPLUS LOGO! AM2 AQ

(extended temperature range and

medial exposure)

(extended temperature range and

medial exposure)

12/24 V DC power supply,

four 12/24 V DC digital inputs,
four 24 V DC digital outputs, 0.3 A

24 V DC power supply, 2x analog

inputs 0 ... 10 V, 0/4 ... 20 mA,
10-bit resolution

Temperature range -25 ... +70 C L 6AG1 055-1PB00-2XB0

Temperature range -40 ... +70 C L 6AG1 055-1MM00-2BY1

Temperature range -40 ... +70 C L 6AG1 055-1PB00-2BY0

SIPLUS LOGO! DM16 24R

SIPLUS LOGO! DM8 24R

(extended temperature range and

medial exposure)

(extended temperature range and

medial exposure)

Supply voltage 24 V DC,

8x digital outputs 24 V DC,
8x relay outputs 5 A

24 V AC/DC power supply,

four 24 V AC/DC digital inputs,
four 5 A relay outputs

Temperature range -25 ... +70 C L 6AG1 055-1NB10-2BA0

Temperature range -25 ... +70 C A 6AG1 055-1HB00-2XB0

Accessories

Temperature range -40 ... +70 C L

SIPLUS Upmiter upstream

device

6AG1 055-1HB00-2BY0

SIPLUS LOGO! DM8 12/24R

(extended temperature range and
medial exposure)
12/24 V DC power supply,
four 12/24 V DC digital inputs,
four 5 A relay outputs

6AG1 053-1AA00-2AA0

for reliable operation at the

battery of combustion engines
Additional accessories

See LOGO! modular pure

versions, page 2/17

Temperature range -25 ... +70 C H 6AG1 055-1MB00-2XB1

Temperature range -40 ... +70 C L 6AG1 055-1MB00-2BY1
SIPLUS LOGO! DM8 230R
(extended temperature range and
medial exposure)
115/230 V AC/DC power supply,
four 115/230 V AC/DC digital
inputs, four 5 A relay outputs
Temperature range -25 ... +70 C A 6AG1 055-1FB00-2XB1
Temperature range -40 ... +70 C L 6AG1 055-1FB00-2BY1
A: Subject to export regulations AL: 9I999 and ECCN: 4A994X
H: Subject to export regulations AL: 9I999 and ECCN: EAR99H
L: Subject to export regulations AL: 9I999 and ECCN: N

2/20

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO! modular
LOGO! CM EIB/KNX communication module

Overview

Technical specifications
CM EIB/KNX

Expansion module for LOGO! basic versions

For communication between the LOGO! master and external
EIB components through EIB

Supply voltage

24 V AC/DC

Inputs, max.

16 DI/12 DO/8 AI/2 AO

Outputs, max.

16 digital

Continuous current

25 mA

Short-circuit protection

External fuse protection is

required

Integrated time switches/power

reserve

Ambient temperature

0 +55C

RI specification

To EN 55 011 (limit value class B)

Degree of protection

IP20

Certification

to VDE 0631, IEC61131-2, cULus,

FM

Mounting

On DIN rail 35 mm,

2 module widths wide

Dimensions (W x H x D) in mm

36 (2 MW) 90 55

Ordering data
LOGO! CM EIB KNX communi- I
cation module

Order No.
6BK1 700-0BA00-0AA1

for connection to EIB, supply

voltage 24 V DC
Accessories
LOGO! manual
German

6ED1 050-1AA00-0AE7

English

6ED1 050-1AA00-0BE7

French

6ED1 050-1AA00-0CE7

Spanish

6ED1 050-1AA00-0DE7

Italian

6ED1 050-1AA00-0EE7

Chinese

6ED1 050-1AA00-0KE7

I: Subject to export regulations AL: N and ECCN: EAR99H

Siemens ST 70 2011

2/21

 Siemens AG 2011

LOGO! logic module

LOGO! modular
AS-Interface connection for LOGO!

Overview

Technical specifications

Each LOGO! can now be connected to the AS-Interface

system

Supply oltage

24 V DC

nputs outputs

4/4
(virtual inputs / outputs)
AS-Interface according to specification

us connection
Ambient temperature

0 ... +55 C

egree of protection

IP20

ounting

Onto standard mounting rail

imensions

36 x 90 x 58 mm

ndications of the E s
E
Green
Red
Flashes red/yellow

Status
No data traffic
Zero address

Ordering data
An intelligent slave can be integrated into the AS-Interface
system with the AS-Interface for LOGO!. The modular interface
allows the different basic units to be integrated into the system
depending on the required functionality. In addition, the functionality can be quickly and simply adapted to changed requirements by replacing the basic unit.
The interface provides four inputs and four outputs for the
system. These I/Os, however, are not implemented in hardware,
but are only virtually available via the interface.

2/22

Siemens ST 70 2011

AS-Interface connection for

LOGO!

Order No.
F

3RK1 400-0CE10-0AA2

F: Subject to export regulations AL: N and ECCN: EAR99

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Overview
performance range are made possible by: wide-range input,
radio interference class B, the extensive temperature range as
well as numerous certificates.

The LOGO!Power miniature power supply units from Siemens

are the perfect solution for many applications their flat, stepshaped profile makes them perfectly suited for distribution
boards, for example. Even more fields of application in the lower

Main product features:

2 performance classes with 5 V, 12 V, and 15 V each
3 performance classes with 24 V
Flat LOGO! design with an installation depth of only 55 mm
High efficiency across the entire load range
Low no-load loss
Wide-range input from 85 V to 264 V AC
Operation on DC voltage of 110 V to 300 V
Constant current for connection of loads with high inrush
current
Adjustable output voltage
Green LED for "Output voltage OK"
Temperature range from -20 C to +70 C
Numerous certificates, such as CE, cULus, FM, GL and ATEX

Technical specifications LOGO!Power 5 V

Power supply, type
Order No.

5 V/3 A
6EP1 311-1SH03

5 V/6.3 A
6EP1 311-1SH13

Input

1-phase AC or DC

1-phase AC or DC

Rated voltage Uin rated

100-240 V AC
Wide-range input

100-240 V AC
Wide-range input

Voltage range

85 ... 264 V AC
110 300 V DC

85 ... 264 V AC
110 300 V DC

Overvoltage strength

2.3 x Uin rated, 1.3 ms

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

> 40 ms at Uin = 187 V

Rated line frequency, rated line frequency range

50/60 Hz; 47 ... 63 Hz

50/60 Hz; 47 ... 63 Hz

Rated current Iin rated

0.36-0.22 A

0.71-0.37 A

Switch-on current limitation (+25 C)

< 26 A

< 50 A

I2 t

< 0.8 A2s

< 3 A2s

Built-in incoming fuse

Internal

Internal

Recommended miniature circuit breaker

(IEC 898) in the mains power input

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

Output

Controlled, isolated DC voltage

Controlled, isolated DC voltage

Rated voltage Uout rated

5 V DC

5 V DC

Total tolerance, static

Static line compensation
Static load compensation

3 %
Approx. 0.2%
Approx. 1.5%

3 %
Approx. 0.1%
Approx. 2%

Residual ripple

< 100 mVpp (typ. 10 mVpp)

< 100 mVpp (typ. 15 mVpp)

Spikes (bandwidth approx. 20 MHz)

< 100 mVpp (typ. 20 mVpp)

< 100 mVpp (typ. 70 mVpp)

Adjustment range

4.6 ... 5.4 V

4.6 ... 5.4 V

Status indicator

5 V OK = green LED

5 V OK = green LED

On/Off behavior

No overshoot of Uout (soft start)

No overshoot of Uout (soft start)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

< 0.5 s/typ. 10 ms

Rated current Iout rated

3A

6.3 A

Current range up to +55 C

Derating

0 ... 3 A
0 ... 2.1 A (up to +70 C)

0 ... 6.3 A
0 ... 4.4 A (up to +70 C)

Parallel switching for enhanced performance

Yes, 2 units

Yes, 2 units

Siemens ST 70 2011

2/23

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 5 V (continued)

Power supply, type

Order No.

5 V/3 A
6EP1 311-1SH03

5 V/6.3 A
6EP1 311-1SH13

Efficiency at Uout rated, Iout rated

Approx. 77%

Approx. 83%

Power loss at Uout rated, Iout rated

Approx. 4 W

Approx. 6 W

Dyn. line compensation

(Uin rated 15%)

< 0.2 % Uout

< 0.2 % Uout

Dynamic load compensation

(Iout: 10/90/10 %)

Typ. 3% Uout

Typ. 3% Uout

Typ. 2 ms
Typ. 2 ms

Typ. 2 ms
Typ. 2 ms

Current limitation

Typ. 3.8 A

Typ. 8.2 A

Short-circuit protection

Constant current characteristic

Constant current characteristic

Sustained short-circuit current rms value

<5A

< 10 A

Primary/secondary isolation

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Efficiency

Closed-loop control

Load step settling time

10 to 90%
90 to 10%
Protection and monitoring

Safety

Safety class

Class II (without protective conductor)

Class II (without protective conductor)

Safety test

Yes; CB scheme

Yes; CB scheme

CE marking

Yes

Yes

UL/cUL (CSA) approval

cULus-listed (UL 508, CSA C22.2 No. 107.1),

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

cULus-listed (UL 508, CSA C22.2 No. 107.1),

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

Protection against explosion

ATEX (available soon)

ATEX (available soon)

FM approval

Class I Div. 2, Group A, B, C, D T4

Class I Div. 2, Group A, B, C, D T4

Marine approval

GL (available soon)

GL (available soon)

Degree of protection (EN 60529)

IP20

IP20

EMC
Emitted interference

EN 55022 Class B

EN 55022 Class B

Supply harmonics limitation

Not applicable

Not applicable

Noise immunity

EN 61000-6-2

EN 61000-6-2

Ambient temperature range

-20 ... +70 C with natural convection

-20 ... +70 C with natural convection

Transport and storage temperature range

-40 ... +85 C

-40 ... +85 C

Humidity class

Climate class 3K3 according to EN 60721,

no condensation

Climate class 3K3 according to EN 60721,

no condensation

Solid/finely-stranded per screw-type terminal

for 0.5 mm ... 2.5 mm2
2 screw terminals each for 0.5 ... 2.5 mm2

Solid/finely-stranded per screw-type terminal

for 0.5 mm ... 2.5 mm2
2 screw terminals each for 0.5 ... 2.5 mm2

Operating data

Mechanics
Supply-input connections L1, N
Connections
Output +
Output Dimensions (W x H x D) in mm

54 x 90 x 55

72 x 90 x 55

Weight, approx.

0.17 kg

0.25 kg

Mounting

Can be snapped onto standard mounting rail

EN 60715 35x7.5/15

Can be snapped onto standard mounting rail

EN 60715 35x7.5/15

2/24

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 12 V

Power supply, type
Order No.

12 V/1.9 A
6EP1 321-1SH03

12 V/4.5 A
6EP1 322-1SH03

Input

1-phase AC or DC

1-phase AC or DC

Rated voltage value Uin rated

100-240 V AC
Wide-range input

100-240 V AC
Wide-range input

Voltage range

85 ... 264 V AC
110 300 V DC

85 ... 264 V AC
110 300 V DC

Overvoltage resistance

2.3 x Uin rated, 1.3 ms

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

> 40 ms at Uin = 187 V

Rated line frequency, rated line-frequency range

50/60 Hz; 47 ... 63 Hz

50/60 Hz; 47 ... 63 Hz

Rated current value Iin rated

0.53-0.3 A

1.13-0.61 A

Switch-on current limitation (+25 C)

< 26 A

< 54 A

I2 t

< 0.8 A2s

< 3 A2s

Built-in incoming fuse

Internal

Internal

Recommended miniature circuit breaker (IEC 898)

in the mains power input

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

Output

Controlled, isolated DC voltage

Controlled, isolated DC voltage

Rated voltage value Uout rated

12 V DC

12 V DC

Total tolerance, static

Static mains compensation
Static load smoothing

3 %
Approx. 0.2 %
Approx. 1.5 %

3 %
Approx. 0.1 %
Approx. 1.5 %

Residual ripple

< 200 mVpp (typ. 10 mVpp)

< 200 mVpp (typ. 10 mVpp)

Spikes (bandwidth approx. 20 MHz)

< 300 mVpp (typ. 20 mVpp)

< 300 mVpp (typ. 70 mVpp)

Adjustment range

10.5 ... 16.1 V

10.5 ... 16.1 V

Status indicator

Green LED for 12 V OK

Green LED for 12 V OK

On/Off behavior

No overshoot of Uout (soft start)

No overshoot of Uout (soft start)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

< 0.5 s/typ. 15 ms

Rated current value Iout rated

1.9 A

4.5 A

Current range up to +55 C

Derating

0 ... 1.9 A
0 ... 1.3 A (up to +70 C)

0 ... 4.5 A
0 ... 3.1 A (up to +70 C)

Parallel switching for enhanced performance

Yes, 2 units

Yes, 2 units

Efficiency at Uout rated, Iout rated

Typ. 80 %

Typ. 85 %

Heat loss at Uout rated, Iout rated

Typ. 5 W

Typ. 10 W

Dyn. mains compensation

(Uin rated 15 %)

< 0.2 % Uout

< 0.2 % Uout

Dynamic load smoothing (Iout: 10/90/10%)

Typ. 3 % Uout

Typ. 4 % Uout

Load step settling time

10 to 90 %
90 to 10 %

Approx. 1 ms
Approx. 1 ms

Approx. 1 ms
Approx. 1 ms

Efficiency

Closed-loop control

Protection and monitoring

Current limitation

Typ. 2.8 A

Typ. 5.8 A

Short-circuit protection

Constant current characteristic

Constant current characteristic

Sustained short-circuit current rms value

<4A

<8A

Primary/secondary isolation

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Safety

Protection class

Class II (without protective conductor)

Class II (without protective conductor)

German Technical Inspectorate approval

Yes; CB scheme

Yes; CB scheme

CE mark

Yes

Yes

Siemens ST 70 2011

2/25

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 12 V (continued)

Power supply, type

Order No.

12 V/1.9 A
6EP1 321-1SH03

12 V/4.5 A
6EP1 322-1SH03

UL/cUL (CSA) approval

cULus-listed (UL 508, CSA C22.2 No. 107.1);

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

cULus-listed (UL 508, CSA C22.2 No. 107.1);

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

Explosion protection

ATEX (available soon)

ATEX (available soon)

FM approval

Class I Div. 2, Group A, B, C, D T4

Class I Div. 2, Group A, B, C, D T4

Marine approval

GL, ABS (available soon)

GL, ABS (available soon)

Degree of protection (EN 60529)

IP20

IP20

EMC
Emitted interference

EN 55022 Class B

EN 55022 Class B

Supply harmonics limitation

Not applicable

Not applicable

Noise immunity

EN 61000-6-2

EN 61000-6-2

Operating data
Ambient temperature range

-20 ... +70 C with natural convection

-20 ... +70 C with natural convection

Transport and storage temperature range

-40 ... +85 C

-40 ... +85 C

Humidity class

Climate class 3K3 according to EN 60721,

no condensation

Climate class 3K3 according to EN 60721,

no condensation

1 screw terminal each for 0.5 mm ... 2.5 mm2

single-core/finely stranded
2 screw terminals each for 0.5 ... 2.5 mm2

1 screw terminal each for 0.5 mm ... 2.5 mm2

single-core/finely stranded
2 screw terminals each for 0.5 ... 2.5 mm2

Mechanics
Supply-input connections L1, N
Connections
Output +
Output Dimensions (W x H x D) in mm

54 x 90 x 55

72 x 90 x 55

Weight, approx.

Approx. 0.17 kg

Approx. 0.25 kg

Installation

Snaps onto standard mounting rail EN 60715

35x7.5/15

Snaps onto standard mounting rail EN 60715

35x7.5/15

Power supply, type

Order No.

15 V/1.9 A
6EP1 351-1SH03

15 V/4 A
6EP1 352-1SH03

Input

1-phase AC or DC

1-phase AC or DC

Rated voltage value Uin rated

100-240 V AC
Wide-range input

100-240 V AC
Wide-range input

Voltage range

85 ... 264 V AC
110 300 V DC

85 ... 264 V AC
110 300 V DC

Overvoltage resistance

2.3 x Uin rated, 1.3 ms

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

> 40 ms at Uin = 187 V

Technical specifications LOGO!Power 15 V

Rated line frequency, rated line-frequency range

50/60 Hz; 47 ... 63 Hz

50/60 Hz; 47 ... 63 Hz

Rated current value Iin rated

0.63-0.33 A

1.24-0.68 A

Switch-on current limit (+25 C)

< 26 A

< 54 A

I2 t

< 0.8 A2s

< 3 A2s

Built-in incoming fuse

Internal

Internal

Recommended miniature circuit breaker (IEC 898)

in the mains power input

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

16 A or higher, Characteristic B or 10 A or
higher, Characteristic C

Output

Controlled, isolated DC voltage

Controlled, isolated DC voltage

Rated voltage Uout rated

15 V DC

15 V DC

Total tolerance, static

Static mains compensation
Static load smoothing

3 %
Approx. 0.1 %
Approx. 1.5 %

3 %
Approx. 0.1 %
Approx. 1.5 %

Residual ripple

< 200 mVpp (typ. 10 mVpp)

< 200 mVpp (typ. 10 mVpp)

2/26

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 15 V (continued)

Power supply, type
Order No.

15 V/1.9 A
6EP1 351-1SH03

15 V/4 A
6EP1 352-1SH03

Spikes (bandwidth approx. 20 MHz)

< 300 mVpp (typ. 30 mVpp)

< 300 mVpp (typ. 70 mVpp)

Adjustment range

10.5 ... 16.1 V

10.5 ... 16.1 V

Status indicator

Green LED for 15 V OK

Green LED for 15 V OK

On/Off behavior

No overshoot of Uout (soft start)

No overshoot of Uout (soft start)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

< 0.5 s/typ. 15 ms

Rated current value Iin rated

1.9 A

4A

Current range up to +55 C

Derating

0 ... 1.9 A
0 ... 1.3 A (up to +70 C)

0 ... 4 A
0 ... 2.8 A (up to +70 C)

Parallel switching for enhanced performance

Yes, 2 units

Yes, 2 units

Efficiency at Uout rated, Iout rated

Approx. 81 %

Approx. 85 %

Heat loss at Uout rated, Iout rated

Approx. 7 W

Approx. 11 W

Dyn. mains compensation

(Uin rated 15%)

< 0.2 % Uout

< 0,2 % Uout

Dynamic load smoothing

(Iout: 10/90/10%)

Typ. 2.8 % Uout

Typ. 3 % Uout

Typ. 1 ms
Typ. 1 ms

Typ. 1 ms
Typ. 1 ms

Efficiency

Closed-loop control

Load step settling time

10 to 90 %
90 to 10 %
Protection and monitoring
Current limitation

Typ. 2.7 A

Typ. 5.7 A

Short-circuit protection

Constant current characteristic

Constant current characteristic

Sustained short-circuit current rms value

<4A

<8A

Primary/secondary isolation

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Yes, safety extra low output voltage Uout

according to EN 60950 and EN 50178

Safety

Protection class

Class II (without protective conductor)

Class II (without protective conductor)

Safety test

Yes; CB scheme

Yes; CB scheme

CE mark

Yes

Yes

UL/cUL (CSA) approval

cULus-listed (UL 508, CSA C22.2 No. 107.1);

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

cULus-listed (UL 508, CSA C22.2 No. 107.1);

cURus-recognized (UL 60950, CSA C22.2
No. 60950)

Explosion protection

ATEX (available soon)

ATEX (available soon)

FM approval

Class I Div. 2, Group A, B, C, D T4

Class I Div. 2, Group A, B, C, D T4

Marine approval

GL (available soon)

GL (available soon)

Degree of protection (EN 60529)

IP20

IP20

Emitted interference

EN 55022 Class B

EN 55022 Class B

Supply harmonics limitation

Not applicable

Not applicable

Noise immunity

EN 61000-6-2

EN 61000-6-2

EMC

Operating data
Ambient temperature range

-20 ... +70 C with natural convection

-20 ... +70 C with natural convection

Transport and storage temperature range

-40 ... +85 C

-40 ... +85 C

Humidity class

Climate class 3K3 according to EN 60721,

no condensation

Climate class 3K3 according to EN 60721,

no condensation

Siemens ST 70 2011

2/27

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 15 V (continued)

Power supply, type

Order No.

15 V/1.9 A
6EP1 351-1SH03

15 V/4 A
6EP1 352-1SH03

1 screw terminal each for 0.5 mm ... 2.5 mm2

single-core/finely stranded
2 screw terminals each for 0.5 ... 2.5 mm2

1 screw terminal each for 0.5 mm ... 2.5 mm2

single-core/finely stranded
2 screw terminals each for 0.5 ... 2.5 mm2

Mechanics
Supply-input connections L1, N
Connections
Output +
Output Dimensions (W x H x D) in mm

54 x 90 x 55

72 x 90 x 55

Weight, approx.

Approx. 0.17 kg

Approx. 0.25 kg

Installation

Snaps onto standard mounting rail EN 60715

35x7.5/15

Snaps onto standard mounting rail EN 60715

35x7.5/15

Technical specifications LOGO!Power 24 V/1.3 A

Power supply, type
Order No.

24 V/1.3 A
6EP1 331-1SH03

Power supply, type

Order No.

24 V/1.3 A
6EP1 331-1SH03

Input

1-phase AC or DC

Closed-loop control

Rated voltage Uin rated

100-240 V AC
Wide-range input

Dyn. mains compensation

(Uin rated 15%)

< 0,2 % Uout

Voltage range

85 ... 264 V AC
110 300 V DC

Dynamic load smoothing

(Iout: 50/100/50 %)

Typ. 1% Uout
(Iout: 10/90/10 %)

Overvoltage strength

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

Load step settling time

50 to 100%
100 to 50%

Typ. 1 ms (10 to 90%)

Typ. 1 ms (90 to 10%)

Rated line frequency, rated line-frequency

range

50/60 Hz; 47 ... 63 Hz

Rated current Iin rated

0.7-0.35 A

Switch-on current limitation (+25 C)

I2 t
Built-in incoming fuse

Internal

Recommended miniature circuit breaker

(IEC 898) in the mains power input

16 A or higher, Characteristic B or 10 A or higher,

Characteristic C

Protection and monitoring

Output overvoltage protection

Yes, according to
EN 60950

< 30 A

Current limitation

Typ. 1.7 A

< 0.8 A2s

Short-circuit protection

Constant current characteristic

Sustained short-circuit current rms value

<4A

Overload/short-circuit indicator

Output

Controlled, isolated DC
voltage

Rated voltage Uout rated

24 V DC

Total tolerance
Static mains compensation
Static load smoothing

3 %
Approx. 0.1%
Approx. 1.5%

Residual ripple

< 200 mVpp (typ. 10 mVpp)

Spikes (bandwidth approx. 20 MHz)

Safety
Primary/secondary isolation

Yes, safety extra low output

voltage Uout according to
EN 60950-1 and EN 50178

Safety class

Class II (without protective

conductor)

Leakage current

Safety test

Yes; CB scheme

< 300 mVpp (typ. 20 mVpp)

CE marking

Yes

Adjustment range

22.2 ... 26.4 V

UL/cUL (CSA) approval

Status indicator

24 V OK = green LED

On/Off behavior

No overshoot of Uout (soft

start)

cULus-listed (UL 508, CSA

C22.2 No. 107.1), cURusrecognized (UL 60950,
CSA C22.2 No. 60950)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

Protection against explosion

ATEX EX II 3G Ex nA IIC T3

FM approval

Rated current Iout rated

1.3 A

Class I Div. 2, Group A, B,

C, D T4

Marine approval

GL, ABS

0 ... 1.3 A (up to +55C)

0 ... 0.9 A (up to +70C)

Degree of protection (EN 60529)

IP20

Yes, 2 units

Emitted interference

EN 55022 Class B

Supply harmonics limitation

Not applicable

Noise immunity

EN 61000-6-2

Current range
Current range up to +60 C
Derating
Parallel switching for enhanced performance
Efficiency
Efficiency at Uout rated, Iout rated

Approx. 83%

Power loss at Uout rated, Iout rated

Approx. 6.3 W

2/28

Siemens ST 70 2011

EMC

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 24 V/1.3 A (continued)

Power supply, type
Order No.

24 V/1.3 A
6EP1 331-1SH03

Operating data
Ambient temperature range

-20 ... +70 C with natural

convection

Transport and storage temperature range

-40 ... +85 C

Humidity class

Climate class 3K3

according to EN 60721,
no condensation

Power supply, type

Order No.

24 V/1.3 A
6EP1 331-1SH03

Dimensions (W x H x D) in mm

54 x 90 x 55

Weight, approx.

Approx. 0.17 kg

Mounting

Can be snapped onto

standard mounting rail
EN 60715 35x7.5/15

Accessories

24 V/2.5 A
6EP1 332-1SH43

Mechanics
Connections
Supply input L, N, PE
DC input: L+1, M1, PE
Output +
Output -

Solid/finely-stranded per
screw-type terminal (L, N)
for 0.5 mm ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2

Technical specifications LOGO!Power 24 V/2.5 A

Power supply, type
Order No

24 V/2.5 A
6EP1 332-1SH43

Power supply, type

Order No

Input

1-phase AC or DC

Efficiency

Rated voltage Uin rated

100-240 V AC
Wide-range input

Efficiency at Uout rated, Iout rated

Approx. 88%

Power loss at Uout rated, Iout rated

Approx. 8 W

Voltage range

85 ... 264 V AC
110 300 V DC

Closed-loop control

Overvoltage strength

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

Rated line frequency, rated line-frequency

range

50/60 Hz; 47 ... 63 Hz

Rated current Iin rated

1.22-0.66 A

Switch-on current limitation (+25 C)

< 46 A

I2 t

< 3 A 2s

Built-in incoming fuse

Internal

Recommended miniature circuit breaker

(IEC 898) in the mains power input

16 A or higher, Characteristic B or 10 A or higher,

Characteristic C

Output

Dyn. mains compensation

(Uin rated 15%)

< 0,2 % Uout

Dynamic load smoothing

(Iout: 50/100/50 %)

Typ. 2% Uout
(Iout: 10/90/10 %)

Load step settling time

50 to 100%
100 to 50%

Typ. 1 ms (10 to 90%)

Typ. 1 ms (90 to 10%)

Protection and monitoring

Output overvoltage protection

Yes, according to EN
60950

Current limitation

Typ. 3.3 A

Short-circuit protection

Controlled, isolated DC
voltage

Constant current characteristic

Sustained short-circuit current rms value

Approx. 3.5 A

Rated voltage Uout rated

24 V DC

Safety

Total tolerance
Static mains compensation
Static load smoothing

3 %
Approx. 0.1%
Approx. 1.5%

Primary/secondary isolation

Yes, safety extra low output

voltage Uout according to
EN 60950-1 and EN 50178

Residual ripple

< 200 mVpp (typ. 10 mVpp)

Safety class

Class II (without protective

conductor)

Spikes (bandwidth approx. 20 MHz)

< 300 mVpp (typ. 50 mVpp)

Leakage current

Adjustment range

22.2 ... 26.4 V

Safety test

Yes; CB scheme

Status indicator

24 V OK = green LED

CE marking

Yes

On/Off behavior

No overshoot of Uout
(soft start)

UL/cUL (CSA) approval

Startup delay /
voltage rise

< 0.5 s/typ. 10 ms

cULus-listed (UL 508, CSA

C22.2 No. 107.1), cURusrecognized (UL 60950,
CSA C22.2 No. 60950)

Rated current Iout rated

2.5 A

Protection against explosion

ATEX EX II 3G Ex nA IIC T3

FM approval
0 ... 2.5 A (up to +55C)
0 ... 1.75 A (up to +70C)

Class I Div. 2, Group A, B,

C, D T4

Marine approval

GL, ABS

Yes, 2 units

Degree of protection (EN 60529)

IP20

Current range
Current range up to +60 C
Derating
Parallel switching for enhanced
performance

Siemens ST 70 2011

2/29

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 24 V/2.5 A (continued)

Power supply, type

Order No

24 V/2.5 A
6EP1 332-1SH43

EMC

Power supply, type

Order No

24 V/2.5 A
6EP1 332-1SH43

Mechanics

Emitted interference

EN 55022 Class B

Supply harmonics limitation

Not applicable

Noise immunity

EN 61000-6-2

Connections
Supply input L, N, PE
DC input: L+1, M1, PE
Output +

Operating data

Solid/finely-stranded per
screw-type terminal (L, N)
for 0.5 mm ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2

Ambient temperature range

-20 ... +55 C with natural

convection

Output -

Transport and storage temperature range

-40 ... +70 C

Dimensions (W x H x D) in mm

72 x 90 x 55

Humidity class

Climate class 3K3

according to EN 60721,
no condensation

Weight, approx.

Approx. 0.25 kg

Mounting

Can be snapped onto

standard mounting rail
EN 60715 35x7.5/15

Accessories

Technical specifications LOGO!Power 24 V/4 A

Power supply, type
Order No.

24 V/4 A
6EP1 332-1SH52

Power supply, type

Order No.

24 V/4 A
6EP1 332-1SH52

Input

1-phase AC or DC

Rated current Iout rated

4A

Rated voltage Uin rated

100-240 V AC
Wide-range input

Voltage range

85 ... 264 V AC
110 300 V DC

Current range
Current range up to +60 C
Derating

0 ... 4 A (up to +55C)

0 ... 2.8 A (up to +70C)

Overvoltage strength

2.3 x Uin rated, 1.3 ms

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

Rated line frequency, rated line-frequency

range

50/60 Hz; 47 ... 63 Hz

Parallel switching for enhanced performance

Yes, 2 units

Efficiency
Efficiency at Uout rated, Iout rated

Approx. 89%

Power loss at Uout rated, Iout rated

Approx. 12 W

Rated current Iin rated

1.95 to 0.97 A

Closed-loop control

Switch-on current limitation (+25 C)

< 30 A

Dyn. mains compensation

(Uin rated 15%)

< 0,2 % Uout

2t

< 2.5

A 2s

Built-in incoming fuse

Internal

Dynamic load smoothing

(Iout: 50/100/50 %)

Typ. 1.5% Uout

(Iout: 10/90/10 %)

Recommended miniature circuit breaker

(IEC 898) in the mains power input

16 A or higher, Characteristic B or 10 A or higher,

Characteristic C

Load step settling time

50 to 100%
100 to 50%

Typ. 1 ms (10 to 90%)

Typ. 1 ms (90 to 10%)

Output

Controlled, isolated DC
voltage

Protection and monitoring

Rated voltage Uout rated

24 V DC

Output overvoltage protection

Yes, according to
EN 60950

Total tolerance
Static mains compensation
Static load smoothing

3 %
Approx. 0.1%
Approx. 1.5%

Current limitation

Typ. 5.2 A

Short-circuit protection

Constant current characteristic

Sustained short-circuit current rms value

< 10 A

Overload/short-circuit indicator

Residual ripple

< 200 mVpp (typ. 30 mVpp)

Spikes (bandwidth approx. 20 MHz)

< 300 mVpp (typ. 60 mVpp)

Adjustment range

22.2 ... 26.4 V

Status indicator

24 V OK = green LED

On/Off behavior

No overshoot of Uout
(soft start)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

2/30

Siemens ST 70 2011

Safety
Primary/secondary isolation

Yes, safety extra low output

voltage Uout according to
EN 60950-1 and EN 50178

Safety class

Class II (without protective

conductor)

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Technical specifications LOGO!Power 24 V/4 A (continued)

Power supply, type
Order No.

24 V/4 A
6EP1 332-1SH52

Power supply, type

Order No.

Leakage current

Operating data

Safety test

Yes; CB scheme

Ambient temperature range

CE marking

Yes

-20 ... +70 C with natural

convection

UL/cUL (CSA) approval

cULus-listed (UL 508,

CSA C22.2 No. 107.1),
cURus-recognized
(UL 60950, CSA C22.2
No. 60950)

Transport and storage temperature range

-40 ... +85 C

Humidity class

Climate class 3K3

according to EN 60721,
no condensation

Protection against explosion

ATEX EX II 3G Ex nA IIC T3

FM approval

Class I Div. 2, Group A, B,

C, D T4

Marine approval

GL, ABS

Degree of protection (EN 60529)

IP20

Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Mechanics
Connections
Supply input L, N, PE
DC input: L+1, M1, PE
Output +
Output -

EMC

24 V/4 A
6EP1 332-1SH52

Solid/finely-stranded per
screw-type terminal (L, N)
for 0.5 mm ... 2.5 mm2
2 screw terminals each for
0.5 ... 2.5 mm2
2 screw terminals each for
0.5 ... 2.5 mm2

Dimensions (W x H x D) in mm

90 x 90 x 55

Weight, approx.

Approx. 0.34 kg

Mounting

Can be snapped onto

standard mounting rail
EN 60715 35x7.5/15

Accessories

Siemens ST 70 2011

2/31

 Siemens AG 2011

LOGO! logic module

LOGO!Power
LOGO!Power

Ordering data

Order No.

Order No.

LOGO!Power 5 V

LOGO!Power 24 V/1.3 A

Stabilized power supply;

Output: 5 V DC/3 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

Stabilized power supply;

Output: 24 V DC/1.3 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

Stabilized power supply;

Output: 5 V DC/6.3 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 311-1SH03

LOGO!Power 24 V/2.5 A
6EP1 311-1SH13

LOGO!Power 12 V

6EP1 321-1SH03

Stabilized power supply;

Output: 12 V DC/4.5 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 322-1SH03

LOGO!Power 15 V
Stabilized power supply;
Output: 15 V DC/1.9 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 351-1SH03

Stabilized power supply;

Output: 15 V DC/4 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 352-1SH03

More information
In addition to various power supply product lines, the perfectly
coordinated complete SITOP range offers a unique range of
add-on modules with which the 24 V power supply can be
additionally protected against interference on the primary and
secondary side right up to all-round protection:
Redundancy module for setting up a redundant power supply
Uninterruptible 24 V power supplies with batteries or maintenance-free capacitors for continued operation in the event of
a power failure
Selectivity modules for electronic protection of 24 V branches
from overload and short-circuit
You can find more information in Catalog KT 10.1 and in the
Internet at
www.siemens.com/sitop

Siemens ST 70 2011

Stabilized power supply;

Output: 24 V DC/2.5 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 332-1SH43

LOGO!Power 24 V/4 A

Stabilized power supply;

Output: 12 V DC/1.9 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

2/32

6EP1 331-1SH03

Stabilized power supply;

Output: 24 V DC/4 A
Input: 110 300 V AC;
extended operating temperature
range: up to +70C

6EP1 332-1SH52

 Siemens AG 2011

LOGO! logic module

LOGO!Power
SIPLUS LOGO!Power

Overview

Technical specifications

Note:

Power supply, type

24 V/1.3 A

SIPLUS extreme products are based on Siemens Industry

standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific information was added.

Order number

6EP1 331-1SH02

Input

1-phase AC

Rated voltage Uin rated

100 ... 240 V AC

Wide-range input

Voltage range

85 ... 264 V AC

Overvoltage strength

2.3 x Uin rated, 1.3 ms

SIPLUS LOGO!Power 1.3 A

Order number

6AG1 931-1SH02-2AA0

Mains buffering at Iout rated

> 40 ms at Uin = 187 V

Order No. based on

6EP1 331-1SH02

50/60 Hz; 47 ... 63 Hz

Ambient temperature range

-25 C to +70 C

Rated line frequency, rated line

frequency range

Conformal coating

Coating of the printed circuit

boards and the electronic components

Rated current Iin rated

0.7-0.35 A

Technical data

The technical data of the

standard product applies except
for the ambient conditions.

Ambient conditions
Relative humidity
Biologically active substances

Chemically active substances

Mechanically active substances

Air pressure (depending on the

highest positive temperature range
specified)

1)

2)

5 ... 100 %
Condensation permissible
Conformity with EN 60721-3-3,
Class 3B2 mold and fungal
spores (except fauna)
Conformity with EN 60721-3-3,
Class 3C4 incl. salt mist and ISA
S71.04 severity level G1; G2; G3;
GX 1) 2)
Conformity with EN 60721-3-3,
Class 3S4 including conductive
sand, dust 2)
1080 ... 795 hPa
(-1000 ... +2000 m)
see ambient temperature range
795 ... 658 hPa
(+2000 ... +3500 m)
derating 10 K
658 ... 540 hPa
(+3500 ... +5000 m)
derating 20 K

ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm;
H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm;
NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Threshold / limit value (max. 30 min/d): SO2 < 17.8 ppm;
H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm;
NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
The supplied plug covers must remain in place over the unused
interface when operated in atmospheres containing corrosive gases!

Switch-on current limitation (+25 C) < 35 A

I2t

< 0.8 A2s

Built-in incoming fuse

Internal

Recommended miniature circuit

breaker (IEC 898) in the mains
power input

16 A or higher, Characteristic B or
10 A or higher, Characteristic C

Output

Controlled, isolated DC voltage

Rated voltage Uout rated

24 V DC

Total tolerance
Static mains compensation
Static load smoothing

3 %
Approx. 0.1%
Approx. 1.5%

Residual ripple

< 200 mVpp (typ. 10 mVpp)

Spikes (bandwidth approx. 20 MHz) < 300 mVpp (typ. 20 mVpp)

Setting range

22.2 ... 26.4 V

Status indicator

24 V OK = green LED

On/Off behavior

No overshoot of Uout (soft start)

Startup delay /
voltage rise

< 0.5 s/typ. 15 ms

Rated current Iout rated

1.3 A

Current range
Current range up to +60 C
Derating

0 ... 1.3 A (up to 55 C)

-

Parallel switching for enhanced

performance

Yes, 2 units

Efficiency
Efficiency at Uout rated, Iout rated

Approx. 82%

Heat loss at Uout rated, Iout rated

Approx. 7 W

Closed-loop control

The technical documentation on SIPLUS can be found here:

Dyn. mains compensation

(Uin rated 15%)

< 0,2 % Uout

www.siemens.com/siplus-extreme

Dynamic load smoothing

(Iout: 50/100/50 %)

Typ. 1.5 % Uout

(Iout: 10/90/10 %)

Load step settling time

50 to 100%
100 to 50%

Typ. 20 ms (10 to 90%)

Typ. 20 ms (90 to 10%)

Protection and monitoring

Output overvoltage protection

Yes, according to EN 60950

Current limitation

Typ. 2 A

Short-circuit protection

Constant current characteristic

Sustained short-circuit current rms

value

<4A

Overload/short-circuit indicator

Siemens ST 70 2011

2/33

 Siemens AG 2011

LOGO! logic module

LOGO!Power
SIPLUS LOGO!Power

Technical specifications (continued)

Power supply, type

24 V/1.3 A

Safety
Primary/secondary isolation

Ordering data
SIPLUS LOGO!Power 24 V 1.3 A L

Order No.
6AG1 931-1SH02-2AA0

(extended temperature range and

medial exposure)

Yes, safety extra low output

voltage Uout according to
EN 60950 and EN 50178

Input 100 ... 240 V AC

Output 24 V DC, 1.3 A

Protection class

Class II (without protective

conductor)

L: Subject to export regulations AL: 9I999 and ECCN: N

Leakage current

Safety test

Yes; CB scheme

CE marking

Yes

UL/cUL (CSA) approval

cULus-listed (UL 508, CSA C22.2

No. 107.1), File E197259; cURusrecognized (UL 60950, CSA
C22.2 No. 60950), File E151273

Explosion protection

ATEX EX II 3G Ex nA IIC T3

FM approval

Class I Div. 2, Group A, B, C, D T4

Marine approval

GL, ABS

Degree of protection (EN 60529)

IP20

EMC
Emitted interference

EN 55022 Class B

Supply harmonics limitation

Not applicable

Noise immunity

EN 61000-6-2

Operating data
Range of ambient temperature

-20 ... +55 C with natural

convection

Transport and storage temperature

range

-40 ... +70 C

Humidity class

Climate class 3K3 according to

EN 60721, no condensation

Mechanics
Connections
Supply input L, N, PE
DC input: L+1, M1, PE
Output +
Output -

One solid/finely-stranded screwtype terminal each (L, N) for

0.5 mm ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2
2 screw-type terminals for
0.5 ... 2.5 mm2

Dimensions (W x H x D) in mm

54 x 90 x 55

Weight, approx.

Approx. 0.17 kg

Installation

Can be snapped onto standard

mounting rail EN 60715 35x7.5/15

Accessories

2/34

Siemens ST 70 2011

 Siemens AG 2011

LOGO! logic module

LOGO!Contact
LOGO!Contact

Overview

Technical specifications
Dimensions and
weight
Weight
Weight, approx.

6ED1 057-4CA000AA0

6ED1 057-4EA000AA0

160 g

160 g

Ordering data

Order No.

LOGO!Contact
Switching module for direct
switching of resistive loads up to
20 A and motors up to 4 kW
Switching voltage 24 V

6ED1 057-4CA00-0AA0

Switching voltage 230 V

6ED1 057-4EA00-0AA0

Switching module for the direct switching of resistive loads

and motors

Siemens ST 70 2011

2/35

 Siemens AG 2011

LOGO! logic module

LOGO! software
LOGO! software

Overview

Ordering data
LOGO!Soft Comfort V6.0

Order No.
J

6ED1 058-0BA02-0YA0

6ED1 058-0CA02-0YE0

For programming on the PC in

LAD/FBD;
executes under Windows 98 SE
and higher, Linux, MAC OSX;
on CD-ROM
LOGO!Soft Comfort V6.0
upgrade
Upgrade from V1.0 to V6.0
J: Subject to export regulations AL: N and ECCN: EAR99S

The user-friendly software for creating control programs on a

PC
Creation of control programs in Function Block Diagram (FBD)
or Ladder Diagram (LAD)
Plus testing, simulation, online testing and archiving of control
programs
Professional documentation via numerous comment and print
functions
The connection between LOGO! and the PC is made using the
LOGO! PC cable (serial interface) or the LOGO! USB PC cable
(USB interface).
Minimum system requirements
Windows 98 SE, NT 4.0, ME, 2000, XP or Vista (not 64 bit)
PC Pentium.
90 MB free disk capacity.
64 MB RAM.
SVGA graphics card with minimum resolution 800x600
(256 colors).
Mac OS X
PowerMac G3, G4, G4 Cube, IMac, PowerBook G3, G4 or
iBook.
Linux (tested with Caldera OpenLinux 2.4)
Runs on all Linux distributions on which the Java 2 SDK
Version 1.3.1 runs.
Please refer to your relevant Linux distribution for the
necessary hardware requirements.

2/36

Siemens ST 70 2011

EN - For pricing and availability in your local country please visit one of the below links:
DE - Informationen zu Preisen und Verfgbarkeit in Ihrem Land erhalten Sie ber die unten aufgefhrten Links:
FR - Pour connatre les tarifs et la disponibilit dans votre pays, cliquez sur l'un des liens suivants:
6ED1 052-1FB00-0BA6

EN
This Datasheet is presented by
the manufacturer

Powered by TCPDF (www.tcpdf.org)

6ED1 052-1HB00-0BA6

DE
Dieses Datenblatt wird vom
Hersteller bereitgestellt

6ED1 052-1MD00-0BA6

FR
Cette fiche technique est
prsente par le fabricant