No.
Function
QUERY CLASS
1
Check firmware version
Check parameters
Query device network setting
Check status
Check position status
Check URL
Check position
Check geo fence status
Check moving status
SETTING CLASS
Set APN
Set automatic APN
Set server parameters
Set server parameters
4
5
Set GMT parameter
Restore to factory
Edit URL
GPRS switch
Reboot
GPRS blocking alarm
10
SOS setting
11
Center phone number setting
12
13
Heartbeat interval setting
Set GPS data sending interval
14
Set distance interval of GPS data sending
15
Set the angle upload
16
Set the upload for ACC status change
17
Set the GPS data sending batch
18
Set the delay of the defense
19
Set vibration sensor detecting time
20
21
22
Set the GPS controlled time by sensor
Disarm
Clear the backup data
23
Set the static data filtering
24
Set the petrol/electricity control
25
Set delay time of voice monitor
26
Set the fence alarm
27
Set the vibration alarm
28
Set the power cut-off alarm
29
Set the low battery alarm
30
Set the SOS alarm
31
Set the dialing times
31
Set the dialing times
32
Set the moving alarm
33
Set the overspeed alarm
34
Set sensitivity of SENSOR
35
Set the LED sleep mode
37
Set the instruction password
38
Revise the instruction password
40
Set the SMS forwarding
GT06D COMMANDS L
Command
Reply
VERSION#
e.g.
[VERSION]GT06B_10_8MM_B25_V11
_LA [BUILD]2013/01/04 17:45
PARAM#
e.g.
GPS report on time interval
IMEI:868120103643505;TIMER:20,2
0; SENDS:5; SOS:13730454825,,;
Center Number:;Sensorset:10,1,5,1;
Defense time:10;
TimeZone:E,8,0;
GPS report on distance
interval
IMEI:868120103643505;Distance:2
00; SENDS:5; SOS:13730454825,,;
Center Number:;Sensorset:10,1,5,1;
Defense time:10;
TimeZone:E,8,0;
GPRSSET#
e.g.GPRS:ON; APN:CMNET,,;
Server:1,hgt06.szdatasource.com,8
841,0;
URL:http://maps.google.com/maps?
q=;
STATUS#
e.g.Battery:3.41V,Battery too low!
Warning; GPRS:Link Up; GSM Signal
Level:Strong; GPS:Successful
positioning, SVS Used in fix:10(11),
GPS Signal
Level:32,31,32,31,28,29,29,36,32,3
3; ACC:OFF;
Defense:OFF
WHERE#
e.g.Current position!
Lat:N22.577156,Lon:E113.916748,C
ourse:0.00,Speed:0.00Km/h,Date
Time:2013-01-08 17:35:32
URL#
e.g.<01-08
17:36>http://maps.google.com/map
s?q=N22.577156,E113.916748
POSITION#
OR
123
e.g.
GPS located: <01-08
17:36>http://maps.google.com/map
s?q=N22.577156,E113.916748
GPS not located: GPS not fixed,
please wait for a while, and then try
again.
FENCE#
e.g.FenceType:Circle, ON,
Latitude:N22.577091,
Longitude:E113.916748,
radius:600m, in out:IN or OUT,
alarm type:1
FenceType:Circle, OFF,
Latitude:0.000000,
Longitude:0.000000,
radius:0m, in out:IN or OUT, alarm
type:1
MOVING#
e.g.Moving Switch:OFF;
Radius:300m; Alarm type:1
Moving Switch:ON; Lat:N22.577080;
Lon:E113.916794; Radius:300m;
Alarm type:1
APN, [apnname]#
OR
APN, [apnname],[user],[pwd]#
APN#
ASETAPN, [X]#
ASETAPN#
SERVER,mode,domainName/IP,po
rt,protocol
SERVER#
GMT,[A],[b],[C]#
GMT#
FACTORY#
EURL,network links#
EURL#
GPRSON,X#
GPRSON#
RESET#
GPRSALM,X#
GPRSALM#
SOS,A,[phone number 1][,phone
number 2][,phone number 3]#
SOS,D,[sequence number 1][,
sequence number 2][,sequence
number 3]#
SOS,[D],[phone number]#
SOS#
CENTER, A,[phone number]#
CENTER, D#
CENTER#
HBT,[T1],[T2]#
HBT#
TIMER,[T1],[T2]#
TIMER#
DISTANCE,[D]#
DISTANCE#
ANGLEREP,[X][,A][,B]#
ANGLEREP,OFF#
ANGLEREP#
ACCREP,[A]#
ACCREP#
BATCH,[A][,N]#
BATCH#
DEFENSE,[A]#
DEFENSE#
SENSOR,<A>,[,B][,C]#
SENDS,[A]#
SENDS#
DSRESET#
CLEAR#
SF,[A][,B]#
SF#
RELAY,[A]#
RELAY#
DELAY,<A>#
FENCE,[B],0,[D],[E],[F][,X][,M]#
FENCE,[B],1,[D],[E],[F],[G][,X]
[,M]#
FENCE#
SENALM,[A][,M]#
SENALM,OFF#
SENALM#
POWERALM, [A][,M][,T1][,T2]#
POWERALM, OFF#
POWERALM #
BATALM, [A][, M]#
BATALM,OFF#
BATALM#
SOSALM,[A],[M]#
SOSALM,OFF#
SOSALM#
CALL,N#
CALL#
MOVING,[A][,R][,M]#
MOVING,OFF#
MOVING#
SPEED,[A][,B][,C][,M]#
SPEED#
LEVEL,<A>#
LEDSLEEP,[A]#
LEDSLEEP#
PWDSW,[A]#
PWDSW,[password],[B]#
PASSWORD,[A],[B]#
RECOVER,[A]#
FW,[A],[B]#
6D COMMANDS LIST
Explanation
Close automatic APN and set by yourself.
Check the current APN parameters.
X=ON/OFF;
ON: open automatic APN;
OFF: close automatic APN.
Check automatic APN status
eg: SERVER,1,www.ydpat.com,8011,0#
SERVER,0,211.154.135.113,8011,0#
mode = 1 means set with domain name
mode = 0 means set with ip address
protocol = 0 means connect server with TCP protocol
protocol = 1 means connect server with UDP protocol
Check the current sever parameters
AE or W"E" means eastern time zone, "W" means western time
zonedefaultE
B012time zone default8
C0/15/30/45half time zonedefault0
Check the current time zone parameters
Restore to factory setting
set the network links for latitude and longitude, default:
http://maps.google.com/maps?q=
Check the current URL
X=0 or 1;"1" means GPRS ON, "0" means GPRS OFF, default:1
Check the current GPRS status
The device would reboot in 20S after receiving the command.
X=ON/OFF, default: OFF
Check the GPRS alarm status
Add SOS phone number.
Delete the phone number according to the sequence number.
Delete the matching SOS phone number.
Check the SOS phone number.
Add center phone number.
Delete center phone number.
Check the center phone number.
T1 ranges 1~300 (minutes), heartbeat package upload interval when
ACC ON; default is 3;
T2 ranges 1~300 (minutes), heartbeat package upload interval when
ACC OFF; default is 5;
Check the current parameters of T1 and T2.
T1 ranges 5~18000 or 0(seconds), upload interval when ACC ON, 0
means no upload, default is 10;
T2 ranges 5~18000 (minutes), upload interval when ACC OFF,
default is 10;
Check the current parameters of T1 and T2.
D ranges 50~10000 or 0(meters), distance interval, default is 300;
Check the current distance interval.
X=ON/OFF, defaultON
A=5180 degrees, diversion angle degree, default20 degrees
B=25 seconds, detecting time, default2 seconds,
Close the angle upload.
Check the angle upload status and its parameters.
A=ON/OFF, upload for ACC status change, default: ON
Check the upload for ACC status change.
A= A=ON/OFF, data sending batch function on or off, default:OFF
N=150, N means the number of messages in the batch, default
10
Check the number of messages in a batch.
A= 160 (minute), delay of the defense, default10 (minutes).
Check the parameters of the defense.
A=10-300 seconds,detecting time. Default: 10 seconds
B-10-300 seconds, alert delay. Deault:180 seconds
C=1-3000 minutes, vibration alert interval. Default: 30 minutes
SENSOR# Check the parameter of the status
A=0-300(minute), time duration for GPS to work once vibration
detected, 0 means GPS always on work, default: 5(minute)
Check the parameters of the time.
DSRESET# Cancel the current Arm status
A=ON/OFFstatic drift filtering switchdefault: ON
B=10-1000(m)maximal filtering distancedefault: 100(m)
Check the parameters.
A=0/10 means connection, 1 means cut offdefault: 0.
Check the status of the control.
A=05-18 seconds; Default: 10 seconds (Enter Listen-In after 10
senconds calling)
circle area;
B=ON/OFF, open or close fence alarm, defaultclose;
D=the latitude of the circle center;
E=the longitude of the circle center;
F=19999, the fence radius, unit100 meters;
X=IN/OUTIN: alarming when get in the fence, OUT: alarming when
get out the fence, blank means both alarming when get in or get out
the fence, default: blank.
M=0/1way of alarming, 0GPRS only, 1SMS+GPRS, default1
rectangle area
B=ON/OFF, open or close fence alarm, defaultclose;
D=the latitude of the position 1range-90 90(degree)
E=the longitude of the position 1range-180 180(degree)
F=the latitude of the position 2range-90 90(degree)
G=the longitude of the position 2range-180 180(degree)
the latitude supports "N/S" or "+/- " coming before it's value
the longitude supports "E/W" or "+/- " coming before it's value
Check the parameters of the fence.
A=ON/OFF, default: OFF;
M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, 2 :
GPRS+SMS+phone call, default:1
Close vibration alarm
Check the parameters of the alarm
A=ON/OFF, defaultON;
M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2 :
GPRS+SMS+phone call, default1
T1=260 (second), default5
T2=13600 (second), default300
Close the power alarm.
Check the parameters of the alarm.
A=ON/OFF, defaultON;
M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2 :
GPRS+SMS+phone call, default1
Close the low battery alarm.
Check the parameters of the alarm.
A=ON/OFF, defaultON;
M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, 2 :
GPRS+SMS+phone call, default1
Close the SOS alarm.
Check the parameters of the alarm.
N=13, default3, times to dial all numbers;
Check the parameters of the dialing.
A=ON/OFF, defaultOFF; R=1001000, moving radius, unit: meter,
default: 300
M=02, 0: GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call,
default1
Close the moving alarm.
Check the status and the parameters of the moving alarm.
A=ON/OFF, open or close over speed alarm, defaultOFF
B=5600 (second), time interval, default20 (second)
C=1255(km/h), speed limit, default100(km/h);
M=0/1, way of alarm, 0 : GPRS only, 1: SMS+GPRS, default1.
Check the parameters of over speed.
A=1-5: sensiticity range; default:2
LEVEL# check the current sensitivity of sensor
A=ON/OFF, LED sleep mode control,
ON: start LED sleep mode, OFF:LED normal display, defaultON
Check the parameters of LED sleep mode.
A= ON, enable the instruction password.
Numbers and letters mix inputs supported for instruction password, at
least 1 character, no more than 19 characters, default000000;
B=OFF, disable the instruction password.
A=old password, numbers and letters mix inputs supported, at least
1 character, no more than 19 characters, default000000;
B=new password, numbers and letters mix inputs supported, at least
1 character, no more than 19 characters.
A=instruction password, numbers and letters mix inputs supported,
at least 1 character, no more than 19 characters, default111111.
A=phone number, phone number to send;
B=SMS content, content to forward.
Only SOS1 can use this command.
