Compressed air filtration

product catalogue 2009

 The Science of Air...

...research...

...innovations...

...grand designs...
...great plans...

...giant ideas...
That’s what we are...
Faithfully trying to serve you...

Erik Krušec Špela Remic Tilen Lovrečič Katja Koritnik Luka Tršar
Sales manager - World market Sales&technical support Sales&technical support Sales&technical support Sales&technical support

T: +386 1 200 68 60 T: +386 1 200 68 61 T: +386 1 200 68 62 T: +386 1 200 68 64 T: +386 1 200 68 13
M: +386 30 362 140 F: +386 1 200 68 53 M: +386 30 362 180 F: +386 1 200 68 53 F: +386 1 200 68 53
F: +386 1 200 68 53 e: [email protected] F: +386 1 200 68 53 e: [email protected] e: [email protected]
e: [email protected] e: [email protected]

2
Our goal:
Top quality
Dear customers!
This year Omega Air is celebrating 20 years of existence.
During all these years we have been developing and
growing and today we have reach over 100 employees.

From the beginning our main goals are high quality of

the products and services and long-term customers’
satisfaction.

We are very proud that each year we gain a large number

of new customers. Our products are a result of long lasting
efforts and development. The main emphasis is given to
the innovation and realization of our own ideas. Our latest
achievement is new electronic condensate drain, which is a
new product on the market.

In the future our goals will remain the same - constant

adjustments to meet customers‘requirements, high quality
of our products and flexible team which is qualified to
follow the demanding world market. Edvard Sojer Alojz Dobnikar
general manager technical manager

Certificates

Quality Managenent Certificate ISO 9001:2000 i Certificate of Quality System Approval (module H1)

www.omega-air.si 3
 Product selection chart
FILTERS FOR INDUSTRIAL APPLICATIONS

400 bar
CHP
CHP series
100, 250, 400 bar

NEW!
carbon steel
high pressure filters

Filter selection
>> page 28-29

programme
250 bar

now available!
Send a request to our sales department!
AHP series
64 bar
100 bar
aluminium
high pressure filters
>> page 26-27
64 bar
AHP
50 bar
HF

HF series
20 bar CF
50 bar 16 bar
AF BF
cast aluminium
500 Nm3/h

1000 Nm3/h

2000 Nm3/h

5000 Nm3/h

10000 Nm3/h

20000 Nm3/h

30000 Nm3/h
high pressure filters
>> page 24-25

AF series CF series BF series

16 bar 20 bar 16 bar
aluminium aluminium welded steel
filters filters filters
>> page 6-7 >> page 10-11 >> page 20-21

FILTERS FOR SPECIAL APPLICATIONS

50 bar
HPF SF
HPF series 16 bar
50 bar SPF PF
500 Nm3/h

1000 Nm3/h

2000 Nm3/h

5000 Nm3/h

10000 Nm3/h

20000 Nm3/h

high pressure process

stainless steel filters
>> page 32-33

SF series
SPF series PF series
16 bar
16 bar 16 bar
stainless steel
stainless steel sterile filters stainless steel
sterile filters process filters
>> page 34-35
>> page 36-37 >> page 30-31

4
 Product selection chart
CONDENSATE SEPARATORS

CKL-B series 16 bar

16 bar
0 bar

500 Nm3/h

1000 Nm3/h

2000 Nm3/h

5000 Nm3/h

10000 Nm3/h

20000 Nm3/h
aluminium
condensate separators
3
>> page 8-9 /8’’ to 2 1/2’’

CS series 16 bar
16 bar
0 bar

500 Nm3/h

1000 Nm3/h

2000 Nm3/h

5000 Nm3/h

10000 Nm3/h

20000 Nm3/h
carbon steeel
condensate separators
>> page 22 DN80 to DN125

CS SS series 16 bar
16 bar
0 bar
500 Nm3/h

1000 Nm3/h

2000 Nm3/h

5000 Nm3/h

10000 Nm3/h

20000 Nm3/h
stainless steel
condensate separators
>> page 23 DN80 to DN100

ELECTRONIC CONDENSATE DRAINS MECHANICAL

CONDENSATE
16 bar
TD 16 DRAINS
16 bar
0 bar
50 l/h

100 l/h

150 l/h

200 l/h

250 l/h

300 l/h

timer controlled
condensate drain
MCD
>> page 16

TD 16S 16 bar
16 bar AOK 16S
0 bar
50 l/h

100 l/h

150 l/h

200 l/h

250 l/h

300 l/h

timer controlled
condensate drain
>> page 17 AOK 16B
ECD 15-40-90-150 16 bar
16 bar
0 bar
50 l/h

100 l/h

150 l/h

200 l/h

250 l/h

300 l/h

electronic AOK 20B

condensate drain
>> page 14-15
ECD15
>> page 18-19
ECD40 ECD90 ECD150

WATER-OIL SEPARATORS
16 bar

0 bar
WOS 4-8-20-35
500 Nm3/h

1000 Nm3/h

1500 Nm3/h

2000 Nm3/h

>> page 38-39 WOS-4 WOS-8 WOS-20 WOS-35

www.omega-air.si 5
 AF series - 16 bar
Compressed air filters

AF - Aluminium compressed air filters

Compressed air filters AF Series are used for efficient removal of solid
particles, water, oil vapours, taste and odours from compressed air in
industrial applications.

The type and size of filters depends of compressed air flow, type and quantity
of polution.

Available optional equipment is described on picture below.

- max. operating pressure: 16 bar (232 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

Standard equipment includes filter housing and filter cartridge.

OPTIONAL EQUIPMENT

PDI 16 MDM 60 MDM 60C MDM 60E MDA 60

sight glass - option

MCD AOK 16B AOK 20B TD16 TD16S ECD

B
Filter Pipe size Flow rate Dimensions [mm] Mass Flow rate Dimensions [inch] Mass
housing
inch Nm3/h A B C D kg SCFM A B C D lb
80

model
AF 0056 3/8’’ 60 187 88 20 60 0,7 35 7 3/8 3 1 /2 13
/16 2 3 /8 1,54
C

AF 0076 1/2’’ 78 187 88 20 60 0,7 46 7 3/8 3 1 /2 13

/16 2 3 /8 1,54
AF 0106 3/4’’ 120 257 88 20 80 0,8 70 10 1/16 3 1 /2 13
/16 3 1 /8 1,76
AF 0186 1’’ 198 263 125 32 100 1,8 116 10 5/16 4 15/16 1 5/16 3 7 /8 3,97
AF 0306 1’’ 335 363 125 32 120 2,5 197 14 1/4 4 15/16 1 5/16 4 11/16 5,51
A

AF 0476 1 1/2’’ 510 461 125 32 140 2,5 300 17 3/4 4 15/16 1 5/16 5 1 /2 5,51
AF 0706 1 1/2’’ 780 640 125 32 160 3,2 459 25 5/16 4 15/16 1 5/16 6 1 /4 7,05
AF 0946 2’’ 1000 684 163 43 520 5,1 588 27 3/8 6 3 /8 1 7 /8 20 1/2 11,25
AF 1506 2’’ 1500 935 163 43 770 7,1 882 36 3/4 6 3 /8 1 7 /8 30 5/16 15,65
3 3 7
AF 1756 2 1/2’’ 1680 935 163 43 770 6,9 990 36 /4 6 /8 1 /8 30 5/16 15,21
R 1/2’’ AF 2006 3 2160 795 240 59 630 12,9 1270 31 1/4 9 1 /2 2 3 /8 24 3/4 28,44
D

AF 2406 3 2760 1000 240 59 780 14,0 1620 39 1/3 9 1 /2 2 3 /8 30 11/16 30,86

CORRECTION FACTORS
Operating pressure [bar] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Operating pressure [psi] 29 44 58 72 87 100 115 130 145 160 174 189 203 218 232
Correction factor 0,38 0,52 0,63 0,75 0,88 1,00 1,13 1,26 1,38 1,52 1,65 1,76 1,87 2,00 2,14

6
 AF filter cartridges

Filter cartridges
Omega Air filter cartridge production includes 6 filtration
stages (B, P, R, M, S and A), which are designed to remove
particulates, water, oil vapours, taste and odours from
compressed air.

The design of filter media ensures the effective and efficient

removal most of contaminates in compressed air systems. Note
that these filters will not remove carbon monoxide or carbon
dioxide.

All materials are suitable for operation in the temperature

range from 1,5 to 65 °C (35 to 149°F). They are corrosion-proof
and suitable for most of applications.

The filter and cartridge size is determined by the compressed air

flow. They are all designed for operation pressure up to 16 bar
(232 psi).

Flow rate Max. oper. Max. B P R M S A

Cartridge Filter’s
pressure operating sintered prefilter prefilter microfilter microfilter active
size housing
3
m /h SCFM [bar/psi] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

06050 60 35 16/232 65/149 AF 0056 06050 B15 06050 P 06050 R 06050 M 06050 S 06050 A
07050 78 46 16/232 65/149 AF 0076 07050 B15 07050 P 07050 R 07050 M 07050 S 07050 A
14050 120 70 16/232 65/149 AF 0106 14050 B15 14050 P 14050 R 14050 M 14050 S 14050 A
12075 198 116 16/232 65/149 AF 0186 12075 B15 12075 P 12075 R 12075 M 12075 S 12075 A
22075 335 197 16/232 65/149 AF 0306 22075 B15 22075 P 22075 R 22075 M 22075 S 22075 A
32075 510 300 16/232 65/149 AF 0476 32075 B15 32075 P 32075 R 32075 M 32075 S 32075 A
50075 780 459 16/232 65/149 AF 0706 50075 B15 50075 P 50075 R 50075 M 50075 S 50075 A
51090 1000 588 16/232 65/149 AF 0946 51090 B15 51090 P 51090 R 51090 M 51090 S 51090 A
76090 1500 882 16/232 65/149 AF 1506 76090 B15 76090 P 76090 R 76090 M 76090 S 76090 A
76090 1680 990 16/232 65/149 AF 1756 76090 B15 76090 P 76090 R 76090 M 76090 S 76090 A
51140 2160 1270 16/232 65/149 AF 2006 51140 B15 51140 P 51140 R 51140 M 51140 S 51140 A
75140 2760 1620 16/232 65/149 AF 2406 75140 B15 75140 P 75140 R 75140 M 75140 S 75140 A

B P R M S A
solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

3
residual oil content [mg/m / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 120 / 1,74 <90 / 1,3

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.

www.omega-air.si 7
 CKL-B series
Condensate separators

CKL-B - Aluminium condensate separators

Efficient removal of condensate from a compressed air system has

several advantages: extended life of compressed air tools, improved
lubrication of all pneumatic components, improved painting
processes, reduced corrosion, and elimination of freezing.

These advantages can all be achieved with the installation of Omega

Air CKL-B Cyclone separators. This high-efficiency separators will
remove condensed water droplets, with a very low pressure drop.
They also provide added protection and improved performance for
dryers and filters.

Typically, water separators are installed downstream of after coolers,

air receivers, refrigerant dryers and strategic points in pipe work
installation.

Standard equipment includes automatic condensate drain AOK 16B.

- max. operating pressure: 16 bar (232 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

MCD
AOK 16B
TD16 TD16S
AOK 20B ECD

CORRECTION FACTORS
Operating pressure [bar] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Operating pressure [psi] 29 44 58 72 87 100 115 130 145 160 174 189 203 218 232
Correction factor 0,53 0,65 0,76 0,84 0,92 1,00 1,07 1,13 1,19 1,25 1,31 1,36 1,41 1,46 1,51

8
 Condensate separators
Benefits
Construction of aluminium cyclone separators assures high efficiency condensate separation with low pressure drop.

Cartridge inside Cyclone separator assures reliable operation for the life of the separator, with no possibility of clogging and
increased operating costs.

Condensate Cyclone separator CKL-B satisfies all needs of applications in a wide temperature range from 1,5 to 65 °C (35 to
149 °F) and in a pressure range up to 16 bar (232 psi).

All alluminium separator bodies are coated with powder paint to eliminate corrosion.

Threaded connections are BSP according to ISO7/1 or NPT to ANSI B2.1, if supplied in North America.

air

condensate
(oil, water)
B
Connection
Flow rate Dimensions [mm] Dimensions [inch] Mass
Model size
C

inch Nm3/h SCFM A B C D A B C D kg lb

CKL 005 B 3/8 120 70 187 88 21 60 7 3/8 3 1/2 13
/16 2 5/16 0,7 1,54
CKL 007 B 1/2 155 91 187 88 21 60 7 3/8 3 1/2 13
/16 2 5/16 0,7 1,54
A

CKL 010 B 3/4 235 138 257 88 21 80 10 1/8 3 1/2 13

/16 3 1/8 0,8 1,76
CKL 018 B 1 365 215 262 125 33 100 10 5/16 4 15/16 1 5/16 3 15/16 1,9 4,19
CKL 047 B 1 1/2 770 452 452 125 33 140 17 13/16 4 15/16 1 5/16 5 1/2 2,8 6,17
CKL 094 B 2 1280 753 695 163 43 520 27 3/8 6 7/16 1 11/16 20 1/2 5,3 11,7
CKL 150 B 2 1/2 2460 1447 695 163 43 520 27 3/8 6 7/16 1 11/16 20 1/2 9,2 20,3
R 1/2’’
D

CKL 200 B 3 2850 1677 795 240 59 630 31 5/16 9 1/2 2 5/16 24 3/4 13,4 29,5

www.omega-air.si 9
 CF series - 20 bar

CF - Aluminium compressed air filters

Compressed air filters CF Series are used for efficient removal of solid
particles, water, oil vapours, taste and odours from compressed air in
industrial applications.

The type and size of filters depends of compressed air flow, type and
quantity of polution.

- max. operating pressure: 20 bar (290 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

B
Pipe size Flow rate Dimensions [mm] Flow rate Dimensions [inch]
Filter
housing
80

model inch Nm3/h A B C D SCFM A B C D

C

CF 20 3/8’’ 72 187 88 20 80 42 7 3/8 3 7/16 3

/4 3 1/8
CF 21 1/2’’ 96 256 88 20 80 56 10 1/16 3 7/16 3
/4 3 1/8
CF 30 1/2’’ 150 278 106 25 100 88 10 15/16 4 3/16 1 4
CF 31 3/4’’ 216 278 106 25 100 127 10 15/16 4 3/16 1 4
CF 40 1’’ 282 252 125 32 120 166 9 7/8 4 7/8 1 1/4 4 11/16
A

CF 41 1’’ 360 352 125 32 140 212 13 7/8 4 7/8 1 1/4 5 1/2
CF 42 1 1/4’’ 432 352 125 32 140 254 13 7/8 4 7/8 1 1/4 5 1/2
CF 43 1 1/2’’ 510 450 125 32 160 300 17 7/8 4 7/8 1 1/4 4 5/16
CF 44 1 1/2’’ 750 450 125 32 160 441 17 7/8 4 7/8 1 1/4 4 5/16
CF 50 2’’ 888 605 160 43 180 522 23 3/4 4 5/16 1 5/8 7 1/8
CF 51 2’’ 1176 605 160 43 180 692 23 3/4 4 5/16 1 5/8 7 1/8
CF 52 2 1/2’’ 1440 685 160 43 200 847 27 4 5/16 1 5/8 7 7/8 R 1/2’’
D

1 7 3
CF 60 3’’ 1968 1070 240 60 300 1158 42 /8 9 /16 2 /8 11 3/4
CF 61 3’’ 2760 1070 240 60 300 1624 42 1/8 9 7/16 2 3/8 11 3/4
CORRECTION FACTORS
Operating pressure [bar] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Correction factor 0,38 0,52 0,63 0,75 0,88 1,00 1,13 1,26 1,38 1,52 1,65 1,76 1,87 2,00 2,14

10
 CF filter cartridges

CF Filter cartridge range includes 6 filtration stages (B, P, R, M, S and A),

which are designed to remove particulates, water, oil vapours, taste and
odours from compressed air.

The design of CF Filter media ensures the effective and efficient removal
most of contaminates from compressed air systems. Note that these
filters will not remove carbon monoxide or carbon dioxide.

Threaded connection of filter cartridge end cap ensures reliable fitting

into filter head.

All materials are suitable for operation in the temperature range from
1,5 to 65 °C (35 to 149°F). They are corrosion-proof and suitable for most
of applications.

The filter and cartridge size is determined by the compressed air flow.
They are all designed for operation pressure up to 20 bar (290 psi).

Flow rate Max. operat- Max. B P R M S A

Filter’s
ing pressure operating sintered prefilter prefilter microfilter microfilter active
housing m3/h SCFM [bar/psi] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

CF 20 72 42 20/290 65/149 20 CB 20 CP 20 CR 20 CM 20 CS 20 CA
CF 21 96 56 20/290 65/149 21 CB 21 CP 21 CR 21 CM 21 CS 21 CA
CF 30 150 88 20/290 65/149 30 CB 30 CP 30 CR 30 CM 30 CS 30 CA
CF 31 216 127 20/290 65/149 31 CB 31 CP 31 CR 31 CM 31 CS 31 CA
CF 40 282 166 20/290 65/149 40 CB 40 CP 40 CR 40 CM 40 CS 40 CA
CF 41 360 212 20/290 65/149 41 CB 41 CP 41 CR 41 CM 41 CS 41 CA
CF 42 432 254 20/290 65/149 42 CB 42 CP 42 CR 42 CM 42 CS 42 CA
CF 43 510 300 20/290 65/149 43 CB 43 CP 43 CR 43 CM 43 CS 43 CA
CF 44 750 441 20/290 65/149 44 CB 44 CP 44 CR 44 CM 44 CS 44 CA
CF 50 888 522 20/290 65/149 50 CB 50 CP 50 CR 50 CM 50 CS 50 CA
CF 51 1176 692 20/290 65/149 51 CB 51 CP 51 CR 51 CM 51 CS 51 CA
CF 52 1440 847 20/290 65/149 52 CB 52 CP 52 CR 52 CM 52 CS 52 CA
CF 60 1968 1158 20/290 65/149 60 CB 60 CP 60 CR 60 CM 60 CS 60 CA
CF 61 2760 1624 20/290 65/149 61 CB 61 CP 61 CR 61 CM 61 CS 61 CA

B P R M S A

solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

3
residual oil content [mg/m / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 <90 / 1,3 120 / 1,74

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.
www.omega-air.si 11
 Compressed air equipment

PDI 16 - Pressure drop indicator

PDI 16 saves compressed air energy by indicating when the filter element needs to be changed. If
the filter element is clean, the indicator remains green. It changes to red when the filter is clogged
and should be changed.

Technical data

- green area: pressure drop 0 - 0,6 bar (0 - 8,7 psi)

- red area: pressure drop 0,6 - 0,9 bar (8,7 - 13 psi)
- max. operating pressure: 16 bar (232 psi)
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

MDA 60 - Pressure drop indicator

Pressure drop indicator MDA 60 is used to accurately display the pressure drop across the filter.
The housing is made of aluminium alloy, which is available either in white or aluminium colour.
On a special customer’s request it can also be painted in any colour from RAL list.

Technical data

- max. operating pressure: 16 bar (232 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- measuring range: +/- 2 bar (+/- 29 psi)

MDM 60, MDM 60E, MDM 60C - Pressure drop indicators

The Magnetic pressure drop indicator MDM60 is available in three versions:

- basic version MDM 60
- electonic version MDM 60E (with LED alarm light for cartridge changing)
- voltage-free dry contact version MDM 60C for remote alarm

Technical data

- green area: pressure drop 0 - 0,6 bar (0 - 8,7 psi)

- red area: pressure drop 0,6 - 0,9 bar (8,7 - 13 psi)
- max. operating pressure: 16 bar (232 psi)
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

MDM 60 MDM 60E MDM 60C

12
 AK - Filter assembly kit

AK - Assembly kit for filters

It is used for assembling of two, three or more
filters together.

It includes supporting elements, which can

be easily mounted to the walls or other
elements.

Universal usage
Construction of assenbly kit is universal and
it can be used for any filter types, including
filters of other world producers.

www.omega-air.si 13
 ECD series

ECD series - Electronic condensate drains

The new generation of electronic condensate drains - ECD

series, is used for the automatic discharge of accumulated
condensate from compressed air systems. The basic
principle is contactless measurement of the acumulated
condensate which is then discharged without the loss of
valuable compressed air.

Condensate flow constantly flushes debris out of the valve.

Thats why uninterrupted operating is guaranteed.

Incorrect plunger position is first sign of debris blocking

the valve. By detecting incorrect position, blocked plunger
release procedure is started.
This procedure assures safety and reliable plunger
operating. No staff intervention is needed. This procedure
starts automatilally.

ECD Series is made of aluminium housing with plastic

cover, which protects electronics inside the device from
outside harmful conditions.

Benefits
- aluminium housing
- integrated filter mesh
- compact design
- two-way connections
- eloxated housing
- contactless measuring
- NEW: direct acting, self cleaning valve (patented)
- NEW: blocked plunger release procedure
- NEW: operating diagnostic monitoring
- warning LED light for ’’drain operating’’ and ’’alarm’’
- AC versions (for DC version please contact Omega Air)
- IP 54 electrical protection

14
 Electronic condensate drain

Type ECD 15 ECD 40 ECD 90 ECD 150

115 VAC 115 V ± 10% 115 V ± 10% 115 V ± 10% 115 V ± 10%
Voltage
230 VAC 230 V ± 10% 230 V ± 10% 230 V ± 10% 230 V ± 10%
115 VAC 24 VA 24 VA 24 VA 24 VA
Power
230 VAC 24 VA 24 VA 24 VA 24 VA
Frequency 50-60 Hz
Operating pressure 0-16 bar (0 - 232 psi)
Drain capacity (at 7 bar/101 psi) 15 l/h (0,0088 cfm) 40 l/h (0,023 cfm) 90 l/h (0,053 cfm) 150 l/h (0,088 cfm)
Operating temperature range 1,5 - 65°C (35-149°F)
Inlet connection R 1/2’’ R 1/2’’ R 1/2’’ R 1/2’’
Outlet connection R 1/8’’ R 1/8’’ R 1/8’’ R 1/8’’
Power interface 3 × 0,75 mm2 3 × 0,75 mm2 3 × 0,75 mm2 3 × 0,75 mm2
Protection class IP54 IP54 IP54 IP54
Mass [kg] 0,9 0,9 1,05 1,15
Dimensions A × B × C [mm] 120 × 82 × 125 120 × 82 × 125 120 × 82 × 135 120 × 82 × 150

Peak compressor 11,6 29,4 60,6 111,6

performance 9,3 23,5 48,5 89,3
[m3/min] 5,8 14,7 30,3 55,8
23,2 58,8 121,2 223,2
Peak dryer performance
18,6 47,0 97,0 178,6 C
[m3/min]
11,6 29,4 60,6 111,6
116 294 606 1116
Peak filter performance
93 235 485 893
[m3/min] A
58 147 303 558
B

Compressor motor power [kW] up to 30 37-75 90-160 200-315*

* Higher motor power capacities available on request. Please contact Omega Air.

Please take the relevant climate zone into account when dimensioning yours specific ECD drain series application:
Northern Europe, Canada, Northern USA, Central Asia
Central and Southern Europe, Central America
South East Asian coastal regions, Oceania, Amazon and Congo regions

www.omega-air.si 15
 TD 16

TD16 - Timer controlled condensate drain

TD16 is condensate drain which allows the user

to discharge condensate for a controlled time
and duration.

Its purpose is draining acumulated condensate

from filters or pressure vessels. TD16 is
adaptable according to different applications,
discharge frequency and opening time.

Benefits
- easy opening time settings
- easy opening frequency settings
- no moving parts
- reliable operating without clogging and unsensible to
outside conditions
- test button
- warning LED light for condense disposal phase
- DC and AC versions

Technical Data
- min/max operating temperature: 1,5 to 65 °C (35 to 149 °F)
- min/max operating pressure: 0-16 bar / 0-232 psi
- input connection: R 1/2”
- output connection: R 1/8”
- output pipe diameter: 6-8 mm
- capacity at 10 bar (145 psi): 0,2 - 300 l/h / 0,00012 - 0,17 cfm
- mass: 0,35 kg / 0,77 lb

Protection Cable Dimensions

Model Voltage Frequency El. power
class dimension A B C
A
TD16 24 VAC 24 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2 92 mm 97 mm 68 mm
TD16 115 VAC 115 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2 3 5/8 inch 3 13/16 inch 2 5/8 inch
TD16 230 VAC 230 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2 B
C

16
 TD16 S

TD16S- Timer controlled condensate drain

TD16 is condensate drain which allows the user

to discharge condensate for a controlled time
and duration.

Its purpose is draining acumulated condensate

from filters or pressure vessels. TD16 is
adaptable according to different applications,
discharge frequency and opening time.

Benefits
- easy opening time settings
- easy opening frequency settings
- no moving parts
- reliable operating without clogging and unsensible to
outside conditions
Technical data - test button
- warning LED light for condense disposal phase
- min/max operating temperature: 1,5 to 65 °C (35 to 149 °F) - DC and AC versions
- min/max operating pressure: 0-16 bar / 0-232 psi
- Input connection: R 1/2”
- output connection: R 1/8”
- output pipe diameter: 6-8 mm
- capacity at 10 bar (145 psi): 0,2 - 114 l/h
- mass: 0,35 kg

C
Protection Cable Dimensions
Model Voltage Frequency El. power
class dimension A B C
TD16 24 VAC 24 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2 88 mm 90 mm 123 mm
TD16 115 VAC 115 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2 3 7/16 inch 3 1/2 inch 4 7/8 inch
TD16 230 VAC 230 V +/- 10% 50-60 Hz 18 W IP54 3 x 0,75 mm2
B

www.omega-air.si 17
 AOK 20B

Automatic condensate drain - 20 bar

AOK 20B - Automatic Condensate Drain

The AOK 20 is used when larger amounts of condensate (up to 300 l/
h) must be automatically discharged from filters, pressure vessels and
cyclone separators. It ensures reliable operation up to 20 barg (290
psig).
When the condensate exceeds the discharge level, the float rises,
opens the discharge aperture and discharges condensate from the
system. We reccomend the installation of the nipple, which improves
the performance of the AOK 20B.

Technical data
- material: aluminium alloy
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- operating pressure range: 0 - 20 bar (0 - 290 psi)
- connection: R 1/2’’
- oil resistant o-ring

1/2’’

107

130
132

1/2’’

18
 MCD, AOK 16S, AOK 16B

Mechanical condensate drains

MCD - Manual Condensate Drain
Manual Condensate Drains MCD are used for discharging condensate from filters and other vessels with
1/2’’ drain connections. In order to prevent condensate from becoming re-entrained in the airstream we
reccomend controlling the condensate level in filter bowl, which requires an automatic drain trap. For
improved, automatic discharge we recommend the use of other Omega Air products.

Technical data
- material: brass
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- operating pressure range: 0-16 bar (0-232 psi)
- connection: R 1/2’’
- oil resistant o-ring

AOK 16S - Automatic Condensate Drain

AOK 16S is primarly used in filters. Its task is the automatic discharge of condensate and oil from the
system.
A manual emergency drain allows the operator to manually drain the filter, and confirm the automatic
operation.

Technical data
- material: durable plastic, brass
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- operating pressure range: 0-16 bar (0-232 psi)
- connection: R 3/8’’
- oil resistant o-ring

AOK 16B - Automatic Condensate Drain

AOK 16B is primarly used in filters. Its task is the automatic discharge of condensate and oil. When the
accumulated condensate exceeds to discharge level, the float rises, opens the outlet aperture, and
discharges condensate from the system.
A manual emergency drain allows the operator to manually drain the filter, and confirm the automatic
operation.

Technical data
- material: durable plastic, brass
- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- operating pressure range: 0-16 bar (0-232 psi)
- connection: R 1/2’’
- oil resistant o-ring

www.omega-air.si 19
 BF series - 16 bar
Compressed air filters

BF - Welded compressed air filters

BF Welded compressed air filters are used for compressed air
filtration in large capacity compressed air systems. Ten different
sizes covers a wide flow range.

BF Filters are made of quality steel in accordance with Pressure

Equipment Directive PED 97/23/CE. Number of filter cartridges
depends of filter size.

There are 6 filtration stages available. Differential pressure

indicators and Condensate drains can be optionally mounted on
all types of BF filters. Filters are protected against corrosion by RAL
colour painting. On customer’s request, we can offer epoxy painting
or hot-dipped galvanizing.

- max. operating pressure: 16 bar (232 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)
- filter cartridge type: 76090

B
øD
E

SIZES: SIZES:
BF 0240 BF 1200
BF 0300 BF 1500
A

øD
BF 0450 BF 1800
A

BF 0600 BF 2500
C min

BF 0900 BF 3000

min.200 mm
min.650 mm

Connection Flow rate

Filter Dimensions [mm] Dimensions [inch] Mass No. of car-
size (at 7 bar)
model tridges
3
DN Nm /h SCFM A B C D E A B C D E kg lb
BF 0240 80 2200 1294 1170 450 1645 219,1 177 46 18 65 8 1/2 25 1/2 61 134 1
BF 0300 100 3150 1853 1340 560 1760 323,9 227 52 1/2 22 69 1/2 13 9 115 253 2
BF 0450 125 4700 2765 1360 560 1780 323,9 227 53 1/2 22 70 13 9 123 271 3
BF 0600 150 6300 3706 1425 620 1810 368 265 56 24 1/2 71 1/2 14 1/2 10 1/2 151 333 4
BF 0900 150 9400 5530 1480 680 1850 419 650 58 1/2 26 1/2 73 16 1/2 11 218 480 6
BF 1200 200 12550 7382 1835 792 510 508 280 72 1/2 31 20 20 - 320 705 8
BF 1500 200 15700 9235 1880 918 535 609,6 - 74 36 21 24 - 455 1003 10
BF 1800 250 18850 11088 1950 955 555 609,6 - 76 1/2 37 1/2 22 24 - 500 1102 12
BF 2500 250 25100 14765 2060 1042 645 711,2 - 81 41 25 1/2 28 - 590 1300 16
BF 3000 300 31400 18470 2130 1085 680 711,2 - 84 42 1/2 26 1/2 28 - 684 1508 20

CORRECTION FACTORS
Operating pressure [bar] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Operating pressure [psi] 29 44 58 72 87 100 115 130 145 160 174 189 203 218 232
Correction factor 0,53 0,65 0,76 0,84 0,92 1,00 1,07 1,13 1,19 1,25 1,31 1,36 1,41 1,46 1,51

20
 BF filter cartridges

Filter cartridges
Omega Air filter cartridge production includes 6 filtration stages (B, P,
R, M, S and A), which are designed to remove particulates, water, oil
vapours, taste and odours from compressed air.

The design of filter media ensures the effective and efficient removal
most of contaminates in compressed air systems. Note that these filters
will not remove carbon monoxide or carbon dioxide.

All materials are suitable for operation in the temperature range from
1,5 to 65 °C (35 to 149°F). They are corrosion-proof and suitable for most
of applications.

The filter and cartridge size is determined by the compressed air flow.
They are all designed for operation pressure up to 16 bar (232 psi).

Flow rate Max. oper. Max. B P R M S A

Cartridge Filter’s
pressure operating sintered prefilter prefilter microfilter microfilter active
size housing
3
m /h SCFM [bar/psi] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

76090 1500 882 16/232 65/149 All 76090 B15 76090 P 76090 R 76090 M 76090 S 76090 A

B P R M S A
solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

3
residual oil content [mg/m / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 120 / 1,74 <90 / 1,3

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.

www.omega-air.si 21
 CS series

CS - Welded condensate separators

CS Welded cyclone separators are used for the separation of
particulates and condensate from large capacity compressed
air systems.

They feature a combination of high efficiency and low pressure

drop. Tangential inlet connection enables perfect airflow,
which does not require additional guidance blades with
additional pressure drop.

Cyclone condensate separators are produced in accordance

with Pressure Equipment Directive PED 97/23 CE.

Cyclone separators are protected against corrosion by RAL

colour painting, which can be defined by customer. We
reccomend the use of condensate drains produced by our
company.

- max. operating pressure: 16 bar (232 psi)

- max. operating temperature: 120 °C (248 °F)

G
H

B
C

F
min 200 mm

Pipe
Flow rate Dimensions [mm] Dimensions [inch] Mass
Model size
DN Nm3/min SCFM A B C D E F G H A B C D E F G H kg lb
CS 14 DN80 14 495 745 182 88,9 88,9 1/2’’ 159,0 302 35 29 5/16 7 3/16 3 1 /2 3 1 /2 1
/2 6 1 /4 11 7/8 1 3 /8 23 50,7
CS 21 DN80 21 740 745 182 88,9 88,9 1/2’’ 159,0 302 35 29 5/16 7 3/16 3 1 /2 3 1 /2 1
/2 6 1 /4 11 7/8 1 3 /8 23 50,7
CS 28 DN80 28,5 1000 745 182 88,9 88,9 1/2’’ 159,0 302 35 29 5/16 7 3/16 3 1 /2 3 1 /2 1
/2 6 1 /4 11 7/8 1 3 /8 23 50,7
CS 62 DN125 62,0 2190 1041 280 133,0 133,0 1/2’’ 219,1 390 43 41 11 5 1 /4 5 1 /4 1
/2 8 5 /8 15 3/8 1 11/16 53 116,8

22
 CS SS series

CS SS - Stainless steel condensate separators

CS SS Welded cyclone separators are used for the separation of
particulates and condensate from large capacity compressed
air systems.

They feature a combination of high efficiency and low

pressure drop. Tangential inlet connection enables perfect
airflow, which does not require additional guidance blades
with additional pressure drop.

Cyclone condensate separators are produced in accordance

with Pressure Equipment Directive PED 97/23 CE. Stainless
steel material prevents corrosion of built in materials.

We reccomend the use of condensate drains produced by our

company.

- max. operating pressure: 16 bar (232 psi)

- max. operating temperature: 120 °C (248 °F)
- material: stainless steel

G
E

G
A

F
H

B
C

Flow rate Dimensions [mm] Mass F

Model Connection
[Nm3/min] [kg]
min 200 mm

A B C D E F G H
CS SS 14 DN80 14 745 182 88,9 88,9 1/2’’ 159,0 302 35 23

CS SS 21 DN80 21 745 182 88,9 88,9 1/2’’ 159,0 302 35 23 E

CS SS 28 DN80 28,5 745 182 88,9 88,9 1/2’’ 159,0 302 35 23

CS SS 48 DN100 36,6 800 0 108 108 1/2’’ 219,1 460 0 42

www.omega-air.si 23
 HF series - 50 bar

HF - Cast aluminium high pressure filters

High Pressure Filters HF are used for industrial applications

with pressure up to 50 bar (725 psi). Strong cast aluminium
construction assures safety operating at high pressures.

HF series is produced in accordance with Pressure Equipment

Directive PED 97/23 CE.

- max. operating pressure: 50 bar (725 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149 °F)

All filter housings are coated with powder paint colour to

prevent corrosion.

Connection
B Filter Flow rate Dimensions [mm] Dimensions [inch] Mass Filter
[D]
model cartridge
3
inch Nm /h SCFM A B C A B C kg lb
C

HF 007 1/2 450 265 250 110 30 9 7/8 4 5/16 1 3/16 2,1 4,63 HF 6060
D

HF 010 3/4 715 420 250 110 30 9 7/8 4 5/16 1 3/16 2,1 4,63 HF 7060
HF 018 1 1300 765 250 110 30 9 7/8 4 5/16 1 3/16 2,1 4,63 HF 12060
HF 047 1 1/2 1800 1059 535 160 45 21 1/16 6 5/16 1 3 /4 9,5 20,9 HF 22090
1 5
HF 070 1 1/2 2550 1500 535 160 45 21 /16 6 /16 1 3 /4 9,5 20,9 HF 32090
A

HF 094 2 3150 1853 715 160 45 21 1/8 6 5/16 1 3 /4 12,2 26,9 HF 50090
HF 150 2 5100 3000 715 160 45 21 1/8 6 5/16 1 3 /4 12,2 26,9 HF 51090

CORRECTION FACTORS
Operating pressure [bar] 4 6 8 10 15 20 30 40 50
Operating pressure [psi] 58 87 116 145 217 290 435 580 725
1/2’’ Correction factor 0,14 0,22 0,28 0,34 0,47 0,56 0,70 0,85 1,00

24
 HF filter cartridges

Six filtration grades enables elimination of impurities from

compressed air in a temperature range 1,5 to 65 °C
(35 to 149°F).

Flow rate Max. operat- Max. B P R M S A

Filter’s
ing pressure operating sintered prefilter prefilter microfilter microfilter active
housing Nm3/h SCFM [bar/psi] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

HF 007 450 265 50/725 65/149 HF 6060 B HF 6060 P HF 6060 R HF 6060 M HF 6060 S HF 6060 A
HF 010 715 420 50/725 65/149 HF 7060 B HF 7060 P HF 7060 R HF 7060 M HF 7060 S HF 7060 A
HF 018 1300 765 50/725 65/149 HF 12060 B HF 12060 P HF 12060 R HF 12060 M HF 12060 S HF 12060 A
HF 047 1800 1059 50/725 65/149 HF 22090 B HF 22090 P HF 22090 R HF 22090 M HF 22090 S HF 22090 A
HF 070 2550 1500 50/725 65/149 HF 32090 B HF 32090 P HF 32090 R HF 32090 M HF 32090 S HF 32090 A
HF 094 3150 1854 50/725 65/149 HF 50090 B HF 50090 P HF 50090 R HF 50090 M HF 50090 S HF 50090 A
HF 150 5100 3000 50/725 65/149 HF 51090 B HF 51090 P HF 51090 R HF 51090 M HF 51090 S HF 51090 A

B P R M S A

solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

residual oil content [mg/m3 / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 120 / 1,74 <90 / 1,3

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.

www.omega-air.si 25
 AHP series - 64 bar

AHP - Aluminium high pressure filters

Aluminum high pressure filters AHP are used for industrial

high pressure applications up to 64 bar (928 psi).

Strong construction is made of round aluminum bars. This

assures high mechanical properties and higher operating
safety.
On customer request filters can be shiny polished or
anodized.

AHP filters are made in 6 different filtration stages which

enables operating in a temperature range from 1,5 to 65 °C
(35 to 149°F).

- max. operating pressure: 64 bar (928 psi)

- operating temperature range: 1,5 to 65 °C (35 to 149°F)

Filter Connections
Flow rate Dimensions [mm] Mass
housing [D] Cartridge
model inch Nm3/h A B C kg
AHP 005 3/8’’ 30 167 104 90 2,25 HP 06050
B
AHP 007 1/2’’ 60 167 104 90 2,25 HP 07050
AHP 010 3/4’’ 120 232 104 90 2,84 HP 14050
AHP 018 1’’ 180 258 150 120 6,45 HP 12075
D

AHP 030 1 1/4’’ 270 358 150 120 7,8 HP 22075

AHP 047 1 1/2’’ 360 458 150 120 9,17 HP 32075
A

AHP 094 2’’ 720 665 170 150 18,9 HP 51090

CORRECTION FACTORS
Operating pressure [bar] 4 6 8 10 15 20 30 40 50 60 64
Operating pressure [psi] 58 87 116 145 217 290 435 580 725 870 928
Correction factor 0,14 0,22 0,28 0,34 0,47 0,56 0,70 0,85 0,88 0,91 1,00
C
1/2’’

26
 AHP filter cartridges

Filter cartridges for high pressure

applications are designed for pressure
range up to 64 bar.

Because of these operating parametres,

support mesh is made of durable
expanded stainless steel mesh, which
protects cartridge construction against
destruction.

End caps are made of aluminium, thread

on upper end cap additionally ensures
safety installation into filter head.

Flow rate Max. operat- Max. B P R M S A

Filter’s
ing pressure operating sintered prefilter prefilter microfilter microfilter active
housing Nm3/h SCFM [bar/psi] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

AHP 005 30 17,6 64/928 65/149 AHP 06050 B AHP 06050 P AHP 06050 R AHP 06050 M AHP 06050 S AHP 06050 A
AHP 007 60 35,3 64/928 65/149 AHP 07050 B AHP 07050 P AHP 07050 R AHP 07050 M AHP 07050 S AHP 07050 A
AHP 010 120 70,6 64/928 65/149 AHP 14050 B AHP 14050 P AHP 14050 R AHP 14050 M AHP 14050 S AHP 14050 A
AHP 018 180 106 64/928 65/149 AHP 12075 B AHP 12075 P AHP 12075 R AHP 12075 M AHP 12075 S AHP 12075 A
AHP 030 270 159 64/928 65/149 AHP 22075 B AHP 22075 P AHP 22075 R AHP 22075 M AHP 22075 S AHP 22075 A
AHP 047 360 212 64/928 65/149 AHP 32075 B AHP 32075 P AHP 32075 R AHP 32075 M AHP 32075 S AHP 32075 A
AHP 094 720 423 64/928 65/149 AHP 51090 B AHP 51090 P AHP 51090 R AHP 51090 M AHP 51090 S AHP 51090 A

B P R M S A
solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

residual oil content [mg/m3 / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 120 / 1,74 <90 / 1,3

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.

www.omega-air.si 27
 CHP series - 100-250-400 bar

CHP - Carbon steel high pressure filters

Carbon steel high pressure filters CHP are used for industrial
high pressure applications up to 400 bar (5800 psi).

Extremely strong construction is made of round carbon steel

bars. This assures high mechanical properties and higher
operating safety.

CHP filters are made in 6 different filtration stages which

enables operating in a temperature range from 1,5 to 65 °C
(35 to 149°F).

- max. operating pressure: 100, 250, 400 bar

- operating temperature range: 1,5 to 65 °C (35 to 149°F)

- material certificate: EN 10204 – 3,18

- material: C22,8 – chem. Nickel (25μm)

Connections
Model Flow rate Dimensions [mm] Mass
[D] Cartridge size
filtra
inch Nm3/h A B C kg
B CHP 003 1/4’’ 40 165 83,5 70 4,6 0305
CHP 005 3/8’’ 70 165 83,5 70 4,6 0310
CHP 007 1/2’’ 130 210 105 85 8,7 0420
CHP 010 3/4’’ 195 210 105 85 9,3 0520
D

CHP 018 1’’ 275 253 119 100 11,6 0525

CHP 030 1 1/4’’ 380 303 119 100 16 0725
A

CHP 047 1 1/2’’ 495 329 146 130 26,5 0730

CHP 094 2’’ 715 415 182 150 49 1030

CORRECTION FACTORS
Operating pressure [bar] 25 40 64 100 250 400
C Operating pressure [psi] 362 580 928 1450 3625 5800
1/2’’ Correction factor 3 5 8 12 12 12

28
 CHP filter cartridges

Filter cartridges for high pressure applications are designed for

pressure range up to 400 bar.

Because of these operating parametres, support mesh is made

of durable expanded stainless steel mesh, which protects
cartridge construction against destruction.

End caps are made of aluminium, thread on upper end cap

additionally ensures safety installation into filter head.

Flow rate Max. operat- Max. B P R M S A

Filter’s
ing pressure operating sintered prefilter prefilter microfilter microfilter active
housing Nm3/h SCFM [bar] temp. [°C/°F] 15 μm 3 μm 1 μm 0,1 μm 0,01 μm carbon

CHP 003 40 23,5 100/250/400 65/149 CHP 0305 B CHP 0305 P CHP 0305 R CHP 0305 M CHP 0305 S CHP 0305 A
CHP 005 70 41,2 100/250/400 65/149 CHP 0310 B CHP 0310 P CHP 0310 R CHP 0310 M CHP 0310 S CHP 0310 A
CHP 007 130 76,5 100/250/400 65/149 CHP 0420 B CHP 0420 P CHP 0420 R CHP 0420 M CHP 0420 S CHP 0420 A
CHP 010 195 115 100/250/400 65/149 CHP 0520 B CHP 0520 P CHP 0520 R CHP 0520 M CHP 0520 S CHP 0520 A
CHP 018 275 162 100/250/400 65/149 CHP 0525 B CHP 0525 P CHP 0525 R CHP 0525 M CHP 0525 S CHP 0525 A
CHP 030 380 223 100/250/400 65/149 CHP 0725 B CHP 0725 P CHP 0725 R CHP 0725 M CHP 0725 S CHP 0725 A
CHP 047 495 291 100/250/400 65/149 CHP 0730 B CHP 0730 P CHP 0730 R CHP 0730 M CHP 0730 S CHP 0730 A
CHP 094 715 421 100/250/400 65/149 CHP 1030 B CHP 1030 P CHP 1030 R CHP 1030 M CHP 1030 S CHP 1030 A

B P R M S A
solid particle size purification: down to 15 microns 3 microns 1 micron 0,1 micron 0,01 micron -

quality class - solids (ISO 8573-1) 4 3 2 1 1 -

3
residual oil content [mg/m / ppm] - - - 0,1 / 0,08 0,01 / 0,01 0,005 / 0,005

quality class - oils (ISO 8573-1) - - - 2 1 1

pressure drop - new element [mbar / psi] 30 / 0,43 40 / 0,58 <50 / 0,72 <80 / 1,16 120 / 1,74 <90 / 1,3

change filter cartridge at pressure drop [mbar / psi] 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 600 / 8,7 *every 6 months

filter material sintered brass acrile fibres, celulose borosilicate micro fibres active carbon

pleated version - + + + + -

wrapped version - + + + + +

sintered version + - - - - -

* Filter elements ’’A’’ must be changed periodically to suit application but at least every 6 months. Activated carbon filters must not operate in oil
saturated conditions.

www.omega-air.si 29
 PF series - 16 bar

PF - Stainless steel process filters

Process Filters PF are designed for applications in process industry,
where the risk for corrosion of compressed air system components
is very high.

PF filters are therefore made of high quality stainless steel for

pharmaceutical industry (quality 1.4404(316L)). Housing is
polished down to grade Ra1.6.

Filter housings can include BSP or NPT pipe connections.

Every product is tested several times to assure reliability and
quality of our products.

- max. operating pressure: 10 (12,16) bar

- operating temperature range: up to 150 °C

E
øC

D
B
E

Dimensions [mm] Mass Operating

Connection Flow rate Filter’s
Filter model pressure
input & output [Nm3/h] cartridge size
A B C D E [kg] [bar]

PF 005 1/4’’ 75 200 116 76,1 56 1/4’’ 1,7 16 1x0310

PF 007 3/8’’ 105 231 120 76,1 56 1/4’’ 1,9 16 1x0410
PF 010 1/2’’ 150 231 125 76,1 56 1/4’’ 1,9 16 1x0420
PF 018 3/4’’ 225 253 125 76,1 56 1/4’’ 2,0 16 1x0520
PF 030 1’’ 315 272 136 88,9 63 1/4’’ 2,6 16 1x0525
PF 047 1 1/4’’ 420 334 155 88,9 63 1/4’’ 3,0 16 1x0725
PF 070 1 1/2’’ 600 386 180 114,3 88 1/4’’ 4,3 16 1x0730
PF 094 2’’ 900 453 180 114,3 88 1/4’’ 4,8 16 1x1030
PF 150 2’’ 1260 580 180 114,3 88 1/4’’ 5,3 16 1x1530
PF 175 2 1/2’’ 1680 740 224 139,7 103 1/4’’ 9,0 16 1x2030
PF 200 3’’ 2400 1008 224 139,7 113 1/4’’ 10,8 12 1x3030
PF 240 3’’ 3600 1040 255 168,3 118 1/4’’ 16,2 12 1x3050
PF 450 DN100 5040 986 410 219,1 170 1’’ 45 10 3x2030
PF 600 DN100 6720 1240 410 219,1 170 1’’ 46 10 3x3030
PF 900 DN150 9600 1300 480 273,0 212 1’’ 70 10 4x3030
PF 1200 DN150 13440 1350 540 323,9 222 1’’ 80 10 6x3030
PF 1800 DN200 17280 1500 660 406,4 272 1’’ 135 10 8x3030
PF 2000 DN200 21120 1500 660 406,4 272 1’’ 135 10 10x3030

30
 PF filter cartridges

Process sintered stainless steel filter cartridges

are made of sintered stainless steel of 1.4404
quality, which unsures safety operating without
risk for corrosion.

There are two additional filter grades, made of

sintered bronze (15 μm) and borosilicate micro
paper (0,01 μm) .

PI PB PPM Max. oper.

Flow rate
pressure Filter’s housing
[Nm3/h]
25 μm 15 μm 0,01 μm [bar]
1x0310-PI 1x0310-PB 1x0310-PPM 75 16 PF 005
1x0410-PI 1x0410-PB 1x0410-PPM 105 16 PF 007
1x0420-PI 1x0420-PB 1x0420-PPM 150 16 PF 010
1x0520-PI 1x0520-PB 1x0520-PPM 225 16 PF 018
1x0525-PI 1x0525-PB 1x0525-PPM 315 16 PF 030
1x0725-PI 1x0725-PB 1x0725-PPM 420 16 PF 047
1x0730-PI 1x0730-PB 1x0730-PPM 600 16 PF 070
1x1030-PI 1x1030-PB 1x1030-PPM 900 16 PF 094
1x1530-PI 1x1530-PB 1x1530-PPM 1260 16 PF 150
1x2030-PI 1x2030-PB 1x2030-PPM 1680 16 PF 175
1x3030-PI 1x3030-PB 1x3030-PPM 2400 12 PF 200
1x3050-PI 1x3050-PB 1x3050-PPM 3600 12 PF 240
3x2030-PI 3x2030-PB 3x2030-PPM 5040 10 PF 450
3x3030-PI 3x3030-PB 3x3030-PPM 6720 10 PF 600
4x3030-PI 4x3030-PB 4x3030-PPM 9600 10 PF 900
6x3030-PI 6x3030-PB 6x3030-PPM 13440 10 PF 1200
8x3030-PI 8x3030-PB 8x3030-PPM 17280 10 PF 1800
10x3030-PI 10x3030-PB 10x3030-PPM 21120 10 PF 2000
PI PB PPM
sintered INOX sintered bronze borosilicate paper filter material
25 μm 15 μm 0,01 μm solid particle size purification: down to
quality class - solids (ISO 8573-1)
quality class - oils (ISO 8573-1)
1,5-150°C 1,5-150°C 1,5-120°C(65°C*) operating temperature range
30 40 100 pressure drop - new element [mbar / psi]
600 600 600 change filter cartridge at pressure drop [mbar / psi]

* For silicone free binding materials!

www.omega-air.si 31
 HPF series - 50 bar

HPF - High pressure process filters - 50 bar

High pressure process filters HPF are designed for high

pressure applications in process industry, where the risk
for corrosion of compressed air system components is very
high.

HPF filters are therefore made of high quality stainless

steel for pharmaceutical industry (quality 1.4404(316L)).
Housing is polished down to grade Ra1.6.

Filter housings can include BSP or NPT pipe connections.

Every product is tested several times to assure reliability

and quality of our products.

- max. operating pressure: 50 bar

- operating temperature range: up to 150 °C

1/2’’
øC

B
1/2’’

Dimensions [mm] Operating

Flow rate Mass Filter’s
Filter model Connection pressure
[Nm3/h] [kg] cartridge size
A B C D [bar]

HPF 010/50 1/2’’ 450 243 108 76,1 55 2,5 50 1x0420

HPF 018/50 3/4’’ 715 266 125 76,1 55 2,6 50 1x0520
HPF 030/50 1’’ 1300 293 125 88,9 74 3,4 50 1x0525
HPF 047/50 1 1/4’’ 1800 344 140 88,9 74 3,9 50 1x0725
HPF 070/50 1 1/2’’ 2550 386 170 114,3 94 5,6 50 1x0730
HPF 094/50 2’’ 3150 460 170 114,3 94 6,2 50 1x1030
HPF 150/50 2’’ 5100 587 170 114,3 94 6,9 50 1x1530
HPF 200/50 3’’ 7200 987 216 139,7 106 14,1 50 1x3030

32
 HPF filter cartridges

High pressure process filter cartridges can be made in 4

different versions:
- sintered inox,
- microfilter paper,
- active carbon,
- sterile.

HPI HPM HPA HPS Max. oper.

Flow rate
pressure Filter’s housing
[Nm3/h]
25 μm 0.01 μm active carbon sterile [bar]
1x0420-HPI 1x0420-HPM 1x0420-HPA 1x0420-HPS 450 50 HPF 010/50
1x0520-HPI 1x0520-HPM 1x0520-HPA 1x0520-HPS 715 50 HPF 018/50
1x0525-HPI 1x0525-HPM 1x0525-HPA 1x0525-HPS 1300 50 HPF 030/50
1x0725-HPI 1x0725-HPM 1x0725-HPA 1x0725-HPS 1800 50 HPF 047/50
1x0730-HPI 1x0730-HPM 1x0730-HPA 1x0730-HPS 2550 50 HPF 070/50
1x1030-HPI 1x1030-HPM 1x1030-HPA 1x1030-HPS 3150 50 HPF 094/50
1x1530-HPI 1x1530-HPM 1x1530-HPA 1x1530-HPS 5100 50 HPF 150/50
1x3030-HPI 1x3030-HPM 1x3030-HPA 1x3030-HPS 7200 50 HPF 200/50
HPI HPM HPA HPS
sintered INOX borosilicate paper active carbon borosilicate microfibres filter material
25 μm 0.01 μm - 0.01 μm solid particle size purification: down to
quality class - solids (ISO 8573-1)
quality class - oils (ISO 8573-1)
up to 150°C up to 65°C up to 65°C up to 150°C operating temperature range
200°C short duration (max. 15 min) temperature limit
30 40 100 pressure drop - new element [mbar / psi]
600 600 600 change filter cartridge at pressure drop [mbar / psi]

www.omega-air.si 33
 SF series - 16 bar

SF - Stainless steel sterile filters

Stainless steel Sterile Filters SF are designed for removing of

impurities from compressed air applications in pharmaceutical,
chemical and food industry, in biotechnology, breweries,
dairies, hospitals and aseptic packaging.

SF filters are therefore made of high quality stainless steel

(quality 1.4404(316L)). Housing is polished down to grade
Ra0,8.

Filter media are borosilicate microfibres, which can eliminate

up to 99,99% of impurities sizes down to 0,01μm.

- max. operating pressure: 10 (16) bar

- operating temperature range: -20 – 150°C
- 15 min temp. limit during sterilisation: 200°C
E
øC

øC

A
A
D

B
B
E

Dimensions [mm] Mass Operating

Connection Flow rate
Filter model pressure Filter cartridge
DN / ø [Nm3/h]
A B C D E [kg] [bar]

SF 0006 DN10 / ø17,2 75 218 125 76,1 69 1/8’’ 1,6 16 1x0310-VSF

SF 0009 DN10 / ø17,2 105 246 125 76,1 69 1/8’’ 1,7 16 1x0410-VSF
SF 0012 DN15 / ø21,3 150 251 120 76,1 69 1/8’’ 1,7 16 1x0420-VSF
SF 0018 DN15 / ø21,3 225 275 120 76,1 69 1/8’’ 1,8 16 1x0520-VSF
SF 0032 DN25 / ø33,7 315 303 169 114,3 86 1/4’’ 3,1 16 1x0530-VSF
SF 0048 DN32 / ø42,4 600 363 169 114,3 86 1/4’’ 3,4 16 1x0730-VSF
SF 0072 DN40 / ø48,3 900 446 169 114,3 86 1/4’’ 3,6 16 1x1030-VSF
SF 0108 DN50 / ø60,3 1.260 585 183 114,3 96 1/4’’ 4,9 16 1x1530-VSF
SF 0144 DN65 / ø76,1 1.680 763 195 139,7 120 1/4’’ 8,4 16 1x2030-VSF
SF 0192 DN80 / ø88,9 2.400 1015 195 139,7 120 1/4’’ 10,2 16 1x3030-VSF
SF 0432 DN100 5.040 1012 410 219,1 183 1/2’’ 44 10 3x2030-VSF
SF 0576 DN100 6.720 1266 410 219,1 183 1/2’’ 45 10 3x3030-VSF
SF 0768 DN150 9.600 1326 480 273 225 1/2’’ 70 10 4x3030-VSF
SF 1152 DN150 13.440 1418 540 323,9 256 1’’ 80 10 6x3030-VSF
SF 1536 DN200 17.200 1568 660 406,4 306 1’’ 135 10 8x3030-VSF
SF 1920 DN200 21.120 1568 660 406,4 306 1’’ 135 10 10x3030-VSF

34
 SF filter cartridges

Filter media are high quality borosilicate microfibres,

which eliminates up to 99,99% of Impurities sized
down to 0,01μm.

Max. oper. Max. oper.

Flow rate
Sterile filter cartridge pressure temperature Filter’s housing
[Nm3/h]
[bar] [°C/°F]
1 x 0310-VSF 75 16 150/302 SF 0006
1x0410-VSF 105 16 150/302 SF 0009
1x0420-VSF 150 16 150/302 SF 0012
1 x 0520-VSF 225 16 150/302 SF 0018
1 x 0530-VSF 315 16 150/302 SF 0032
1 x 0730-VSF 600 16 150/302 SF 0048
1 x 1030-VSF 900 16 150/302 SF 0072
1 x 1530-VSF 1.260 16 150/302 SF 0108
1 x 2030-VSF 1.680 16 150/302 SF 0144
1 x 3030-VSF 2.400 16 150/302 SF 0192
3 x 2030-VSF 5.040 10 150/302 SF 0432
3 x 3030-VSF 6.720 10 150/302 SF 0576
4 x 3030-VSF 9.600 10 150/302 SF 0768
6 x 3030-VSF 13.440 10 150/302 SF 1152
8 x 3030-VSF 17.200 10 150/302 SF 1536
10 x 3030-VSF 21.120 10 150/302 SF 1920
VSF
0,01 μm solid particle size purification: down to
1 quality class - solids (ISO 8573-1)
- quality class - oils (ISO 8573-1)
30 pressure drop - new element [mbar / psi]
600 change filter cartridge at pressure drop [mbar / psi]
borosilicate micro fibres filter material

www.omega-air.si 35
 SPF series - 16 bar

SPF - Stainless steel sterile filters

SPF filters are designed for applications in process industry, where
the risk for corrosion of compressed air system components is very
high.

SPF filters are therefore made of high quality stainless steel for
pharmaceutical industry (quality 1.4404(316L)). Housing is
polished down to grade Ra 0,8.

Filter housings can include BSP or NPT pipe connections.

Every product is tested several times to assure reliability and

quality of our products.

- max. operating pressure: 10 (12, 16) bar

- operating temperature range: -20 – 150 °C
- short duration (15 min) temp. limit: up to 200 °C

Dimensions [mm] Operating

Flow rate Mass Filter’s
Filter model Connection pressure
[Nm3/h] [kg] cartridge size E
A B C D E [bar]
øC
SPF 005 1/4’’ 75 223 116 76,1 74 1/8’’ 1,7 16 1x0310
SPF 007 3/8’’ 105 254 120 76,1 74 1/8’’ 1,9 16 1x0410
SPF 010 1/2’’ 150 254 125 76,1 74 1/8’’ 1,9 16 1x0420
SPF 018 3/4’’ 225 276 125 76,1 74 1/8’’ 2,0 16 1x0520
SPF 030 1’’ 315 295 136 88,9 81 1/8’’ 2,6 16 1x0525
SPF 047 1 1/4’’ 420 357 155 88,9 81 1/8’’ 3,0 16 1x0725
A

SPF 070 1 1/2’’ 600 408 180 114,3 106 1/4’’ 4,3 16 1x0730
D

SPF 094 2’’ 900 476 180 114,3 106 1/4’’ 4,8 16 1x1030
SPF 150 2’’ 1260 602 180 114,3 106 1/4’’ 5,3 16 1x1530
SPF 175 2 1/2’’ 1680 762 224 139,7 121 1/4’’ 9,0 16 1x2030
SPF 200 3’’ 2400 1030 224 139,7 131 1/4’’ 10,8 12 1x3030 B
SPF 240 3’’ 3600 1062 255 168,3 136 1/4’’ 16,2 12 1x3050 E

36
 SPF filter cartridges

High pressure process filter cartridges can be made in 4

different versions:
- sintered inox,
- microfilter paper,
- active carbon,
- sterile.

Sterile filter Industrial filter cartridge

cartridge Max. oper. Max. oper.
Flow rate
pressure temperature Filter’s housing
[Nm3/h]
SPFs SPFn SPFi SPFP [bar] [°C]

0310-SPFs 0310-SPFn 0310-SPFi 0310-SPFP 75 16 150 SPF 005

0410-SPFs 0410-SPFn 0410-SPFi 0410-SPFP 105 16 150 SPF 007
0420-SPFs 0420-SPFn 0420-SPFi 0420-SPFP 150 16 150 SPF 010
0520-SPFs 0520-SPFn 0520-SPFi 0520-SPFP 225 16 150 SPF 018
0525-SPFs 0525-SPFn 0525-SPFi 0525-SPFP 315 16 150 SPF 030
0725-SPFs 0725-SPFn 0725-SPFi 0725-SPFP 420 16 150 SPF 047
0730-SPFs 0730-SPFn 0730-SPFi 0730-SPFP 600 16 150 SPF 070
1030-SPFs 1030-SPFn 1030-SPFi 1030-SPFP 900 16 150 SPF 094
1530-SPFs 1530-SPFn 1530-SPFi 1530-SPFP 1260 10 150 SPF 150
2030-SPFs 2030-SPFn 2030-SPFi 2030-SPFP 1680 10 150 SPF 175
3030-SPFs 3030-SPFn 3030-SPFi 3030-SPFP 2400 10 150 SPF 200
3050-SPFs 3050-SPFn 3050-SPFi 3050-SPFP 3600 10 150 SPF 240
SPFs SPFn SPFi SPFP
0,01 μm 20 μm 25 μm 0,01 μm solid particle size purification: down to
quality class - solids (ISO 8573-1)
quality class - oils (ISO 8573-1)
30 30 30 120 pressure drop - new element [mbar / psi]
600 600 600 600 change filter cartridge at pressure drop [mbar / psi]
borosilicate microfibres sintered INOX filter material
up to 150°C up to 150°C up to 150°C up to 120°C (65°C*) operating temperature range
up to 200°C up to 200°C up to 200°C short duration (max. 15 min) temperature limit

* For silicone free binding materials!

www.omega-air.si 37
 WOS - water - oil sepatators

Water-oil separators - WOS series

Local environmental laws and regulations state that conden-

sate drained from compressed air systems cannot be returned
to the sewage system due to the content of compressor
lubricating oil.

WOS is one of the most effective and economical water oil

separators. Multi-stage separation process using oleophilic
filters and activated carbon, ensures exceptional performance
and trouble free operation.

WOS series covers all compressor capacities up to 35 m3/min.

38
 WOS

Electronic detection of clogged

cartridge (option)
Benefits
• no complex sizing required,
• simple to install,
• works with any type od condensate drain,
• can handle and separate any type of oil,
• oil residue value is less than 10 ppm,
• easy to maintain,
• no condensate settling tank is required (therefore there is no
bacteria build-up),
• small compact design,
• test valve and test set included for sampling purposes.

INLET
» condensate (oil, water)
» air AIR OUTLET

DEPRESSURIZE CHAMBER
nd
2 stage WITH AIR FILTER
chamber

1st stage chamber

CLEAN WATER
OUTLET
residual oil
» condensate
content <10ppm
(oil, water)

ACTIVE CARBON OIL FILTER

FILTER CARTRIDGE CARTRIDGE
- final oil (polypropilene
elimination fibres)

Separator model
WOS-4 WOS-8 WOS-20 WOS-35
Max. capacity of compressed air [m3/h] / [m3/min] 240 / 4 480 / 8 1200 / 20 2100 / 35
Max. oil adsorbtion [Ltr] 3 10 15 25
C

Inlet connections [inch] 1 2 2 4

Outlet connections [inch] 1 1 1 1
Dimensions A×B×C [mm] 407×185×404 650×250×650 800×350×1000 1100×330×1150
A B

www.omega-air.si 39
 Filter cartridges

DOMNICK HUNTER
Size PF AO AA ACS
009 DHPF 009/P DHAO 009/M DHAA 009/S DHACS 009/A
017 DHPF 017/P DHAO 017/M DHAA 017/S DHACS 017/A
030 DHPF 030/P DHAO 030/M DHAA 030/S DHACS 030/A
058 DHPF 058/P DHAO 058/M DHAA 058/S DHACS 058/A
145 DHPF 145/P DHAO 145/M DHAA 145/S DHACS 145/A
220 DHPF 220/P DHAO 220/M DHAA 220/S DHACS 220/A
330 DHPF 330/P DHAO 330/M DHAA 330/S DHACS 330/A
430 DHPF 430/P DHAO 430/M DHAA 430/S DHACS 430/A
620 DHPF 620/P DHAO 620/M DHAA 620/S DHACS 620/A

ZANDER
Size V Y X A
1050 ZV 06050/P ZY 06050/M ZX 06050/S ZA 06050/A
1070 ZV 07050/P ZY 07050/M ZX 07050/S ZA 07050/A
1140 ZV 14050/P ZY 14050/M ZX 14050/S ZA 14050/A
2010 ZV 12075/P ZY 12075/M ZX 12075/S ZA 12075/A
2020 ZV 22075/P ZY 22075/M ZX 22075/S ZA 22075/A
2030 ZV 32075/P ZY 32075/M ZX 32075/S ZA 32075/A
2050 ZV 50075/P ZY 50075/M ZX 50075/S ZA 50075/A
3050 ZV 51090/P ZY 51090/M ZX 51090/S ZA 51090/A
3075 ZV 76090/P ZY 76090/M ZX 76090/S ZA 76090/A
5075 ZV 75140/P ZY 75140/M ZX 75140/S ZA 75140/A

HIROSS
Size Q P S C
004 HQ 004/P HP 004/M HS 004/S HC 004 /A
007 HQ 007/P HP 007/M HS 007/S HC 007/A
015 HQ 015/P HP 015/M HS 015/S HC 015/A
024 HQ 024/P HP 024/M HS 024/S HC 024/A
035 HQ 035/P HP 035/M HS 035/S HC 035/A
060 HQ 060/P HP 060/M HS 060/S HC 060/A
090 HQ 090/P HP 090/M HS 090/S HC 090/A
120 HQ 120/P HP 120/M HS 120/S HC 120/A
150 HQ 150/P HP 150/M HS 150/S HC 150/A
240 HQ 240/P HP 240/M HS 240/S HC 240/A

OMI
Size QF PF HF CF
0004 OQF /P OPF /M OHF /S OCF /A
0008 OQF /P OPF /M OHF /S OCF /A
0016 OQF /P OPF /M OHF /S OCF /A
0025 OQF /P OPF /M OHF /S OCF /A
0036 OQF /P OPF /M OHF /S OCF /A
0060 OQF /P OPF /M OHF /S OCF /A
0070 OQF /P OPF /M OHF /S OCF /A
0090 OQF /P OPF /M OHF /S OCF /A
0120 OQF /P OPF /M OHF /S OCF /A
0185 OQF /P OPF /M OHF /S OCF /A

40
 Filter cartridges

DONALDSON aluminium end caps

Size PE EF MF AK
02/05 UPE 0205/P UFF 0205/M UMF 0205/S UAK 0205/A
03/05 UPE 0305/P UFF 0305/M UMF 0305/S UAK 0305/A
03/10 UPE 0310/P UFF 0310/M UMF 0310/S UAK 0310/A
04/10 UPE 0410/P UFF 0410/M UMF 0410/S UAK 0410/A
04/20 UPE 0420/P UFF 0420/M UMF 0420/S UAK 0420/A
05/20 UPE 0520/P UFF 0520/M UMF 0520/S UAK 0520/A
05/25 UPE 0525/P UFF 0525/M UMF 0525/S UAK 0525/A
07/25 UPE 0725/P UFF 0725/M UMF 0725/S UAK 0725/A
07/30 UPE 0730/P UFF 0730/M UMF 0730/S UAK 0730/A
10/30 UPE 1030/P UFF 1030/M UMF 1030/S UAK 1030/A
15/30 UPE 1530/P UFF 1530/M UMF 1530/S UAK 1530/A
20/30 UPE 2030/P UFF 2030/M UMF 2030/S UAK 2030/A
30/30 UPE 3030/P UFF 3030/M UMF 3030/S UAK 3030/A
30/50 UPE 3050/P UFF 3050/M UMF 3050/S UAK 3050/A

DONALDSON plastic end caps

Size PE EF MF AK
02/05 UPE 0205/P UFF 0205/M UMF 0205/S UAK 0205/A
03/05 UPE 0305/P UFF 0305/M UMF 0305/S UAK 0305/A
03/10 UPE 0310/P UFF 0310/M UMF 0310/S UAK 0310/A
04/10 UPE 0410/P UFF 0410/M UMF 0410/S UAK 0410/A
04/20 UPE 0420/P UFF 0420/M UMF 0420/S UAK 0420/A
05/20 UPE 0520/P UFF 0520/M UMF 0520/S UAK 0520/A
05/25 UPE 0525/P UFF 0525/M UMF 0525/S UAK 0525/A
07/25 UPE 0725/P UFF 0725/M UMF 0725/S UAK 0725/A
07/30 UPE 0730/P UFF 0730/M UMF 0730/S UAK 0730/A
10/30 UPE 1030/P UFF 1030/M UMF 1030/S UAK 1030/A
15/30 UPE 1530/P UFF 1530/M UMF 1530/S UAK 1530/A
20/30 UPE 2030/P UFF 2030/M UMF 2030/S UAK 2030/A
30/30 UPE 3030/P UFF 3030/M UMF 3030/S UAK 3030/A
30/50 UPE 3050/P UFF 3050/M UMF 3050/S UAK 3050/A

www.omega-air.si 41
 Process & Sterile filter cartridges

DONALDSON P-SRF Size Cartridge model Article №

- sterile filtration of compressed air
03/10 P-SRF 03/10 224216
04/10 P-SRF 04/10 224220
04/20 P-SRF 04/20 224224
05/20 P-SRF 05/20 224232
05/25 P-SRF 05/25 224240
07/25 P-SRF 07/25 224248
05/30 P-SRF 05/30 224252
07/30 P-SRF 07/30 224256
10/30 P-SRF 10/30 224264
Filter media: borosilicate microfibres
Retention rate: 0,01 μm 15/30 P-SRF 15/30 224272
In&out core: stainless steel 1.4301 (304) 20/30 P-SRF 20/30 224280
Endcaps: stainless steel 1.4301 (304)
O-ring material: silicone 30/30 P-SRF 30/30 224288
Housing: P-EG, PG-EG, P-BE 30/50 P-SRF 30/50 224296

Filter cartridges for SRF - housings 80 series are also available!

DONALDSON P-BE Size Cartridge model Article №

- sterile air (tank venting)
03/10 P-BE 03/10 224816
04/10 P-BE 04/10 224820
04/20 P-BE 04/20 224824
05/20 P-BE 05/20 224832
05/25 P-BE 05/25 224840
07/25 P-BE 07/25 224848
05/30 P-BE 05/30 224852
07/30 P-BE 07/30 224856
10/30 P-BE 10/30 224864
Filter media: borosilicate microfibres
15/30 P-BE 15/30 224872
Retention rate: 0,01 μm
In&out core: stainless steel 1.4404 (316L) 20/30 P-BE 20/30 224880
Endcaps: stainless steel 30/30 P-BE 30/30 224888
O-ring material: silicone
30/50 P-BE 30/50 224896
Housing: P-BE
Filter cartridges for BE - housings 80 series are also available!

DONALDSON P-GS Size Cartridge model Article №

- process filtration of liquids, steam and gases
03/10 P-GS 03/10 220616-25
04/10 P-GS 04/10 220620-25
04/20 P-GS 04/20 220624-25
05/20 P-GS 05/20 220632-25
05/25 P-GS 05/25 220640-25
07/25 P-GS 07/25 220648-25
05/30 P-GS 05/30 220652-25
07/30 P-GS 07/30 220656-25
10/30 P-GS 10/30 220664-25
Filter media: sintered stainless steel 1.4404 (316L)
Retention rates: 1; 5; 25 μm 15/30 P-GS 15/30 220672-25
Endcaps: stainless steel 1.4301 (304) 20/30 P-GS 20/30 220680-25
O-ring material: EPDM 30/30 P-GS 30/30 220688-25
Housing: P-EG
30/50 P-GS 30/50 220696-25

Filter cartridges for D-SS - housings 80 series are also available!

42
 Process & Sterile filter cartridges

ZANDER ST-R - sterile filtration of compressed air Size Cartridge model

02/05 ST-R 02/05
03/05 ST-R 03/05
02/10 ST-R 02/10
03/10 ST-R 03/10
04/10 ST-R 04/10
04/20 ST-R 04/20
05/20 ST-R 05/20
05/25 ST-R 05/25
07/25 ST-R 07/25
07/30 ST-R 07/30
10/30 ST-R 10/30
15/30 ST-R 15/30
20/30 ST-R 20/30
30/30 ST-R 30/30
30/50 ST-R 30/50

ZANDER DS-R - process filtration Size Cartridge model

02/05 DS-R 02/05
03/05 DS-R 03/05
02/10 DS-R 02/10
03/10 DS-R 03/10
04/10 DS-R 04/10
04/20 DS-R 04/20
05/20 DS-R 05/20
05/25 DS-R 05/25
07/25 DS-R 07/25
07/30 DS-R 07/30
10/30 DS-R 10/30
15/30 DS-R 15/30
20/30 DS-R 20/30
30/30 DS-R 30/30
30/50 DS-R 30/50

www.omega-air.si 43
 Paint systems

ProPaintsystem

Professional units for high compressed

air quality requirements
6 different air qualities available:
1- compressed air for lower quality demands (down to 15 μm)
ProPaintsystem

2- compressed air for basic quality demands (down to 0,1 μm)

ProPaintsystem

3- compressed air for high quality demands (down to 0,01 μm)

4- tech. absolutely clean air (down to 0,1 μm, active carbon)
5- technical & breathable air
6- compressed air for highest demands (all in one unit)

Compressed air dryer

ProPaintsystem

Ultrapac 2000 -050

Quick coupling Nr.

Pressure regulator
active carbon SFA
Sterile filter with
Active carbon
Microfilter

Microfilter
S 0,01μm
M 0,1μm
CKL-PP

A
Connec- Air flow Dimensions (mm)
Model
tions
3
Nm /h A B C
PP-107 1/2’’ 155 270 135 276 • • 2
PP-110 1/2’’ 235 270 135 345 • • 2
PP-207 1/2’’ 78 380 135 276 • • • 2
PP-210 1/2’’ 120 380 135 345 • • • 2
PP-307 1/2’’ 78 490 135 276 • • • • 2
PP-310 1/2’’ 120 490 135 345 • • • • 2
C PP-407 1/2’’ 78 580 135 276 • • • • 4
PP-410 1/2’’ 120 580 135 345 • • • • 4
A PP-507 1/2’’ 78 612 135 370 • • • • 4
PP-510 1/2’’ 120 612 135 440 • • • • 4

• • • • •
B

PP-607 1/2’’ 78 1150 335 917 4

PP-610 1/2’’ 120 1150 335 917 • • • • • 4

PP-107 PP-207 PP-307

PP-110 PP-210 PP-310

PP-407 PP-507 PP-607

PP-410 PP-510 PP-610

44
 Petrol station equipment

BS 12-3,5

BS 12-1,3/1,7
BS Tower

PETRO-PACK

BS12-3,5 is ‘‘all in one’’ solution for petrol

stations, which includes compressor, air BS 12 -1,3/1,7 is ‘‘all in one’’ solution PETRO-PACK is compressor
connection and water connection in one for petrol stations, which includes designed for petrol station BS Tower is designed for compressed
- compact stainless steel housing. compressor, air connection and water applications. It is perfect solution for air and water maintenance of cars,
connection in one - compact stainless stations, where is no place for inside trucks and other vechicles.
It is an ideal solution for all new petrol steel housing. Two compressor installation. It is perfect for systems, where
stations with centralized air-water supply agregates are available. Compressor’s cover is made of compressed air and water systems
station. durable stainless steel sheet. Key are already provided. BS Tower is
lock protects compressor against made of durable stainless steel sheet,
Anti freezing heater assures operating even unauthorized intervention to inside which is perfect for variable weather
in temperatures under 0°C. It is equipped components. Sound protection conditions.
with pressure manometer, which indicates mounted on cover plates enables
the pressure in pressure vessel. installation nearby other buildings. All
connections are ground mounted.

BS 12
Size BS 12-3.5 PETRO-PACK BS TOWER
1,3 1,7

Max. operating pressure 12 bar 12 bar 12 bar 12 bar 0 - 12 bar

Flow capacity (ISO 1217) 350 Nl/min 130 Nl/min 170 Nl/min 350 Nl/min -

Pressure vessel capacity 25 ltr 15 ltr 15 ltr 25 ltr -

Electric motor power 1,8 kW 0,75 kW 1,5 kW 2,2 kW -

Power supply 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz 230 V / 50 Hz

Sound level (A) 1m 67 ± 2 dB 68 ± 2 dB 68 ± 2 dB 67 ± 2 dB -

Operating temperature -15 to +45°C -15 to +45°C -15 to +45°C -15 to +45°C -15 to +45°C

Electric heater power 10 W 10 W 10 W 10 W 10 W

Hose length 8m 8m 8m - 8m

www.omega-air.si 45
 Other products

Terrain compressors
Container compressed air units

Intake air filters

Oil separators

Pressure vessels
- Horizontal pressure vessels
- Vertical pressure vessels
up to 20.000 litres

46
Omega Air d.o.o. Ljubljana

Jure Robič

Construction

Gojmir Furlan

Technology

Mitja Rihtaršič

Electronics

www.omega-air.si 47
 Omega Air d.o.o. Ljubljana

Sandi Pečevnik

Filter cartridges

Marko Perovšek

Moulds construction

Moulds production
48
 Production

Mechanical department

Welding department

Plastic department

Filtration & equipment department

www.omega-air.si 49
 Omega Air d.o.o. Ljubljana
Company
ny
Compan

Service department

Logistics department

Sport club
50
 WHERE WE ARE?

Austria Austria

Italy Ljubljana ring

Exit-Ljubljana zahod
Nr. 35
Croatia

Exit Nr. 35
Europe,
Slovenia
Ljubljana
OMEGA AIR d.o.o. Ljubljana
LJUBLJANA Cesta Dolomitskega odreda 10
SI-1000, Ljubljana, Slovenia

GPS coordinates:
N: 46° 2’ 27.13’’
E: 14° 27’ 59.46’’

CUSTOMISED PRODUCTS
A large part of our manufacturing capacity is suited for customized products. We take part in the developing of the products together with our customers.
If you have a project in our range of products and need a co-operating partner do not hesitate to contact us.

GENERAL TERMS OF SALES

General conditions: Exclusively valid “The general sales conditions” of company Omega Air d.o.o. Ljubljana.
Terms of delivery: Incoterms EXW Ljubljana, Slovenia, packing included.
Terms of payment: Payment in advance if not otherwise agreed. Currency is EUR.
Warranty: One year from date of delivery. Warranty valids only if the product is used in accordance with its instruction manual.
Other costs such as labour costs are not included.
Changes: We reserve the right for typing errors and right to change the prices, conditions and technical specifications of the
products without previous announcement.
Packing and packing waste: The customer in the recipient country is responsible for the recycling of packaging and disposal of waste electrical
equipment in accordance with Directive 94/62/EC – Packing and Packing Waste and Directive 2002/96/EC Waste
Electrical and Electronic Equipment (WEEE).
Right of ownership: Delivered products remain in our possession until full payment has been settled.

The above mentioned sales terms and conditions are only for information. All other details are defined in writen agreement between contract parties.

www.omega-air.si 51
Concerning all furnished data, we reserve the right to make alterations to the constructive design, dimensions
and technical specifications!

OMEGA AIR d. o. o. Ljubljana

Cesta Dolomitskega odreda 10
1000 Ljubljana, Slovenia
tel: +386 (0)1 200 68 00
fax: +386 (0)1 200 68 50
e-mail: [email protected]
www.omega-air.si