Product data sheet
Characteristics
BMEH582040
redundant HSBY processor module M580 Level 2 - Remote
Range of product
Modicon M580
Product or component
type
Redundant processor module
Supply
Internal power supply via rack
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Main
Complementary
Number of racks
Application specific I/O
Accurate time stamping
Counter
Serial link
Motion control
HART
SSI encoder
Checks
Process control
Control channels
Programmable loops
Integrated connection type
1 Ethernet HSBY port
USB type mini B
2 Ethernet TCP/IP device network
1 Ethernet TCP/IP service port
Number of remote I/O station
8 - 2 rack(s) per X80 remote drop
Number of distributed equipment
64
Communication module processor
8 AS-Interface module
2 Ethernet communication module
Communication service
DIO scanner
RIO scanner
Memory description
Integrated RAM 768 kB data
Integrated RAM 8 MB program
Integrated RAM 10 kB system memory
Expandable flash 4 GB data storage
Application structure
1 cyclic/periodic master task
1 periodic fast task
Number of instructions per ms
10 Kinst/ms 100 % Boolean
7.5 Kinst/ms 65 % Boolean + 35 % fixed arithmetic
Current consumption
270 mA 24 V DC
MTBF reliability
600000 H
Marking
CE
Feb 8, 2016
Status LED
1 LED green Hot standby link status (Hsby Diag)
1 LED green I/O values overrided by user (FORCED IO)
1 LED green processor acting as Standby (STBY)
1 LED green processor acting as Primary (PRIM)
1 LED green processor ID set to B (B)
1 LED green processor ID set to A (A)
1 LED green peer processor running (REMOTE RUN)
1 LED green/red Eth NS (Ethernet network status)
1 LED green/red ETH MS (Ethernet port configuration status)
1 LED red memory card or CPU flash fault (BACKUP)
1 LED green download in progress (DL)
1 LED red I/O module fault (I/O)
1 LED red processor or system fault (ERR)
1 LED green processor running (RUN)
Product weight
0.849 kg
Environment
Ambient air temperature for operation
0...60 C
Ambient air temperature for storage
-40...85 C
Operating altitude
0...2000 m
Relative humidity
5...95 %
IP degree of protection
IP20
Standards
CSA C22.2 No 142
EN/IEC 61131-2
UL 508
LWD 2006/95/EC
EMC 2004/108/EC
CSA C22.2 No 213 Class I Division 2
EN/IEC 60079-0
EN/IEC 60079-31
EN/IEC 60079-15
Product certifications
GOST
RCM
WEEE directive 2002/96/EC
Merchant Navy
EAC
REACH directive 1907/2006/EC
RoHS directive 2011/65/EU
ATEX II 3 Gas & Dust zone 2/22
Product data sheet
Dimensions Drawings
BMEH582040
CPU MODULE ONLY
Modules Mounted on Racks
a:
b:
c:
additional space below the rack to accommodate the height of the CPU. For an X Bus rack, the value is 30.9mm (1.217in.); for an
Ethernet rack, the value is 29.49mm (1.161in.).
the height of the rack. For an X Bus rack, the height is 103.7mm (4.083in.); for an Ethernet rack, the height is 105.11mm (4.138in.).
the height of the main local rack, 134.6mm (5.299in.)
Modules and Cables Mounted in an Enclosure
a:
b:
c:
d:
e:
enclosure depth: 135mm (5.315in.)
wiring + module depth: >146mm (5.748in.)
wiring + module + DIN rail depth: >156mm (6.142in.)
rack height: for an X Bus rack 103.7mm (4.083in.); for an Ethernet rack, 105.11mm (4.138in.)
module height: 134.6mm (5.299in.)
