Smart bus communication protocol
Define of system communication command
Leading
code
Length
of data
packag
e
Original
subnet ID
Original
device ID
Original
device
type
Operate
code
Targeted
subnet ID
Targeted
device ID
content
CRC
H
high
er then
8
CRC
L
lower
then 8
16bit
8Bit
8Bit
8Bit
16Bit
16Bit
8Bit
8Bit
0-N
8Bit
8Bit
0xAAA
A
13-128
0-254
0-254
0-0FFFF
0-0xFFF
F
0-254
0-254
0Nbyte
10
Pulse format as following
Leading code
Leading code is starting symbol of data package and fixed format is 0xAAAAit will start to receive the whole
package when the receiver get the fix format from the data and take a data as length of data package.
1 Length of data package
11-78. content will be nil when length of data package are equal to 11. data content= length of data package-11
2 Original subnet ID
From 0-254
3 Original device ID
From 0-254
4 Original device type
From 0-65535
6Operate code
From 0-65535, define all kind of operate command and info in the system.
7Targeted subnet ID
Two : one From 0-254 and another is 255, 0-254is real ID of the subnet and 255 is full network broadcast ID.
Assigned data should sent to right subnet via gateway, when subnet ID is 255, the assigned data should sent to
all device in the subnet.
8Targeted device ID
Two : one From 0-254 and another is 255, 0-254 is real ID of the device and 255 is broadcast ID. Assigned
data should be sent to right device , when ID is 255, the assigned data should sent to all device.
9. Content
Optional item.
10. CRC H-CRC L
CRC verification result from data package length to data content
What we need to care when use our device.
1 Original subnet ID and Original device ID. It means ID of the controller, device ID overlapping is not
allowed.
2 Operate code. For example: scene open: 0x0002, single control is 0x0031, switch series is 0x001a
3 Targeted subnet ID and Targeted device ID.
4 Data content
This is related to operate code.
a. scene open(operate code is 0x0002), two bytes: one is for area No and second is scene No. returning
command of scene open: operate code is 0x0003, targeted ID is 0xFF,0xFF(return as broadcast),
content have two byte: one is for area No and second is scene No.
b. single control( operate code is 0x0031), four byte: first byte for channel No, second byte for intensity,
the third one for high time and the fourth for low time. The two latter means that time (second)from
present intensity to targeted intensity.
Returning command of single control: operate code is 0x0032, targeted ID is 0xFF,0xFF(return as
broadcast), content have three byte: one is for channel No and second is outcome(0xF8success ,
0xF5fail), the third is channel intensity.
c. Switch series(0x001a), content have three byte: one is for area No and second is series No.
Returning command of switch series: operate code is 0x001B, targeted ID is 0xFF,0xFF(return as
broadcast), content have three byte: one is for area No and second is series.
d. status reading of present targeted lamp: operate code is 0x0033, NO CONTENT ( CAN BE
USEDTO READ LAMP STATUS)
returning command: operate code is 0x0034,
first byte of additional data means total channel No
the latter is intensity of each channel.
Take MD1210 as a example:
Subnet ID: 1, device ID: 2, subnet of controller: 1 device ID of controller: 100, original device type is 0x0000,
want to control first scene of first area of MD1210, FORMAT AS FOLLOWING:
0xAA 0xAA 0x0d 0x01 0x64 0x00 0x00 0x00 0x02
Leading code
Original device
ID
0x01 0x02 0x01 0x01 0x5F
Area 1, scene 1
Length: 13 bytes
Operate code
Original
ID:0x01
ID:0x64
device
device
Targeted subnet ID 1
targeted device ID2
RS485 commutation way
9600bps11bit: initial , 8 data bit, efficacy bit, stop bit
CRC programming written by C language
unchar Check_crc(unchar *ptr, unchar len)
{
unint crc;
unchar dat;
crc=0;
while(len--!=0)
{
dat=crc>>8;
/* */
crc<<=8;
/* */
crc^=CRC_TAB[dat^*ptr]; /* */
ptr++;
}
dat=crc;
if((*ptr==(crc>>8))&&(*(ptr+1)==dat))
return(TRUE);
else
return(FALSE);
}
void Pack_crc(unchar *ptr, unchar len)
{
unint crc;
unchar dat;
crc=0;
while(len--!=0)
{
0x48
CRC
verification
code
dat=crc>>8;
crc<<=8;
crc^=CRC_TAB[dat^*ptr];
ptr++;
/* */
/* */
/* */
}
*ptr=crc>>8;
ptr++;
*ptr=crc;
}
unsigned int CRC_TAB[]={
/* CRC tab */
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
};
UDP communication protocol
Smart bus Ethernet communication protocol is based on winsock to communicate, following take ddelphi as an
example to explain socket.
1, initialed Socket: port: 6000
2, sending data package: using sendto function to send
3, receiving data package: using recvfrom function to receive
maraySendUDPBuf : datagroup of sending data
maraySendUDPBuf[0]:=mbytIPPart1;{eg. IP: 192.168.18.5, so mbytIPPart1=192}
maraySendUDPBuf[1]:=mbytIPPart2;( instead of the second local IP, here is 168)
maraySendUDPBuf[2]:=mbytIPPart3; (instead of the third local IP, here is 18 )
maraySendUDPBuf[3]:=mbytIPPart4; (instead of the fourth local IP, here is 5 )
maraySendUDPBuf[4]:=$48;{H}
maraySendUDPBuf[5]:=$44;{D}
maraySendUDPBuf[6]:=$4C;{L}
maraySendUDPBuf[7]:=$4D;{M}
maraySendUDPBuf[8]:=$49;{I}
maraySendUDPBuf[9]:=$52;{R}
maraySendUDPBuf[10]:=$41;{A}
maraySendUDPBuf[11]:=$43;{C}
maraySendUDPBuf[12]:=$4C;{L}
maraySendUDPBuf[13]:=$45;{E}
maraySendUDPBuf[14]=$AA;
maraySendUDPBuf[15]=$AA;
maraySendUDPBuf[16]=$0F;
maraySendUDPBuf[17]=$01;
maraySendUDPBuf[18]=$FA;
maraySendUDPBuf[19]=$FF;
maraySendUDPBuf[20]=$FE;
maraySendUDPBuf[21]=$00;
maraySendUDPBuf[22]=$31;
maraySendUDPBuf[23]=$01;
maraySendUDPBuf[24]=$44
maraySendUDPBuf[25]=$01;
maraySendUDPBuf[26]=$46;
maraySendUDPBuf[27]=$00
maraySendUDPBuf[28]=$00;
maraySendUDPBuf[29]= $1D;
maraySendUDPBuf[30]= $A3;
{ leading code }
{ leading code}
data package length
{original subnet ID}
original device ID
{original device type: higher then 8 }
{ original device type: lower then 8 }
{ operate code: higher then 8 }
{ operate code: lower then 8}
{subnet ID of targeted device }
{ device ID of targeted device }
{ additional, channel No }
{ additional, intensity }
{ additional, channel running time, higher then 8 }
{ additional, channel running time, lower then 8 }
{CRC, higher then 8 }
{CRC, lower then 8}
and then we can
sendto (moSocket,maraySendUDPBuf,intUDPBufLen,0,moSockAddrIn,sizeof(moSockAddrIn));
send
out data package of maraySendUDPBuf.
code for CRC verificationfor delphi
1CRC table
{---------------------CRC table------------------------}
constCRCTab:array[0..255] of word=(
$0000, $1021, $2042, $3063, $4084, $50a5, $60c6, $70e7,
$8108, $9129, $a14a, $b16b, $c18c, $d1ad, $e1ce, $f1ef,
$1231, $0210, $3273, $2252, $52b5, $4294, $72f7, $62d6,
$9339, $8318, $b37b, $a35a, $d3bd, $c39c, $f3ff, $e3de,
$2462, $3443, $0420, $1401, $64e6, $74c7, $44a4, $5485,
$a56a, $b54b, $8528, $9509, $e5ee, $f5cf, $c5ac, $d58d,
$3653, $2672, $1611, $0630, $76d7, $66f6, $5695, $46b4,
$b75b, $a77a, $9719, $8738, $f7df, $e7fe, $d79d, $c7bc,
$48c4, $58e5, $6886, $78a7, $0840, $1861, $2802, $3823,
$c9cc, $d9ed, $e98e, $f9af, $8948, $9969, $a90a, $b92b,
$5af5, $4ad4, $7ab7, $6a96, $1a71, $0a50, $3a33, $2a12,
$dbfd, $cbdc, $fbbf, $eb9e, $9b79, $8b58, $bb3b, $ab1a,
$6ca6, $7c87, $4ce4, $5cc5, $2c22, $3c03, $0c60, $1c41,
$edae, $fd8f, $cdec, $ddcd, $ad2a, $bd0b, $8d68, $9d49,
$7e97, $6eb6, $5ed5, $4ef4, $3e13, $2e32, $1e51, $0e70,
$ff9f, $efbe, $dfdd, $cffc, $bf1b, $af3a, $9f59, $8f78,
$9188, $81a9, $b1ca, $a1eb, $d10c, $c12d, $f14e, $e16f,
$1080, $00a1, $30c2, $20e3, $5004, $4025, $7046, $6067,
$83b9, $9398, $a3fb, $b3da, $c33d, $d31c, $e37f, $f35e,
$02b1, $1290, $22f3, $32d2, $4235, $5214, $6277, $7256,
$b5ea, $a5cb, $95a8, $8589, $f56e, $e54f, $d52c, $c50d,
$34e2, $24c3, $14a0, $0481, $7466, $6447, $5424, $4405,
$a7db, $b7fa, $8799, $97b8, $e75f, $f77e, $c71d, $d73c,
$26d3, $36f2, $0691, $16b0, $6657, $7676, $4615, $5634,
$d94c, $c96d, $f90e, $e92f, $99c8, $89e9, $b98a, $a9ab,
$5844, $4865, $7806, $6827, $18c0, $08e1, $3882, $28a3,
$cb7d, $db5c, $eb3f, $fb1e, $8bf9, $9bd8, $abbb, $bb9a,
$4a75, $5a54, $6a37, $7a16, $0af1, $1ad0, $2ab3, $3a92,
$fd2e, $ed0f, $dd6c, $cd4d, $bdaa, $ad8b, $9de8, $8dc9,
$7c26, $6c07, $5c64, $4c45, $3ca2, $2c83, $1ce0, $0cc1,
$ef1f, $ff3e, $cf5d, $df7c, $af9b, $bfba, $8fd9, $9ff8,
$6e17, $7e36, $4e55, $5e74, $2e93, $3eb2, $0ed1, $1ef0);
2Get two value of CRC: higher then 8 and lower then 8, and distribute to mbytCRCHighData and
mbytCRCLowData
Parameter 1ArayPtrBuf is from data length of data package (not including 0xAA,0xAA
eg. Data package is (17017013, 1, 250, 255, 254, 0, 2, 1, 2, 1, 1, 0, 0)170 means Hex 0xAA, so
parameter 1 ArayPtrBuf is (13, 1, 250, 255, 254, 0, 2, 1, 2, 1, 1, 0, 0) (not including 0xAA,0xAA
parameter 2intBufLen deduct 2 byte from this data package( because CRC take 2 byte)
eg. Length of above data package is 13 byte , so intBufLen
=13-2=11
finally, it can get CRC verification code from above two parameters that input following hdlPackCRC
function.
procedure hdlPackCRC(arayPtrBuf:array of byte;intBufLen:integer);
var
wdCRC:word;
wdPtrCount:word;
bytDat:byte;
begin
try
wdCRC:=0;
wdPtrCount:=0;
while intBufLen<>0 do
begin
bytdat:=wdCRC shr 8;
wdCRC:=wdCRC shl 8;
wdCRC:=wdCRC xor constCRCTab[bytdat xor arayPtrBuf[wdPtrCount]];
wdPtrCount:=wdPtrCount+1;
intBufLen:=intBufLen-1;
end;
arayPtrBuf[wdPtrCount]:=wdCRC shr 8;
mbytCRCHighData:=arayPtrBuf[wdPtrCount];
wdPtrCount:=wdPtrCount+1;
arayPtrBuf[wdPtrCount]:=wdCRC and $FF;
mbytCRCLowData:=arayPtrBuf[wdPtrCount];
except
on ex:Exception do
begin
MessageDlg(ex.Message+'(hdlPackCRC)',mtError,[mbOK],0);
end;
end;
end;
3Use hdlCheckCRC function for CRC verification when receiving data package,
HdlCheckCRC function
Parameter 1: arayPtrBuf also not include two oxAA data package
eg. Data package (17017011, 1, 241, 255, 254, 0, 51, 1, 59, 88, 44)
so arayPtrBuf is (11, 1, 241, 255, 254, 0, 51, 1, 59, 88, 44), exclude 170
parameter 2: intBufLen deduct 2 byte from this data package( because CRC take 2 byte)
eg. Length of above data package is 11 byte , so intBufLen =11-2=9
finally, it can be verified from above two parameters that input following hdlPackCRC function.
function hdlCheckCRC(arayPtrBuf:array of byte;intBufLen:integer):boolean;
var
wdCRC:word;
// dual type variable
bytDat:byte;
bytPtrCount:byte;
blnIsRight:boolean;
// true or false
begin
wdCRC:=0;
bytPtrCount:=0;
try
while intBufLen<>0 do
begin
bytDat:=wdCRC shr 8;
wdCRC:=wdCRC shl 8;
wdCRC:=wdCRC xor constCRCTab[bytDat xor arayPtrBuf[bytPtrCount]];
bytPtrCount:=bytPtrCount+1;
intBufLen:=intBufLen-1;
end;
if(arayPtrBuf[bytPtrCount]=(wdCRC shr 8)) and (arayPtrBuf[bytPtrCount+1]=wdCRC and $ff) then
begin
blnIsRight:=true;
end
else
begin
blnIsRight:=false;
end;
except
on ex:Exception do
begin
blnIsRight:=false;
MessageDlg(ex.Message+'(hdlCheckCRC)',mtError,[mbOK],0);
end;
end;
Result:=blnIsRight;
end;
Command on search on-line device(example)
Subnet ID of targeted device: subnet ID from 0 to 255
Device ID of targeted device: device ID255, broadcast
Operate code :0x000E
Example 1: assigned subnet ID :1 search on-line device, device ID:FF
AA AA 0B 01 FA FF FE 00 0E 01 255 0D 3F
Totally 14 byte if send data package via Ethernet.
{take local IP for exampleeg.IP : 192.168.18.5, so mbytIPPart1=192}
maraySendUDPBuf[0]:=mbytIPPart1;
maraySendUDPBuf[1]:=mbytIPPart2; ( instead of the second local IP, here is 168)
maraySendUDPBuf[2]:=mbytIPPart3; ( instead of the third local IP, here is 18)
maraySendUDPBuf[3]:=mbytIPPart4; ( instead of the fourth local IP, here is 5)
maraySendUDPBuf[4]:=$48;{H}
maraySendUDPBuf[5]:=$44;{D}
maraySendUDPBuf[6]:=$4C;{L}
maraySendUDPBuf[7]:=$4D;{M}
maraySendUDPBuf[8]:=$49;{I}
maraySendUDPBuf[9]:=$52;{R}
maraySendUDPBuf[10]:=$41;{A}
maraySendUDPBuf[11]:=$43;{C}
maraySendUDPBuf[12]:=$4C;{L}
maraySendUDPBuf[13]:=$45;{E}
example 2 broadcast ID :FF search online, device ID:FF
AA AA 0B 01 FA FF FE 00 0E 01 255 3D F1
device type table
defDeviceType
DeviceType
Model
DescribeInChn
DescribeInEng
1 HDL-MD0610
6 channels 10A dimmable scene controller
2 HDL-MD1210A
12 channels 10A dimmable scene controller (with
load status feedback)
3 HDL-MD2405A
24 channels 5A dimmable scene controller (with load
status feedback)
4 HDL-MD0620
6 channels 20A dimmable scene controller
5 HDL-MD1210
12 channels 10A dimmable scene controller
6 HDL-MD2405
24 channels 5A dimmable scene controller
7 HDL-MDH1210A
12 channels 10A dimmable scene controller(with
load status feedback)
defDeviceType
DeviceType
Model
8 HDL-MD0620A
DescribeInChn
DescribeInEng
6 channels 20A dimmable scene controller(with load
status feedback)
9 HDL-MDH0610
6 channels 10A dimmable scene controller(with load
status feedback)
11 HDL-MR1220
12 channels 20A relay
12 HDL-MR2420
24 channels 20A relay
13 HDL-MC48IP
48 channels scene controller bus (up to 8 unit 6
channels power modules in which is
extendible,standard t-shaped tunnel installation
with Ethernet channels)
14 HDL-MC48
48 channels scene controller bus (up to 8 unit 6
channel power modules in which is
extendible,standard t-shaped tunnel installation)
15 HDL-MD0602
6 channels 2A dimmable scene controller
16 HDL-MC48IPDMX
48 channels scene controller bus (standard
t-shaped tunnel installation with Ethernet
channels,with DMX)
17 HDL-MRDA06
6 channels,0-10V output,dimmable scene controller
of fluorescent lamp
18 HDL-MC48DMX
48 channels scene controller bus (standard
t-shaped tunnel installation with DMX)
19 HDL-MR1210
12 channels 10A relay
20 HDL-MC240IP
240 channels show controller
21 HDL-MC512IP
512 channels show controller
22 HDL-MR1205
12 channels 5A relay
23 HDL-MR0810
8 channels 10A relay
25 HDL-MD0403
4 channels 3A dimmable scene controller
26 HDL-MDH2405
24 channels 5A dimmable scene controller
27 HDL-MDH0620
6 channels 20A dimmable scene controller
28 HDL-MD0304
3 channels 4A dimmable scene controller
40 HDL-MC48DALI
48 channels DALI scene controller
50 HDL-MP8RM
8 keys multi-functional panel (with infrared
control)
51 HDL-MP8M
8 keys multi-functional panel
52 HDL-MP4RM
4 keys multi-functional panel (with infrared
control)
53 HDL-MP4M
4 keys multi-functional panel
54 HDL-MP6R
6 keys scene panel (with infrared control, scene
intensity temporary adjustable)
defDeviceType
DeviceType
Model
55 HDL-MP6
DescribeInChn
DescribeInEng
6 keys scene panel (without infrared control, with
scene intensity temporary adjustable)
56 HDL-MP2R
2 keys scene panel (with infrared control, scene
intensity temporary adjustable)
57 HDL-MP2
2 keys scene panel (without infrared control, with
scene intensity temporary adjustable)
60 HDL-MP8RM
8 keys multi-functional panel (with infrared
control)
61 HDL-MP4RM
4 keys multi-functional panel (with infrared
control)
62 HDL-MWL16
Wireless receiver
63 HDL-MP4RM
4 keys multi-functional panel (with infrared
control)
70 HDL-MSR04
Room partition
80 HDL-MS01R
Motion sensor
81 HDL-MS01L
Linear sensor
90 HDL-MS01R
Motion sensor
91 HDL-MS01L
Linear sensor
92 HDL-MS12
12 channels sensor
93 HDL-MS04
Sensor Input Module
95 HDL-MHS01
Roof-Mounting Infrared Dual-Technology Motion
Sensor
96 HDL-MPE01
Ambient Intensity Monitor
97 HDL-MHS02
Wide Field Infrared Dual-Technology Motion Sensor
98 HDL-MHS02
Wide Field Infrared Dual-Technology Motion Sensor
99 HDL-MHS01
Roof-Mounting Infrared Dual-Technology Motion
Sensor
100 HDL-MT12IP
12 channels timer (standard t-shaped tunnel
installation with Ethernet port)
101 HDL-MT12IP
12 channels timer (standard t-shaped tunnel
installation with Ethernet port)
102 HDL-MT01
1 channels Event timer
103 HDL-MT12IP
12 channels timer (standard t-shaped tunnel
installation with Ethernet port)
128 HDL-MBUS-RS232
HDL-BUS/RS232 converter
150 HDL-MR1220A
12 channels 20A relay
151 HDL-MR2420A
24 channels 20A relay/ without status feedback
152 HDL-MR0610
6 channels 10A relay
153 HDL-MR0416A
4 channels 16A relay
defDeviceType
DeviceType
Model
DescribeInChn
DescribeInEng
236 HDL-MBUS01IP
1 port switchboard
237 HDL-MBUS04IP
4 port switchboard
238 HDL-MBUS08IP
8 port switchboard
300 HDL-MIR01
Infrared signal emission,remote receiving module
400 HDL-MAIR01
Air-Condition controller
500 HDL-MTS7000
7" Ture Color Touch Screen
700 HDL-MW02
Curtain controller
701 HDL-MW02
Curtain controller
800 HDL-MDMXI08
8 channels DMX input module
850 HDL-MC96IPDMX
96 channels scene controller bus (standard
t-shaped tunnelinstallation with DMX)
900 HDL-MPM01
Digital electric meter
1000 HDL-MBUS-EIB
EIB/HDL-BUS converter
1005 HDL-MBUS-SAMSUNG
SAMSUNG touch screen convert to HDL-BUS
65534
PC
