Scribd
Upload
502 views2 pages

Tty Cable For s5 PLC - Siemens - Plcforum - Uz.ua

The document discusses communication problems between an S5-115U PLC and a PC. It describes trying to use an RS232-TTY converter and RS232-USB converter but neither worked. Suggestions are provided that USB communication may only work with the latest version of STEP5 software running on Windows XP due to the DOS emulator used in older versions.

Uploaded by

Hafidz Albirru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
502 views2 pages

Tty Cable For s5 PLC - Siemens - Plcforum - Uz.ua

The document discusses communication problems between an S5-115U PLC and a PC. It describes trying to use an RS232-TTY converter and RS232-USB converter but neither worked. Suggestions are provided that USB communication may only work with the latest version of STEP5 software running on Windows XP due to the DOS emulator used in older versions.

Uploaded by

Hafidz Albirru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

plcforum.uz.

ua :: View topic - S5 115 <-> PC communication problem

1 of 2

http://plcforum.uz.ua/viewtopic.php?f=1&t=3294&start=0&view=print

plcforum.uz.ua
http://plcforum.uz.ua/

S5 115 <-> PC communication problem


http://plcforum.uz.ua/viewtopic.php?f=1&t=3294

Author:

Page 1 of 1

kazzuro [ Mon Jul 03, 2006 11:29 am ]

Post subject: S5 115 <-> PC communication problem


Hello,
I have a RS232-TTY converter which works properly with S5-95. But my PC cannot
communicate throught this cable with S5-115U 943B. It is cable similar to this one:

Do you know other solutions for communiaction between PC and S5?


My other problem is that my interface cannot communicate with any PLC when I use
RS232-USB converter. Do you know why it doesnt work ?
Thanks!
Author:

Guest [ Mon Jul 03, 2006 1:32 pm ]

Post subject:
To use an USB-converter with a SIEMENS RS232C - TTY interface or other is not
functional because the signal which goes out the converter is not compatible with
the signal which goes in the rs232c-tty interface.
Author:

burich [ Sun Jul 09, 2006 4:54 am ]

Post subject: usb comunication with step5

11/12/2015 16:12

plcforum.uz.ua :: View topic - S5 115 <-> PC communication problem

2 of 2

http://plcforum.uz.ua/viewtopic.php?f=1&t=3294&start=0&view=print

hi ,
the problem for comunication usb - rs232 is :
1) which is the version of step5 and windows you have?
all the version for step 5 run in dos mode with emulator for windows, and you can
see the windows in the step5 but run in dos mode, ( i not test the last version step5
v7.23 for win XP ) but the other all run in dos mode with emulador for windows and
the dos software can not abble the usb port and no go on-line with the plc s5 .
You understand , the problem is the software must be can run in windows mode ,
the only software manager the usb port is windows and not dos !
You must try with the last version on step5 v 7.23 and windows xp sp1,
i not try , but you can make the test!
best regards, pichi burich
Author:

kazzuro [ Mon Jul 10, 2006 2:13 pm ]

Post subject:
Thanx burich
I use WinXP with SP2 and IBHSoftec's: S5/S7 for Windows.
Page 1 of 1

All times are UTC + 3 hours


Powered by phpBB Forum Software phpBB Group
http://www.phpbb.com/

11/12/2015 16:12

You might also like