In Shipbuilding Safety is
ALWAYS on the Line
Shipbuilders Depend on AMI for Approved Hot Work Fabrics
Meets or
Exceeds all Military and
Government Standards
US Made in Compliance with
Buy American Requirements
Certified
in
Third-Party
Compliance with NFPA 51B, 2009 Edition
Rated and Tested by FM Approvals
Printed with FM Rating
AMI Hot Work Fabrics Meet Highest Safety Standards
Controlling Fire Hazards in Shipyards Is Essential
Shipyard employees are exposed to a variety of workplace hazards and dangers posed by the generation of
sparks from welding, cutting and brazing in addition to molten metal, heat energy and light radiation from hot
work. Controlling all fire hazards found in the shipyard and ship building environment is an essential step towards
protecting workers from injury as well as minimizing the potential for property damage, business interruption,
legal liability. To reduce the risk update your hot work policies to comply with NFPA 51B (2009 Edition) and
insist on using independently certified FM Approved welding curtains, blankets and pads on all shipyard hot
work jobs
Government, Military and Industry Standards
MIL-C-24576A
Cloth, Silica Glass for Welding and Cutting Operations
MIL-C-20079H
Glass Cloth for Thermal Insulation Components
MIL I-24244B
Insulation Material with Special Corrosion, Chloride and Fluoride Requirements
AWS ANSI Z49
Safety in Welding, Cutting, and Allied Processes
USCG 164.009
Test for Incombustibility
NFPA 51B
2009 Edition Standard for Fire Prevention During Welding, Cutting, and Other Hot Work
NRC 1.36
Nuclear Regulatory Commission Standard
API 2009
Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries
The U.S. Navy specifies and
uses AMIs certified hot
work fabrics for welding
containment hot boxes for
major hull cuts and repairs.
AMIs welding blankets, pads
and curtains are continually
specified because they
withstand extreme conditions,
are water resistant, and
reusable.
Updated Standards Reference NFPA 51B (2009) and Call For Rated Hot Work Fabrics
There is an increased emphasis on updating hot work policies to include conformance to NFPA 51B (2009)
and require the use of FM Approved hot work fabrics with the proper ratings for the job. The updated NFPA 51B
2009 standard requires that welding blankets, curtains and pads be Listed or Approved (third-party certified)
to ANSI/FM 4950. These new industry standards ensure the proper use and specifications of these fabrics an
essential part of good safety management practices. AMI produces more ANSI/FM Approved fabrics than any
other company.
Ask AMI How to Select the Right FM Approved
Hot Work Fabric for Your Application
Pa
d
Cu
r
Bl
an
ta
in
ke
t
AMIs full range of FM Approved products are independently certified and rated as either Welding Curtains,
Welding Blankets or Welding Pads. These ratings are based on severity of use rather than just temperature and
enable safety professionals to quickly and accurately determine which level of fire protection is needed for a
specific hot work operation.
Best Use: Vertical, Light/
Moderate Exposure to
Sparks
Best Use: Horizontal,
Light/Moderate Exposure
to Sparks/Molten Metal
Best Use: Horizontal,
Severe Exposure to
Molten Metal
AMI Fabrics Used in Ship Building & Repair
Welding Cutting Brazing Hot Boxes Habitats Covers for Electrical Equipment and More
Ratings
Product Code
Curtain
Curtain
Curtain
Blanket
Blanket
Pad
Pad
GL2025-9383
AS1800G
SGL1700
SAS2400-1
SGLP3100
SGLV6001
AS3600
Nominal
Weight (Oz/Yd)
Thickness
(in)
Standard
Widths (in)
18 oz
18 oz
17 oz
29 oz
31 oz
75 oz
36 oz
.036
.026
.016
.047
.037
.115
.054
40, 60, 72
36, 60
60
36, 60
60
40, 60
36, 60
AMI hot work fabrics are economical, flexible, and are tough enough for outdoor use. To meet the ANSI/FM 4950
Standard, fabrics have undergone tests that replicate real world scenarios including fire and thermal, charring
embrittlement, and accelerated weathering.
Over One Million Yards to MIL-C-24576 Requirements
Only AMI has supplied over one million yards to the [Link]. Every yard must meet very specific requirements.
Because safety of personnel and property is so critical, industry requirements are equally as demanding.
AMI works hand-in-hand with the petrochemical and oil refining industry, the nuclear power industry and the
steelmaking industry in determining the hot work fabric needs to meet their equally demanding safety standards.
Call AMI and Ask!
We will conduct a site visit to demonstrate
how the rating system can be used to
improve the safety of your hot work
operations.
We lead the industry with 21 certified fabrics
and will provide sample hot work products
for trial use with specific applications.
We will supply industry references and
recommendations for critical hot work
operations.
Auburns Fabrics are
Certified to the Core
When safety is critical, there is no room for doubt on the
quality and integrity of the hot work fabrics used on the job.
Todays military, US. Government, industry and NRC standards
all call for certified FM Approved welding curtains,
blankets and pads to be used in
their facilities.
AMI prominently labels their
products down to the core. You
will always get certified products
that meet military, NRC and
industry standards.
The Package:
All AMIs certified products have the
FM Approval marking clearly labeled
on the exterior product packaging.
The Product:
The FM Approval certification and
performance category is also printed
directly on all AMI hot work fabrics to
assure the right product is being used
on the jobsite once the packaging is
removed.
AMI is a U.S. Manufacturer.
We are not just an importer. All of
our hot work textiles are independently
certified and manufactured in the U.S.
Ask for a Country of Origin Certificate every
time you order welding curtains, blankets and pads.
34 Walker Road | P.O. Box 220 | Mechanic Falls, Maine 04256
T: 1.800.264.6689 | sales@[Link]
[Link]
The Core:
AMI applies a FM Approval and
performance rating label on the inner
cardboard core of every roll of hot
work fabric making it easy to identify
and pull the right product from your
inventory.
The rules have changed! Scan the
QR code for a short fact-based video
on the hot work fabric requirements
for NFPA 51B compliance. Find out
what the FM Approval for hot work
protection means, how to identify FM
Approved welding curtains, blankets
& pads, and how to select the right
hot wok product for your application.
SHIP 4/13
