Resins Polyols and Aspartics
for Reaction with Polyisocyanates
Covestro Deutschland AG
Business Unit Coatings,
Adhesives and Specialties
D-51365 Leverkusen
Germany
www.coatings.covestro.com
[email protected]This information and our technical advice whether verbal, in writing or by ways of trial are given in good faith but without
warranty and are subject to change without notice. This also applies where proprietary rights of third parties are involved.
The information is provided by Covestro AG without assumption of any liability. Our advice does not release you from
the obligation to verify the information provided especially that contained in our safety data and technical information
sheets , to check for updates of any information provided by us and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you
on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products
are sold in accordance with the current version of our General Conditions of Sale and Delivery.
Edition: 2015 Order-No.: COV00072990 Printed in Germany
Desmophen Baycoll Acclaim Desmolac
02 Polyols and Aspartics
Polyols and Aspartics 03
Contents
0405
Our Mission: INVENTING FOR YOU
0607
Building blocks for supply security, efficiency and sustainability
08
Applications Highlights
09
Polyols The reaction partners
Our product portfolio
1011
Polyester solvent-free, linear, liquid
1011
Polyester solvent-free, linear, solid
1213
Polyester solvent-free, branched, liquid
1415
Polyester solventborne, branched
1617
Polyester solventborne, branched, fatty acid-modified
1819
Polyether diol
2021
Polyether triol
2223
Polycarbonate diol
2425
Aminofunctional resins, Aspatics for Coatings
2425
Non-functional resins
2627
Fast-lane access to polyurethane innovations
Desmophen Baycoll Acclaim Desmolac
04 Polyols and Aspartics
As your leading partner for polyurethane chemistry, we know you are
Flexible Packaging 05
competing in increasingly challenging environments: Your customers are
becoming more and more demanding in their expectations for quality, dura-
bility, sustainability and aesthetics of products. And they have more choices.
For you this means that cost pressure is rising while innovation cycles are
becoming faster and faster.
Helping you to turn this challenge into your competitive advantage is the goal
that drives our daily work. We call it: INVENTING FOR YOU. But what exactly
are the basic values underlying this promise? What principles enable us to
improve your productivity, drive sustainability, ensure reliability and co-create
future-proof businesses? First and foremost, we are curious. Because only if
we listen closely to you and ask the right questions, we can respond to your
individual needs with new, creative and unexpected solutions that make a real
difference to you. Thats why inventing for us always starts with thinking about
your unmet business challenges. It requires an indepth understanding of your
needs along the whole value chain. To make sure: What we invent stands the
test of time. Living up to this aspiration requires more than competencies it
calls for a corporate culture of being courageous. A culture that is defined and
INVENTING
VISIONS
FOR YOU
lived by dedicated people who cooperate to push the boundaries of invention
founded on knowledge and experience. Our courage permeates our entire
business from partnerships to business models. This is also reflected in our
colorful business philosophy. We appreciate partnerships that go beyond
traditional black-and-white ways of acting and thinking. An attitude of openness that invites you to co-create new things rather enabling you than just
providing. We are optimistic and resourceful in finding solutions that inspire
our customers and partners.
This set of fundamental values adds up to an unrivaled performance orien-
tation to constantly strive for the better, be it through big or small changes.
A true sense of business regardless of function. And a deep commitment to
delivering our promise everyday. Anywhere. Again and again.
INVENTING FOR YOU.
06 Polyols and Aspartics
Flexible Packaging 07
Building blocks for
supply security, efficiency
and sustainability
Outstanding quality and supply security
worldwide
High coating performance
enabled by nature
Covestro, the worlds leading manufacturer of
Sustainability drives innovation at Covestro. We
extensive range of raw materials and services for
processes, reducing the impact of logistics, and
aliphatic and aromatic isocyanates, offers an
the coatings and adhesives industry. This allows
are committed to optimizing our manufacturing
enabling sustainability along the value chains.
the very latest technology to be used extremely
Renewable feedstocks offer opportunities for
to its unique setup and worldwide network of
coating solutions with significant potential for
effectively for a variety of applications. Thanks
state-of-the-art production sites, R&D facilities
and customer technical centers, industry-leading
developing more sustainable building blocks for
reducing the carbon footprint of end products
while also reducing our overall dependence
supply chain setup, global orientation and local
on fossil-based resources. But to make more
health, safety and environmental (HSE) standards,
economically feasible, the performance of all
stocks, extremely large product portfolio, highest
sustainable solutions not just possible but also
as well as tailored supply chain flexibility with
our feedstocks needs to satisfy high industry
unrivaled supply security and assured quality.
of renewable raw materials and will enlarge our
Solutions to enhance your process efficiency
long-term cost-competitive products, provided
short lead times, Covestro offers the industry
standards. To this end, we are evaluating the use
product portfolio with new bio-based and mid- to
Nowadays, the quality demands made on indust-
the raw materials become commercially available.
there is a clear need to cut costs. Both goals can
on products that perform at least as well as estab-
At Covestro we have a wide range of solutions
sustainable.
rial processes are very high. But at the same time,
be achieved by increasing process efficiency.
designed to enhance your process efficiency.
Why not take advantage of our know-how? These
solutions will be good for your bottom line.
In all these efforts we are committed to focusing
lished products but are at the same time more
08 Polyols and Aspartics
Polyols and Aspartics 09
Applications
Polyols
Highlights
The reaction partners
Pioneering polyurethane chemistry
Ever since the discovery by Otto Bayer of the
Desmophen, the other powerful combination
Bayer now Covestro has pioneered polyu-
high-quality polyurethane raw materials for
polyisocyanate-polyaddition process in 1937,
decades. An impressive variety of product combi
polyisocyanates for the coatings and adhesives
in the development of coating systems, casting
sectors. We work closely with our customers to
Flexible adhesives
Coatings for agricultural
equipment
systematically advance the state of the art in
demands for greater efficiency and improved
we want to continue our successful journey along
of the Desmophen NH polyaspartics. When
research and development, we specifically adapt
combined with Desmodur polyisocyanates, the
outcome is high-quality poly-urea systems that
are also extremely efficient in the final application.
The Acclaim and Baycoll portfolio has been
ponse to the widespread demand for high-quality
ments in the field of adhesive and sealant appli-
regarded in such applications as a formulation
specifically developed to meet system require-
portfolio has been significantly expanded in res-
polyurethane raw materials. Desmophen C is
cations. The unique Impact technology enables
component and synthesis building block for the
that is far more energy-efficient than convention-
thane systems.
al processes. This conservation of resources is
a very important step in the further development
production of durable, weather-stable polyure
How to find the product you need
of sustainable production. In addition, extremely
The design of the brochure and the arrangement
not possible with conventional processes. These
take into account the trend towards high-solids
formulate sealants with outstanding mechanical
products are arranged under these headings
long-chain polyethers can be obtained that are
polyurethane building blocks can be used to
Large vehicle coatings
quality. This is demonstrated by the development
The Desmophen C polycarbonate diol product
polyether polyols to be produced in a process
Coatings for glass
activities we take full account of changing market
Acclaim polyethers and Baycoll polyesters are
powerful combination partners for Desmodur.
Parking decks
aim is to systematically expand these combina-
our product portfolio to our customers increas-
Acclaim and Baycoll
Coatings for plastics
systems and, of course, surface coatings. Our
tion possibilities. In our product development
this path.
Sealant applications
nations allows almost unlimited design scope
polyurethane technology. Using market-oriented
ingly stringent requirements. Together with you,
Coatings for bridges
partner for Desmodur, has stood for reliable,
rethane chemistry. 50 years ago, Bayer now
Covestro developed the first applications using
Parquet coatings
Desmophen
properties, for example.
of the products into the respective categories
and solvent-free polyurethane systems. The
according to their OH content or OH number,
irrespective of the name. The technical product
data are intended to provide clear orientation.
Additional information can, of course, be obtained
from the respective technical information sheets
or provided on request.
10 Polyols and Aspartics
Polyols and Aspartics 11
Desmophen
Baycoll
Polyester polyols based on a variety of building blocks can be
used to formulate polyurethane compounds and systems with
a wide range of properties.
Desmophen polyester optimized for coating applications.
Baycoll polyester designed for adhesives applications.
OH CONTENT (SUPPLY
FORM) [%] APPROX.
Polyester
solvent-free, linear, liquid
GRADE
AT TEMP.
[C]
VISCOSITY
[mPa s] APPROX.
PROPERTIES &
APPLICATION
MAIN CHARACTERISTIC
BUILDING BLOCKS*
Desmophen 1700
Linear polyester polyol
1.3
17,500
23
ALI
Flexibilizing resin to improve toughness, durability and abrasion resistance
of furniture, floor and parquet coatings
Desmophen 1652
Linear polyester polyol
1.6
11,000
23
ALI
Polyol for flexible sealants; also for plastics coatings incl. soft-touch
Baycoll AD 2055
Linear polyester polyol
1.7
630
75
ALI
Flexible packaging, adhesion (+), hydrolysis resistance (++),
slip agent compatibility (+++)
Baycoll AD 2047
Linear polyester polyol
1.7
7,000
75
ALI/ARO
Flexible packaging, adhesion (+++), hydrolysis resistance (++),
slip agent compatibility (+++), viscosity ()
Baycoll CD 2084
Linear polyester polyol
2.5
120
75
ALI/ARO
Flexible packaging, adhesion (+), hydrolysis resistance (+),
slip agent compatibility (+), viscosity (+), compatibility (+)
Linear, short-chain polyester polyol
800
23
ALI
Linear polyester polyol
8.5
410
75
ALI/ARO
0.9
2,800
75
ALI
Desmophen VPLS 2328
Desmophen 850
For highly elastic PU coatings; also in combination with hard Desmophen products
as a flexibilizing component in 2K-PU systems; transparent cast systems
In combination with other Desmophen products for 2K-PU coatings
Polyester solvent-free, linear, solid
Baycoll AD 5027
Linear polyester polyol
Flexible packaging, adhesion (+), PVC (+++), hydrolysis resistance (++), slip agent
compatibility (), hotmelt
* ALI = aliphatic
ARO = aromatic
12 Polyols and Aspartics
Polyols and Aspartics 13
Desmophen
Baycoll
Branched polyester grades for an optimized
polyurethane network.
Polyester
solvent-free,
branched, liquid
OH CONTENT (SUPPLY
FORM) [%] APPROX.
GRADE
AT TEMP.
[C]
VISCOSITY
[mPa s] APPROX.
PROPERTIES &
APPLICATION
MAIN CHARACTERISTIC
BUILDING BLOCKS*
For highly elastic coatings for rubber and plastic articles; also for elastic high-build,
textile and hose coatings
Desmophen 1800
Slightly branched polyester polyol
1.8
21,500
23
ALI
Baycoll AV 2113
Highly branched polyester polyol
3.3
650
75
ALI/ARO
PVC adhesion, hydrolysis resistance (++), slip agent compatibility (+)
Desmophen 670
Slightly branched polyester polyol
4.3
2,200**
23
ALI/ARO
For flexible, weather-stable and colorfast coatings, especially for plastics;
for the flexibilization of hard Desmophen products
Desmophen 1200
Slightly branched polyester polyol
23,500
23
ALI/ARO
Mixed with highly branched Desmophen products and in combination with
Desmodur L, HL, IL or N in 2K-PU coatings for wood and various plastics
Desmophen 1100
Branched polyester polyol
6.5
30,500
23
ALI/ARO
Mixed with highly branched Desmophen products and in combination with
Desmodur L, HL, IL or N in 2K-PU coatings for wood and various plastics
Desmophen 2400 S
Highly branched polyester polyol
6.6
30,500
23
ALI/ARO
Flexible packaging, adhesion (+), slip agent compatibility (+)
Desmophen 2450 X
Branched polyester polyol
6.6
20,000
25
ALI/ARO
Combination resin to adjust flexibility and hardness
Desmophen 800
Branched polyester polyol
8.6
850***
23
ALI/ARO
For air-drying 2K coatings yielding hard, chemically resistant films;
high impact resistance, toughness and abrasion resistance; in combination
with Desmophen 1100 for highly abrasion-resistant floor coatings
Desmophen VPLS 2249/1
Highly branched, short-chain polyester polyol
15.5
1,900
23
ALI
Polyol for aliphatic, solvent-free coatings, e.g. decorative floors and transparent
cast systems
Desmophen XP 2488
Branched polyester polyol
16.0
12,250
23
ALI
For solvent-free coatings, e.g. in-mould coatings and very high solids
2K-PU coatings
* ALI = aliphatic
ARO = aromatic
** 80% in BA
*** 70% in MPA
14 Polyols and Aspartics
Polyols and Aspartics 15
Desmophen
Branched, solventborne polyester grades for numerous
high-performance coating applications; supplied in suitable
solvent grades for various application techniques.
SUPPLY FORM
SOLID CONTENT [%]
Polyester
solventborne, branched
GRADE
VISCOSITY
[mPa s] APPROX.
OH CONTENT (SUPPLY
FORM) [%] APPROX.
MAIN CHARACTERISTIC
BUILDING BLOCKS*
AT TEMP.
[C]
PROPERTIES &
APPLICATION
Desmophen 690 MPA
Branched polyester polyol
70 MPA
1.4
10,000
23
ALI/ARO
Weather-stable and colorfast specialty resin, e.g. to improve adhesion on PVC
Desmophen T 1665 SN/IB
Slightly branched polyester polyol
65 SN/IB
1.7
2,700
23
ALI/ARO
Combination resin for baking primers, automotive primer surfacers, can/coil
coatings and industrial coatings with very good weather stability
Desmophen 680 X
Branched polyester polyol
60 X
1.8
2,750
23
ALI/ARO
For fast-drying, weather-stable coatings, especially for industrial and
transportation applications
Desmophen T 1775 SN
Slightly branched polyester polyol
75 SN
3,700
23
ALI/ARO
Co-reactant for blocked polyisocyanates for can/coil and industrial coatings
Desmophen 680 BA
Branched polyester polyol
70 BA
2.2
3,000
23
ALI/ARO
For fast-drying, weather-stable coatings, especially for industrial and
transportation applications
Desmophen 670 BA
Slightly branched polyester polyol
80 BA
3.5
3,000
23
ALI/ARO
For flexible, weather-stable and colorfast coatings, especially for plastics;
for the flexibilization of hard Desmophen products
Desmophen VP LS 2388
Slightly branched polyester polyol
80 BA
3.8
3,000
23
ALI/ARO
For flexible 2K-PU coatings with QUV stability (UV-B) and chemical resistance,
especially for plastics; for flexibilizing of hard Desmophen products
Desmophen 650 MPA
Branched polyester polyol
65 MPA
5.3
20,000
23
ALI/ARO
For weather-stable, colorfast and chemically resistant coatings, primarily for
transportation and aircraft applications and high-grade industrial finishing
Desmophen 651 MPA
Branched polyester polyol
65 MPA
5.5
14,500
23
ALI/ARO
Properties largely comparable with Desmophen 650; better compatibility with
other binders in aromatic solvents; for barrier coating on tropical woods
Desmophen 651 MPA/X
Branched polyester polyol
67 MPA/X
5.5
25,000
23
ALI/ARO
Properties largely comparable with Desmophen 650; better compatibility with
other binders in aromatic solvents; for barrier coating on tropical woods
Desmophen 800 80% BA
Highly branched polyester polyol
80 BA
6.9
3,500
23
ALI/ARO
For air-drying 2K coatings yielding hard, chemically resistant films; high impact
resistance, toughness and abrasion resistance; in combination with Desmophen
1100 for highly abrasion-resistant floor coatings
Desmophen 800 MPA
Highly branched polyester polyol
85 MPA
7.5
11,000
23
ALI/ARO
For air-drying 2K coatings yielding hard, chemically resistant films; high impact
resistance, toughness and abrasion resistance; in combination with Desmophen
1100 for highly abrasion-resistant floor coatings
Desmophen VPLS 2089
Branched polyester polyol
75 BA
6.0
10,000
23
ALI/ARO
In combination with Desmodur N 75, N 3390 and N 3600 very good weathering
properties and gloss retention. Due to the high crosslinking ratio good solventand chemical resistant
Desmophen 631 MPA
Branched polyester polyol
75 MPA
6.3
19,500
23
ALI/ARO
In combination with Desmodur N 3200 in two-component polyurethane coatings
where higher solids (lower VOC) are needed. These coatings possess outstanding gloss retention, light stability, and good chemical and abrasion resistance
* ALI = aliphatic
ARO = aromatic
16 Polyols and Aspartics
Polyols and Aspartics 17
Desmophen
Fatty acid-modified polyester grades for
improved compatibility.
Polyester
solventborne,
branched, fatty
acid-modified
OH CONTENT (SUPPLY
FORM) [%] APPROX.
SUPPLY FORM
SOLID CONTENT [%]
AT TEMP.
[C]
VISCOSITY
[mPa s] APPROX.
PROPERTIES &
APPLICATION
MAIN CHARACTERISTIC
BUILDING BLOCKS*
Desmophen PL 800 X
70 X
2.5
1,500
23
ALI/ARO
Low molecular weight polyester, good pigment wetting, gloss
Desmophen PL 300 X
60 X
2.7
5,350
23
ALI/ARO
Reactive polyester, air-drying 2K-PU coating; especially for wood in combination
with Desmodur L, IL grades
Desmophen 1300 EA
70 EA
3.0
300
23
ALI/ARO
For fast-drying 2K coatings for wood, chipboard and fiberboard; for clear and
pigmented primers, primer surfacers and topcoats
Desmophen 1300 BA
75 BA
3.2
1,000
23
ALI/ARO
For fast-drying 2K coatings for wood, chipboard and fiberboard; for clear and
pigmented primers, primer surfacers and topcoats
Desmophen 1300 X
75 X
3.2
3,450
23
ALI/ARO
For fast-drying 2K coatings for wood, chipboard and fiberboard; for clear and
pigmented primers, primer surfacers and topcoats
Desmophen PL 817
75 X/MEK
3.3
10,000
23
ALI/ARO
Non-drying, in combination with other resins, good hardness and for dull
finish top coat
71 EA
4.7
950
23
ALI/ARO
Improved hardness, for 2K-PU coatings for wood in combination with
Desmodur IL, L or N grades
Desmophen 1388 EA
* ALI = aliphatic
ARO = aromatic
Legend:
EA
= Ethyl acetate
BA
= Butyl acetate
MPA = Methoxy propyl
acetate
SN
= Solvent naphtha
IB
= Isobutanol
X
= Xylene
MIBK = Methyl isobutyl
ketone
MEK = Methyl ethyl ketone
EO
= Ethylenoxide
18 Polyols and Aspartics
Polyols and Aspartics 19
Desmophen
Acclaim
Building blocks with advantages in hydrolysis resistance and
flexibility. The Impact catalytic process delivers nearly perfect
products, even in unusual molecular weight ranges.
MOLECULAR WEIGHT [g/mol]
APPROX
Polyether diol*
OH NUMBER [mg KOH/g]
APPROX.
PROPERTIES &
APPLICATION
VISCOSITY AT 25 C
[mPa s] APPROX.
Desmophen 1262 BD
260
430
70
Flexible packaging, low molecular weight product
Desmophen L 300
190
590
120
Flexible packaging + EO tipped
Desmophen 1110 BD
112
1,000
140
Flexible packaging
Desmophen 1111 BD
112
1,000
155
Flexible packaging, odorless, compatibility (++)
Desmophen 2061 BD
56
2,000
345
Sealants, flexible packaging, odorless, compatibility (++)
Desmophen 2060 BD
56
2,000
310
Sealants, flexible packaging, compatibility (++)
Desmophen 4028 BD
28.5
3,950
870
Sealants, flexible packaging, compatibility with
PMDI (++) + EO tipped
Desmophen 5168 T
28
4,000
870
Sealants, flexible packaging, compatibility with
PMDI (++) + EO tipped
Acclaim Polyol 4200
28
4,000
980
Sealants, flexible packaging, compatibility (++)
Acclaim Polyol 8200 N
14
8,000
2,850
Sealants
Acclaim Polyol 12200 N
10
11,200
6,000
Sealants
Acclaim Polyol 18200 N
18,700
23,000
Sealants
* These products represent
only a selection of the entire
polyether portfolio.
Additional polyether
products can be found, for
example, on the
Covestro CAS website:
www.coatings.covestro.com
20 Polyols and Aspartics
Polyols and Aspartics 21
Desmophen
Acclaim
Branched polyether grades for improving the
properties of PU systems.
MOLECULAR WEIGHT [g/mol]
APPROX
Polyether triol*
OH NUMBER [mg KOH/g]
APPROX.
PROPERTIES &
APPLICATION
VISCOSITY AT 25C
[mPa s] APPROX.
Desmophen 4011T
550
300
1,800
Desmophen 1400 BT
400
420
370
Flexible packaging, compatibility (++), long pot life, short reaction time
Desmophen 1380 BT
385
440
600
For solvent-free coatings with good chemical resistance
Desmophen 1381 BT
385
440
600
Lower acidity than 1380 BT
Desmophen 28HS98
233
720
250
Desmophen 3061 BT
56
3,000
500
Baygal 70RE30
56
3,000
480
Desmophen 4042 BT
44.5
3,700
790
Desmophen 5034 BT
35
4,800
860
Sealants, flexible packaging, standard polyether for 1- and 2-component systems
Desmophen 5035 BT
35
4,800
860
For flexible coatings and surface membranes; flexible
packaging, 2-component systems
Acclaim Polyol 6300
28
6,000
1,500
Sealants
20
2,800
5,500
Contains 43% styrene acrylnitrile copolymer
Sealants, flexible packaging
Polyether filled triol*
Desmophen 5029 GT
* These products represent
only a selection of the
entire polyether portfolio.
Additional polyether
products can be found,
for example, on the
Covestro CAS website:
www.coatings.covestro.com
22 Polyols and Aspartics
Polyols and Aspartics 23
Desmophen C
Desmophen C where softness and toughness meet flexibility
combined with high-end resistance to improve PU systems with
respect to hydrolysis, oxidative and thermal impacts.
SUPPLY FORM
SOLID CONTENT [%]
GRADE
VISCOSITY [mPa s]
APPROX.
OH CONTENT
[%] APPROX.
Polycarbonate diol
SOLIDIFICATION C
AT TEMP. C
PROPERTIES &
APPLICATION
EQUIVALENT WEIGHT
APPROX.
Desmophen C 1100
Polyester-polycarbonate diol
100
3.3
3,200
23
15
515
Low viscous grade, good compatibility, building block for polymer
synthesis, flexible and weather-stable sealants and coatings; cast
systems, soft-touch and self-healing
Desmophen C 1200
Polyester-polycarbonate diol
100
1.7
16,500
23
15
1,000
Low viscous grade, good compatibility, building block for polymer
synthesis, flexible and weather-stable sealants and coatings; cast
systems, soft-touch and self-healing
Desmophen C 3100 XP
Polycarbonate diol
100
3.3
500
75
24
515
Better solvent compatibility, building block for polymer synthesis,
flexible and weather-stable sealants and coatings; cast systems,
soft-touch and self-healing
Desmophen C 3200 XP
Polycarbonate diol
100
1.7
2,300
75
1,000
Better solvent compatibility, building block for polymer synthesis,
flexible and weather-stable sealants and coatings; cast systems,
soft-touch and self-healing
Desmophen C XP 2716
Polycarbonate diol
100
5.2
4,000
23
24
326
Low molecular weight, low viscosity, building block for polymer
synthesis, flexible and weather-stable sealants and coatings;
cast systems, soft-touch and self-healing
Desmophen C 2100
Polycarbonate diol
100
3.3
410
75
3362
515
Building block for polymer synthesis, flexible and weather-stable
sealants and coatings; cast systems, soft-touch and self-healing
Desmophen C 2200
Polycarbonate diol
100
1.7
2,300
75
3952
1,000
Building block for polymer synthesis, flexible and weather-stable
sealants and coatings; cast systems, soft-touch and self-healing
Desmophen C XP 2613
Polycarbonate diol
100
1.7
3,500
75
1,000
Partial liquid, building block for polymer synthesis, flexible and
weather-stable sealants and coatings; cast systems, soft-touch
and self-healing
24 Polyols and Aspartics
Polyols and Aspartics 25
Desmophen NH
Desmolac
The remarkable building block tool box for highly efficient
2K polyaspartic systems at last a versatile, lightfast
polyurea system.
AMINE NUMBER
APPROX. [mg KOH/g]
Aminofunctional resins,
Aspatics for Coatings
AT TEMP. C
VISCOSITY [mPa s] APPROX.
SUPPLY FORM
SOLID CONTENT [%]
PROPERTIES &
APPLICATION
EQUIVALENT WEIGHT
APPROX.
Desmophen NH 1220
100
244
100
25
234
As binder or reactive thinner for very high-solids 2K-PU coatings
(for putty and elastomers), building block for polyaspartics
(lightfast polyurea, high reactivity)
Desmophen NH 1420
100
201
1,450
25
276
As binder or reactive thinner for very high-solids 2K-PU coatings
(for topcoats), building block for polyaspartics (lightfast polyurea,
moderate reactivity)
Desmophen NH 1422
100
201
1,450
25
276
Desmophen NH 1422 is the less reactive version of
Desmophen NH 1420
Desmophen NH 2850 XP
100
190
100
25
295
As binder or reactive thinner for very high-solids 2K-PU coatings
(for topcoats), building block for polyaspartics (lightfast polyurea,
moderate reactivity)
Desmophen NH 1520
100
191
1,400
25
290
As binder or reactive thinner for very high-solids 2K-PU coatings
(for topcoats), building block for polyaspartics (lightfast polyurea,
low reactivity)
Desmophen NH 1521
90 BA
172
160
25
326
As binder or reactive thinner for very high-solids 2K-PU coatings
(for clear- and topcoats), building block for polyaspartics
(lightfast polyurea, low reactivity)
40 X/IB
7,500
23
Non-functional resins
Desmolac 4340 X/IB
Alone or in combination with polyisocyanates for primers or finishers
for flexible substrates
26 Polyols and Aspartics
Polyols and Aspartics 27
Fast-lane access
to polyurethane
innovations
At Covestro innovation is in our DNA.
Ever since Otto Bayer discovered
polyurethanes in 1937, we have been
driving polyurethane innovations in
coatings and adhesives as well as
in other application areas. As our
partner you enjoy fast-lane access
to polyurethane innovations, and
can help us in developing the next
generation of polyurethanes to meet
the industrys upcoming challenges
and needs. What can we offer you?
Powerful know-how on both
established and new polyisocyanates, as well as on new poly
urethane hybrid technologies.
The prospect of new application
technologies to enable efficient
processes.
More sustainable, biomass- or
CO2-based materials that do not
sacrifice high performance.
Join us to shape the future!
