Model code of safe practice

Part 15
Area classification for installations handling
flammable fluids

4th edition

MODEL CODE OF SAFE PRACTICE PART 15

AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
4th edition
June 2015

Published by
ENERGY INSTITUTE, LONDON
The Energy Institute is a professional membership body incorporated by Royal Charter 2003
Registered charity number 1097899

The Energy Institute (EI) is the chartered professional membership body for the energy industry, supporting over 20 000 individuals
working in or studying energy and 250 energy companies worldwide. The EI provides learning and networking opportunities to support
professional development, as well as professional recognition and technical and scientific knowledge resources on energy in all its forms
and applications.
The EIs purpose is to develop and disseminate knowledge, skills and good practice towards a safe, secure and sustainable energy system.
In fulfilling this mission, the EI addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety,
sustainability and the environment. It also informs policy by providing a platform for debate and scientifically-sound information on energy
issues.
The EI is licensed by:

the Engineering Council to award Chartered, Incorporated and Engineering Technician status;

the Science Council to award Chartered Scientist status, and

the Society for the Environment to award Chartered Environmentalist status.

It also offers its own Chartered Energy Engineer, Chartered Petroleum Engineer and Chartered Energy Manager titles.
A registered charity, the EI serves society with independence, professionalism and a wealth of expertise in all energy matters.
This publication has been produced as a result of work carried out within the Technical Team of the EI, funded by the EIs Technical Partners.
The EIs Technical Work Programme provides industry with cost-effective, value-adding knowledge on key current and future issues
affecting those operating in the energy sector, both in the UK and internationally.
For further information, please visit http://www.energyinst.org
The EI gratefully acknowledges the financial contributions towards the scientific and technical programme
from the following companies
BG Group
RWE npower
BP Exploration Operating Co Ltd
Saudi Aramco
BP Oil UK Ltd
Scottish Power
Centrica
SGS
Chevron
Shell UK Oil Products Limited
ConocoPhillips Ltd
Shell U.K. Exploration and Production Ltd
DONG Energy
SSE
EDF Energy
Statkraft
ENI
Statoil
E. ON UK
Talisman Sinopec Energy UK Ltd
ExxonMobil International Ltd
Total E&P UK Limited
International Power
Total UK Limited
Kuwait Petroleum International Ltd
Tullow
Maersk Oil North Sea UK Limited
Valero
Nexen
Vattenfall
Phillips 66
Vitol
Premier Oil
World Fuel Services

However, it should be noted that the above organisations have not all been directly involved in the development of this publication, nor
do they necessarily endorse its content.
Copyright 2015 by the Energy Institute, London.
The Energy Institute is a professional membership body incorporated by Royal Charter 2003.
Registered charity number 1097899, England
All rights reserved
No part of this book may be reproduced by any means, or transmitted or translated into
a machine language without the written permission of the publisher.
ISBN 978 0 85293 717 4
Published by the Energy Institute
The information contained in this publication is provided for general information purposes only. Whilst the Energy Institute and the
contributors have applied reasonable care in developing this publication, no representations or warranties, express or implied, are made
by the Energy Institute or any of the contributors concerning the applicability, suitability, accuracy or completeness of the information
contained herein and the Energy Institute and the contributors accept no responsibility whatsoever for the use of this information. Neither
the Energy Institute nor any of the contributors shall be liable in any way for any liability, loss, cost or damage incurred as a result of the
receipt or use of the information contained herein.
Hard copy and electronic access to EI and IP publications is available via our website, https://publishing.energyinst.org.
Documents can be purchased online as downloadable pdfs or on an annual subscription for single users and companies.
For more information, contact the EI Publications Team.
e: [email protected]

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

CONTENTS

Page

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Key technical changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.2 Limits of applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.3 Application of this Model Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.4 Area classification management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.5 Key terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.6 Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

1.7 Buoyancy of release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2

The technique of area classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.2 Data required for the assessment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.3 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.4 Area classification approaches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.5 The area classification drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.6 Apparatus sub-group and temperature class (T class) . . . . . . . . . . . . . . . . . . . . . . . 26

The point source approach for classification of individual sources of release . . . . . 28

3.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.2 Explanation of the 'point source' concept as used in this Model Code . . . . . . . . . . 28
3.3 Methodology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.4 Point Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.5 Application of the point source approach to direct examples . . . . . . . . . . . . . . . . . 33
3.6 Equipment where release hole size is known and independent of release frequency . 33
3.7 Equipment where hole size is frequency dependent . . . . . . . . . . . . . . . . . . . . . . . . 39
3.8 Liquid pools, sumps, interceptors, separators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.9 Shape factors and hazard radii for pressurised releases . . . . . . . . . . . . . . . . . . . . . . 43

Effect of ventilation on area classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4.2 Outdoor areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4.3 Enclosed areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4 Design considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.5 Effect of ventilation on classification of enclosed areas . . . . . . . . . . . . . . . . . . . . . . 56
4.6 Enclosed areas with no source of internal release within or adjacent
to a hazardous area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

Contents continued...

Page

Annexes
Annex A Classification and categorisation of petroleum and flammable fluids . . . . . . 59
A1
EI Classification of petroleum, based (except for liquefied petroleum gases,

LPG) on closed cup flash points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

A2
Relationship between petroleum class and fluid category . . . . . . . . . . . . 63
Annex B

Area classification for hydrogen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Annex C Calculation of hazard radii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Part 1 Background to the calculation of hazard radii in Chapter 3 . . . . . . . . . . . 67

C1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Part 2 Risk-based approach to area classification . . . . . . . . . . . . . . . . . . . . . . . . 76

C2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Part 3 Background to risk-based approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

C3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Annex D The direct example approach for classification of common facilities
in open areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

D1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

D2
Petroleum Class 0 (LPG or similar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

D3
Petroleum Classes I, II, III and Unclassified . . . . . . . . . . . . . . . . . . . . . . . . 94

D4
Transportable container filling and storage . . . . . . . . . . . . . . . . . . . . . . 123

D5
Retail service stations and fuel dispensing facilities . . . . . . . . . . . . . . . . . 125

D6
Vehicle repair, servicing areas and inspection pits . . . . . . . . . . . . . . . . . . 131

D7
Drilling rigs, equipment and well operations . . . . . . . . . . . . . . . . . . . . . 132
Annex E Small-scale operations (laboratories and pilot plants) . . . . . . . . . . . . . . . . . . 145

E1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

E2
Hazards associated with particular classes of material . . . . . . . . . . . . . . 146

E3
Pilot plants and large scale laboratories . . . . . . . . . . . . . . . . . . . . . . . . . 146
Annex F Background and examples on ventilation of enclosed areas, releases
within enclosed areas and associated external hazardous areas . . . . . . . . . 147

F1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

F2
Natural ventilation of enclosed areas . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

F3
Adequate ventilation of enclosed areas . . . . . . . . . . . . . . . . . . . . . . . . . 149

F4
Examples of assessment of adequate ventilation . . . . . . . . . . . . . . . . . . 151

F5
External hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Annex G Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Annex H References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

LIST OF FIGURES AND TABLES

Figures
Figure1.1 Application of code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure2.1 Hazardous area zone classification shading convention . . . . . . . . . . . . . . . . . . . . . . 26
Figure3.1 Procedure for determining the hazard radii for primary and continuous grade releases . 31
Figure3.2 Procedure for determining the hazard radii for secondary grade releases . . . . . . . . 32
Figure3.3 Typical hazardous areas around tank vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure3.4 Liquid pool due to spillage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Figure3.5 Open sump zoning for primary grade release . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Figure3.6 Shape factors for pressurised releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Figure4.1 Procedure for assessing type and degree of ventilation . . . . . . . . . . . . . . . . . . . . . . 47
Figure4.2 Zoning of congested and stagnant regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Figure4.3 Extent of hazardous area around wall producing sheltered area . . . . . . . . . . . . . . . 49
Figure4.4 Enclosed areas without an internal source of release located within or
adjacent to classified areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Figure C1 Risk-based procedure for calculation of hazard radii for secondary grade releases . . 77
Figure C2 Release frequency (LEVEL) to achieve an Individual Risk (IR) criterion of
1,0E-5 (or lower) given Exp and Pign. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Figure C3 Individual risk (/yr) vs. exposure (release frequency = 1,0E-2/release source-yr) . . . . . 88
Figure C4 Individual risk (/yr) vs. exposure (release frequency = 1,0E-3/release source-yr) . . . . . 88
Figure D1 LPG storage facilities (Class 0 product) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Figure D2 Typical composite hazardous area zone classification around LPG road
tanker during loading and unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Figure D3 Typical hazardous area zone classification for underground LPG storage tanks. . . . . 93
Figure D4(a) Bunded tanks cone or dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Figure D4(b) Small bunded horizontal storage tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Figure D4(c) Bunded tanks floating roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Figure D5 Tanks with outer protective wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Figure D6 Typical hazardous area zone classification for underground gasoline storage tanks
and fill points during road tanker connection, unloading and disconnection . . . . . . 98
Figure D7 Typical hazardous area zone classification around a storage tank vent
pipe at retail facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Figure D8 Bottom loading island, no vehicle present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Figure D9 Road tanker equipped for bottom loading with vapour collection, during loading . 103
Figure D10 Area classification in event of spillage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Figure D11 Composite area classification drawing for bottom loading road tanker
during loading in the event of a spillage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Figure D12 Top loading island and bay area no vehicle present . . . . . . . . . . . . . . . . . . . . . . 108
Figure D13 Top loading of road tanker through open or vent fill covers . . . . . . . . . . . . . . . . . 109
Figure D14 Typical Zone 2 provision for spillage area with drainage . . . . . . . . . . . . . . . . . . . . 109
Figure D15 Composite area classification drawing for top loading road tankers during loading,
in the event of a spillage Classes I, II and III products. For treatment of unoccupied
bay on right hand side in condition to receive a road tanker . . . . . . . . . . . . . . . . . 110
Figure D16 Typical hazardous area zone classification of a road tanker during unloading . . . . 113
Figure D17 Top loading of rail cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Figure D18 Bottom loading of rail cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Figure D19 Rail car unloading via hose connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Figure D20 Jetties loading facilities only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Figure D21 Jetty unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

Figures continued...
Figure D22 Container filling in an open area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Figure D23 Typical hazardous area classification around a gasoline dispenser housing . . . . . . . 126
Figure D24 Typical hazardous area zone classification around an external dispenser
air separator vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Figure D25 Typical hazardous area zone classification around a nozzle during
vehicle refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Figure D26 Typical hazardous area zone classification around nozzle spout housing . . . . . . . . 128
Figure D27 Typical composite hazardous area zone classification around a dispenser
during refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Figure D28 Typical hazardous area zone classification around an LPG dispenser
during refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Figure D29 Typical hazardous area zone classification for an oil/water separator . . . . . . . . . . . 131
Figure D30 Drilling and workover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Figure D31 Typical well cellar (land rig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Figure D32 Freestanding wireline operation (open areas) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Figure D33 Hazardous area around a shale-shaker in an open area . . . . . . . . . . . . . . . . . . . . . 140
Figure D34 Hazardous area around mud tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Tables
Table1.1
Capacity thresholds above which area classification is required . . . . . . . . . . . . . . . . 15
Table 1.2
Relationship of grade of release to zone for an open area. . . . . . . . . . . . . . . . . . . . 20
Table1.3
Fluid categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table3.1
Hazard radius (R1) from tank vent for category C fluid . . . . . . . . . . . . . . . . . . . . . . . 35
Table3.2
Hazard radius (R1) for process vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table4.1 Ventilation flow rates required to dilute average gas concentrations to 25 % LFL . . 52
Table4.2 Effect of ventilation on zone classification for enclosures with an
internal source of release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table A1 EI petroleum classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Table A2 Typical commonly encountered petroleum materials . . . . . . . . . . . . . . . . . . . . . . . . 60
Table A3 Relationship between EI petroleum class and fluid category . . . . . . . . . . . . . . . . . . 64
Table C1 Fluid compositions and LFLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Table C2 Physical parameters used in dispersion modelling . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Table C3 Release flow rate (kg/s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table C4 Hazard radii R1 and R2 for pressurised releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Table C5 Spill volumes modelled (m3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table C6 Hazard radius R1 for pool spills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table C7 Parameter values used in sensitivity analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table C8 Average number of release sources in range (Nrange) . . . . . . . . . . . . . . . . . . . . . . . . 79
Table C9 Exposure calculation for plant area* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table C10 Probability of ignition (Pign) for varying sources of ignition strengths . . . . . . . . . . . . 81
Table C11 Calculation of Pign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Table C12 Categorisation of release frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Table C13 Equivalent hole sizes for a range of release frequencies . . . . . . . . . . . . . . . . . . . . . . 84
Table C14 Suggested risk criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Table F1 Classification of approaches available for estimating ventilation rates
in naturally ventilated enclosed areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Table F2 Comparison of cloud volumes above LFL for zero background
concentration and ventilation dilution to 25 % LFL . . . . . . . . . . . . . . . . . . . . . . . . 149

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

Tables continued...
Table F3 Mass flow rates and ventilation flow rates for dilution to 25 % LFL, releases
calculated using DNV PHAST and gas cloud volumes calculated from QUADVENT
(for G(i) and G(ii)), scaled from DNV PHAST free jet calculations (for other fluids) . 150
Table F4 Ventilation flow rate to dilute to 25 % LFL (adequate ventilation) . . . . . . . . . . . . . 152
Table F5 Efficiency of mixing within the enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

FOREWORD
EI Model code of safe practice Part15: Area classification code for installations handling flammable
fluids (EI15, formerly referred to as IP15) is a well-established Model Code for area classification in the
petroleum industry. It provides a demonstrable methodology for determining hazard radii, applicable
to installations handling flammable fluids. Identifying and designating areas in which there is a risk
of a flammable (explosive) atmosphere occurring is a legal duty under the Dangerous Substances
and Explosives Atmospheres Regulations 2002, (DSEAR) [which implement ATEX Directive 99/92/
EC setting minimum requirements for improving the safety & health of workers potentially at risk
from explosive atmospheres], and the Offshore Installations (Prevention of Fire and Explosion, and
Emergency Response) Regulations, 1995, (PFEER).
The fourth edition of this Model Code provides clarification on issues that have been raised by users
of the third edition since its publication in 2005 and also incorporates key findings from a number
of research studies commissioned by the EI. In addition, further editorial changes have been made.
The Model Code applies dispersion modelling to the calculation of hazard radii, taking into account
variables such as pressure of release and the effect of mist or spray formation. The current methodology
takes account of both the composition of the material released and its release conditions including
the release pressure, together with sensitivity to various operating parameters.
The Model Code also provides a risk-based approach for specifying hazardous areas from secondary
grade sources of release, allowing further flexibility in specifying hazard radii. Whilst the Model Code
includes the basis of the risk-based approach, the full methodology is provided in the publication EI
A risk-based approach to hazardous area classification, 2nd edition, 2015.
The information contained in this publication is provided for information only and while every
reasonable care has been taken to ensure the accuracy of its contents, the EI cannot accept any
responsibility for any action taken, or not taken, on the basis of this information. The EI shall not
be liable to any person for any loss or damage which may arise from the use of the information
contained in any of its publications.
The above disclaimer is not intended to restrict or exclude liability for death or personal injury caused
by own negligence.
Suggested revisions are invited and should be submitted to the Technical Department, Energy
Institute, 61 New Cavendish Street, LONDON W1G 7AR.

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

KEY TECHNICAL CHANGES

This section sets out in a generalised form, a summary of the key technical changes between the third
and fourth editions of EI15.
The key technical changes comprise:
1.
Emphasis being placed on the use of the point source approach for area classification and
relocation of direct examples to Annex D.
2.
Amendments to the point source approach amended hazard radii for secondary grade
releases from pumps, compressors, flanges and valves (based upon revised equivalent hole
sizes); along with amended hazard radii from pool spills.
3.
Annex C, calculation of hazard radii, has been reordered and restructured to aid user

understanding.
4.
Examples on how to assess whether ventilation is adequate are provided.
5.
Expansion of Annex F on ventilation and releases within enclosed areas to include pertinent
findings in HSE Research Report: Technical input on ventilation effectiveness for area
classification guidance EI15.
6.
Amendments to guidance on ventilation of hazardous areas. Amended definition of adequate
ventilation and other key findings from HSE Research Report Technical Input on ventilation
effectiveness for area classification guidance EI15. Based on this work some sections have
been restructured and sections which are no longer technically valid have been deleted.
7.
Incorporation of conclusions in EI Research Report: Dispersion modelling and calculations in
support of EI Model code of safe practice Part15: Area classification code for installations
handling flammable fluids, including a sensitivity analysis to various parameters.
8.
Incorporation of further background technical information on hazard radii from pool spills.
9.
Incorporation of hazard radii and background information for LNG releases.
10. Revised equivalent hole sizes for frequency bands (LEVEL I III), based on analysis of the HSE
Hydrocarbon Release Database (HCR).
11. Amplification of the discussion of the limits of applicability of the Model Code.
12. Amplification of the discussion of grades of release, particularly with reference to detection
times.
13. Revision of the guidance on the formation of flammable mists, noting further research into
this subject is ongoing.
14. Guidance and recommendations on equipment design, information on protection concepts
and fired process heaters and guidance on equipment selection and non-electrical sources of
ignition have been removed and incorporated into EI Model code of safe practice Part1: The
selection, installation, inspection, and maintenance of electrical and non electrical apparatus
in hazardous areas.

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

ACKNOWLEDGEMENTS
The EI wishes to record its appreciation of the work carried out by the following individuals:
Ian Buckland
Howard Crowther
Jon Ellis
Tony Ennis
Paul Evans
Geoff Fulcher
Kieran Glynn
Matthew Ivings
Mohan Karmarkar
Peter Murdoch
Toni Needham
Peter Nichols
Mick Robinson
Steve Sherwen
Roger Santon
Chris Turney
Mick Wansborough

Health and Safety Executive

Consultant
Phillips66
Haztech Consultants
Valero
F.E.S. (EX) Limited
BP
Health and Safety Laboratory
Consultant
CSA Group Testing UK Ltd
Energy Institute
KCA-Deutag Ltd
F.E.S. (EX) Limited
ABB
Health and Safety Laboratory
F.E.S. (EX) Limited
Consultant

It also wishes to recognise the contribution made by those individuals, companies and organisations
that provided comments since publication of the 3rd edition which have resulted in this revised edition.

10

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

OVERVIEW
GENERAL: This Model Code presents approaches to be used in area classification: the point source
approach, where release rates are dependent on process conditions, and the direct example approach,
which is limited to common facilities. The risk-based approach is included within the point source
approach for a risk-based methodology for determining unknown release hole sizes for secondary
grade releases, where actual hole size is not available.
CHAPTER 1: Establishes the scope of the Model Code and defines key terms. It indicates a means of
defining flammable fluids for area classification purposes by their flash points and, where extremes of
volatility, temperature and pressure occur, by fluid category. Figure1.1 provides a guide to applying
the Model Code and selecting the appropriate approach to be used.
CHAPTER 2: Identifies the information required to classify a hazardous area and explains the
technique of area classification by use of either the point source or direct example approach. It also
describes the area classification drawing.
CHAPTER 3: Describes the point source approach and provides the basis for the hazard radii specified
throughout the Model Code. These are based on the results of dispersion modelling published in EI
Research report: Dispersion modelling and calculations in support of EI Model code of safe practice
Part15: Area classification code for installations handling flammable fluids, which allows for variations
in release rates and operational pressures. A risk-based approach is also provided for determining the
extent of Zone 2 hazardous areas where release hole sizes are not specified.
CHAPTER 4: Provides guidance on the effect of ventilation on hazard radii and zone classification in
non-open areas. The different degrees of ventilation are described and Figure4.1 provides a procedure
for assessing the type and degree of ventilation for given situations. Open areas, sheltered areas and
enclosed areas are defined and the application of area classification to each situation is described.
Methods of artificial ventilation and the effect of loss of ventilation on the area classification are
discussed.
ANNEX A: Provides background information on EI classes of petroleum, and their relationship to the
fluid categories used in this Model Code. Implications of flammable fluids being released as a mist or
spray are discussed.
ANNEX B: Summarises work done on assessing the area classification of hydrogen and hydrogencontaining streams.
ANNEX C: Presents the background to the calculation of hazard radii for release rates used in
Chapter3, based on dispersion modelling in EI Research report: Dispersion modelling and calculations
in support of EI Model code of safe practice Part15: Area classification code for installations handling
flammable fluids. Also, for use with the risk-based approach, Annex C describes the procedure for
determining appropriate release frequency for release rates, to be used in conjunction with Chapter3
and describes the background to the risk-based approach and how risk tolerability criteria are related
to release frequencies and corresponding release hole sizes.
ANNEX D: Provides direct examples, with diagrams, which can be used to classify common facilities;
distances are valid for the conditions given. However, the Annex also refers to the point source
approach in Chapter3 for variable releases (e.g. releases from tank vents).
ANNEX E: Presents a discussion on small scale operations including research and development
installations (e.g. pilot plants, laboratories, etc.) where special features will need to be considered in
assessing the fire and explosion risk, and the approach to area classification.

11

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

ANNEX F: Provides background information and examples on the assessment of ventilation of

enclosed areas. Releases within enclosed areas, such as buildings, and associated external hazardous
areas are also discussed.
ANNEX G: Glossary of terms used in this Model Code.
ANNEX H: List of references cited in this Model Code.

12

MODEL CODE OF SAFE PRACTICE PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS

1 INTRODUCTION
1.1 SCOPE
This Model Code gives guidance on the classification of areas around equipment handling or
storing flammable fluids, and provides a basis for both the correct selection of fixed electrical
equipment and the location of other sources of ignition in those areas. An 'area' in this
context is always taken to be three-dimensional. Area classification zoning restrictions should
be considered when introducing and using any temporary electrical equipment or mobile
equipment capable of generating a source of ignition, to a facility.
It is intended that the guidance given in this Model Code is applicable internationally to
installations in processing, distribution, production and retail sectors. The application of this
Model Code is limited to flammable fluids similar in physical characteristics to those occurring
in the petroleum, petrochemical and allied industries. It does not cover ignitable dusts or the
assessment of health risks due to the handling of flammable fluids.
It does not comprehensively address the releases of flammable refrigerated or cryogenic liquids,
for which the dispersion characteristics are markedly different from those of fluids at higher
temperatures. The general approach presented in the Model Code may be applied to such
releases if specific dispersion modelling, using the appropriate dispersion characteristics, is
performed. For this purpose, a limited amount of information and guidance on the hazardous
areas generated by those fluids is given. It can, however, be used for situations where vented
boil-off vapour is released at around ambient temperatures. If it is desired to consider area
classification for the liquids, it will be necessary to carry out specific calculations using suitable
dispersion models, e.g. those applied in the calculation of radii provided in Annex C Part1,
published in EI Research report: Dispersion modelling and calculations in support of EI Model
code of safe practice Part15: Area classification code for installations handling flammable
fluids.
General guidance as to the main principles, definitions and explanations of terms relating to
area classification has also been set out internationally by the International Electrotechnical
Commission (IEC) and in Europe by the European Committee for Standardization (CEN),
followed nationally by bodies such as, in the United Kingdom, the British Standards Institution
(BSI). References to standards and guidance issued by these bodies are provided throughout
this Model Code.

1.2

LIMITS OF APPLICABILITY

1.2.1 General
The area classification techniques described in this Model Code assume that the facilities to
which they are applied are designed, constructed, maintained and operated in accordance
with industry good practice so as to reduce the frequency of releases. The guidance contained
in a number of EI publications (cited in Annex H) covering good operational and maintenance
practice should also be followed.
Area classification should not be used as a prime tool in determining layout. However, aspects
of area classification may be considered in determining separation distances. Guidance as to

13