Scribd
Upload
160 views1 page

TDS 11002400 EN EN Zinc-Alu-Spray PDF

This technical datasheet summarizes the properties and application instructions of Zinc-Alu Spray, a spray that protects metal surfaces from corrosion. It forms a fast-drying protective coating of zinc and aluminum pigments in an acrylic resin binder. The spray dries within 15 minutes, can be smoothed after 12 hours, and offers abrasion resistance and protection when salt spray tested for over 24 months. Surfaces should be cleaned before application by spraying an even layer from 25 cm away.

Uploaded by

KJ Supply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views1 page

TDS 11002400 EN EN Zinc-Alu-Spray PDF

This technical datasheet summarizes the properties and application instructions of Zinc-Alu Spray, a spray that protects metal surfaces from corrosion. It forms a fast-drying protective coating of zinc and aluminum pigments in an acrylic resin binder. The spray dries within 15 minutes, can be smoothed after 12 hours, and offers abrasion resistance and protection when salt spray tested for over 24 months. Surfaces should be cleaned before application by spraying an even layer from 25 cm away.

Uploaded by

KJ Supply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Datasheet

Zinc-Alu Spray

Create Date: 06.06.2016 - Page 1/1

minutes, fully hardened after approx. 10-12 hours.

Storage
Pressurized container: protect from sunlight and do not expose to
temperatures exceeding +50C.

Note
The specifications and recommendations given in this technical data
sheet must not be seen as guaranteed product characteristics. They
are based on our laboratory tests and on practical experience. Since
individual application conditions are beyond our knowledge, control and
responsibility, this information is provided without any obligation.
We do guarantee the continuously high quality of our products.
However, own adequate laboratory and practical tests to find out if the
product in question meets the requested properties are recommended.
A claim cannot be derived from them. The user bears the only
responsibility for non-appropriate or other than specified applications.
anti corrosion protection
tone approaching hot galvanizing

Health and Safety

Zinc-Alu Spray lastingly protects all metal surfaces against rust and
corrosion. WEICON Zinc-Alu Spray forms a fast drying and adherent
protective layer and is resistant to many chemicals.
Zinc-Alu Spray is dust-dry after approx. 15 minutes and can be
smoothed and painted over without pre-treatment after around 12
hours.

Technical data
Colour

RAL 9006, "Fresh hot-dip galvanisation"

Application

Indoors and outdoors

Binding agent

Acrylic resin

Pigment

zinc and aluminium pigments

Pigment purity

about 99,5 Al / about 94,0 Zn

Percentage of metal in dry film

ca. 51 %

Content

400 ml

Specific weight

0,90 - 1,0 g/cm

Recommended primer
Processing temperature

Zinc Spray
+5 to +35, optimum temperature from +18 to + 25 C

Consumption at 1.5 cross coats

ca. 150 ml/m

Layer thickness at 1.5 cross coats

ca. 20-40 m

dust dry after

ca. 15 Min.

Hardened after

ca. 12 h

paintable

ca. 12 h

Abrasion-resistant
Cross cutting DIN 53151 / ISO 2409

abrasion-resistant
Cross cut characteristic value GT 0 to
GT 1

Salt spraying test ISO 9227

--- h

Mandrel bend test DIN EN ISO 1519

no hair cracking

Top coating
Temperature resistance after complete hardening

not required
about -50 to +300 C

Storage stability

24 months

Pretreatment of the surface


Clean and degrease surfaces with WEICON Cleaner S.

Processing
Shake can before use until the mixing ball can be heard clearly. Spray
on evenly and crosswise at room temperature (approx. 20C) and at
about 25 cm distance from the surface. Dust-dry after approx. 15

When using WEICON products, the physical, safety technical,


toxicological and ecological data and regulations in our EC safety data
sheets (www.weicon.com) must be observed.

You might also like