Powerline
Moving on up.
crane systems
ABUPowerline
This professional power supply system for overhead travelling
cranes has proved itself in practice. Thanks to economies of
scale, ABUS can now offer the ABUPowerline as
standard equipment for ABUS overhead travelling cranes.
The ABUPowerline is an innovative energy chain system
for power supply and signal transmission to hoists and pendant
controls on overhead travelling crane systems.
Signal transmission to pendant control
Signal transmission and power supply to hoist
!
w
e
Advantages compared with
conventional festoon systems
Conventional system
ABUPowerline system
Festoon systems are always inconvenient. Firstly, cable
festoons are vulnerable to damage and wear because
of their design and installation configuration. Secondly,
on low crane bridges, the cable loops fall below the
main crane girder and can easily catch and snag on
other equipment installed in the plant.
Compact design, installed directly on crane girder,
mechanical protection for cables, no dangling
cable loops and no snagging on other equipment.
The loops of a cable festoon are pushed together
on one side of the crane girder, taking up space and
restricting movement of the control carrier.
The control carrier of the mobile pendant control
can be moved over the full length of the crane girder in both directions.
Festoon systems need a separate brake trolley to
prevent the control carrier from rolling back.
The control carrier stays in position and does not
roll back.
The control carrier of an ABUPowerline system
requires a defined operating force it is therefore
automatically held in position.
Separate brake trolley
Control carrier held in position automatically
Technical features of ABUPowerline system
Guide rails
for energy chain and control carrier,
made from cold-rolled galvanized
steel sheet
For control line
For hoist unit power supply
Control carrier
Control carrier with cross arm
Energy chain
made from glass-fibre-reinforced
plastic with excellent sliding and
rolling properties
Control lines
highly flexible special cables
designed for a large number of
bending cycles
Roller blocks
for optimising the operating force
of the mobile control carrier
Control carrier
with 12 ball bearings for smooth
movement even with long control
lines or high lifts
Moving on up.
crane systems
A special advantage of the patented ABUPowerline system
compared with other energy chains
Other systems
ABUPowerline system
The control carrier for the mobile pendant control
moves along the top of the painted main girder,
restricting the maximum height of the crane (upper
edge of crane unit). Another major disadvantage is
that this type of control carrier cannot be used on
twin-girder travelling cranes.
The control carrier for the mobile pendant control
runs along a guide rail installed on the side of the
crane girder. There is therefore no restriction on
the maximum crane height (upper edge of crane).
Power is supplied and signals are transmitted via contact conductors with exposed contacts which are subject to considerable wear.
There is no wear on the power supply and signal
transmission systems. No maintenance is required.
Extra useful
hook height
ABUPowerline system.
For professional overhead travelling cranes.
Now standard equipment.*
For the benefit of our customers.
* For design reasons, the conventional festoon system is still used on cranes for
outdoor operation and on certain special underslung overhead travelling crane versions.
Moving on up.
crane systems
The ABUS range at a glance
Overhead travelling cranes:
Load capacity:
up to 100 t
Span:
up to 36 m (depending on load capacity)
Applications:
area coverage
Features:
comprehensive standard equipment and wide
range of accessories to suit individual requirements
HB systems:
Load capacity:
up to 2 t
Crane girder length:
up to 22 m (depending on load capacity)
Applications:
area coverage and linear handling
Features:
highly versatile for adaptation to individual
applications, designed for modular extension,
wide range of suspension hangers, low headroom
options, comprehensive standard equipment and
wide range of accessories
Jib cranes:
Load capacity:
up to 6.3 t
Jib length:
up to 10 m (depending on load capacity)
Applications:
swept area coverage, mainly for use in loading
or workbench applications
Features:
slewing range up to 360 depending on model
Electric wire rope hoists:
Load capacity:
up to 100 t
Features:
compact dimensions, two lifting and travel speeds
as standard feature, comprehensive standard
equipment and wide range of accessories
Electric chain hoists:
Load capacity:
up to 4 t
Features:
low headroom configuration, two lifting speeds
as standard feature, comprehensive standard
equipment, ready for installation, wide range of
accessories
Lightweight portal cranes:
701802//1.07
Load capacity:
Features:
up to 2 t
with four stop rollers, easy to move, height and
width individually adaptable
ABUS Crane Systems Ltd. Unit 1 Business Village
Blackbushe Business Park Yateley Hampshire GU46 6GA
Phone (01252) 749 000 Fax (01252) 749 001
e-mail:
[email protected] www.abuscranes.co.uk
Moving on up.
crane systems
